Used Eccentric Press 16 T for sale (82,958)

Condition: good (used), pressing force: 50 t, stroke length: 320 mm, Capacity 50 Ton Throat 225 mm Adjustable stroke 8 - 100 mm Number of strokes 320 p/min Crsdpfott A T Tjx Adrjh Ram size 300 x 280 mm Table size 500 x 800 mm Machine LxWxH: 160 x 120 x 260 cm Machine weight: 6 Ton

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m Crodey Nd Svjpfx Adrjh

Condition: good (used), Pressing force: approx. 10 tons Table size: 500 x 300 mm (W x D) Pedal size: 110 x 105 mm (W x D) Installation height: approx. 150 mm (large stroke at the top) Stroke: 5...29 mm Cjdjvnrhwspfx Adrorh Pedal adjustment: 25 mm Other • Rotating wedge coupling • Foot release • Control and protective screen as new, only used very little • Without table

Condition: excellent (used), Year of construction: 1982, LEN 25C Eccentric Press. year of manufacture 1986(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 25 tons - number of jumps in the machine: 76/155 min - number of strokes manual work: 45/60 min - slider stroke adjustment: 8-85 mm - slide stroke: 55 mm - table surface: 560 x 450 mm - slider area: 355 x 225 mm - clearance between columns: 250 mm Cedpfx Adok Nltljrerh - number of gears: 2 - engine power: 2.2 / 3 kW - dimensions of the press: 1135 x 1365 x 2145 mm - weight: 2500 kg

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Cjdpfx Ajv Uraasdrerh Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: good (used), Year of construction: 1977, 1 used eccentric press Make: Helmerding Model: EL 35 B Year of manufacture: 1977 Machine no.: 5182 Pressing force: 350 kN Adjustable stroke: 12 - 80 mm Adjustable slide: 70 mm Slide strokes per minute: 110 Cedpfx Aowxxr Aedrjrh Adjustable table: 150 mm Safety distance: 150 mm Overrun: 50 mm Weight: 2050 kg Equipped with press safety valve

Condition: excellent (used), Eccentric press Inventory no. 3919 Manufacturer: Weingarten Type: XOR 2 Press force: 75 tons * Stroke adjustment: 10 to 100 mm * Adjustable ram: 60 mm * Installation height: 360 mm Crodpszpbviofx Adroh * Overhang: 270 mm * Table area: 630 x 600 mm * Foot-operated * Machine weight: approx. 4500 kg In very good condition.

Condition: excellent (used), Eccentric press Inventory No. 3920 Manufacturer: Rijva Type 504 Press force: 40 tons * Stroke adjustment: 15 to 75 mm * Adjustable ram: 60 mm * Installation height: 310 mm * Overhang: 225 mm * Table surface: 570 x 430 mm * Adjustable table * Foot pedal operation * Central lubrication Cedszpbvpepfx Adrorh * Machine weight: approx. 2600 kg. In very good condition.

Condition: good (used), machine/vehicle number: 17365, Year of construction: 2020, operating hours: 950 h, load capacity: 1,600 kg, lifting height: 800 mm, fuel type: electric, mast type: other, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 599 kg, 5295117 Serial Number: W41152X09398 Battery Details: 24V 2PzS 180Ah BJ: 2020 Csdpfxez Hgiao Adrjrh

Condition: used, Year of construction: 2018, Nominal pressing force: 4,000 kN Ram stroke, adjustable in increments: 30 ... 160 mm Ram adjustment: 180 mm Throat depth: 515 mm Strokes per minute (idle): 45 / min Option: Infinitely variable stroke rate: 10 … 60 / min Die installation height at maximum stroke, bottom dead center, and ram fully raised: 660 mm Table clamping surface (W x D): 1,700 x 1,000 mm Table height above floor: 1,005 mm Ram clamping surface (W x D): 1,100 x 800 mm Pin bore in ram: 65 mm Main motor power: 45 kW Approximate machine height: 4,325 mm Machine weight: 33,000 kg Control system – Press safety control with redundant design and self-diagnosis, featuring plain text status and error display Csdpfxjw Rbxze Adrsrh Infinitely variable stroke rate in the range of 10 ... 60 strokes/minute via ABB frequency inverter Control variant: TFT color touchscreen including electronic cam controller with die management and die protection, with color touchscreen visualization, SIEMENS PLC S7-300, die data management, counting systems, data transmission via Profibus Fully automatic stroke adjustment / ram adjustment Rigidly welded tie rods, clear distance between tie rods: 1,345 mm Swiveling main control console Non-contact safety guard – BWS brand LUMIFLEX, mounted at the front of the machine table or die area, installed on the tie rods

