Used Fieldbus Gateway for sale (155)

Condition: used, mileage: 1,002,852 km, power: 345 kW (469.07 HP), first registration: 04/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2026, color: silver, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Equipment and technical details of the FH 460 4x2 tractor unit General: * Variant: MA-BAS (Basic market adaptation) * Description: FH 4x2 tractor unit * Wheelbase: 3,700 mm * Gross combination weight (technical): 44 t * Engine: D13K460, diesel engine, 12.8 l displacement, 469 HP/345 kW, 2,346 Nm * Emissions: Euro 6 with SCR, particulate filter, and EGR * Chassis height: High (CHH-HIGH) * Overall vehicle height: Max. 4.0 m * Rear axle load (technical): Max. 13 t * Front axle load (technical): Max. 7.5 t * Drive axle ratio: 2.79 : 1 * Drive axle: RSS1356, single reduction, GAW 56 t * Differential lock: Rear axle * Wheels: Steel rims, 9.00-22.5 on front and drive axles Cab: * Cab: FH Globetrotter High Sleeper Cab (HSLP) * Cabin height: 215 cm * Cabin length: 205 cm * Interior trim: Fabric, grey * Driver comfort: Luxury seat, air-sprung, heated, electrically adjustable (3-memory) * Passenger seat: Standard, unsprung * Bunk: Lower bunk, foldable, 2000x815/740/660 mm with safety net * Storage: Compartments above bunk (245 l), storage under bunk * Air conditioning: Automatic climate control with sun sensor * Auxiliary heater: Cab, 2 kW * Sun visor: Interior (manual roller blind) and exterior * Windows: Tinted glass, electric windows (driver's side with automatic up/down) * Mirrors: Heated and electrically adjustable rearview mirrors, wide-angle mirrors both sides, front mirror, vanity/shaving mirror * Extras: 33 l refrigerator with freezer compartment, foldable and height-adjustable table at lower bunk, safety vest, two warning triangles, Jericho horn/air horn (single, front-mounted), steering wheel writing pad Electrics, lighting, and instruments: * Lighting: LED daytime running lights ("V-lighting"), LED front fog lights, LED rear lights, brake lights with emergency brake flashing * Instruments: Medium, with driver's information color display (4"), battery indicator in display, gearbox oil temperature gauge * Audio: Radio with CD player, MP3 function, Bluetooth, USB port, AUX line-in, 8 speakers, tweeters in dashboard * Telematics: Telematics gateway with 3G and WLAN * Miscellaneous: Smoke detector, prepared for OBU (toll device, Toll Collect), auxiliary heater control, central locking with remote control, pre-wiring for phone Fpedeyxvd Nepfx Akhek Drivetrain: * Gearbox: Volvo I-Shift, automated 12-speed gearbox (AT2612E), operated via driver's seat control panel * PTO: PTR-DM (medium speed), gearbox mounted, max. output 600 Nm * Engine brake: Volvo Engine Brake+ (VEB+), ADR-compliant brake regulations * Turbo: Heavy-duty design, single stage * Fuel tank: 570 l aluminum tank right side, D-shape, 710 mm high * AdBlue tank: Usable volume 90 liters, mounted left side Brakes: * Brakes: Volvo disc brakes, electronically controlled, with TCS * EBS: Electronic Brake System, medium package * Retarder: Compact, gearbox-mounted retarder, 450 kW braking performance * ABS: Equipped * Air compressor: 2-cylinder, 900 l/min * Air tanks: Steel Axle suspension and steering: * Front axle: Conventional front suspension, parabolic springs (2-leaf, standard stiffness) * Rear axle: Air suspension, 4 air bellows * Steering: Single-circuit power steering, steering wheel adjustable in height and tilt, leather steering wheel, 450 mm diameter Frame, suspension, and wheels: * Frame: Frame thickness 6.5 mm, frame profile height 266 mm, frame length 10,500 mm * Underrun protection: Front fitted, rear not fitted * Fifth wheel coupling: [Text ends here]

Condition: new, Bihl + Wiedemann BWU3683 AS-i 3.0 CIP Safety over EtherNet/IP + Modbus TCP Gateway SN, unused with storage marks, 100% functional, scope of delivery as per photos. Fpedsx Eqwkspfx Akhsk

Condition: new, Bihl + Wiedemann BWU3683 AS-i 3.0 CIP Safety over EtherNet/IP + Modbus TCP gateway SN, unused with storage marks, 100% functional, scope of delivery as per photos Fedpsx Eqwqofx Akhopk

