Used Depth Gauge Depth Gauge for sale (8,360)

Condition: like new (used), Year of construction: 2007, machine/vehicle number: 82885, functionality: fully functional, HACO ERM 30135 (82885) Completely rebuilt, including a new control system. Technical condition: As new. Dsdpfozrdhmox Agmsck Bending length: 3100 mm Tonnage: 135 tons Type of press brake: Synchronized Back gauge: Y1 + Y2 + X, CNC-controlled, R-axis manual Back gauge length: 800 mm Crowning: Yes (manual) Throat depth: 400 mm Overhang: 250 mm Stroke: 200 mm Control system: ATS 595 Motor power: 15.0 kW, 400V Tooling: Yes, multiple sets of bending tools Tooling standard: European standard Year of manufacture: 2007 Overall length: 3500 mm Overall depth: 1700 mm Overall height: 2500 mm

Condition: new, Year of construction: 2026, functionality: fully functional, controller manufacturer: Cybelec, controller model: CybTouch 15, bending force (max.): 125 t, control type: CNC control, IT2 2026 Design CNC Controller CYBELEC CybTouch 15 Force 125 T Bending lenght 3000 mm Distance between columns 2600 mm Depth throat 320 mm Upper Ram stroke 150 mm Torsion Shaft with double Articulation Mechanical depth adjustment in each hydraulic Cylinder, Setting by brushless Servototor and transmission between left and right side Closing Ram speed 9 mm/s Upgoing Return-speed 40 mm/s Total Power requirement 10 kW Machine weight 6900 kg 3 +1 Axes (Y,X,R + compensation crowning) CNC controller CybTouch 15 with 15" Touchscreen with vivid colors and high contrast 200 Programs, 50 Dies, 24 Sequences per program, 10 Materials Automatic calculation of hydraulic cylinder's stopper position Easy single bends with the EasyBend page Correction menu Many languages available Upper Ram guidance by grey cast iron slydways Hydraulic equipment with counter balance compensation- pressure in lower chamber Centered lower die system 60 mm AMADA-tool Standard and 13 mm WILA Groove Upper Ram featured with 15 tool holders for punches with AMADA Standard dimensions and Fall down security Back gauge with linear guide and Ballscrews Back gauge travel 600 mm (Option 800 mm) 2 back gauge fingers on linear guides Automatic height adjustment (R axes) Automatic crowning table Safety Equipment : Foot switch with Emergency Stop Position Closing speed < 10 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Dcedpfxjxhc Spo Agmsk Safety control unit cat IV Standard configuration and equipment : Electric control cabinet on right side CNC control interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 150 mm 1 Line of 4 sides Dies, widths: 16 mm / 85°, 22 mm / 85°, 35 mm / 85°, 50 mm / 85° CE Certificate Operation manual in English, German or French language Warranty 2 Years EXW Douarnenez/ FRANCE special price 55,120 € + VAT loaded on Truck Delivery and Services need to be quoted seperatly

Condition: new, functionality: fully functional, control type: manual, working width: 1,020 mm, folding beam adjustment: 48 mm, bending angle (max.): 135 °, overall weight: 320 kg, total length: 1,350 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Finger bending machine with a segmented upper clamp Includes manual back gauge PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2.5 mm Max. working length ----- 1020 mm Max. opening width ----- 48 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Max. bending angle ----- 0 - 135 degrees Weight ----- 320 KG Dsdpfx Aoga T Ddegmeck Width ----- 1350 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: good (used), Press brake Manufacturer: EHT Year of manufacture: 1995 Machine number: 210763 Type: EHPS 20-35 Press force: 200 t Control system: DNC 806 PS Bending length: 3,550 mm Distance between uprights: 3,050 mm Throat depth: 350 mm Stroke: 330 mm Back gauge: 5 to 1,000 mm Adjustability of the H-axis: 160 mm Condition: good Accessories: Lower tool (reversing die – installed) Dsdpoy S U Efofx Agmock Main motor power: 18.5 kW Total power consumption: 25 kW Dimensions: 4,000 x 2,000 x 3,200 mm Weight: 17.7 t

Condition: excellent (used), Year of construction: 2006, Ref:11129 . 2006 Perfecta Seypa 92-TVC Guillotine Comprising; Central air table with blower Steel side air tables to left & right Electronically controlled 2 speed back gauge Dcjdpfezmydyjx Agmjk Colour display with soft key pad 8000 cut positions with 400 programmes Minimum programme step 1 mm Illuminated cutting area Infra-red light beam guard with FFM Knife change device 2 HSS knives Including tools & manuals. Specification: Cutting width, Max: 92 cm Feed table depth, Max: 92 cm Clamp opening, Max: 13.5 cm Number of cuts : 44/min. (cont. operation).

