Used Ewag Ws 11 for sale (14,184)

Condition: used, Gear motor, electric motor, three-phase motor Nsdpfxoffakbs Ai Town -Handover: as is as on pictures -Fixing: damaged -Power: 2.2 kW -Speed: 11 rpm -Shaft: Ø 60 x 120 mm -Construction: B3 -Protection class: IP55 -Dimensions: 745/340/H345 mm -Weight: 119 kg

Condition: good (used), Three-phase motor, electric motor -Power: 11 kW -Speed: 1440 rpm -Voltage: 380/660 V -Shaft: Ø 38/80 mm Nwjdpfxed R Dtto Ai Tjn -Construction: B5 -Protection class: IP44 -Price: per piece -Number: 3 pieces -Dimensions: 520/286/H330 mm -Weight: 86 kg

Year of construction: 1986, condition: used, • Working length (mm): 3200 • Drilling units: 3 from below, with a 3-spindle drilling head Nwsdo Drmxepfx Ai Tjn • Clamping cylinders: 2 from above • Pressure cylinder: 1 on the side • Control system: Siemens, newer model

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Stankoimport Caenaho, hydraulic unit -Motor: 220/380 V/ 1400 rpm -Individual components: Technical data see photos type plates -Dimensions: 420/380/H310mm -Weight: 30 kg Nedpfoupbd Hjx Ai Tjwn

Condition: reconditioned (used), 1 pair of PERSKE flat motors, 5.5 kW each, well suited for pre-cutting circular saws in front of band saw lines, one with a right-hand thread and one with a left-hand thread, rated continuous power 5.5 kW, with new ball bearings, with 2 steel brackets (left and right) for mounting 1 KATT circular saw flat motor, 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second shaft stub for hydraulic pump drive with 150 mm Ø pulley, tested and fitted with new bearings, suitable e.g. for PAUL 27 AO cross-cut saw Nodpouqk Azefx Ai Tewn

Condition: excellent (used), Year of construction: 2021, operating hours: 1,926 h, variable screw compressor ALMIG F-DRIVE 8 (5 to 13 bar) Cotroller: Aircontrol Premium Year of construction: 2021 Operating hours: 1926 Bh Technical specifications Type: F-Drive 8 Possible operating pressures of the system Nedpfxeuz T N Hj Ai Tjwn (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0,16 to 1,32 m³/min at 6 bar (g): 0,20 to 1,27 m³/min at 7 bar (g) : 0,23 to 1,21 m³/min at 8 bar (g) : 0,27 to 1,16 m³/min at 9 bar (g) : 0,27 to 1,11 m³/min at 10 bar (g) : 0,31 to 1,05 m³/min at 11 bar (g) : 0,31 to 0,99 m³/min at 12 bar (g) : 0,33 to 0,95 m³/min at 13 bar (g) : 0,38 to 0,89 m³/min Nominal power drive motor: 7,5 kW Degree of protection / insulation class drive motor: IP 55 / ISO F Operating voltage / frequency: 400/50/3 V / Hz / ~ Compressed air connection: 3/4“ G Length: 660 mm Width: 690 mm Height: 1586 mm Weight: 356 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: ready for operation (used), Stöber FDS5055/L Posidrive servo drive HW 11 SW 5.3C, serial number: 8702144, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Nodpfjz Ac I Hex Ai Tswn

Condition: ready for operation (used), functionality: fully functional, Universal tool grinding machine DECKEL S 11 with accessories & tool cabinet Nwodpfszx R Awsx Ai Ten -Grinding stroke 190mm -Grinding stroke during orbital grinding 190mm -Longitudinal adjustment of the grinding spindle approx. 5mm -Vertical adjustment of the grinding head approx. 320mm -Transverse adjustment of the tool slide approx. 100mm -Adjustment ranges: -Grinding head carrier approx. 800mm -Tool carrier approx. 215mm -Universal / dividing head approx. 330mm -Swivel angle / grinding head carrier 360 degrees / grinding head 360 degrees / tool carrier 360 degrees -Clamping surface of the tool slide approx. 500x180mm -Max. workpiece diameter between centers 130mm -Max. workpiece diameter / overhanging clamping (universal dividing head) 620mm -Digital display -Measuring optics -Further accessories (SEE PICTURES) -Documentation -Tool cabinet Errors and omissions excepted.

