Used Demag Ropeguide P for sale (41,152)

Condition: excellent (used), 2 identical DEMAG hoists / electric wire rope hoists P625 H8 2/1, load capacity 5t, and P35 H8 2/1, load capacity 5t. Both equipped with fine lifting FG24 and 5t lower block. Both units underwent a complete general overhaul at the same time in 08/2003! Stored since then, without documentation, though the gear type plate contains the relevant information. Rcsdev T Twkepfx Alaof

Year of construction: 1978, condition: good (used), machine/vehicle number: 2252928, load bearing: 500 kg number of burden strings: 1 stroe speed: 10 m/min electrical connection: 380 V, 1/0,25 kW weight: 69 kg Rjdpfobpgvwjx Alajcf

Year of construction: 1991, condition: used, machine/vehicle number: 149125/95, Max. operating pressure: 8 bar Delivery rate: 2.51 m³/min Drive motor: 380/660 V, 15 kW Space requirement: 820 x 950 x 1200 mm (height) Rjdpfeby Hpbsx Alajcf Weight: 360 kg Surge tank, manufacturer: KAESER, year of manufacture: 1999 Capacity: 1000 l Max. operating pressure: 11 bar Space requirement: 800 Ø x 2300 mm (height)

Condition: good (used), functionality: fully functional, Year of construction: 1992, main lifting speed: 12,000 mm/min, fine lifting speed: 2,000 mm/s, -KOM 3160- Offered here is a Demag industrial lifting crane. This crane can lift loads up to 80 kg. In addition to the crane, you will receive the corresponding motor unit including the chain hoist, consisting of the chain and hook block. The dimensions can be found in the last image. The inspection logbook will be provided upon purchase. Type: PM V8 V1 F6 Year of manufacture: 1992 Number of load strands: 1 Rcsdpexcnmnefx Alaef Main lifting speed (m/min): 12 Fine lifting speed (m/min): 2 kW: 0.2 / 0.03 Protection class: IP 54

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 1099883, operating hours: 100 h, Demag end carriage pair End carriage DRS315 Hoist unit EZ DR20 Trolley gauge 2240 mm Reeving 4/1 The crane shows virtually no wear, very little use in a machine construction factory. Dismantled in July 25 and stored dry. Rodpfew H S Avox Alaocf Complete with documentation and HBC Spectrum radio remote control. All motions with frequency inverter! Modifications can be offered separately.

Condition: used, Electric chain hoist, electric lifting unit, crane DEMAG Type PKVUN1 V1 Serial No. 63409464 Year of manufacture: 1993 Rated load: 250 kg Hook travel: 5 meters Distance from suspension to load hook: 400 mm Main lifting speed: 4 m/min Precision lifting speed: 1 m/min Rsdpfx Aljyv H Efeajcf Pendant control cable length: approx. 1.7 meters 2 load strands = 250 kg - Emergency stop Power supply: 380 Volt, 50 Hz Weight: 20 kg Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: LS14 + RIO RES, Technical Data: 1x Demag KBK 2 pillar slewing crane NL 500KG with Demag PK chain hoist There are 4 cranes available!! Load capacity at full outreach: 500KG Height: approx. 3.55m Underside of jib: approx. 3m Outreach: 3m Hook height: approx. 2.6m Total weight: approx. 300KG With 500KG Demag PK chain hoist Incl. bolts, cable trolley, trolley, end cap, etc. Slewing range 300°, connection to 400V 16A Rcodpfxsywfl Ts Alaef Crane is dismantled and immediately available Item location: 75053 Gondelsheim, Germany Further cranes with capacities 80-5000Kg available – please inquire See pictures Shipping via freight forwarding or collection only by appointment

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Rodpex D Hntsfx Alascf Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm Rcsdpfx Asyfq Alolaof • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Rcedpox D Nxzofx Alaef Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN

Condition: used, Electric chain hoist, DEMAG crane Type PK2N-F Serial no.: 5785034 Year of manufacture: 1988 Load capacity: 500 kg Hook travel: 5 metres Main lifting speed: 5 m/min Precision lifting speed: 1.25 m/min Control pendant cable length: approx. 3.5 metres Power supply: 400 Volt, 50 Hz - 2 load chains = 500 kg - Electric trolley DEMAG, type 13/3 PF8 with 1 travel speed approx. 8 m/min, type 13/3PF 8 - For double-T beams with approx. 100 to 200 mm flange width Weight: 63 kg Rsdpfexf Uqfsx Alaecf Good condition

Condition: excellent (used), functionality: fully functional, DEMAG P2000 / P1600 25t Main hoist motor 36/24 K6P 36/20 K6P, fine travel FG 35, wire rope guide, rope drum, drum shell, hoisting gearbox Rsdpev Uvvfjfx Alaecf Significantly below manufacturer's list price Top condition Also suitable for P1000 / P1200 P600 P400 P200 Info: We have over 20,000 DEMAG spare parts in stock! Over 20,000 DEMAG spare parts in warehouse! Be sure to check my other offers from stock!

