Used Fehlmann Picomax 60 Hsc for sale (20,908)

Condition: used, coolant capacity / l/min Capacity / Watt conveying height / Immersion pump Iodpfxoy Sut Ne Adketg Type: MTH4-60/4 A-W-A-AUUV

Condition: new, Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Itedpfxegl Nlmo Adkeg Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Iedjv Rpxljpfx Adkjtg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for trade faire machine *available upon request New: With the frequency converter option, up to a maximum of 45% eligible for state funding Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 *Approved for indoor installation Itodpfxjd Su Hxe Adkjg *both individual machines manufactured and in stock, only need to be connected to each other 1. Technical Data Briquetting Press: Our best-selling briquetting press, the classic. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, development, and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Customs tariff number: 84793010 Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput rate (depending on material): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW, 400 Volt / 50 Hz / 3-phase, Footprint total system: 2.2x1.1x2.8 m LxWxH Height - 2.8 m (special container) Delivery possible in 2 components Weight: approx. 1200 kg, Oil volume: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Press tongs cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant 2. Technical Data Clean Air Extraction Unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction nozzle left (when standing in front of the dust bin) Residual dust:

Condition: ready for operation (used), Deutronic D-Top DX500-CAN-60 power supply Condition: 1 Serial number: 23001654, used, in good condition, 100% functional, scope of delivery as shown in the photos. Itsdey Srm Tepfx Adkeg

Condition: ready for operation (used), Deutronic D-Top DX500-CAN-60 power supply, condition: 1, serial number: 42991529, used, in good condition, fully functional, delivery as per photos. Isdpfxoy Srndo Adkjtg

Condition: ready for operation (used), Deutronic DX 3000 / 3-CAN-60-DIV built-in power supply Condition: 1 Serial number: 9122080017, used, in good condition, 100% functional, scope of delivery as shown in photos. Itodpfx Adjy Srnkjksg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, total length: 1,080 mm, total width: 680 mm, total height: 1,280 mm, tank capacity: 95 l, empty load weight: 350 kg, power: 4.87 kW (6.62 HP), electrical fuse: 20 A, New machine with a 24-month warranty. Advantages: + Robust construction + Boiler, central shaft, and spiral made of stainless steel + Drive system with two motors (spiral & boiler) + Mobile machine, on swivel wheels, with a fixed boiler Itedpfx Ashyc Tpedkog + Flour dust hood closes gently with dampers, with automatic shut-off + Dirt protection cover for the feet + Short kneading time with excellent results + Control panel with push buttons for easy operation, with 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + Up to 99 different mixing/kneading programs can be stored + Switch for manual or automatic operation + Fast spare parts supply within 1-2 working days Machine in stainless steel version: - Additional cost: + €2,370.00 net

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, clamping force: 250 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 39 cm³, injection weight: 36 g, mold height (min.): 200 mm, power: 10.2 kW (13.87 HP), Year of manufacture: 2003 Clamping force: 25 tons Distance between columns: 270 x 270 mm Screw diameter: 25 mm Injection volume: 39 cc Injection weight: 36 g for PS Equipment: Conveyor belt, sprue picker, core puller, Euromap Fully inspected! PRICE REDUCED FROM 6500 TO 5500 EUR!!! Iedpfx Aexgiaqodketg

Year of construction: 1987, condition: used, number of driven axis 1 guage width 1435 mm pulling force - max. 300 t motor Deutz power fuel Diesel The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Iodpfx Adjyt R Ausketg We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2014, Swivel-boom crane, boom crane with ZYBA-MAT Isdpfx Asgu Dkysdkotg Manufacturer: Strödter Type: ZP 60 / SAZ 60 D1 Year of manufacture: 2014 New and unused Load capacity, permissible load weight max.: 25 kg Working radius approx.: 3,000 mm Lifting height max.: 800 mm Lifting speed max.: approx. 800 mm/sec Power supply: pneumatic Mounting type: Swivel boom with support column Weight of device (with load handling device): 287 kg Pneumatic operating pressure: 6 bar Required air quality for max. load capacity: clean, dry and filtered (5 μm) Air consumption max.: approx. 17 Nl/double stroke ZYBA-MAT on the swivel boom Pneumatic balancing control with automatic scale 19526ä

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,800 h, load capacity: 4,000 kg, lifting height: 4,450 mm, free lift: 150 mm, fuel type: electric, mast type: other, construction height: 3,150 mm, battery capacity: 870 Ah, remaining battery capacity: 80 %, battery voltage: 80 V, DGUV certified until: 05/2027, fork length: 2,400 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 Electric Forklift with the following specifications: Lifting capacity: 4,000 kg Lift height: 4,450 mm Overall height: 3,150 mm Year of manufacture: 2010 Operating hours: 8,800 STILL 4.0 ton electric forklift with full cab and heater, battery 80%, good tires (new rear tires), telescopic free-view mast, sideshift, 4th valve, road-legal lighting (StVZO compliant), fork length 2,400 mm (other fork lengths available upon request), battery charger included. Itsdeyuaglspfx Adkjg Additional attachments such as fork positioner, rotator, etc. available on request. Price ex works, includes 1,000-hour service according to STILL manufacturer specifications and valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive possible by appointment. Sale exclusively to commercial customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift at a competitive rate with our own ramp low-loader (transport costs upon request). For more information and offers, please visit our newly redesigned website!

