Used Elumatec Ag Sbz 122/73 for sale (8,437)

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Bedpfxeu Thpnj Adiodc Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: ready for operation (used), Year of construction: 2013, overall weight: 2,492 kg, Circular Metal Saw manufactured in 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details. • Cutting Length (X-Axis Travel): 6,000 mm (6.0 m) • Saw Blade Diameter: 550 mm • Controller: E 355 (2-Axis Control) • Tilting Range: 22.5° to 140° (Motorized E-Axis) • Software: Module for chop cuts and overlengths (E355/E555) • Software Interface: Connection for window construction programs Additional equipment • Short length stop: Included for stationary unit • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m, mobile, 400 mm width for extraction Bdsdpfx Adoyv H Tioisc • Workpiece support: Mobile type • Extraction Unit: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Condition: ready for operation (used), Year of construction: 2005, Circular Metal Saw manufactured in 2005. This Elumatec AKS 134 features a saw blade diameter of 550 mm vertically and 500 mm horizontally, with a maximum profile height of 250 mm and a maximum feed of 830 mm. If you are looking to get high-quality cutting capabilities, consider the Elumatec AKS 134 machine we have for sale. Contact us for further details. • Saw blade diameter (vertical): 550 mm Bdedjy H Ecdspfx Adiec • Saw blade diameter (horizontal): 500 mm • Maximum profile height: 250 mm • Maximum feed: 830 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting length (max.): 6,000 mm, total length: 7,500 mm, total width: 1,500 mm, total height: 2,000 mm, Technical data – Elumatec DG 244/2, year of manufacture 2008 Control unit model: E555 – touchscreen Technical advantages of the machine: - Saw blade diameter: 550 mm - Blade speed: 2800 rpm - Compressed air supply: 7 bar - Weight: 2300 kg The machine is fully operational and can be tested on site. Price includes loading. We can also assist with delivery to the specified address. Bdedpfx Adoyv E N Aeisc The machine is located in Poland – 33350. Inspection possible by prior arrangement. Our company is situated 120 km from Kraków airport (KRK). Transport possible. Export price.

Condition: ready for operation (used), Year of construction: 1982, An Elumatec double mitre saw for aluminium and plastic profiles, including E200 positioning unit, is available. Saw head swivel: 45°, saw blade diameter: 380mm, speed: 2800rpm, max. cutting capacity: 195mm/120mm, min. cutting length: 520mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Bdodpfx Aey Hk Thodisc

Condition: like new (used), We are offering this pressure reducer for sale. Item No.: RS3602021018 5 units available in like-new condition. Price for the complete lot: €400. Operating manual included. Shipping possible. Bdodpsx Ekrusfx Adisc No returns or warranty.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 04631037, cutting length (max.): 6,000 mm, Elumatec DG 104 Double Mitre Saw (Year 2006) – Precision Aluminium Processing For sale is a used double mitre saw, model Elumatec DG 104, manufactured in 2006. This machine is specifically designed for precision machining of aluminium and plastic profiles, making it ideal for use in window, door, and façade construction. Bdedpsyvrq Tjfx Adiec Technical Highlights: - Double-sided tilting saw units for precise mitre cuts - Suitable for double mitre cuts from 45° to 90° - Robust machine construction for low-vibration operation - Pneumatic material clamping for secure workpiece hold - High cutting precision and repeatability - Intuitive operation Features: - 2 saw units - Pneumatic clamping device - Length stop - Cooling/spraying device Condition: The machine is in used, fully functional condition. Normal signs of use are present, but do not affect functionality. Application Area: Ideal for metalworking shops, window manufacturers, and workshops that require precise and efficient mitre cutting. Other: Viewing by appointment possible. Loading can be supported if necessary. All information without guarantee. Subject to prior sale.

Condition: used, Year of construction: 2010, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) Bodpsy U Tg Hofx Adiodc The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset (-5 to 15 mm as standard, 15 to 35 mm as an option) Support arms and pressing blades included as standard 2-hand operation

Condition: good (used), Year of construction: 2011, machine/vehicle number: 1423530534, Offer 26120 Technical specifications: - Saw blade diameter approx. 500 mm - Saw blade speed: 2800 rpm - Cutting area e.g. up to approx. 180 x 150 mm 150 x 200 mm - Feed length for 90° cuts: 5 - 600 mm - Mitre cuts possible up to 45° - Compressed air connection: 7 bar - Air consumption per work cycle without / with spraying: 50 / 64 l - Drive: 400 V / 4.0 kW - Space requirement approx.: W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - Incl.: - Digital display Bdodpfey Efl Nox Adioc - Pneumatic vice - Automatic shut-off at profile end

Condition: used, functionality: fully functional, power: 375 kW (509.86 HP), first registration: 01/2018, Year of construction: 2017, operating hours: 8,000 h, machine/vehicle number: WKU5826MAGL012505, Used PistenBully 600 W Polar for Sale – 2017 – Ready for We offer a used PistenBully 600 Wide Polar, year of manufacture 2017, the first registration 1/2018, in good working condition. Bjdpfx Adsy Eh Elsisdc The machine has been regularly serviced and is fully operational. It is ready for the upcoming winter season.