Condition: new, Year of construction: 2025, High performance CNC press brake PETERZEN model MORICO 70065 6 axis + 2 + 1 Rigid S355 steel frame Workbench structure and Ram manufactured from laminated S355 steel Symetric renforced Throats Heavy grey cast iron slydways with automatic lubrication system CNC Controller CYBELEC VisiPac 8 axis + 1 Bosch Rexroth servo valves Dcjdpfjwd I Svsx Agmsk Inovance servo drive systems DIEMA high resolution glass scales for high bending precision Bending force 700T Bending lenght 6500 mm Distance between columns 5100 mm Depth throat 420 mm Ram stroke 400 mm Closing Ram approach speed limited to 30 mm/s for human operation Closing Ram working speed 7 mm/s Return-speed 40 mm/s Main hydraulic motor 45 kW Machine weight 62,000 kg 8 Axes + 1 CNC controller Cybelec VisiPac Touchscreen monitor with vivid colors and high contrast 3D graphical profile drawing (Touch Profile) and precise 2D program creation The opening value can be setted individually in each sequence Machine can be inferfaced with different CAM software Easy single bends with the EasyBend page Correction menu Many languages available Centered lower die system 60 mm AMADA / WILA- tool or COLLY Standard Ram featured with intermittant tool holder for punches with AMADA or COLLY Standard dimensions and Fall down security All toolings adopt 42CrMo4 steel, induction hardened and cnc grinded 4 Axis Back gauge adopts linear guides and Ballscrews Back gauge travel X axis 1000 mm 2 automatic widened back gauge fingers on linear guide rails with helical rack and pinions (Axis Z1 and Z2) Automatic height adjustment (Axis R) 2 CNC Bending Followers 400 kg up to 60° angle Motorised displacement of bending followers and parking area on the right of the bending table Strong automatic mechanical crowning table. The compensation value is calculated and set by the CNC system. Safety Equipment : 3-position Foot switch with Emergency Stop Position Closing approaching speed limited to 30 mm/s for human operation Laser safety protection and permanent speed monitoring Closing bending (working) speed 7 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit category IV Standard configuration and equipment : Electric control cabinet on left side CNC user interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 200 mm 1 Line of centred lower Dies (to be defined) Place of manufacture : Douarnenez (Britanny) in Northwest FRANCE Customisation available CE Certification in respect of CE2006/42 directive and EN12622+A1 European Standard Operation manual in English, German and French language Delivery and Services available worldwide Customized Quotation GROW YOUR BUSINESS WITH PETERZEN MACHINE TOOLS

Condition: excellent (used), Year of construction: 2003, pressure 60.0 t chamfer lenght 2600 mm distance between columns 2100 mm column arm 200 mm stroke of upper beam 100 mm dayligth 280 mm table height 840 mm working feed 10.0 mm/sec return speed 70.0 mm/sec back stop - adjustable max. 650 mm Control ATS 560 oil volume ca. 150 l voltage 380 V total power requirement 7.5 kW weight of the machine ca. 4700 kg range L-W-H 3800 x 1400 x 2200 mm Equipment: - electro-hydraulic NC press brake - easy to operate - HACO NC control model ATS 560 * 7-digit LED display * Memory capacity for 200 programs with a maximum of 400 sets * Working with pressure and immersion depth * Inching function for electric backgauge * Set / actual value input for back gauge * Swiveling control panel, left front - NC controlled axes : Y1 Y2 X axis - NC electro-hydraulic synchronization and immersion depth positioning - NC electro-motorized backgauge * with ball screws * speed 240 mm/sec. * including 2x manually adjustable stop fingers in width and height * backgauge programmable to an accuracy of 0.1 mm - Manual table crowning, with handwheel and analog display - "SYSTEM A" top tool holder, incl. top wedge crowning - "SYSTEM A" bottom tool holder - Various insert/bending tools - 1x freely movable 2-hand/foot control * only moves at working speed - Operating instructions also included in the scope of delivery (built-in): - 1x brand new / split set of upper tools * UKB 11,200 mm - 3x 835 mm Dcedpfx Aozbc Dmsgmsk * Angle 85° - Radius R 0.8 mm - Height 66.5 mm * Load capacity 1000 kN/m max - 1x brand new / split set of bottom tools * UKB 21.207 - 3x 835 mm * V openings = 16/22/35/50 mm * Angle 85° * Load capacity 800 kN/m max.