Condition: used, Year of construction: 1977, pressure 160 t throat 340 mm stroke 20-120 mm no. of strokes max. 45 Hub/min table plate 1000 x 720 mm ram surface 750 x 380 mm daylight 330 mm weight of the machine ca. 8,7 t Cjdpfszwg Umex Adrjrh dimensions of the machine ca. 1270x2310x2595 m

Condition: used, pressure 150 t Codpfx Adsyuqdhererh Table dimensions 1000 x 360 mm voltage 400 V

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 143100 € 2704.59 € 160 to 6 mm 1200 mm 650 mm 200 mm 16 - 160 mm 35 - 55 1/min 740x420 mm 8 100 mm 330 mm 690 mm 15 kW 1410 mm 2220 mm 3544 mm Codpfx Aoyq Suyedrjrh 16000 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector automatic cams reset double bolster plate oil circular lubrication dynamic brake safety light guard Keyence Automation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - Semi automatic or automatic stroke adjustment - die safety control - alarms view - overload protector

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm stroke:8-100 mm table depth:710 mm table width:500 mm Codpfocxxx Hsx Adrerh ram head dimension:450x280 mm ram adjustment:63 mm no. of strokes:140 Hub/min total power requirement:7 kW weight of the machine ca.:3,5 t

Condition: used, Year of construction: 1967, pressure:80 t throat:280 mm stroke:20-120 mm table width:710 mm table depth:560 mm ram head dimension:560x355 mm ram adjustment:72 mm Csdjcxxrhepfx Adrerh no. of strokes:125 Hub/min total power requirement:9,5 kW weight of the machine ca.:4,4 t

Condition: excellent (used), machine/vehicle number: 4868, functionality: fully functional, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight with motor, without base: 245-295 kg Net weight of standard pedestal (base): 95 kg Customs classification: 8462.9930 TECHNICAL SPECIFICATIONS TYPE D-8 / D8-200: Cedpfx Ajw T S Tzsdrorh Maximum capacity: 8 tons Maximum cutting section for Rc=40 kg/mm²: 200 mm² Standard fixed stroke: 20 mm Variable stroke, standard range: 4-36 mm Variable stroke, extra-large range: 8-50 mm Maximum height between table (without plate) and ram: 220 mm Thickness of movable plate: 42 mm Standard opening in the plate, diameter: 50 mm Opening in the table, diameter: 60 mm Ram bore, diameter x depth: 38x60 mm Ram adjustment (tie rod extension): 70 mm Ram base surface (width x depth): 105x90 mm Required power, HP: 1/3 Flywheel dimensions, diameter x width: 410x85 mm Standard flywheel speed: 180 RPM TECHNICAL SPECIFICATIONS TYPE D-8: Distance from ram center to frame: 100 mm Distance between frame columns: 170 mm Table surface, width x depth: 270x190 mm TECHNICAL SPECIFICATIONS TYPE D8-200: Distance from ram center to frame: 200 mm Distance between frame columns: 160 mm Table surface, width x depth: 270x300 mm Unless otherwise stated, these technical specifications are provided without engagement and subject to possible error or omission.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 65/2/158/02, functionality: fully functional, pressing force: 65 t, stroke length: 120 mm, table length: 580 mm, throat depth: 280 mm, total width: 820 mm, punching force: 65 t, Used 65ton mechanical power press for sale Video at the bottom of this listing MODEL 65 CNR 4 SERIAL N° 65/2/158/02 NOMINAL FORCE (Max stroke) 650 [ KN] MACHINE WEIGHT 5000 [ daN] NOMINAL SPEED 73 [ C/min ] VARIABLE SPEED MIN/MAX [ C/min ] MAXIMUM CLUTCH ENGAGEMENTS 36 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 [ bar) MAXIMUM STOPPING TIME 0,154 SAFETY DISTANCE 246 [ mm ] FLYWHEEL ENERGY 3440 [ KJ] STROKE LENGTH MIN/MAX 10 / 120 [ mm ] RAM ADJUSTMENT 100 [ mm ] SHUT HEIGHT S.D.A.U. 320 [ mm ] MAXIMUM EJECTOR STROKE 40 [ mm] TABLE SIZE 68 / 580 / 820 [ mm ] RAM SIZE 340/ 470 [mm] TOOL SPIGOT DIA 45 [ mm ] THROAT DEPTH 280 [ mm ] MAX TOOL SIZE 340 / 470 [ mm ] Csdjxqn Unspfx Adrorh MAX TOP TOOL WEIGHT 136 [ daN]