Condition: used, mileage: 99,630 km, first registration: 11/2014, fuel type: diesel, color: white, gearing type: mechanical, Year of construction: 2014, Nissan Cabstar 32.12 NT400 with Topy 11 aerial work platform // 11 meters! ---- * Manufacturer: Nissan * Model: Cabstar NT400 32.12 * First registration: 11/2014 * Mileage: approx. 99,630 km * Diesel * French registration Superstructure: * Manufacturer: France Elevateur * Model: Topy 11 * Working height: approx. 11 meters * Platform height: approx. 9 meters * Operating hours: approx. 2,549 * Good condition * Video and further photos available upon request (WhatsApp Erik) * Price: 13,900 euros, net + 19% VAT Nwsdpoz D Rdcofx Ai Ton ---- For further questions, please call: Erik Kortum: WhatsApp All information is without guarantee, errors and prior sale excepted.

Condition: like new (used), Year of construction: 2021, Almost New: Complete Compaction System Ludden & Mennekes SVS11+KEV 1. Stationary Screw Compactor L&M SVS 11 Virtually unused, stationary screw compactor (~1 month) designed for filling compaction containers and/or other containers. The machine is constructed from a robust, welded steel frame with continuously welded seams. Its low-maintenance screw compaction system is suitable for continuous feeding, and the compaction chamber does not require periodic cleaning. Main technical specifications Nwsdoz Eg Dzjpfx Ai Tjn Overall length: 2,480 mm Overall width: 1,660 mm Overall weight: 2,300 kg* Loading height: 1,350 mm Feed opening: 1,375 × 1,490 mm Screw diameter: 750 / 500 mm Screw speed: 17 rpm Drive power: 11 kW Residual-current device / Fused plug Type B / 300 mA 2. Hydraulic Container Coupling/Decoupling System Hydraulically operated coupling and decoupling system with forward and reverse movement. The hooking grippers are operated manually. Designed for the secure connection of different types of compaction containers. 3. L&M KEV Cardboard Intake/Deflection and Pre-Shredding Unit Virtually unused L&M KEV coarse shredding unit for bulky cardboard packaging, cardboard tubes with cores, and other large-format packaging materials. The material is reduced to a size suitable for efficient compaction, helping to improve compactor utilization and reduce disposal costs. The unit can be installed above L&M self-compacting containers or stationary compaction systems so that shredded material falls directly into the filling opening. Main technical specifications Dimensions (L × W): 1,230 × 1,490 mm Shredding shaft width: 1,400 mm Cutting knife diameter: 585 mm Number of cutting knives: 9 Feed opening: 960 × 1,400 mm Drive power incl. power supply: 2.2 kW + 0.75 kW 4. L&M PCS 6500 Compaction Container Main technical specifications Capacity: 32 m³ Dimensions: 6,500 × 2,500 × 2,600 mm PRICE ON REQUEST

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Nwjdpfx Aezmub Tji Tsn

Condition: excellent (used), functionality: fully functional, Manufacturer Siemens Nodpfszyzw Ujx Ai Tswn Power 11 kW Speed 1455 rpm

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK 2000-Litre Pressure Tank – English Translation The CORMAK pressure tank with a capacity of 2,000 litres and a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing the compressor's operating parameters. Nedpfozznuvsx Ai Tjwn Key Advantages of the 2,000 L Pressure Tank Professional pressure-vessel construction – made of high-grade 5 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 2,000 litres – provides a stable supply of compressed air and reduces the frequency of compressor start-up cycles. Multi-connection system – equipped with 5 connections in 2" and 1/2" sizes, allowing flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – the vertical construction helps save valuable space in industrial facilities. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 5 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE marking and the identification number of the UDT notified body, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure-vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 2,000-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of compressed-air-powered equipment and significantly extends the compressor's service life by reducing the number of start-up and shutdown cycles. The vertical design allows for compact installation, which is particularly important in facilities where space is limited. Standard Equipment Connection ports: 5 pcs. – sizes 2" and 1/2" Nameplate with CE marking UDT notified body identification number Complete technical documentation and pressure-vessel passport External anti-corrosion coating Technical Specifications Parameter Specification Weight (kg) 360 Number of connections 5 Connection size 2", 1/2" Dimensions 289 × 101 cm Tank capacity (L) 2,000 Working pressure (bar) 11 Wall thickness (mm) 5 Diameter (mm) Ø 1,010 Height (mm) 2,890

