Used Festo Dn-80-25-Ppv for sale (30,354)

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis Rjdpfx Aijx Suzaozot * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Immediately available from stock Redpfx Ajvxh Iusizet

Condition: used, Pressure gauge, flow meter, measurement and control technology, flow meter liquid -Manufacturer: SKT, flow meter for liquid / water Redpfx Aieir A R Tezst -Measuring range: 100 to 1000 l/h -Accuracy class: 4 -Connection: DN 25 -Pmax: 10 bars -Dimensions: 60/60/H390 mm -Weight: 0.8 kg

Condition: used, Pressure gauge, flow meter, measurement and control technology, liquid flow meter, lubricating oil flow meter Redjt N Acqopfx Aizst -Manufacturer: Turbo, flow meter for lubricating oil -Measuring range: 0 to 1.5 m³/h -Flange: Ø 115 mm / bolt circle Ø 85 x 14 mm -Connection: DN 25 -Dimensions: 160/115/H115mm -Weight: 6 kg

Condition: good (used), Fan head, chamber fan, Dorade fan, mushroom fan, ship fan, deck fan, ventilation, mushroom head hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered damper, backflow preventer, lamellar fan, mushroom head hood -Manufacturer: WMW, fan head type MTK DN 80 GL 37081-86 HH Rodsirf Enepfx Aizjt -Flange: DIN 2576 ND10-NW80/88 -Bolt circle Ø 160 x 18 mm -Quantity: 5x hood available -Price: per piece -Dimensions: 310/200/H290 mm -Weight: 12.2 kg/pc.

Condition: good (used), Heavy-duty castors, heavy-duty wheels, tires, heavy-duty double swivel castors, heavy-duty double fixed castors Rodpjwwrv Eofx Aizet -Manufacturer: Vogel /Baumann, heavy-duty castors 4 pieces from electric forklift EVS 25/14 -Rim: Vogel RV 5450 Tires: Ø 200 x 80 mm -Shipping/Price: complete -Dimensions each: Ø 200 x 165 mm -Weight: 9.4 kg/piece

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) Rodpfx Aoxabnyjizjt - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) - 2x emergency stop buttons at the front - Operating instructions

Condition: excellent (used), Year of construction: 1999, Technical data: Working length: 2550 mm Stand width: 2125 mm Rjdpfxjvrh Rce Aizjt Pressing force: 80 tons CNC control: AMADA OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back stop Stroke: 200 mm Thrust: 420 mm Crafter Working height: 960 mm Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 3000 x 2250 x 2250 mm Weight: approx. 6 tons Accessories: 1 set of AMADA standard tools Condition: The machine is in very good condition You can find more machines on our homepage. The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2005, operating hours: 50,888 h, functionality: fully functional, clamping force: 250 kN, screw diameter: 22 mm, displacement volume: 38 cm³, injection weight: 25 g, mold height (min.): 150 mm, opening stroke: 333 mm, plate width: 470 mm, plate height: 280 mm, installation height: 330 mm, Engel ES 80/25 HLV machine in good condition. The machine is connected to power and can be inspected at any time. Tie-bar-less (holmlos). Rsdpjx Ex I Dsfx Aizjt

Condition: excellent (used), Year of construction: 2003, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Rsdpfxoxgi Ete Aizot Typ: VICTORY 80/25 TECH Baujahr: 2003 Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Spritzteilgewicht 34 g/PS Steuerung: CC100 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: excellent (used), Year of construction: 2004, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2004 Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Rjdpfexg H Hbex Aizjt Spritzteilgewicht 34 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, pressing force: 80 t, table width: 60 mm, working width: 2,500 mm, TECHNICAL DETAILS Pressure: 80 t Bending length: 2,500 mm Table width: 60 mm Working height: 960 mm Dimensions and clearances Clearance between columns: 2,160 mm Clearance between press beams: 370 mm Thrust: 400 mm Weight Redpfx Aowmdf Dsizot Machine weight approx.: 5,000 kg

Condition: used, functionality: fully functional, Year of construction: 1992, load capacity: 8,000 kg, lifting height: 3,500 mm, fuel type: diesel, mast type: simplex, fork length: 2,500 mm, drive type: Diesel, Sideloader Mast type: Standard Technical condition: good Redpfx Aiou Aczuezjt

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball linear guide size 20 Payload: 60 kg Rjdew Uc T Iopfx Aizjt Maximum speed, ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current draw: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit mounted on welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear units 59702 + 59700

Condition: excellent (used), For sale: Professional fire-fighting pump METZ TS 8/8 manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The equipment is in very good visual and technical condition and comes from a fire brigade unit. The pump is powered by a Volkswagen type 122 engine with 25 kW output, renowned for its durability and ease of maintenance. A significant advantage is its low operating hours—approximately 66 hours, which is exceptionally low for equipment of this type. Technical specifications • Manufacturer: METZ Feuerwehrgeräte GmbH • Model: TS 8/8 • Standard: DIN 14410 • Year of manufacture: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump capacity: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment • Pressure and vacuum gauge Rodpfxjyt H R Ue Aizjt • Hour meter • Work lights • Firefighting quick couplings • Transport frame • Choke and throttle control Application • Volunteer and professional fire brigades • Water transfer from ponds, rivers, and wells • Agricultural operations • Fire-protection systems • Dewatering and water management duties Robust German engineering—very durable and easy to service.