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min Dcodpfxszp Ex Uo Agmok - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: used, Year of construction: 2015, For sale: professional hydraulic CNC bending press AMADA HFE M2 170-3. The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Djdpjzrw Akjfx Agmjck Key information: Manufacturer: AMADA Model: HFE M2 170-3 Date of manufacture: 2015.06 Bending force: 170 T (1700 kN) Working length: 3000 mm Maximum bending length: 3340 mm Motor hours: 16,615.07 Technical parameters: Distance between columns: 2700 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Power consumption: 18 kW Machine dimensions: Length: 4470 mm Width: 2625 mm Height: 3140 mm Weight: 12400 kg Equipment and features: Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2015, For sale: a professional electric CNC bending press, AMADA HFE M2 100-3. Operates very quietly due to its electric drive. The machine is in full working order and has been regularly serviced by Amada. It can be inspected and tested. The machine is sold without tooling. We can offer new tooling based on your requirements. Key information: Manufacturer: AMADA Model: HFE M2 100-3 Date of manufacture: 2015.06 Bending force: 100 T (1000 kN) Working length: 3000 mm Maximum bending length: 3340 mm Technical parameters: Distance between columns: 2705 mm Stroke: 200 mm Depth (to side frame): 420 mm Approach speed: 100 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Dcsdozrwc Djpfx Agmok Power consumption: 10.5 kW Machine dimensions: Length: 4385 mm Width: 2430 mm Height: 2680 mm Weight: 6700 kg Equipment and accessories: Controller: Amada touch screen Upper tool clamping: Amada manual clamping Back gauge: X, R automatic. Z1, Z2, Z3, Z4 mechanical. Laser protection: CE – AKAS automatic laser If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, oil tank capacity: 90 l, total length: 1,600 mm, total width: 1,000 mm, total height: 1,600 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, OFFER OF THE WEEK! MTP Hydraulic CNC Press Brake 1320 mm / 40 t Touchscreen Control + Servo System Metal Technics Polska is a manufacturer and importer of professional CNC machines, laser systems and metalworking equipment. For 15 years, we have supplied reliable technologies to hundreds of companies across Europe. The MTP 1320/40 hydraulic press brake is designed for accurate and efficient sheet-metal bending. With a pressing force of 40 tonnes and a working length of 1320 mm, it is suitable for workshops and manufacturers in the electromechanical, automotive, agricultural, shipbuilding, aerospace and light-industry sectors. MTP-3212 TOUCHSCREEN CONTROL The modern MTP-3212 controller combines simple operation with advanced programming functions: - Touchscreen interface - Automatic bending-angle calculation - Storage for thousands of programs - Manual programming without visualization - Tool library and editing - SD card memory - Crowning correction - Angle correction - Axis correction AMADA-PROMECAM TOOL CLAMPING The machine is equipped with a fast and secure AMADA-Promecam-style manual tool-clamping system. It enables quick punch replacement without additional tools, reducing setup time between jobs. SAFETY EQUIPMENT - Side safety guards - Safety light curtains - Secured rear safety zone - Automatic machine stop when intrusion is detected TECHNICAL DATA - Nominal force: 400 kN / 40 t - Working