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN48357, functionality: fully functional, Chamber furnace with exhaust hood, fully refurbished, 12-month warranty, available for immediate delivery - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Supply and exhaust air with electrically actuated dampers (driven by Belimo actuators) - Supply air fan with frequency converter, controlled via regulator - Stainless steel exhaust hood - Bentrup 507 control system with thyristor control - Note: Controller language is German only; switching to other languages is not possible! - Additional drag element Type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current rating: 26 amperes - Supply voltage: 3/N/PE 400VAC - Connection type: prepared for fixed connection, 32 A plug - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Iodpfx Astbq Eqedketg Inspection by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, curing furnace, tempering furnace, laboratory furnace, hardening furnace, ceramic furnace

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 33 432, Two-spindle copy milling machine, Elumatec KF 78 / 60 used & fully functional For processing aluminum or steel profiles With vertical and horizontal milling motor, spray device and pneumatic clamping device Technical data (according to Elumatec): Profile height: 60 mm max Milling range, horizontal: 180 x 70 mm Milling range, vertical: 300 x 95 mm Stroke: 110 mm Drilling speed: 6000 rpm Milling speed: 12000 rpm Dimensions (H x W x D): 160 x 280 x 110 cm Itodpfx Adsy Sxr Nskog Weight approx. 260 kg

Condition: good (used), 1. DEMAG drum brake Type: TH806/60 - RT315 TH806 1 piece available. Itedpfx Adsu Uvmfjkeg 2. ELDRO electrohydraulic lifting device Ed 1250/60

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,813 kg, axle configuration: 3 axles, first registration: 11/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Itjdpfx Aoy R T I Nedkog Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 682 kg 3 axles Pallet rack for 36 Euro pallets

Condition: used, Year of construction: 2006, operating hours: 6,714 h, machine/vehicle number: Z8006-1004, lifting height: 26,000 mm, color: other, Equipment: all wheel drive, Power internal combustion engine: 73 HP (54 kW) GVW: 16.870 kg Engine type: Deutz Diesel Mast: articulated arm Lifting capacity: 227 kg Working height: 2.577 cm CE mark: yes = GENIE Z-80/60 ARTICULATED 4x4 DIESEL BOOM LIFT W/JIB – 2006 = - 4x4 four-wheel drive - Articulated boom lift - Included JIB - Working height: 2577 cm - Platform height: 2377 cm - Horizontal outreach: 1829 cm - Up/Over clearance: 883 cm - Platform rotator: 160° - Vertical JIB rotation: 130° - Basket capacity: 227 kg - Diesel Deutz engine - Turntable rotation: 360° continuous - Empty weight: 17.489 kg - Overall width: 249 cm - Stowed height: 300 cm - Stowed length: 1127 cm - Gradeability: 45° - Serial number: Z8006-1004 - Year of manufacturing: 2006 - Hours on meter: +/- 6714 hrs - CE Certified See more pictures and product video on our website. Price is excluding VAT. Visit our website for more photos and a product video. Listed price is excluding VAT. We are open Monday to Friday from 07:30 to 18:00. Closed during weekends. All specifications, dimensions, and weights are approximate and subject to change without prior notice. Itedpowixqyjfx Adkeg Please note: the indicated hours may increase slightly, as this machine is part of our active rental fleet. Errors and omissions excepted.

Condition: used, Year of construction: 2020, load capacity: 3,000 kg, lifting height: 4,970 mm, total length: 3,660 mm, - Geräteart Elektro - Bedienung Sitz - Tragfähigkeit 3,0t - Lastschwerpunkt 500 mm - Lastabstand 440 mm - Radstand 1650 mm - Achslast vorne mit Last 7290 mm - Achslast hinten mit Last 861 mm - Achslast vorne ohne Last 2581 mm - Achslast hinten ohne Last 2570 mm - Bereifung Superelastik - Spur vorne 950 mm - Spur hinten 900 mm - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 9 - Sitzhöhe/Standhöhe (SRP) mm 1141 - Kupplunghöhe 487/367 mm - Arbeitsgangbreite bei Palette 1000 x 1200 quer 3735 mm - Arbeitsgangbreite bei Palette 800 x 1200 längs 3935 mm - Wenderadius 2095 mm - kleinster Drehpunkt 570 mm - Fahrgeschwindigkeit mit Last km/h 19 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit mit Last m/s 0,40 - Hubgeschwindigkeit ohne Last m/s 0,55 - Senkgeschwindigkeit mit Last m/s 0,52 - Senkgeschwindigkeit ohne Last m/s 0,45 - Zugkraft mit Last 7680 N - Zugkraft ohne Last 8040 N - Max. Zugkraft mit Last 17050 N - Max. Zugkraft ohne Last 17240 N - Steigfähigkeit mit Last 18,1 % - Steigfähigkeit ohne Last 29 % - Max. Steigfähigkeit mit Last 21,7 % - Max. Steigfähigkeit ohne Last 29,0% - Beschleunigungszeit mit Last 4,7 % - Beschleunigungszeit ohne Last 4,2 % - Betriebsbremse elektr./mech. - Fahrmotor, Leistung KB 60 min kW 15 - Hubmotor, Leistung bei 15 % ED kW 16,3 - Batteriespannung V 80 - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min Ijdpfx Asy S Ep Iedkotg - Anhängekupplung, Art/Typ DIN Bolzen