Condition: refurbished (used), functionality: fully functional, overall weight: 540 kg, total length: 905 mm, total width: 950 mm, total height: 1,125 mm, Year of construction: 2013, operating hours: 50 h, input frequency: 50 Hz, shaft diameter: 40 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile Bending Machine ARKUS12 Tablet350 (refurbished) For sale is a profile bending machine ARKUS12 with Tablet350 control system, year of manufacture 2013. The machine was completely refurbished in 2026 and technically upgraded to the new Tablet350 control system. With only approximately 50 operating hours since the overhaul, the machine is in an excellent, nearly new condition and is available immediately. Bodpfx Adsy Exdfeiedc Technical Data: Machine type: Profile Bending Machine Manufacturer / Model: ARKUS12 Control system: Tablet350 (2026 upgrade) Year of manufacture: 2013 Operating hours: approx. 50 hrs Condition: As-new, fully refurbished and upgraded Warranty: 2-year warranty on electronics Availability: Immediate Further technical details and specifications as per manufacturer can be found at pbt-ag.com. Note: The sale is made under exclusion of liability for material defects, except for the stated warranty.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, We offer this ready for use Elumatec DG 104 Double Miter Saw, year of construction 1995. Machine is fully working. 6m long, 3 axis Manufacturer: Elumatec Model: DG 104 Year of manufacture: 1995 Machine type: Double Miter Saw Bjdpfx Asy Hpfvodijdc If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 500 mm, Equipment: documentation/manual, Technical data and cutting diagram can be downloaded on the right. 730 mm per stroke, limited to 3 repetitions. Saw blades Ø 500 x 4.4 x 30 mm. Cutting only at 90° angle. Maximum cutting length with 3 repetitions: 2180 mm. Bsdpfsy D Sywox Adiodc

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, working width: 2,440 mm, welding power (max.): 1,200 kVA, wire diameter (max.): 12 mm, type of input current: AC, wire diameter (min.): 4 mm, Refurbished Schlatter MG903 - PG24 Bdjdpfx Aey D H T Esdijc - Longitudinal wire inserter LFE - Longitudinal wire feeder LV - MG24.4 mesh welding machine - Cross wire feeder QF8 - Mesh output MVL4.2 - Mesh stacker MS12 - Control and power cabinet - Siemens S7 TIA machine control Mesh width: 2450mm Wire: 4-12mm

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 1,240 mm, welding power (max.): 420 kVA, wire diameter (max.): 8 mm, type of input current: AC, mesh size: 25 mm, working length: 4,000 mm, wire diameter (min.): 2 mm, Machine Profile: Schlatter MG900 PG12 The Schlatter MG900 is a high-performance, fully refurbished resistance welding line, specifically designed for the production of wire mesh panels. It can process wire diameters of up to 12 mm with a maximum mesh width of 1,250 mm and a length of up to 3,000 mm. The machine has undergone comprehensive modernization to ensure maximum efficiency and flexibility in production. Technical Specifications 1. Main Components: Longitudinal Wire Feeder LV - Upgraded to a high-precision servo axis. - Magazine feeders for wires up to 3,000 mm in length. MG12.4 Mesh Welding Machine - Fitted with 6 transformers. - Four (4) Schlatter welding presses, 5 kN each. - Machine upgraded to 12 welding presses. Cross Wire Feeder QFD34 - Allows double wire insertion for two different line wires. - Note: The second tier is not yet installed in the photos. Mesh Extraction MVL - Driven by MS2N servo motor with CtrlX by Bosch Rexroth. - Equipped with three Schlatter mesh grippers (expandable on request). Bodpfoy D Huiex Adijdc Mesh Stacking Unit MS - Automatic stacking of mesh panels (travel distance 3,100 mm). Control and Power Cabinet - Siemens S7 TIA machine control system. - Rexroth CtrlX components for high-dynamic motion control. Longitudinal Wire Loader LFE - Not included, available on request. Special Features and Advantages: - Full Refurbishment: Machine has been completely overhauled and modernized, with warranty included. - Efficiency: Fully automated operations via mesh stacker and servo-driven longitudinal wire feeder. - Future-Proof: Equipped with the latest technologies and control components. Specification: - Mesh width (cross wire length): max. 1,250 mm / min. 200 mm - Mesh length, with manual loading: max. 3,200 mm / min. 300 mm - Maximum distance between outermost line wires: 1,200 mm - Longitudinal wire spacing: 25 – 150 mm - Cross wire spacing: min. 12.5 mm, infinitely programmable - Longitudinal wire diameter: 2.0 – 10.0 mm - Cross wire diameter: 2.0 – 8.0 mm - Maximum number of longitudinal wires: 24