table length: 1320 mm - Distance between columns: 900 mm - Throat depth: 180 mm - Ram stroke: 100 mm - Maximum daylight: 290 mm - Back-gauge range: 500 mm - Approach speed: 80 mm/s - Working speed: 9 mm/s Dcedpfjyr N E Eex Agmok - Return speed: 80 mm/s - Main motor power: 4 kW - Dimensions: 1500 × 1300 × 1600 mm - Controller: MTP-3212 touchscreen - Tool clamping: AMADA-Promecam style - Crowning correction: Yes - Angle correction: Yes - Axis correction: Yes The MTP 1320/40 combines compact dimensions, intuitive touchscreen control and reliable hydraulic technology. It is an efficient solution for precise bending and repeat production work. Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 80 t, stroke length: 120 mm, table length: 2,500 mm, throat depth: 250 mm, distance table to ram: 385 mm, clearance between the columns: 2,000 mm, oil tank capacity: 160 l, total length: 2,600 mm, total width: 1,450 mm, total height: 2,300 mm, overall weight: 4,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic CNC Servo Press Brake MTP 80X2500 with MTP-3212 Controller – In Stock The MTP 80X2500 is a hydraulic CNC servo press brake designed for accurate and efficient sheet-metal bending. The machine delivers a pressing force of 80 tonnes and offers a maximum working length of 2,500 mm. It is suitable for processing sheet metal up to 4 mm thick. The machine is equipped with two controlled axes: * X-axis – servo-controlled back-gauge positioning * Y-axis – servo-controlled ram movement The MTP-3212 CNC controller features a large colour touchscreen and a clear, intuitive operating menu. Its software automatically calculates the required bending angle, helping simplify machine setup and improve production efficiency. The controller can store data for up to 40 different punch types. The machine is fitted with an AMADA-style quick-clamping system, enabling fast and convenient tool changes. Two front material supports are included. High-quality components ensure reliable operation and a long service life. The hydraulic system uses a renowned German Rexroth valve, while the electrical system incorporates Schneider components. Safety components are supplied by Omron and Schneider. Steel hydraulic connections help minimize the risk of leakage. For comfortable operation, the press brake is equipped with a mobile control unit and a controller mounted on an adjustable arm. Integrated LED lighting provides excellent visibility throughout the working area. The machine includes extensive safety equipment, such as side guards, a rear safety gate, easily accessible emergency-stop switches and a safety light barrier. The light barrier helps prevent accidental access to the area between the punch and die during operation. A Polish-language operating manual and a CE declaration of conformity are included. Technical support is also available to assist with tooling selection, material selection, bending sequences and the configuration of suitable operating parameters. Technical specifications: * Pressing force: 80 t * Maximum working length: 2,500 mm Dcodpszrl Nlsfx Agmok * Maximum sheet thickness: 4 mm * Controlled axes: X and Y * Distance between columns: 2,000 mm * Throat depth: 250 mm * Ram stroke: 120 mm * Maximum opening height: 385 mm * Back-gauge travel: 600 mm * Motor power: 5.5 kW * Overall weight: 4,800 kg * Dimensions (L × W × H): 2,600 × 1,450 × 2,300 mm * Front material supports: 2 * Punch clamping: AMADA-style quick-clamping system * CNC controller: MTP-3212 * Safety light barrier: Yes * CE marking: Yes * Documentation: Polish-language operating manual The machine is currently in stock and available for prompt dispatch. Delivery can be arranged throughout Europe and to destinations beyond Europe. Transport costs are calculated individually and depend on the delivery destination. Please contact us with your delivery address or postal code to receive a transport quotation.