Year of construction: 2019, operating hours: 17,716 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Machine weight 26210 kg Measurements height 2410 mm This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information. Rjdpfx Aox D Nx Iolaecf Application Types Injection Moulding

Condition: excellent (used), functionality: fully functional, 2 DEMAG trolleys PLV84 NF Rjdpsv Uvp Esfx Alaecf Very good condition, complete with DEMAG DST control pendant For example, for parallel operation on a crane girder (steel trade, long parts) Lifting capacity per hoist: 1.6 tons Reeving: 4/1 Considerably below manufacturer's new price Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse Also check out my other offers

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: FI126/4 / FI128/5, 1 Demag KBK II Wall-Mounted Slewing Crane, 250 kg rated load Redpsyl Syfjfx Alascf Crane available 2x!!! Jib length 4 m, rated load 250 kg Includes Demag PK chain hoist, rated load 250 kg (older model) Weight incl. wall bracket approx. 200 kg Complete with chain hoist, cable trolley, trolley and small parts Slewing range 270° Item location: 75053 Gondelsheim System is fully dismantled and immediately available Shipping via freight forwarder or collection Shipping costs on request according to postal code

Condition: excellent (used), Year of construction: 2001, operating hours: 70,180 h, clamping force: 800 kN, screw diameter: 40 mm, injection pressure: 1,830 bar, injection weight: 205 g, Demag Ergotech Viva 800-400 (144) Description without hopper Rjdpfxovvtx To Alascf General information Product Code: 144 Availability: In Stock Year of production: 2001 Brand: Demag Technical data Shot Weight: 205 g Clamping Force: 800 kN Screw dia: 40 mm Injection pressure: 1830 bar Tie bar distance: 400 x 400 mm Platen size: 590 x 580 mm Mould height min.: 250 mm Type of controls: NC4 Language: German Power: 26,1 kW Workinghours: 70180 h Weight: 3600 kg Dimensions: 4,35 x 1,7 m Hopper: No Core pull: Yes

Condition: good (used), 25 HP, 10 bar, 2570 l/min Rjdpfxoxliv Ao Alajcf

Condition: ready for operation (used), Arm lifting capacity 125 kg, length 310 cm Rcjdpfsynitujx Alaef Chain hoist with remote control, lifting capacity 125 kg, year 2006 Suction cup, lifting capacity 250 kg, year 2009 Foot length 300 cm

Year of construction: 2005, condition: good (used), Demag 1100/470-430 tons pump (2005) Rsdpozw D D Eefx Alaocf

Condition: used, Year of construction: 2007, operating hours: 17,000 h, Equipment: all wheel drive, TEREX DEMAG AC 35 L TELESCOPIC LIFT Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2007 ? HOURS: 17 000 mth EQUIPMENT: ? ABS ? POWER STEERING ? CAB ? ALL WHEELS CONTROL ? LEVEL COMPENSATION 360 DEGREES FULL ROTATION MAXIMUM CAPACITY: 3,5 t SUSPENSION: HYDRAULIC CONTROL: JOYSTIC Rcodjzm Ekrjpfx Alasf TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Ref nr: 51317

Year of construction: 2007, condition: excellent (used), machine/vehicle number: WD700/10, Technical data: 1 Vetter / Demag pillar jib crane NL 500KG with Demag chain hoist Type AS5-4.0 Payload at full reach 500 KG / 0.5 tonne payload Height: approx. 3.75m UK boom: approx. 3.42m Reach: approx. 3.5m Hook height: approx. 2.85m Total weight approx. 800Kg including dowel plate 1050mm with Demag chain hoist 500Kg (older) Swivel range 270°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment Rsdpsv Hv Edsfx Alajcf

Year of construction: 1991, condition: good (used), machine/vehicle number: RS100/9 + RS101-6, Technical data: 1 Zasche / Demag GSX250-3/3.25 pillar jib crane NL 250 KG Payload at full reach 250 KG / 0.25 tonne payload Height: approx. 3.45m, UK boom: approx. 3.25m Reach: approx. 3m, hook height: approx. 2.85m Total weight approx. 500 kg including dowel plate 75x75cm with Demag chain hoist 250KG payload Connection to 400V 16A, swivel range 270° Test book is available Crane is dismantled and immediately available Rjdpfx Alevzkzpjascf Item location is 75053 Gondelsheim Only the crane system shown in the pictures is for sale Used condition, see pictures Shipping by freight forwarder or collection by appointment

Year of construction: 2017, condition: excellent (used), machine/vehicle number: WD750/9, Technical data: 1 Vetter / Demag pillar jib crane NL 250KG with Demag chain hoist Type AS2.5-3 Payload at full reach 250 KG / 0.25 tonne payload Height: approx. 3.95m UK boom: approx. 3.7m Reach: approx. 3.2m Hook height: approx. 3.3m Total weight approx. 800Kg including dowel plate 630mm with Demag DC chain hoist 250Kg Swivel range 270°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment Redpfjvv Npzjx Alaocf

Condition: used, Year of construction: 1981, air compressor Mannesmann Demag    • Working pressure: 12 bar    • Road lighting Rodpfjxy Ailox Alaecf Condition: Used Year of manufacture: 1981

Condition: excellent (used), For sale, a used bench-type demagnetizer designed to remove magnetization from steel components, tools, machine parts, and machined parts. Rcodpfx Ajzkwfielajf The device features a robust, industrial-grade construction with a large work surface. Demagnetization is performed by evenly moving the component across the work surface, as instructed on the front panel. The visual condition matches the photos – normal signs of wear and tear are visible, consistent with its use. The exact unit shown in the photographs is the one being sold. Technical data: Type: Demagnetizer Model: 35136-25 B1 Device number: 10103874 Type: Bench-type (plate) demagnetizer Application: Demagnetization of tools, machine parts, steel parts, and ferromagnetic components Work surface dimensions: approximately 30 × 20 cm Applications: Mechanical workshops Tool rooms Grinding shops Production facilities Machine service centers Quality control