Used Excetek Die-Sinking Edm for sale (4,783)

Condition: good (used), Drossert ST 3B Cauhe Die cutting machine The machine is fully operational, ready for production. Weight 3500kg Power supply 380V Production under the Drossert Maschinenbau GMBH Germany brand by the Cauhe factory in Spain. Equipment: – pneumatic clutch and brake – console – 3 operating modes: single, continuous, with time delay on opening Dcjdpfjztpa Rox Adrjn – central lubrication – additional safety covers – hard sheet metal for pressure

Condition: new, Outer dimensions (width x height): 80 x 80 mm Overall length: 6050 mm Divided into: 2x25/30/35/40/45/50/3x100/11x500 mm Permissible load: 200 t/m Material 42CrMo4, hardened (plasma deep-nitrided: Dcodpey N S Irefx Adrsn hardness approx. 700 HV, 58 - 63 HRC, depth 0.4 - 0.5 mm), ground

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M08E/9110, Offer Number: M08E/9110 Machinetype: 2 die - 3 blow transfer header Make: NAKASHIMADA Dsdjyya Rpspfx Adrocn Type: NP80 Constr. year: 1992 diameter range: 10 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 100 mm shaft length under head: 80 mm output - pieces/min: 150 press power: 60 t Location: Europe

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M14I/9096, Offer Number: M14I/9096 Machinetype: thread rolling machine - flat die Make: PELTZER-EHLERS Type: NKW-16 Constr. year: 1977 diameter range: 8-16 mm shaft length under head: 25-160 mm max. thread length: 80 mm Dsdpfx Asyya Sgsdrecn output pieces/min: 100 Location: Germany

Condition: used, functionality: fully functional, overall weight: 4,500 kg, Drossert die-cutting press, working area 72 x 102 cm, 1 frame, various operating modes, single cycle, continuous operation, programmable with timer, safety mats. Dcjdpfx Adoyu H Ivjrsn

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total length: 1,050 mm, total width: 650 mm, workpiece height (max.): 250 mm, AGIECUT Excellence 3 eCut Year of manufacture: 2005 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Djdpfx Ajyu Iq Eedrecn Submerged tank machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient machine setup Including AGIESETUP 3D AGIEVISION control system AGIE IPG generator with eCut technologies Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Includes user training at Techma on your overhauled machine Optional services available on request: - Transport - Commissioning - Chiller unit - Clamping devices

Condition: used, Year of construction: 2003, operating hours: 25,407 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Dcjdpfx Adozkhgdsron Automatik Threading Working Hours 25407 Std Verfahrwege X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year 2003

Condition: used, FANUC Robocut C 600 iA is a wire cutting EDM designed for precision, high accuracy and reliability. Working table 600×400 mm; max workpiece 1050×820×300 mm; table load 1000 kg; travels X600 Y400 Z310 U200 V200; wire from 0.1 mm. Power supply 50 Hz 3x 400 V; total power 11 kVA; machine weight ~1500 kg; overall 1800×1600×2000 mm. Accessories: lamp, automatic wire threading, Daikin cooling unit, automatic sliding door, glass rulers X,Y, rotating spindle Hirschmann F. Enables tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Dedpfx Ajyxprtsdrocn

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Dedpfx Adjy Rumaorjcn Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate Dodjy Rummspfx Adrscn

Condition: used, Year of construction: 2006, Wire erosion / EDM Travel distance X: 300 mm Travel distance Y :200 mm Travel distance Z: 200 mm max. workpiece size X: 500 mm max. workpiece size Y: 300 mm max. workpiece size Z: 200 mm max. workpiece weight: 300 kg table size X: 536 mm table size Y: 337 mm with AWF ( Automatic Wire Feeding ) U / V axis: 80x80 generator: 60 Ampere submerged Control: Sodick LN1W Taper Cutting Capacity: ±20° / 80 mm Wire Diameter: 0.15–0.30 mm Dcodpfxjy Uvpdo Adrjn

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Dedpfxsznk Aio Adrecn -Punching tool: Square notching die for profile steel shears and flat steel shears -Width: 50 mm -Dimensions: see photos -Dimensions: 175/60/H125 mm -Weight: 6.6 kg

Condition: good (used), Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool Djdpfx Asznk R Tsdrecn -Withdrawal device: for square notching dies -Dimensions: see photos -Quantity: 2x pullers, 1x with fine thread -Submission/Price: complete -Dimensions each: 200/140/90 mm -Weight: 2.4 kg/pc.