Condition: used, Year of construction: 2010, gebraucht 2010 080065 prompt, Zwischenverkauf v Deutschland 29800 € 1 2040 mm 3 mm 2 mm 4.5 mm Motorisch 1.5 kW 1.1 kW 3060 mm 1650 mm 1500 mm 2730 kg 750 mm 140 mm 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5" color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages ??such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R 2 mm Mechanical drive via gear brake motor Upper beam drive via double eccentric Foot pedal Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. Dcedpfjwiri Ajx Agmek • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) Dcodpehmmfkefx Agmok - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: ready for operation (used), Year of construction: 2019, controller manufacturer: CYBELEC, controller model: CybTouch 6, overall weight: 11,600 kg, total width: 2,080 mm, total height: 2,060 mm, cutting length (max.): 3,100 mm, product length (max.): 4,000 mm, CNC shearing machine manufactured in 2019. This GILARDI ATHENA 3.10 features a working length of 3,100 mm and a cutting capacity of 10 mm at 42 kg/mm². It includes a CYBELEC CybTouch 6 CNC control, automatic blade gap adjustment, and a robust steel frame. If you are looking to get high-quality shearing capabilities, consider the GILARDI ATHENA 3.10 machine we have for sale. Contact us for further details. • Cutting capacity: • 10 mm at 42 kg/mm² • 6 mm at 70 kg/mm² • Adjustable cutting angle: 0.5°–2.5° • Cutting rate: 6–14 strokes/min Dcsdpfxozn Nvze Agmjk • Back gauge travel: 1,000 mm • Number of hold-downs: 14 • Main motor power: 11 kW • Throat depth: 175 mm • Control: CYBELEC CybTouch 6 CNC with color display • Features: • Automatic blade gap adjustment • Automatic blade stroke adjustment • Adjustable blade cutting angle • Hardened 4-edge cutting blades (54–60 HRC), divided into 835 mm sections • Front sheet supports • Operator hand protection guards • Sheet hold-down system • Rigid welded ST44A1 steel frame

Condition: good (used), functionality: fully functional, Cutting length: 2020 mm Max. sheet thickness at 400 N/mm²: 5 mm Max. sheet thickness at 750 N/mm²: 3 mm Cutting angle approx.: 1.5° Strokes per minute: 40 strokes/min Back gauge approx.: 750 mm Stand throat depth: 200 mm Dodozpg U Dopfx Agmjck

Condition: used, mileage: 275,932 km, power: 120 kW (163.15 HP), first registration: 04/2010, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, exterior temperature display, battery 100 Ah, additional battery (reinforced), battery disconnect switch 1-pole, turn signals in the front, roof console with reading light for driver/passenger side, door entry lights, additional main key, folding cover for storage compartment, programmable special module, spare wheel Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver seat comfort, reinforced rear stabilizer bar, reinforced front stabilizer bar, fuel gauge for auxiliary heater, separation relay for additional battery, rear wall paneling, thermal insulation for the driver's cab, heat-reflective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, roof lining in the cab, glove compartment lockable, body/superstructure: standard platform body, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 L - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, service interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle/rear axle incl. stretcher and transfer chair from Stollenwerk, 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle box body * Superstructure by Fahrtec Systeme * Adjustable floating table * Stretcher by Stollenwerk * Transfer chair by Stollenwerk * Central locking for the patient compartment * Air conditioning KONVEKTA * 1 attendant seat * Refrigerator * Warming cabinet * Sink * Medical cabinets Dedpfxjzn El Se Agmeck * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Roof hatch * External storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning, front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Rear axle with dual tires * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * GVWR: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti, DOT 2023, with approximately 8.0mm tread depth in the front and approximately 6.5mm in the rear. Engine, automatic transmission, and rear axle are dry. The engine runs smoothly and the automatic transmission shifts cleanly. Starter battery is new. +++ Errors, changes, and prior sale are reserved.