Condition: used, Year of construction: 1998, Hinge drilling machine for processing aluminum profiles with pneumatic material clamps and micro-spray device Processing length: max. 2400 mm Wing profile width max. 108 mm Frame profile width: max. 200 mm Profile height: 45-80 mm Bdsdpfx Adey Anhnsiec Spindle speed: 1900 rpm. Weight: about 500 kg

Condition: excellent (used), Shipping within the EU: 350 euros Bedpfx Aol Sklgjdisdc

Year of construction: 2018, condition: used, Manual length adjustment via handwheel with digital display For mounting on any Elumatec single- blade saw (left) Max. feed length: 3,000 mm Pneumatic parking brake Bsdpeyz U T Isfx Adiedc

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, controller model: E555 Touchscreen, overall weight: 2,300 kg, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Max. cutting length: 6000 mm Saw blade diameter: 550 mm Saw blade speed: 2800 rpm MACHINE DETAILS Control: E555 touchscreen Compressed air supply: 7 bar Dimensions & Weight Dimensions (L x W x H): 7500 x 1500 x 2000 mm Weight: 2,300 kg Bdedpfx Ajy Egahjdiec

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2011, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, wheelbase: 9,300 mm, Year of construction: 2011, Axle configuration Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 12,920 kg Payload: 26,080 kg Gross vehicle weight (GVW): 39,000 kg Maintenance APK (main technical inspection): valid until 08/2026 Condition Bedpfx Aeyza Hmsdiodc Overall condition: very good Technical condition: very good Visual condition: very good

Year of construction: 2001, condition: used, functionality: fully functional, machine/vehicle number: 8340020123, For sale: ELUMATEC EV 834 cleaning machine. The machine is in working condition. Bdedpfxoy Dfgks Adijc

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, power: 4 kW (5.44 HP), overall weight: 81 kg, total length: 590 mm, total width: 440 mm, total height: 360 mm, 2 magnetically coupled centrifugal pumps made of stainless steel. ! Price per unit ! Last used for pumping caustic soda. Manufacturer: CP Pumpen AG (Switzerland) Type: MKP 20-15-160 Design: Monobloc with base plate Delivery rate: 5 m³/h (1.38 liters/second) Delivery head / Pressure: 21.1 meters (2.1 bar) Medium temperature: 35 - 40 °C Impeller Ø 153 mm Speed: 2950 rpm Material (casing and impeller): 1.4581 Includes bolts and plug for connecting cable Motor: Siemens Type: 1LE10011BA222FA4 Power: 4 kW Voltage: 400 Volt Efficiency: IE2 Dimensions: Bdjdjwncv Rspfx Adijc Length: 590 mm Width with temperature sensor: 440 mm Base plate width: 330 mm Height: 360 mm Weight: 81 kg Inlet: DN 20 Outlet: DN 15 ! Price per unit !

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Large milling area despite compact design Copy milling using lateral stops or templates at a 1:1 ratio Pneumatic copy pin, two-stage, for two different cutter diameters The patented suspension of the copying lever ensures precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Easy tool change via spindle lock Pneumatic material clamping device Metering spray unit Options: Copy templates milled for standard handle holes and PZ milling Copy pin Collet chuck Bedpfjxqihisx Adiedc Stop system Material clamping device with 2 clamping cylinders Milling cutter 8 mm Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 1998, functionality: unexamined, Collamat labelling system Bjdoyy Sxfopfx Adijdc Year of manufacture: 1998 An intermittent application speed of up to 50 m/min and working widths of up to 160 mm provide you with a wide range of applications. Label roll diameter: 250 mm / 350 mm

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: type plate available, AE 100 liter reactor vessel, enameled steel, manufacturer Estrella AG, Switzerland. Year of construction 1995, total capacity 135 liters, double jacket with 40 liter capacity. Perm. operating pressure vessel -1/+6 bar, perm. operating pressure double jacket -1/+6 bar. Perm. operating temperature -25/+200°C, enamel color blue, impeller agitator, mechanical seal. Hand hole, sight glass lamp, 400 V EX drive, bottom drain valve, baffle with PT 100 temperature probe. Bsdsu Ibgtspfx Adiodc For questions and further information please contact us, we will be happy to answer your questions, Cycron GmbH