Condition: good (used), functionality: fully functional, total width: 2,140 mm, total length: 7,061 mm, cutting length (max.): 6,000 mm, We are selling our fully functional Hegla EcoLam 60. It can be connected to any existing table. Suitable for jumbo cutting lengths up to 6000 mm. Technical data: Film thickness: 0.38 mm to 3.8 mm Itsdpjxqc U Aefx Adksg Maximum cutting height: 6 - 16 mm Max. glass size: Up to 6,000 mm Manufacturer: HEGLA Power connection values: 400V / 50Hz / 3-phase / 45A / N / PE / 19.0kW 6 bar / 3/4" The machine has already been disassembled but can be inspected at any time.

Condition: used, Year of construction: 2011, Overview This shrink-wrapper was manufactured in 2011 by the american company Hartness International. The Multi Packer is a versatile film packer designed for wrapping PET bottles, glass bottles, or cans into multiple packaging formats. Currently configured for PET bottles (1.5 L) and PET bottles (0,5L) in 2×(3×2) packs, the machine can easily be adjusted to handle other formats and pack configurations. It is in very good condition, part of a line, and immediately available. The machine offers a high level of flexibility with adjustable infeed guides. Technical data  year of manufacture: 2011 capacity 60/min  adjusted formats: 1,5L PET (2x(3x2)) and 0,5L PET  operation: film only  application: water, beer, CSD condition: very good, still connected  Additional information conveyor for packages available Itjdpfjy Sccrsx Adkog

Condition: good (used), axle configuration: 3 axles, first registration: 01/2018, total length: 12,800 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,790 mm, color: other, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - EBS - Light alloy wheels = Notes = Number of axles: 3, Payload: 32,450 kg, Unladen weight: 6,550 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Aluminium, Kingpin size: 2 inch, Light alloy wheels, Suspension type: Air suspension, ABS, EBS, Year of body construction: 2018, Drum volume: 60, Drum volume in: m3, Compartment division: 1 compartment, Type of load: Silo = More Information = General Information Cab: Day cab Registration number: OX-26-DZ Itodpjyhl H Rsfx Adksg Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 12 mm; Tyre tread right: 13 mm Axle 2: Tyre tread left: 14 mm; Tyre tread right: 13 mm Axle 3: Tyre tread left: 12 mm; Tyre tread right: 9 mm Weights Unladen weight: 6,550 kg Payload: 32,450 kg GVW: 39,000 kg Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 01.2027 Condition Technical condition: good Optical condition: good Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent traders of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our inventory covers all European brands, years of manufacture, and price ranges. Why buy at Kleyn Trucks? It’s simple! • Large, rapidly changing selection • Recognisable quality • Good pricing • Reliable business integrity • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Professional technical services • The assurance of “recognisable quality” • And more… Please visit our website for special offers and our full stock list: Leasing via Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and send an enquiry through our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2014, operating hours: 14,950 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Exclusive use in plastics processing – no heavy-duty machining, no steel, stainless steel, or titanium processing; resulting in reduced wear on the spindle, guides, ball screws, and rotary axes. Technical data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Loading capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Itsdjy Smm Uopfx Adkjg Tool holder: HSK-A63 Chip conveyor: not shown, but available. Operating hours: approx. 50,320 h Spindle hours: approx. 14,950 h

Year of construction: 2024, condition: new, SPECIAL ACTION: Folding press AD-S 1260 length/width/height: 2300mm/1550mm/2850mm Weight: 47000 kg Bending force: 60 tons bending length: 1250 mm Passage between stands: 1050 mm Stroke:160mm Installation height: 530 mm Throat: 450 mm table height: 900 mm table width: 104 mm Y High speed: 200 mm/sec. Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. lower tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motorized crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guidance along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Itjdpfx Aded R Dhpekog Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information upon request.

Year of construction: 2024, condition: new, Länge/Breite/Höhe: 3200mm/1550mm/2750mm Weight: 3550 kg Bending force: 60 tons Bending length: 2050 mm Passage between stands: 1700 mm stroke: 265mm Installation height: 530 mm Projection: 410 mm table height: 900 mm table width: 104 mm Y Fast speed: 200 mm/sec. Y Working speed: 10 mm/sec. Itodpfofgz U Sox Adkjg Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. bottom tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motor-driven crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guide along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: used, Year of construction: 2011, For sale: a Dugard 42 TT-60 lathe with a feed mechanism. Itodpoy S Ttnefx Adksg