Condition: used, mileage: 235,213 km, power: 120 kW (163.15 HP), first registration: 07/2016, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Dsdozn Emiepfx Agmock 1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, 100 Ah battery, additional (reinforced) battery, 1-pole battery disconnect switch, turn signals in the front on the side, roof control unit with reading spot for driver/passenger side, door entry lights, additional main key, folding cover for storage compartment, configurable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separating relay with additional battery, rear wall trim, thermal insulation for the driver's cab, heat-protective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver's side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, brake assist, braking system with ABS+ASR, roof lining in the cab, lockable glove compartment, body/superstructure: standard platform, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to Euro 5 emission standard, safety belt system with warning system (driver's side), seat cover/upholstery: fabric Lima, service interval indicator Assyst, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle including stretcher and carrying chair, Stollenwerk, 1st hand * Rear axle with air suspension * Ambulance and rescue vehicle with box body * Superstructure by Fahrtec Systeme * Adjustable floating table * Central locking for the patient compartment * KONVEKTA air conditioning * 1 attendant seat * Refrigerator compartment * Warming cabinet * Sink * Medicine cabinets * Oxygen and suction prepared * 12 + 230 volt sockets * Skylight * Exterior storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting on the left, right and rear * 2x interior lighting bright white and blue * Cab with 2 seats * 2x air conditioning in the front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Twin-tired rear axle * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3.650 x W=1.900 x H=1.980 mm * Wheelbase: 3.650 mm * GVWR: 5,000 kg * Unladen weight: 4,415 kg Good all-season tires from Conti with DOT 2024 with approximately 6.0 mm tread depth all around Engine, automatic transmission and rear axle are dry The engine runs smoothly and the automatic transmission shifts cleanly Starter battery is new +++ Errors, changes and prior sale are reserved.

Condition: ready for operation (used), Year of construction: 1987, A Hoes drainage trencher for laying drainage pipes and trenches for subsurface drainage is available. Engine: Deutz F 8 L 413 F, Power: 157kW, Torque (1500rpm): 760Nm, Fuel tank capacity: 435l, Oil tank capacity: 125l, Max. working/travel speed: 2400m/min/4750m/min, Track length: 4900mm, Track gauge: 2120mm, Track shoe width: 550mm, Specific ground pressure: approx. 0.26kp/cm², Max. trenching chain speed: 5.69m/s, Chain tensile strength: 640kN, Chain pitch: 100mm, Max. trench width: 290mm, Max. trench depth: 1850mm. Machine dimensions X/Y/Z: approx. 9650mm/2700mm/3400mm, Weight: approx. 13500kg, Operating hours: approx. 8470h. The machine is equipped with a laser guidance system. Includes many spare parts. Documentation available. An on-site inspection is possible. Dcedoznmzbjpfx Agmsk

Condition: new, Year of construction: 2026, functionality: fully functional, spindle motor power: 11,000 W, total length: 3,870 mm, total height: 2,400 mm, total width: 1,550 mm, overall weight: 7,400 kg, product height (max.): 390 mm, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, # HYDRAULIC CNC PRESS BRAKE MTP 125×3200 | 125 T | MTP-3212 | 4 AXES Y1, Y2, X + V The brand-new MTP 125×3200 Hydraulic CNC Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets up to 6 mm thick. Thanks to its advanced CNC control system, heavy-duty welded frame, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (Y1, Y2, X + V), ensuring exceptional accuracy, repeatability, and fast production setup. ## Standard Equipment • MTP-3212 CNC controller with a large full-color touchscreen • Independently servo-driven Y1 and Y2 axes • Servo-driven X-axis (back gauge) • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. Dedpfx Agezg H Ewemsck ## Premium Components The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ## Ergonomics & Safety Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual ## Technical Specifications • Maximum sheet thickness: up to 6 mm • Pressing force: 125 T • Maximum bending length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: Y1, Y2, X + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3870 × 1550 × 2400 mm • Machine weight: 