Condition: new, Bihl + Wiedemann BWU3683 AS-i 3.0 CIP Safety over EtherNet/IP + Modbus TCP Gateway SN, unused with storage marks, 100% functional, delivery as shown in photos. Fpsdpfox Eqwwex Akhok

Condition: new, Manufacturer: Balluff Condition: New, packaging only opened for the purpose of taking photos Type: PROFIBUS I/O module Model: BNIPBS-302-000-Z001 Order number: BNI000A Communication interface: PROFIBUS DP Digital inputs: 16 Digital outputs: 16 Sensor/actuator connection: M12 Protection rating: IP67 Fpodpfxszcw Ebs Akhsk Design: Fieldbus module for decentralized installation Application area: Industrial automation technology Mounting type: Machine and system mounting Quantity available: 6 units

Condition: used, Year of construction: 2009, operating hours: 10,000 h, functionality: fully functional, The FANUC M-10iA is a compact and versatile 6-axis industrial robot, ideally suited for high-speed handling, assembly, and machine loading applications. Paired with the proven R-30iA controller, this system delivers a reliable and high-performance automation solution for a wide range of production environments. With a payload capacity of up to 10 kg and a reach of 1,420 mm, the standard M-10iA covers a broad spectrum of applications. Its slim design and low weight allow for flexible integration—even in confined spaces. The high axis speed enables short cycle times, significantly boosting productivity. Fodpfx Ajy H Ekuskhopk The repeatability is ±0.08 mm, ensuring precise and reproducible results, even in demanding applications. The R-30iA controller stands out with its rugged industrial design, high process reliability, and extensive expansion options. It supports numerous fieldbus and communication interfaces, allowing for seamless integration into existing production systems. Technical highlights: - Payload: 10 kg - Reach: 1,420 mm - 6 axes - Repeatability: ±0.08 mm - Compact design - R-30iA controller with comprehensive integration capabilities The FANUC M-10iA is the ideal solution for companies seeking a flexible, fast, and reliable automation system. Especially suited for handling, assembly, packaging, machine loading and unloading, and general production tasks. If interested, we are happy to provide further technical details or prepare a customized quotation.

Condition: used, Year of construction: 2013, operating hours: 18,698 h, functionality: fully functional, overall weight: 1,010 kg, load capacity: 150 kg, arm reach: 2,200 mm, ABB industrial robot with IRB 6620-150/2.2 manipulator and IRC5 M2004 controller for industrial automation applications. The unit has been tested and is in working order. Typical applications include handling, assembly, machining, and general automation. The payload is 150 kg with a reach of 2200 mm. Manufactured in 2013, it has 18,698 operating hours and RobotWare software version 5.15.2005.02. It is equipped with an interconnect cable set, two additional cables, a FlexPendant programming device, an RW Control Module Key, and the following options: DeviceNet Lean, ProfiNet Fieldbus Adapter, and Path Recovery. Fpsdpfx Ajzdahnekhsk

Condition: good (used), Year of construction: 2017, operating hours: 50,000 h, functionality: fully functional, arm reach: 600 mm, Stäubli TS60 SCARA Robot – Wall Mount, incl. Base Frame, CS8C Controller, PROFINET Description: Used Stäubli TS60 SCARA robot in wall-mount configuration, including base frame/mounting support. Fully serviced – complete oil change and cleaning carried out. Supplied with Stäubli CS8C controller and PROFINET card. Ready for operation. Technical data: Model: Stäubli TS60 (4-axis SCARA) Mounting: wall mount, incl. base frame Controller: Stäubli CS8C Fieldbus: PROFINET card Payload: 2–8 kg Z-stroke: 200 mm Operating hours: approx. 50,000 h Connection cable: 5 m Fsdpfszcwx Ujx Akhepk Condition: serviced (oil change + cleaning done)