Condition: new, The TCK800DY series features a 45° slant bed in one-piece high-strength cast iron, with finite element analysis to achieve optimal rib reinforcement layout. Made from high-strength cast iron by resin sand casting, followed by sufficient secondary and natural aging, the machine base components possess high rigidity and ensure long-term machine tool stability. Redpfxeyw Hvmo Aizjt

Condition: new, Pneumatic Cylinders / Cylinders: Redoyvwc Ijpfx Aizet 1. FESTO Type: DSBG - 160 - 735 - PPVA - 3 (new). Diameter: 160 x 735 2. Type: BOSCH / REXROTH - 4 units. 3. Type: BOSCH / REXROTH - 2 units.

Condition: new, For sale: Professional industrial pump from the renowned manufacturer KSB. The pump is in new condition (ex-stock/warehouse storage) – unused, with possible storage marks visible in the photos. ⚠️ Sale concerns the pump only – electric motor not included. ⚙️ TECHNICAL DATA Manufacturer: KSB Model: ETACHROM BC 80-250 / 1104 Year of manufacture: 2000 Rsdpfxoywcq Tj Aizjt Capacity: up to approx. 160 m³/h Head: approx. H-14 Type: centrifugal pump Construction: single-stage Connections: flanged Design: industrial, heavy-duty 🔧 APPLICATIONS Water installations Industry Process systems Cooling Liquid circuits ✅ CONDITION New – stock item Unused Fully operational construction No motor included 📦 ADDITIONAL INFORMATION ➡️ Option to purchase an electric motor ➡️ Matching motor available – additional cost: €700

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO Type PAS43SBG1800 / BMH1002T07F2A Year of manufacture 2012 Vertical stroke via linear axis Schneider Electric PAS43SBG1800 Travel distance 1800 mm Travel distance per revolution 20 mm Maximum speed 1 m/s Drive element Ball screw drive Guide type Recirculating ball bearing guide size 20 Payload 60 kg Maximum speed ball screw 3000 rpm Motor type Schneider Electric BMH1002T07F2A Rated voltage 240 Vrms Rated power 1.912 kW Rated speed 3500 rpm Current consumption max. 29.4 A Horizontal travel 670 mm via Festo pneumatic cylinder Gripper opening 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper opens pneumatically - Unit is mounted on welded square tube frame Total weight approx. 380 kg Overall dimensions W x H x D 1280 x 2950 x 1150 mm Very good condition Rsdpfx Aisgf Ix Aszjt Almost identical linear unit under stock number 59702

Condition: good (used), Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, shock absorber type DYSW-12-20-Y1F 548075 -Stroke travel: 20 mm -Number: 16 dampers available -Price: per piece -Dimensions: Ø 16 x 112 mm Rjdpox Tq Raefx Aizjt -Weight: 0.1 kg/pc.

Condition: excellent (used), Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve Rsdpfx Aiox Ryhiozot -Manufacturer: Festo, Maintenance unit filter control valve -Type: MS9-LFR-3/4-D7-EUM-AG-BAR-AS 562531 -Quantity: 1x filter control valve available -Dimensions: 440/115/H205 mm -Weight: 3 kg

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGST-16-125- -Stroke: 125 mm -Shafts: Ø 6 mm -Number: 2 sleds available -Price: per piece -Dimensions: 210/85/H40 mm Rodoxwvh Aepfx Aizet -Weight: 1.4 kg/pc.

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo Rodpsdkzvtefx Aizet -Type: DC-100-0500PPV -Piston: Ø 100 mm -Stroke: 500 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Quantity: 1 available -Price: per piece -Dimensions: 138/H695 mm -Weight: 12.15 kg

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-12-50-Y3A 543979 -Stroke: 50 mm -Number: 15 sleds available -Price: per piece -Dimensions: 185/60/H45 mm -Weight: 0.9 kg/pc. Rjdpfoxw Tc Rox Aizst

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Festo, standard cylinder type DSNU-32-125-PPS-A with proximity switch -Stroke distance: 75 mm -Piston: Ø 32 mm -Piston rod: Ø 10 mm / M 10 x 1.25 -Proximity switch: 2 pieces, see photos Redeqv Hqgopfx Aizot -Quantity: 4x cylinders available -Price per piece -Dimension: 200/40/H60 mm -Weight: 0.4 kg/pc.