7,400 kg ## Technical Support We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle motor power: 15,000 W, total length: 3,300 mm, total height: 2,700 mm, total width: 1,800 mm, overall weight: 11,400 kg, product height (max.): 480 mm, feed length X-axis: 600 mm, feed length Y-axis: 200 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, operating speed: 80 mm/s, # HYDRAULIC CNC PRESS BRAKE MTP 200×3200 | 200 T | MTP-3212 | 4 AXES Y1, Y2, X + V The brand-new MTP 200×3200 Hydraulic CNC Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets up to 8 mm thick. Thanks to its advanced CNC control system, heavy-duty welded frame, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (Y1, Y2, X + V), ensuring exceptional accuracy, repeatability, and fast production setup. ## Standard Equipment • MTP-3212 CNC controller with a large full-color touchscreen • Independently servo-driven Y1 and Y2 axes • Servo-driven X-axis (back gauge) • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. ## Premium Components The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention Dcsdpszg Hzxefx Agmjk ## Ergonomics & Safety Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual ## Technical Specifications • Maximum sheet thickness: up to 8 mm • Pressing force: 200 T • Maximum bending length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 200 mm • Maximum opening height: 480 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: Y1, Y2, X + V • Main motor power: 15 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3300 × 1800 × 2700 mm • Machine weight: 11,400 kg ## Technical Support We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle motor power: 22,000 W, total length: 4,300 mm, total height: 2,960 mm, total width: 2,300 mm, overall weight: 10,600 kg, product height (max.): 370 mm, feed length X-axis: 600 mm, feed length Y-axis: 270 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, operating speed: 80 mm/s, # HYDRAULIC CNC SERVO PRESS BRAKE MTP 220×3200 | 220 T | MTP-3212 | 4 AXES X,Y1,Y2,R+V The brand-new MTP 220×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its advanced CNC control system, heavy-duty welded construction, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. Dedpezg Evhefx Agmeck The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup. ## Standard Equipment • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X-axis (back gauge) • Servo-driven Y-axis (ram control) • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. ## Premium Components The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ## Ergonomics & Safety Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual ## Technical Specifications • Pressing force: 220 T • Maximum bending length: 3100 mm • Distance between columns: 2550 mm • Throat depth: 450 mm • Ram stroke: 270 mm • Maximum opening height: 370 mm • Table height: 920 mm • Controlled axes: X, Y, R + V • Main motor power: 22 kW • Hydraulic oil tank capacity: 200 L • Machine dimensions (L × W × H): 4300 × 2300 × 2960 mm • Machine weight: 10,600 kg ## Technical Support We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate operation.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle motor power: 11,000 W, total length: 3,870 mm, total height: 2,400 mm, total width: 1,550 mm, product height (max.): 455 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 200 m/min, workpiece weight (max.): 11,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, operating speed: 80 mm/s, # HYDRAULIC CNC SERVO PRESS BRAKE MTP 200×3200 | 200 T | MTP-3212 | 4 AXES X,Y1,Y2,R+V The brand-new MTP 200×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its heavy-duty welded frame, advanced CNC control system, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup for both single-part and high-volume manufacturing. ## Standard Equipment • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X-axis (back gauge) • Servo-driven Y-axis (ram control) • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. ## Premium Components The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system (Germany) • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ## Ergonomics & Safety Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual ## Technical Specifications Dcedpfx Aezg Ebwegmek • Pressing force: 200 T • Maximum bending length: 3200 mm • Distance between columns: 2530 mm • Throat depth: 320 mm • Ram stroke: 200 mm • Maximum opening height: 455 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y, R + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3870 × 1550 × 2400 mm • Machine weight: 11,000 kg ## Technical Support We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle motor power: 11,000 W, total length: 3,870 mm, total height: 2,400 mm, total width: 1,550 mm, overall weight: 7,400 kg, product height (max.): 390 mm, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, operating speed: 80 mm/s, # HYDRAULIC CNC SERVO PRESS BRAKE MTP 125×3200 | 125 T | MTP-3212 | 4 AXES X,Y1,Y2,R+V The brand-new MTP 125×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its advanced CNC control system and robust welded construction, it is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y, R + V), ensuring exceptional accuracy, repeatability, and fast production setup. ## Standard Equipment • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven X and Y axes • Automatic R-axis adjustment • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • LED working area illumination • Mobile control panel The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. ## Premium Components The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron safety components The machine is equipped with safety light curtains, side guards, a rear safety fence, emergency stop switches, a CE Declaration of Conformity, and an operating manual. ## Technical Specifications • Pressing force: 125 T • Maximum bending length: 3200 mm • Maximum sheet thickness: up to 6 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y, R + V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions: 3870 × 1550 × 2400 mm • Machine weight: 7400 kg ## Technical Support Dcsdpfezg Dk Dox Agmek We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,300 mm, total height: 2,500 mm, total width: 1,650 mm, overall weight: 9,600 kg, product height (max.): 455 mm, feed force X-axis: 600 N, feed length X-axis: 180 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, # Hydraulic CNC Servo Press Brake MTP 160x3200 The Hydraulic CNC Servo Press Brake MTP 160x3200 is a modern machine designed for precise bending of mild steel, stainless steel, and aluminum sheets. With a pressing force of 160 tons and a bending length of 3200 mm, it is suitable for both serial production and custom fabrication. The machine is equipped with the MTP-3212 CNC controller and 4 CNC-controlled axes (Y1, Y2, X, R), ensuring high accuracy, repeatability, and fast positioning. The intuitive controller with a large color touchscreen allows easy programming, automatic bending calculations, and storage of programs and tooling data. The press brake incorporates high-quality components from leading manufacturers, including a Rexroth hydraulic system, Schneider Electric components, and Omron safety devices. Steel hydraulic connections improve reliability and minimize the risk of leaks. For operator convenience, the machine features a mobile control panel, two front support arms, and LED working area illumination. Safety is ensured by a light curtain, side guards, rear safety protection, and easily accessible emergency stop switches. The machine is supplied with a CE Declaration of Conformity and an English user manual. ## Technical Specifications * Pressing force: 160 T * Maximum bending length: 3200 mm * Maximum sheet thickness: up to 8 mm * Control system: MTP-3212 CNC * Number of CNC axes: 4 (Y1, Y2, X, R) * Distance between side frames: 2600 mm * Throat depth: 320 mm * Ram stroke: 180 mm * Maximum opening height: 455 mm * Back gauge travel (X-axis): 600 mm * Tool clamping system: AMADA quick clamping * Motor power: 11 kW * Power supply: 400 V / 50 Hz * Dimensions (L × W × H): 3300 × 1650 × 2500 mm * Weight: 9600 kg ## Additional Information * Professional technical support included * Assistance with tooling selection and bending parameters * CE Declaration of Conformity included * English user manual supplied Dcedpfx Aezcmrdegmok * Spare parts support during and after the warranty period * Possibility to extend the warranty beyond the standard warranty period The machine is sold on an EXW basis. Transportation can be arranged upon request and quoted separately depending on the delivery destination. Our team will be pleased to provide a competitive transport quotation to any location within Europe and worldwide. For more information about our company, machines, and services, please visit our website. Metal Technics Polska is a trusted supplier of industrial machinery, offering professional sales support, technical assistance, spare parts availability, and after-sales service for customers throughout Europe.