Condition: used, mileage: 320,000 km, power: 353 kW (479.95 HP), first registration: 09/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2024, color: white, gearing type: automatic, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Sleeper Cab Roof spoiler, side fenders, side paneling 2 sleeper berths Air-sprung cab suspension Electrically adjustable, heated exterior mirrors Wheelbase: 3,800 mm Transmission Optidriver AT2612F 12-speed automatic transmission Optibrake+ (reinforced engine brake) Power take-off Alloy wheels VA: 385/55 HA: 315/70 Integrated differential lock HA ratio: 2.31 Front axle 7.5 t Rear axle 13 t, air suspension Anti-lock braking system (ABS) Traction control system (ASR) Hill start aid Stability control and anti-tipper (ESC) Emergency brake assistant Emergency brake light Automatic parking brake (EPB) Sun visor Air-sprung driver's seat, adjustable lumbar support, adjustable seat cushion extension, seat heating, seat ventilation, two armrests Passenger seat with air suspension 24 l refrigerator under couch Auxiliary heater 2 kW Electronically controlled air conditioning Navigation system (TomTom) Radio reception: FM/DAB+ Interface for fleet management FMS Gateway 3.0 Adaptive cruise control (ACC) and advanced emergency braking system (AEBS) LED tail lights Jost JSK42C fifth wheel coupling Light and rain sensor Static cornering light Halogen main headlights 405 L aluminum tank, right 650 L aluminum tank, left 100 L AdBlue tank, right Air connection with hose and gun Fpjdjtxfy Ejpfx Akhsk Subject to errors, alterations and prior sale.

Condition: used, mileage: 250,000 km, power: 360 kW (489.46 HP), first registration: 01/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2025, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Sleeper Cab Roof spoiler, side fenders, side paneling 2 sleeper berths Air-sprung cab suspension Electrically adjustable, heated exterior mirrors Wheelbase: 3,800 mm Optidriver AT2612 12-speed automatic transmission Optibrake+ (reinforced engine brake) Power take-off on the transmission side Air compressor 1,100 l/min Steel rims VA: 385/65 Fjdpfx Aketxfw Dohepk HA: 315/70 Integrated differential lock HA ratio: 2.47 : 1 Front axle: 8.0 t, 2-leaf parabolic suspension Rear axle: 13 t, air suspension Anti-lock braking system (ABS) Traction control system (ASR) Hill start aid Stability control and anti-tipper (ESC) Emergency Brake Assist (AFU) Emergency brake light (EBL) Automatic parking brake (EPB) Adaptive cruise control (ACC) and advanced emergency braking system (AEBS) ECO cruise control with Optiroll Warning tone for reverse gear engaged Sun visor Luxury driver's seat Swivel passenger seat 24 l refrigerator under the couch Multimedia color touchscreen 7? Pre-installation for camera 24 V socket in the roof console Electrically adjustable roof hatch Compressed air gun in the cab Leather steering wheel Keyless start button Auxiliary heater 2 kW Electronically controlled air conditioning Navigation system (TomTom) FM radio reception, DAB+ Interface for fleet management FMS Gateway 3.0 LED main headlights LED daytime running lights Static bend lighting LED rear lighting and rear indicators Windshield wipers with rain sensor and automatic headlight control 405 L aluminum tank right 650 L aluminum tank left 112 L AdBlue tank right Jost JSK42C fifth-wheel coupling Errors, changes and prior sale reserved!

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, ITEC & Bobet Hygiene Gateways – Components – Custom Configurations Available from Stock. Complete solutions without the costs and long lead times of new equipment. HUVANTIS exclusively offers premium, tested hygiene infrastructure from stock clearance by industry leaders ITEC and Bobet Matériel. Why HUVANTIS? Significant Savings: A single ITEC turnstile with disinfection system currently sells for over €8,000 (new price). We offer complete systems at a fraction of this price. Immediately Available: No months-long delivery times. Available directly from stock in Büllingen (BE) / Auw (DE). Planning Included: We don’t just supply hardware. We also offer CAD-based planning for your hygiene passage (personnel flow analysis, black/white zone separation). Fpedpey N T Rhofx Akhok CURRENTLY AVAILABLE CONFIGURATIONS: 1. Modular ITEC System (Configuration 1): ITEC continuous sole cleaner with turnstile Separate ITEC hand disinfection station with rotary gate ITEC touchless hand wash basin, soap dispenser & hand dryer Stainless steel guidance system (barriers & guides) Price: €3,150 net (plus VAT) 2. Compact Bobet Combo System (Configuration 2): Bobet continuous sole cleaner with integrated disinfection & turnstile ITEC hand wash basin (2 touchless taps) ITEC soap dispenser & hand dryer Stainless steel guidance system Price: €2,850 net (plus VAT) ADDITIONAL SERVICE: Custom CAD planning & consultation for your site: €800 flat fee. LOGISTICS & TERMS: Location: B-4760 Büllingen (BE) / D-54597 Auw (DE) Shipping: Europe-wide delivery by freight forwarding available on request Invoice: Official invoice with separate VAT (BE-VAT) Condition: Used, technically inspected, sold “as is” A detailed 4-page dossier with technical drawings and a list of individual components is immediately available as a PDF upon request.

