Used Edge Trimming Device, Edge Trimming Machine for sale (71,471)

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Itsdeu Racxjpfx Anwjh Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm -Motor mounted on guides -Quantity: 1 motor available with left-hand thread Itjdeb A Nmdspfx Anwoh -Price: per piece -Weight: 20 kg/piece

Condition: good (used), 11kW motor Itsdpfx Ansr A Aqlswoh Fully operational

Condition: used, Hebrock K34 Itjdpfx Answtfvkswjh Edge thickness up to 8 mm PLC screen control with 15" touchscreen Pre-milling unit for application before the gluing section (3mm) Gluing station with interchangeable container and glue dispensing device Edge height max. 60 mm Trimming unit Milling unit for flush trimming/radius/chamfer milling Corner rounding unit for radii/chamfers Multi-radius pull blade (R1/R2) Nesting Surface pull blade Release agent spraying system Year of manufacture 2023, 52 operating hours Machine is in NEW condition and in TOP condition From a carpentry business closure/retirement Available from carpentry

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 125-3b High-pressure vise Jaw width: 125 mm Jaw height: 40 mm Jaw opening: 203 mm Clamping force: 2 / 3 / 4 t Guideway height: 62 mm Iodpfsy Ra Ddex Anwjth - Clamping force adjustable in 3 stages - High-pressure vise with mechanical force amplifier - Clamping range adjustable in 4 stages - 1 compensating jaw, type 180, jaw width 125 mm - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 28 kg

Condition: new, Edge and contour milling machine Make: Assfalg Itodpfx Aebhfzbjnweh Model: KKE 1 condition: new machine Speed: 8.000 - 24.000 rpm (infinitely variable) max. bevel width: 3 mm serially equipped with: - Guide rail - wrenches, open-end wrenches - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating instructions

Condition: new, Deburring machine brand: Aboagye Model: AF 165 Condition: new machine Speed: 2,800 RPM maximum cutting width: 1 mm equipped as standard with: -Special flap disc K80-ST Ijdpfodurxnex Anwjth -Suction nozzle -Manual

Condition: ready for operation (used), Year of construction: 2008, Brandt Optimat KDF 420 Edge Banding Machine Powercontrol PC 20 control system Edging thickness: 0.4–8 mm Edging height: 8–60 mm Joint trimming with DIA cutter End trimming Flush and radius trimming Radius scraper blade Flat scraper blade Buffing unit Machine length: 4360 mm Iedpfxox Dzw Ne Anweth Operating manual and tools included Year of manufacture: 2008 Price: 15,000.-

Condition: ready for operation (used), Year of construction: 1993, Langzauner LZK 4 edge sanding machine with oscillating veneer edge sanding unit Sanding unit infinitely adjustable from 0- 45° miter fence Oscillation Height-adjustable sanding beam to utilize the entire belt width Table size 1250 x 350 mm Motor power 3kW Belt length 3000 mm Belt width 200 mm Iodpouacg Ajfx Anwjth Belt speed 22m/sec Weight approx. 450 kg Space requirement 1900 x 900 mm year of construction 1993 Condition checked for function Price 5500.-

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 4/3509, power: 2.2 kW (2.99 HP), Model: LZK 3/4. Machine No.: 4/3509. Belt dimensions: 150 x 2600 mm. Feed unit: Masterwood type MEC 8V. Main motor: 2.2 kW. Oscillation motor: 0.18 kW. Iedpjy Nz H Dsfx Anwoth

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: VO995, total length: 1,700 mm, total width: 1,000 mm, total height: 1,150 mm, table length: 880 mm, table width: 370 mm, overall weight: 260 kg, power: 2.2 kW (2.99 HP), grinding width: 150 mm, grinding length: 2,580 mm, Machine type: LVO 120, Machine number: VO995, Year of manufacture: 2009, Main motor: 2.2 kW, Oscillating motor: 0.11 kW Isdpfxjy Nznuo Anwsth

Condition: new, Type GB/T10850 Motor power 0.18 kW Itsdpfxod Tymne Anwjh Air pressure 3-6 bar The power supply voltage 220 V 50 Hz Total power 1.4 kW Heating power 1.2 kW Edge width 8-50 mm Edge thickness 0,3-3 mm Sealing side speed 0-26 cm/s Vacuum suction of workpiece Transport dimensions Net weight 300 kg

Condition: new, 20-09- Edge banding machine WOODLAND MACHINERY (new) Price 7300 Eur (EXW Jonava, Lithuania) Motor power 0.18 kW Air pressure 3-6 bar The power supply voltage 220 V 50 Hz Total power 1.4 kW Heating power 1.2 kW Edge width 8-50 mm Edge thickness 0,3-3 mm Sealing side speed 0-26 cm/s Vacuum suction of workpiece Air pre-heating of workpiece Itjdefdu S Hspfx Anwjh Edge moulding Transport dimensions Net weight 600 kg

Condition: new, Type MM2617 Sand Pad Size 3120*170mm Sanding belt line speed 18m/s Itodpfed N S Nzsx Anwsh Working table angle 45  Working table size 1200*240mm*2 Motor 4 kW

