Used Fasti 509-40-4 for sale (64,399)

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 11,481 h, load capacity: 4,000 kg, lifting height: 7,139 mm, free lift: 2,350 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, fork carriage width: 1,430 mm, fork length: 1,400 mm, empty load weight: 7,380 kg, total length: 4,650 mm, drive type: Diesel, construction width: 2,250 mm, opening width: 1,500 mm, Side loader Load center: 700 ISO class: 3B Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 27x10-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 27x10-12 Csdpfxez Ifqre Adrorh Rear tire condition: 40 - 60% Battery year of manufacture: 2009 Cabin, heater, full free lift, lighting according to StVZO (German Road Traffic Act)

Condition: used, mileage: 1,000,820 km, power: 220 kW (299.12 HP), first registration: 01/2011, fuel type: diesel, number of seats: 40, gearing type: automatic, emission class: euro5, color: beige, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro O530 Ü 100 Km/h (40+1+3 emergency seats) with seatbelts, full air conditioning (Vehicle 729) First registration: 18.01.2011 1,000,820 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 04/2027 Permissible gross vehicle weight (GVW) 18,600 kg, unladen weight 11,760 kg, payload 6,840 kg Overall length 11,950 mm x overall width 2,550 mm x overall height 3,400 mm Tires 275/70R22.5, front approximately 90%, rear approximately 40/40% Double doors front and rear Driver's cab with door Ramp Fully automatic transmission Microphone Electric windows 2 x electric + heated mirrors Full air conditioning Auxiliary heating + 2nd heater Stop brake 40+1+3 emergency seats Emergency exit 12-volt socket Chassis with slight surface rust 01.12.2024: Air suspension on the rear axle, left side, replaced 20.02.2024: Air conditioning compressor replaced 20.03.2024: Axle ventilation replaced ABS sensor on the rear axle, right side, replaced with sealant Rear axle hub replaced Front axle triangular wishbone replaced Cjdpoz H Ecfefx Adrorh 06.05.2024: Rear axle, right side, sensor replaced 10.07.2024: Triangular wishbone, right side, lower arm replaced Air suspension on the rear axle, left side, rear, replaced Multi-circuit safety valve replaced 24.09.2024: Water hose for transmission cooler, thermostat, and water filter replaced 08.08.2025: Front axle brake pads replaced 08.08.2025: Rear axle brake pads replaced 06.01.2026: 6 x valve covers replaced 20.02.2026: Seal between crankshaft and flywheel replaced Stabilizer bar on rear axle replaced Various signs of wear and tear, consistent with age Last inspection on 02.10.2025 at 974,472 km, next inspection due at 1,034,472 km Price: 8,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Errors, typos, and prior sale are subject to change.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 16,338 h, load capacity: 4,000 kg, lifting height: 3,800 mm, fuel type: electric, mast type: simplex, construction height: 2,754 mm, fork carriage width: 1,350 mm, fork length: 1,100 mm, empty load weight: 8,374 kg, total length: 3,150 mm, drive type: Elektro, construction width: 1,450 mm, Electric four-wheel forklift Load center: 600 ISO class: FEM 3 A Mast type: Standard Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 355/45-15 Csdpfxez Ifwre Adrorh Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 2 x 23x9-10 Rear tire condition: 60 - 80% Battery voltage: 80V Battery capacity: 775Ah Battery year of manufacture: 2018 Dual auxiliary hydraulics, dual pallet fork, cabin with heating, battery, 2 work lights at the front, 1 work light at the rear.

Condition: used, mileage: 599,947 km, power: 213 kW (289.60 HP), first registration: 12/2013, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 07/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any warranty whatsoever, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typographical errors, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 115) First registration: December 16, 2013 599,947 km Engine: 6,871 cc 213 kW / 289 hp Euro 5 EEV Crodpez Iihuofx Adreh MOT until 10/2026, technical inspection until 07/2027 Permissible total weight: 19,500 kg, unladen weight: 11,285 kg, payload: 7,215 kg Overall length: 11,895 mm x overall width: 2,550 mm x overall height: 3,225 mm Double doors at the front and rear Driver's cab with door 38+2 emergency seats + 40+1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave 2 x electric mirrors + mirror heating 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo system connected to the cash register Tires: 275/70R22.5, front approx. 60%, rear approx. 80/80% Various signs of wear and tear, consistent with the age Good overall condition Last inspection at 565,195 km on April 23, 2025, next inspection at 625,195 km January 20, 2025: Air reservoir replaced. October 2, 2025: Head gasket + valve cover gasket + engine mount on the passenger side rear replaced. January 28, 2026: Brake pads on the front axle replaced, brake caliper on the front axle, driver's side, replaced. Price: €12,000.00 (net) All information is provided without any warranty whatsoever. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: good (used), Year of construction: 1957, Ref. -No.: 10573 Manufacturer: VDF Type: W 40 Year of construction: 1957 Type of control: Konventionell Storage location: Halberstadt Country of origin: Germany Credpfx Asxmd Upsdreh Machine-No.: 030XXXX Turning Diameter: Ø 960 mm Turning Length: 4500 mm Spindle Speeds: Ø 105 RPM Turning diameter over cross slide: Ø 600 mm Further information: The machine can be viewed under power by arrangement.