Condition: new, Year of construction: 2020, Electric furnace MELTEC Typ ZC50/180 TOC incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) Electric heating with heating elements. Transfer of melt below bath level from melting to casting chamber by pump to provide constant bath level together with shot to shot consistency. Crucible content: 820,0 kg/Zn Dcedpfjy E Tynex Adren Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 50/180 TOC suitable for DAW 50F and W50Zn

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Dcedpfeyz Adnjx Adrjn Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Condition: used, Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Travel X 350 mm / Y 250 mm / Z 220 mm incl. chiller Automatic wire threading Water bath Dedpjx Hghusfx Adrocn

Year of construction: 2012, condition: used, X: 550 mm, Y: 350 mm, Z: 400 mm, Ra ≈ 0,07 μm Tel Erezyon Djdpfszxrh Ujx Adrecn Makinesi (Wire EDM)

Condition: used, Die-cutting machine – Swivel frame die-cutting machine – Flatbed die-cutting machine – Toggle press – Eccentric press Die-cutting machine + feeder for use with strip-type die-cutting tools Flatbed die-cutting machine HELMERDING, type PSH 25 Item no. EP 97784, Machine no. 6073, Year of manufacture 1998 Pressing force 25 tons Distance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = installation frame, width 510 x depth 440 mm, plate thickness 20 mm Punch area 800 x 670 mm Through-hole in the table 490 x 420 mm Punch stroke 45 mm Punch adjustment distance 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min Motor power 15 kW Dcsdpjdzqmzefx Adren Mains connection 400 volts, 50 Hz - controlled drive for stepless stroke rate adjustment - pneumatic clutch-brake combination - punch equalizing cylinder - automatic central lubrication system VOGEL - massive base plate with 4 vibration damping elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Previously, the machine was used for die-cutting cardboard sheets. Ideal for die-cutting non-woven fabrics or similar materials for respiratory masks.

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 Dsdpfsxpqy Dsx Adrjcn CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 591.063.002.0050, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, The AgieCharmilles CUT 300 Sp is a high-performance and versatile wire EDM, ideal for precision manufacturing of molds, prototypes, and complex components, offering: * extensive spatial travels Dedpfswwrk Nox Adrocn * large dielectric capacity * ability for taper cutting * robust CNC control system.

Condition: good (used), Year of construction: 1997, Die cutting press, make Drössert Dcodpjya Hf Sofx Adrjn Size: 100x140 Year of manufacture: 1997

Condition: used, Year of construction: 1962, machine/vehicle number: 137806, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTYear 1962 - Serial-No. 137806 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmKomplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Dedpfeh Axu Hsx Adrjcn

Condition: used, Year of construction: 1964, machine/vehicle number: 149218, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTYear 1964 - Serial-No. 149218 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmKomplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Dedsh Eg Tfopfx Adrecn Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1968, Buchdruckzylinder / Letter Press Zylidner DIE Cutter Heidelberg SBDYear 1968 Size min. 290 x 400mm Size max. 640 x 890mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 6.200kg3Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Dcedpfx Aderkqi Uorsn

Condition: used, machine/vehicle number: 52, Letter Press Tiegel DIE Cutter Heidelberg GTS Serial-No. 52 931 N Size min.: 85 x 102mm Size max.: 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Punching pressure: 60T Weight approx. 2250kg Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video Dodpfxjun Dxwj Adrocn We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test