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, We offer for sale a professional and very well-maintained HOLZ-HER 1329 edge banding machine. The machine has undergone our expert inspection, is fully functional, and ready for immediate use in production. Technical specifications and features: ● Pre-milling unit: For a perfectly sharp edge before edge banding. ● Gluing system: Unique Holz-Her technology (excellent bond strength and rapid heating). Ijdpfxjy Rk Srj Anwsth ● Complete processing: End trimming, milling, corner rounding unit for edge corner rounding, profile and flat scrapers, cleaning fluids, and polishing brushes. ● High versatility: Fully automatic operation with program selection from a library for different edge thicknesses and materials. The price is stated without VAT.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Itjdsyzxa Espfx Anwoh Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Itsdpfx Answkba Tswoh Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance Iodpfx Answka S Iowoth - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical specifications: - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life - Height-adjustable sanding table allows use of the full sanding belt width - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down - With mobile undercarriage - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm Ijdpfswkbcbjx Anwjth - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 17E000332104800, functionality: fully functional, operating hours: 300 h, 1. AUTOMATIC EDGEBANDING MACHINE Model GTM 4/3 – GRIGGIO The automatic edgebanding machine model GTM 4/3, manufactured by the Italian company GRIGGIO, is a new model launched in 2017, replacing the previous GB 4/3 model. It features a modern concept designed for straight panel edgebanding with PVC and ABS materials. The machine is equipped with the following working units: a) Gluing unit for hot-melt adhesive, featuring rapid heating and a fully Teflon-coated tank for easy cleaning. b) Pressure unit for bonding the edging to the panel – equipped with three rollers: the first is a large-diameter driven roller, while the remaining two are idler rollers with opposing tapers. c) End trimming unit with high-frequency motors designed to trim the overhanging edging flush with the panel at both the front and rear ends at a 90º angle • Installed power: 0.38 kW • Blade speed: 12,000 rpm d) Top & bottom trimming unit with two independent high-frequency motors for removal of excess edging from the top and bottom of the panel • Motor power: 0.55 kW e) Scraper unit for optimal finishing of 2 mm PVC or ABS edge banding applied to the panel edge • Supplied with a pair of knives for use with 2 mm ABS edging f) Buffing unit • Two independent motors for cleaning/polishing the edge banding • Installed power: 0.19 kW • Equipped with 100 mm diameter brushes Maximum panel thickness: 45 mm Minimum panel width: 90 mm Minimum panel length: 200 mm Feed speed: 9.5 m/min Edgebanding overhang (top + bottom): 4 mm (2+2) Pneumatic system pressure: 6 bar Frequency inverter: 200 Hz for motors, enabling 12,000 rpm rotational speed General features: • The machine frame is constructed from a single-piece, high-rigidity steel sheet. • Panel feed system is of the caterpillar type, with skids covered with high-adhesion rubber. • The skids move on dual steel guides – one round and one flat, both hardened and ground, ensuring straight movement and resistance to lateral forces from the working groups. • Upper pressure unit made of aluminum, featuring rubber pressure wheels mounted on bearings, ensures improved linear piece movement. Included spare parts kit (in machine price): - 2 upper rubber pressure rollers - 1 rubber roller for end trimming unit - 2 cotton buffing discs - 5 rubber pads for feed conveyor track - 4 adhesive pot heating elements - 1 temperature probe EXW price: €10,000 (excluded VAT) Manufactured in EU Excellent condition No pre-milling unit Isdpow Tkl Nofx Anwjth Operating hours: 300 h

Condition: good (used), Brandt edgebander (Homag group) for roll and ABS edge banding. Complete with pre-milling units at entry and all profiling groups with corner rounding units. In perfect working condition. Itsdpfx Ansy N Ukioweh

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Itedpfx Aew S Dmdenweh Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC MACHINING CENTER WITH EDGE BANDING UNIT AND ASSOCIATED POST-PROCESSING AGGREGATES. Technical Data: Working dimensions: + X-axis: 3,050 mm for single setup + X-axis: 900 mm for pendulum operation Itsdpfxoy Hrh Tj Anwjh + Y-axis: Milling up to 1,220 mm with 25 mm tool diameter Edge banding up to 1,220 mm All aggregates up to 1,170 mm Workpiece thickness up to 60 mm with standard clamp 6 workpiece consoles for a tubeless vacuum system 4 workpiece stops in X-direction, integrated into the machine frame, for large workpieces 6 workpiece stops in the X-direction, one each integrated in the console 1 workpiece stop each on the left and right in the Y-direction 4 lifting rails for easy positioning of heavy workpieces LED positioning aid for easy placement of vacuum cups and consoles Aggregate equipment: Milling spindle 11 kW, HSK F63 Speed range 0 - 18,000 rpm Liquid cooling C-axis for use with processing units, with torque support and 3-point stabilization 12-position tool changer magazine Drilling head with 17 vertical spindles Spindle pitch 32 mm Air nozzle for cleaning workpiece edges Exchangeable edge banding unit for 360-degree edgebanding work With single-roll magazine With granulate feed Edge thickness up to 3 mm Adapter aggregates: + Horizontal boring head in cross-head design + Lock case milling unit, 2 outlets + 90-degree sawing unit + Swiveling drilling/sawing unit + Combination unit for radius milling / scraper blade Control system: POWERCONTROL with: WOOD WOP AV license WOODWOP

Condition: good (used), Year of construction: 2006, System with pump and water basin, Two spindles need repair. Swivels up to 60°, Working direction: from right to left, max. height: approx. 2500 mm, Depth: approx. 1000mm, Itjdpfx Aerz Rgzsnweh Length: approx. 6200mm, Available at the beginning of October.

Condition: excellent (used), possibility of sanding on the shoe or flat surface mechanical oscillation feed speed adjustment via variator electric adjustment of the aggregate up/down sanding belt height 150 mm table angle adjustment possibility of sanding curved elements total motor power 5.7 kW Isdpfxjy N Ry Ho Anwjth year of manufacture: 1994 power supply 380V