Condition: used, mileage: 496,296 km, first registration: 12/2013, fuel type: diesel, number of seats: 38, next inspection (TÜV): 09/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: MAN Lions City LE A78, 38+40+1 + 2 emergency seats (Vehicle 118) First registration: 16.12.2013 496,296 km Engine: 6,871 ccm 213 kW / 289 hp Euro 5 EEV MOT valid until 12/2026 / Technical Inspection valid until 09/2027 Permissible total weight: 19,500 kg, unladen weight: 11,255 kg, payload: 7,245 kg Overall length: 11,895 mm x Overall width: 2,550 mm x Overall height: 3,225 mm Double doors at the front and rear Driver's cab with door 38 + 2 emergency seats + 40 + 1 Fold-out ramp Auxiliary heater + 2nd heater Retarder Fully automatic transmission Microwave 2 x electric mirrors + mirror heating 12-volt socket Emergency exit Stop brake Driver's seat ISRI with heating and ventilation Lawo system via IBIS cash register Tires 275/70R22.5, approximately 50% tread all around 06/26/2025: Upper rear right wishbone replaced; 12/10/2025: Front left brake hose replaced Various signs of wear and tear, consistent with the vehicle's age Good overall condition Last inspection on 12/09/2024 at 448,298 km, next inspection due at 508,828 km Cedpoz Id S Isfx Adrorh Price: €12,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Errors, typos, and prior sale are subject to change.

Condition: used, Year of construction: 1985, Technical details: Punching capacity: 40 kN air pressure - required: 8 bar ram stroke - adjustable min/max: 6 - 50 mm ram adjustment: 50 mm no. of strokes: 70 - 400 Hub/min Table dimensions: LxB: 480 x 445 mm hole in table: LxB: 250 x 112 mm slowing-down time: 80 ms bei 450 U/min. Codpfsu Icwgex Adrjrh clamping surface ram: LxB: 420 x 345 mm ram hole: Ø 40 x 230 mm voltage: 380 V control voltage: 220 V frequency: 50 Hz total power requirement: ca. 19 kVA (ca. 7,5 KW) weight of switch cabinet: 0,3 t machine weight ab.: 4000 kg 40t punching press without roll feed/conveyor belt system Operation via control panel / two-hand operation Operation: manual / automatic *

Condition: excellent (used), Overview The Single Head Wire Stitching Machine is a versatile and reliable solution for wire stitching applications, suitable for both pads and brochures. Designed for consistent performance in print finishing environments, it offers the flexibility to handle standard and loop stitching with ease. Built with a robust and durable construction, this machine is well suited to long production runs while maintaining accuracy and stability. The adjustable working table allows quick changeover between saddle stitching for brochures and flat stitching for pads, making it ideal for varied workloads. An advanced wire feed system ensures smooth and precise stitching, even when working with thicker or digitally printed materials, providing consistent results across a wide range of stock types. Optional loop stitching conversion parts are available, allowing the machine to be adapted quickly to suit different production requirements. Cedpfsyyb Rdex Adrerh Key Features Supports both standard and loop stitching for pads and brochures Heavy-duty construction for reliable, long-term operation 25mm stitch and 40mm stab capacities Adjustable table for saddle or flat stitching configurations Maximum speed of up to 203 staples per minute Table size: 700 × 240 mm Patented wire feed and cutting system for accurate, consistent stitching Suitable for thicker and digitally printed materials Optional loop stitching conversion kit available for added flexibility Why Choose the Hohner Economy 25/40 Ideal for print shops requiring a flexible stitching solution for multiple applications Simple changeover between different stitching styles reduces downtime Capable of handling a wide range of materials, including heavier stocks Reliable and durable design suited to regular production use Cost-effective alternative to larger multi-head stitching systems Optional loop stitching capability adds value and expands service offering Specifications Manufacturer Hohner Model Hohner Economy 25/40 Condition Used Mechanic cycles per minute [staples] 203 Clinched staple 25mm Capacity Stabbed from both sides 40mm Capacity Stitching table size [mm] 700 x 240 Working height [mm] 880 Throat depth from clincher box to machine body [mm] for pad stitching 95 Throat depth from clincher box to machine body [mm] for saddle stitching 290 Maximum number of stitching heads 1 Crown width [mm] 14 Round wire (standard) No. 21 – 30 Flat wire 0,70 x 0,35 mm – 0,90 x 0,78 mm Electric requirement 230/400V Single or 3phase Net weight [kg] 200 Dimensions (L)900mm x (W)700mm x (H)1540mm