Condition: used, Palettenstretchmaschine mit 2,70 Stretchhöhe! - Pallet Wrapping Machine with 2,70m Stretch high. Palettenstretchmaschine - Pallet Wrapping Machine CYKLOP GL110/11 110 02 Nodpfx Aijzzy S He Town Serial-No. 870315 Palettenstretchmaschine mit Auffahrrampe / Wrapping machine with ramp  Palettenstretchmaschine mit 2,70 Stretchhöhe Pallet Wrapping Machine with 2,70m Stretch high Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, functionality: fully functional, machine/vehicle number: 33051, mileage: 23,900 km, power: 235 kW (319.51 HP), first registration: 02/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 11.6 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Nedpfxjz E Nxne Ai Tewn Further comparable vehicles are available upon request. Engine D0836LFLBI, reinforced clutch, MAN Tipmatic 12 12 ODr, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full brake assist, emergency brake assist EBA, emergency brake signal, front axle with leaf suspension, rear axle with air suspension and level adjustment, differential lock, MAN EVBec engine brake with adjustable stages, lane departure warning LDW, daytime running lights LED, heated fuel filter, trailer hitch Rockinger 400G150B (40 mm), steel bumper Cab C (2240 mm wide, 1620 mm long), air-suspended driver's seat with seat heating, central locking with remote control, speed limiter, tinted windshield and door windows, tilting roof, heated and electrically adjustable mirrors, electric windows, automatic climate control, multifunction steering wheel, safety automatics, cruise control, on-board computer, MAN Mediasystem Navigation Advanced radio, reversing camera, smoker's package, 2 rotating beacons on the roof, pre-installation for Toll-Collect, digital tachograph CONTI, connectivity board module (RIO box), sun visor on the driver's door, sun shield horizontal tank, tank wall thickness 6 mm, total air volume approx. 11.6 m³ (sludge chamber approx. 9 m³ / water chamber approx. 1 m³), 1x piston lock, piston with 2 piston seals and seal pressure regulation, water chamber welded into the front of the tank with inspection opening, water chamber level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow path, rear flap hydraulically opened upwards over the entire cross-section with pipe rupture protection, manual lid locking by means of toggle closures, sludge chamber level indicator with external scale with graduation every 500 l and internal float, lower and upper suction connection DN 100 with Perrot coupling system and blanking cap, stainless steel discharge chute, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 150 (850 m³/h) hydraulically driven, 4-way valve pneumatically controlled from the operator platform, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 60 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation stepless, small hand-operated HD reel made of stainless steel designed for 60 m HD hose DN 13, 40 m are installed, spray gun, operator platform made of stainless steel with LED lighting, remote control, hose boxes made of stainless steel on both sides, waste container made of stainless steel, tiltable at the rear left, tool box made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights on the right and left of the tank, 1x LED rotating beacon at the rear, reversing camera.

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Handover: in its current condition as inspected -Note: Check the condition of the wheels -Heavy-duty transport wagon: Industrial trailer with single-axle steering -Beam spacing: 5860 mm / Height adjustable from 850 to 1255 mm Nwodoxuqp Aepfx Ai Tsn -Load capacity: 11 t -Tires: 405/130-305 solid rubber dual tires -Overall dimensions: 7600 / 2000 / H 850 mm -Weight: 1080 kg

Condition: used, mileage: 2,968 km, power: 20 kW (27.19 HP), gearing type: other, fuel type: electric, color: yellow, overall weight: 3,281 kg, empty load weight: 2,380 kg, maximum load weight: 2,000 kg, first registration: 12/2014, emission class: none, suspension: other, Year of construction: 2014, operating hours: 2,968 h, total length: 3,930 mm, driver cabin: other, construction height: 2,400 mm, fuel: electricity, Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Specialty vehicles - Fleets Other: Nedjwbammepfx Ai Tewn - Various loading options - Registration service - Delivery within Germany possible for an additional charge Viewings are also possible without prior appointment: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: Email: Further information can be found at We speak German / English / Russian / Italian / French / Spain More Information Sales only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.

Condition: good (used), three-phase motor, electric motor Nwedpfx Aijv Ul Dfo Tjn -Manufacturer: VEM, electric motor type KPER 160 M4 -Power: 11 kW -Speed: 1440 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP54 -Design: B5 -Dimensions: 525/260/H320 mm -Weight: 87 kg.

Condition: excellent (used), Auxiliary circuit breaker, miniature circuit breaker, fuse, circuit breaker, miniature circuit breaker, load break switch, terminal block, load disconnector, fuse-switch disconnector -Manufacturer: wöhner, NH fuse base with touch protection, 11 pieces, unused, original packaging -Type: NH Gr. 00 125 A Nwsdpfeyky E Tjx Ai Tsn -Dimensions: 145/35/H90 mm -Quantity: 1 box containing 11 items available -Submission/Price: complete -Cardboard dimensions: 300/165/H115 mm -Weight: 1.7 kg