Condition: used, Year of construction: 1982, pressure 150 t throat 520 mm stroke 30 - 200 mm no. of strokes 15 - 60 /min distance table/ram, max. stroke up, adjustment up 650 mm Crjdpfx Adezrprkorsh table surface area 1600 x 1000 mm hole in the table 1040 x 140 mm table height over floor 1000 mm passage to the back 1000 mm ram surface 1400 x 800 mm ram adjustment 120 mm power requirement 20,0 kW weight 27,5 t dimensions (WxDxH) 2,3 x 2,75 x 4,5 m with infinitely variable drive, pneumatic clutch/brake combination (make Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, semi-automatic ram adjustment

Condition: used, Year of construction: 1977, pressure 080 t throat 280 mm stroke 8 - 112 mm no. of strokes 30 - 120 /min distance table/ram, max. stroke up, adjustment up 500 mm table surface area 840 x 580 mm Codpfx Adszrppporerh hole in the table 150 mm table height over floor 910 mm passage to the back 640 mm ram surface 560 x 300 mm ram adjustment 80 mm power requirement 7,5 kW weight 8,0 t dimensions (WxDxH) 1,6 x 2,3 x 3,3 m with infinitely variable drive, pneumatic clutch, hydraulic overload protection in ram, motoric ram adjustment, inclineable, two-hand operation

Condition: used, mileage: 1,001 km, first registration: 01/2003, color: green, driver cabin: other, gearing type: other, Year of construction: 2003, Vehicle location: Bovenden, container locking mechanism, rear supports. Body: 16-ton Meiller AK 16.T demountable system. Removed from a Daimler-Benz Actros 2646 6x4. Wheelbase: 3300mm. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Csdsi Rlzkepfx Adrerh

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 173600 € 3281.04 € 200 to 7 mm 1350 mm 800 mm 250 mm 18 - 180 mm 35 - 50 1/min 900x570 mm 8 110 mm 410 mm 820 mm 22 kW 1500 mm 2633 mm 3950 mm 20000 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector automatic cams reset double bolster plate Cedpoyq Squsfx Adrjrh oil circular lubrication dynamic brake safety light guard Keyence Automation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - Semi automatic or automatic stroke adjustment - die safety control - alarms view - overload protector PRICE FCA ITALY

Condition: new, neu ca. 14 - 16 Wochen ab Auf Italien 199300 € 3766.77 € 250 to 8 mm 1400 mm 800 mm 250 mm 23 - 220 mm 25 - 50 1/min 950x620 mm 8 120 mm 410 mm 820 mm 33 kW 1600 mm 2900 mm 4250 mm 25000 kg touch screen control Crjdpfx Adoyq Spderoh semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector automatic cams reset double bolster plate oil circular lubrication dynamic brake safety light guard Keyence Automation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - semi automatic or automatic stroke adjustment - die safety controls - alarms view -overload protector PRICE FCA ITALY

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Crjdpfxjzkmi Do Adrjh Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: good (used), machine/vehicle number: 17377, Year of construction: 2020, operating hours: 965 h, load capacity: 1,600 kg, lifting height: 220 mm, fuel type: electric, mast type: other, construction height: 1,300 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 492 kg, 5295167 Credsz Hglnspfx Adroh Serial Number: W41152X08471 Battery Details: 24V 2PzS 250Ah BJ: 2020

Condition: used, Year of construction: 2004, pressure 25 t throat 375 mm stroke 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 3,5 kW weight of the machine ca. 2,8 t Crsdpjykb D Defx Adrsh