Condition: used, mileage: 558,740 km, power: 132 kW (179.47 HP), first registration: 11/1992, fuel type: diesel, empty load weight: 6,200 kg, maximum load weight: 4,400 kg, overall weight: 10,600 kg, tire size: 445/70 24, axle configuration: 4x4, wheelbase: 3,200 mm, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro1, suspension: steel, Year of construction: 1992, operating hours: 558,740 h, front tire size: 445/70 24, rear tire size: 445/70 24, Equipment: all wheel drive, trailer coupling, truck registration, Vehicle number for inquiries: 41571 Unimog, 437/40 * Year of manufacture: 1992 * Trailer hitch * Analog tachograph Cedpfx Aezxa Hljdrjrh * Transmission type: Manual * Suspension: Leaf spring * Gross vehicle weight: 10,600 kg * Unladen weight: 6,200 kg * Payload: 4,400 kg * Permissible gross vehicle weight: 10,600 kg * Tire condition 1st axle: -- - Tire size: 445/70 R24 * Tire condition 2nd axle: -- - Tire size: 445/70 R24 * Wheelbase: 3200 mm * Tire sizes: 445/70 R24 * Tank inspection valid until 05-2028 * ADR certificate available * Tank: 5200 liters * Pump and meter * 3 seats * On request, we will send you a video and more pictures. Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists, we will be happy to advise you.

Condition: excellent (used), Huber Unichiller UC055Tw spec. – water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw spec. Type: UC055Tw spec. Machine type: Recirculating chiller / temperature control unit / process chiller Temperature range: -10 to +40 °C Offered is a used Huber Unichiller UC055Tw spec. with a water-cooled refrigeration unit. The unit is designed for temperature control and process cooling of external closed circuits. Operation is via the Huber Compatible Control system. Technical data: Temperature range: -10 to +40 °C Power connection: 400 V / 3~ N / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant charge: 1.07 kg Cjdpfx Adszui Uwjrjrh Max. pressure: 25 bar Refrigeration unit: water-cooled CFC- and HCFC-free The UC055Tw series is designed as a recirculating chiller for an external closed temperature control circuit. The unit in question is a special version, “UC055Tw spec.” Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1,450 mm Weight: approx. 168 kg Equipment: Huber Compatible Control temperature control Digital display Connections for external temperature control circuit Cooling water connections Drain and residual drain Interfaces on the unit Main switch Stainless steel housing Transport rollers Lifting eyes Shipping data: Due to its size and weight, transport is preferably by freight forwarder. Dimensions of the unit: approx. 600 x 600 x 1,450 mm Weight of the unit: approx. 168 kg Condition: Used condition with signs of wear and tear consistent with age and use. The exact optical condition can be seen in the pictures. Scope of supply: 1x Huber Unichiller UC055Tw spec. Connection/cooling water hoses as shown in the pictures Scope of supply as shown in the pictures The machine is available by arrangement. The scope of supply is as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Codpohmmfkefx Adrorh Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons Good condition

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 9,684 h, load capacity: 4,000 kg, lifting height: 5,500 mm, free lift: 1,760 mm, fuel type: gas, mast type: triplex, construction height: 2,690 mm, fork carriage width: 1,440 mm, fork length: 1,400 mm, empty load weight: 7,380 kg, total length: 4,600 mm, drive type: Treibgas, construction width: 2,200 mm, opening width: 1,500 mm, Side loader Load center: 700 Fork width: 150 mm Fork thickness: 50 mm ISO class: integrated Mast type: Triplex Transmission: Hydrostatic Cedpfez If Dlsx Adrsrh Technical condition: good Front tire type: Pneumatic Front tire size: 2 x 27x10R12 Front tire condition: 40 - 60% Rear tire type: Pneumatic Rear tire size: 2 x 27x10R12 Rear tire condition: 40 - 60% Battery year of manufacture: 2011 Additional single hydraulic circuit, integrated side shifter, cabin, heater, lighting according to StVZO (German Road Traffic Licensing Regulations), 2 front work lights, 1 rear work light.