Condition: used, Year of construction: 2006, HORIZON VAC-60Ha / Hm / Hc Collators The Horizon VAC-60 series (Ha, Hm, Hc) are modular air-suction collators designed for professional print finishing, offering precise, fast, and reliable sheet handling. Key Features Modular system: Each collator includes 6 feeding stations; expandable up to 6 towers (36 stations total). Advanced air-suction feeding: Ensures consistent and reliable sheet transport for a wide paper range. Flexible format range: Handles sheets from approx. 120 × 148 mm to 500 × 350 mm, with paper weights from 40–300 g/m². Nedpfx Aijylkw Aj Tjwn High-speed productivity: Processes up to 9,500–10,000 sets per hour, depending on setup. User-friendly operation: Models Ha and Hc feature “Touch & Work” technology for quick setup and control. Efficient integration: Model Hm serves as an expansion module without its own controls. Error prevention: Equipped with sensors for misfeed, double-feed, and jam detection. Job memory: Up to 9 programmable settings for recurring jobs. Technical Specifications Dimensions: approx. 842 × 652 × 1,961 mm Weight: about 310–315 kg Power supply: 230V, 50/60Hz, 1.86 kW Loading height: 130 mm per station All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input current: 14 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 118 mm, cutting width (max.): 1,270 mm, saw blade diameter: 350 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, total length: 3,550 mm, total width: 2,200 mm, total height: 1,600 mm, overall weight: 630 kg, Equipment: CE marking, documentation/manual, saw blade guard, – Italian manufacture – Year of production: 2006 – Operating manual and CE certificate TECHNICAL SPECIFICATIONS: – Carriage length: 3200 mm – Cutting width on the right side: 1270 mm – Blade diameter: min. 250 mm, max. 350 mm – Scorer blade diameter: 120 mm – Main motor: 5.5 kW – Scorer motor: 0.55 kW – Brake – Main blade spindle diameter: 30 mm – Scorer spindle diameter: 20 mm – Cutting height adjustment – Cutting angle adjustment: 0° - 45° – Max. cutting height at 90° (350 mm blade): ~118 mm – Max. cutting height at 45° (350 mm blade): ~84 mm – Two ratchets – Moving guard Nwedjy Ax Niopfx Ai Tjn – Carriage dimensions (length/width): 3200 x 315 mm – Extraction port diameter: 80 and 120 mm – Overall dimensions (L/W/H): 355 / 220 / 170 cm – Weight: ~630 kg

Condition: new, functionality: fully functional, operating pressure: 130 bar, empty load weight: 164 kg, input voltage: 230 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM CA 11/130 TR TECHNICAL DATA: Model: KRANZLE THERM CA 11/130 TR Nwedsy Shl Sspfx Ai Ten Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 1 / 230 / 50 Pumping capacity (l/h): 660 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 130 Maximum pressure (bar): 145 Connected power (kW): 3.4 / 2.3 Weight with accessories (kg): 164 Fuel tank capacity (l): 25 KRANZLE THERM CA 11/130 TR WASHER EQUIPMENT KRANZLE pressure gun (M22 / quick coupler) KRANZLE spray lance (quick coupler) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. Integrated pressure hose reel 15m professional-grade pressure hose External water filter by KRANZLE WHY CHOOSE THE KRANZLE THERM CA 11/130 TR? The THERM CA 11/130 TR is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. A major advantage of this model is its power supply via a single-phase 230V socket, which translates into high mobility in terms of power supply points. The THERM line emphasizes smooth operation and continuous operation, making the CA 11/130 TR a unit suitable for use in a broad range of industries. Additional handles allow for easy transport of the device with additional accessories. A brass pump head extends the life of the device. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 15m high-pressure hose, a reel, a 25° power nozzle, and an external water filter. The device also features a quick-connect attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM CA 11/130 TR RELIABLE | DURABLE | ERGONOMIC Thanks to its frame, the device can be used in hard-to-reach places or where work often requires repetitive use. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the life of the device. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling performance even with fluctuating ambient and water temperatures. Standard features include a high-pressure gun with lance, a 15m high-pressure hose reel, and a power nozzle. The device also features a quick-connect attachment system, allowing for 5x faster accessory changes than traditional threaded connections. Single-phase power supply (230V) Original, integrated high-pressure hose reel included! The device is brand new and factory-sealed.

Condition: excellent (used), Air-operated, water-cooled 3-phase direct current spot welding machine make DALEX type PMS 11-4 G3 Nwodpfeu A Dg Ejx Ai Tsn Asload: 650 mm with special cylinder with low pressure range of 20-120 daN Rated power at 50 % duty cycle 60 kVA Sec. short-circuit current: 25 kA sec. open-circuit voltage: 3.68 V with add-on switch cabinet in accordance with VDE 0100 Main switch Synchronous welding control 8036 Weight: 685 kg

Condition: new, diameter / mm Cutting (quantity) / Nwedpfx Asu Dbz Aei Ten weight / kg Rotor type: rotor FK.213.570 11 05.01 MAT number: 000.213.570 Condition: new incl. test report

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m Nwsdpexbx R Iofx Ai Ton -Number: 3x steel cable available -Price: per piece -Transport dimensions: Ø 440 x 110 mm / Ø 430 x 95 mm -Weight: 10.7 kg / 11 kg