Condition: used, Year of construction: 2010, The Horizon AFC 566 FKT + PST-40 folding machine, manufactured in 2016, is a high-performance solution for efficient and precise folding operations. Currently in production and located in Germany, this machine is designed to handle a wide range of sheet sizes, from a minimum of 60 x 64 mm to a maximum of 558 x 850 mm, with a maximum mechanical speed of 240 m/min (30,000 cycles/h). Equipped with a flat pile feeder capable of handling a maximum pile height of 740 mm, it ensures continuous and efficient paper feeding. The primary folding unit is an AFC-566 FKT with 6 combi folding plates, offering manual pocket and roller configuration. It features a used condition roller and a cross fold unit with 1 knife, providing versatile folding options with a maximum working width of 558 mm and a maximum fold length of 850 mm. The machine also includes a noise protection hood and touch screen control for ease of operation. The delivery mode is a PST-40 press delivery, manufactured in 2010 with the serial number 360003. It has a maximum working width of 440 mm and a pressing force of 20,000 N, ensuring efficient and organized output handling. This machine is well-suited for businesses seeking to enhance their folding capabilities with a reliable and high-performance solution. Format: 440 x 310 mm Equipment: Feeder Crsdpfx Adewcqw Soreh Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h

Condition: new, Drilling capacity in St 60 40 mm threading in St 60 M 24 mm Codpfx Ajgp Dyxodrsrh threading in GG 20 M 30 bore stroke 120 mm Short spindle MK 3 throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle - machine table min./max. 117 / 701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160 - 2250 UpM total power requirement 1,45 / 1,9 kW height of the machine 1840 mm weight of the machine ca. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 14,488 h, load capacity: 4,000 kg, lifting height: 5,500 mm, free lift: 1,850 mm, fuel type: gas, mast type: triplex, construction height: 2,700 mm, fork carriage width: 1,460 mm, fork length: 1,400 mm, empty load weight: 7,380 kg, total length: 4,900 mm, drive type: Treibgas, construction width: 2,230 mm, Side loader Load center: 600 ISO class: integrated Codpfx Adoz Ifqxjrerh Mast type: Triplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2x 27x10-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2x 27x10-12 Rear tire condition: 80 - 100% Battery year of manufacture: 2011 Additional single hydraulics, integrated fork positioner, cabin, heater, gas tank, lighting according to StVZO (German Road Traffic Licensing Regulations), 3 work lights at the front.

Condition: used, mileage: 770,700 km, power: 324 kW (440.52 HP), first registration: 06/2014, fuel type: diesel, empty load weight: 18,400 kg, maximum load weight: 7,600 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,500 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 6,200 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, Scania R440 6x2*4 flatbed truck with heavy-duty crane First registration: [date], 700 km with documentation Euro 5 emission class Highline cab Opticruise transmission Retarder Air conditioning, auxiliary air conditioning, auxiliary heater Trailer coupling 6x2*4 drive Leaf/air suspension 3rd axle steerable and liftable Tires 385/55 R22.5, tread depth approx. 60% Tires 315/60 R22.5, tread depth approx. 60% Wheelbase 4500mm Flatbed length 6200mm Loading height from ground to top edge of flatbed 1000mm Flatbed with container locking system Unladen weight 18,400 kg Crane: HMF 5020 K5 Radio remote control 5 hydraulic extensions 4.70m / 9510 kg 6.40m / 6670 kg Crsdoy S Sm Hopfx Adreh 8.30m / 4980 kg 10.30m / 3900 kg 12.30m / 3200 kg 14.40m / 2710 kg Hook height approx. 18.50 meters German vehicle, first owner, in well-maintained condition. Export/net price: 77,900 Euro All information without guarantee, errors and omissions excepted.

Year of construction: 2010, condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos Quantity: 1 piece available -Dimensions: 530/520/H1120 mm Crodpfx Asy R S Twjdrsh -Weight: 56 kg

Condition: good (used), Year of construction: 2006, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Manufacturer: Flott Type: BC 40 Super Credpfot H Rv Tex Adrjh Year of manufacture: 2006 Tool holder: BT 40 Motor: 7.5/5.5 kW Spindle speed: 50-8000 rpm X-axis travel: 700 mm Y-axis travel: 400 mm Z-axis travel: 400 mm

Condition: ready for operation (used), Year of construction: 2017, pressing force: 41 t, stroke length: 200 mm, overall weight: 4,000 kg, Press brake manufactured in 2017. This Bystronic Xpert 40/1030 features a press force of 400 kN and a bending length of 1030 mm. It includes a ByVision Bending control system and a 6-axis backgauge for enhanced precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 40/1030 machine we have for sale. Contact us for further details. • Control: ByVision Bending • Backgauge: 6-axis • Interface: OPC • Oil cooling system • Safety system: Fast Bend G2 • Electrical: 3-phase 400V / 50 Hz • Main motor power: 7.5 kW • Made in Germany • The PLC Runtime is 1812 hours • The Robot Runtime is 140 hours. Additional equipment • Bystronic Mobile Bending Robot (Integrated robotic bending cell) • Year of manufacture: 2017 • Electrical: 3-phase 400V / 50 Hz • Power consumption: 3 kW • Pneumatic pressure max: 8 bar • Weight: approx. 1000 kg LIST OF TOOLS Bystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=300 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=275 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=200 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=100 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=50 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=30 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=20 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=15 mmBystronic V10S/30° – 350 kN/m – R=1 mm – H=55 mm – L=10 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=275 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=200 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° Left Angle – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° Right Angle – 750 kN/m – R=1 mm – H=250 mm – L=100 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=50 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=30 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=20 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=15 mmBystronic P5RFA/30° – 750 kN/m – R=1 mm – H=250 mm – L=15 mm Technical Specification Bending Length 1030 mm Csdpfey Tw R Tex Adrorh

Condition: good (used), Year of construction: 2004, Universalfräsmaschine mit Streckensteuerung HEIDENHAIN TNC 124 mech. Handräder drehbarer Kipptisch +- 45°, hydr. Werkzeugspannung, Halbkabine Kühlmittelbehälter Handbuch Technische Details: x-Weg 600 mm y-Weg 400 mm z-Weg 400 mm Credpfxsigm Tco Adroh Spindeldrehanzahl 63 - 3.150 1/min Vorschub stufenlos 12-3000 / 6-1500 (Z) mm/min Pinolenhub 100 mm Kopf schwenkbar +/- 90° Spindelaufnahme ISO SK 40 Aufspannfläche 630 x 400 mm Gesamtleistungsbedarf 8 kW Maschinengewicht ca. 2,2 t Raumbedarf ca. 2 x 1,9 x 1,95

Condition: used, functionality: fully functional, Ferwood Code: RU0008247 - Manufacturer Code: 31C014-503-4-00 - Condition: Used - Functionality: Fully functional - Compatible Machine: CNC - LOADING UNLOADING IMA - BARGSTEDT - MEINERT - If interested we offer an overhaul service, contact us. Credpfxjv Hgfho Adreh

Condition: used, functionality: unexamined, Ferwood Code: RU0012069 - Manufacturer Code: MC07B0008-5A3-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - Weight: 3KG - Dimensions: 36X26X21 - If interested, we offer a refurbishment service, please contact us. Crjdpozd U Twofx Adreh

Condition: used, functionality: unexamined, Ferwood Code: RU0008193 - Manufacturer Code: MDX61B-0110-5A3-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - If interested, we offer an overhaul service, please contact us. Cjdjzmhxfepfx Adrerh

Condition: used, functionality: unexamined, Ferwood Code: RU0012132 - Manufacturer Code: 4-086-06-3073 - Condition: Used - Functionality: Not tested - Compatible Machine: HOMAG - If interested, we offer a refurbishment service, please contact us. Crjdpfezmhzgjx Adroh

Condition: new, Year of construction: 2025, Automatic multilane cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of lanes: 2; max. speed of the machine in neutral: 40 cycles/minute; power: 220V, 2.1kW; compressed air: 0,2m³, 6bar; machine dimensions: L3000xW850xH1600mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Crjdpfx Adov Nkynereh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.