Condition: new, Core Drive Specifications NXI: NX Inverter Unit. It is designed to be fed by a shared, common DC bus arrangement rather than direct AC mains input. 0072: 72 Amps Nominal Current Rating.Low Overload (Pumps/Fans): Continuous maximum output of 72 A. High Overload (Heavy Duty): Continuous maximum output of 61 A. 5: Mains Voltage Class. Rated for 380 V to 500 V AC grid systems (which corresponds to a DC bus voltage range of 465 V to 800 V DC). A: Includes the Standard Alpha-numeric Control Keypad. 5: IP54 (NEMA 12) Enclosure Class. This offers strong, dust-protected, splash-resistant defense for hash operational environments. T: Standard EMC Emission Level adhering to the IEC61800-3 specification for IT networks. 0: No integrated brake chopper. C: Physical frame generation / module sizing designated as Frame FR7. Internal Hardware & Control Boards (SVA1AF00000) The suffix code segment details the exact internal logic, system software, and factory expansion board routing layout: S: Air-cooled design system. V: Internal coating option. It features varnished/coated circuit boards for moisture and corrosive air resilience. A: Standard Vacon System Interface architecture setup. 1AF00000: This sequence identifies the specific hardware configuration across the control expansion slots (A, B, C, D, and E):A1: OPT-A1 Basic I/O Board installed in Slot A. It provides 6 digital inputs, 1 digital output, 2 analog inputs, 1 analog output, +10V reference voltage, and a +24V auxiliary supply. AF: OPT-AF Dual Relay Output Board installed in Slot B. It provides 2 programmable changeover relay outputs (NO/NC configuration). 00000: Slots C, D, and E are left empty from the factory, giving you expansion headroom for fieldbus communications (such as Profinet or EtherCAT) if needed Fjdjy Ud Afspfx Akhepk Brand new never used. Please check out our other listings as well.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. Fpedoyug R Rjpfx Akhek The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". Fpjdpfx Akeyug Hxshek The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 8,000 mm, workpiece height (max.): 30 mm, workpiece weight (max.): 150 kg, TECHNICAL DETAILS Maximum plate length: 2,500 mm Maximum plate width: 8,000 mm Maximum plate thickness: 30 mm Maximum weight: 150 kg MACHINE DETAILS Tilting station transfer height: 680 mm Fsdpfx Aksy Nbcxohspk Belt conveyor with lifting function for discharge: 40 mm Belt conveyor with lifting function for transfer to roller conveyor: 265 mm Roller conveyor and belt conveyor transfer height: 920 mm Conveying direction Lengthwise on roller conveyors Crosswise on toothed belt conveyors Electrical Data Operating voltage: 400 V +N +PE - 50 Hz Control voltage: 24 V DC Brake voltage: 230 V AC Drive Technology Manufacturer: SEW Protection class: IP54 Quick-connect plug and hybrid cable on SEW fieldbus modules EQUIPMENT Sensors: Leuze Metalwork

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. Fpedpjfg E Hyefx Akhjk - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: H18/X2090/202/00162, load capacity: 14 kg, arm reach: 1,000 mm, repeat accuracy: 0.03 mm, TECHNICAL DETAILS Load capacity: 14 kg Arm reach: 1,000 mm Repeatability: 0.03 mm Maximum rotation angle: 350° Maximum rotational speed: 16.8°/s Maximum linear speed: 0.6 m/s Platform positioning accuracy: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (without robot arm, W x D x H): 890 x 1,120 x 1,000 mm Total weight: 730 kg Power supply: 1 x 230 V / 16 A Fedpsyzyxcefx Akhspk Battery capacity: 5.8 – 8.7 kWh Number of laser scanners: 3 Scan plane height: 150 mm Compressed air tank: 0.75 l / 7 bar Wrist protection rating: IP67 Arm protection rating: IP65 System protection rating: IP20 Average floor surface pressure max.: 10 N/mm² Drive type: Differential drive EQUIPMENT Tool parking station: 4 tools per station Tool changing system: MPS032 Navigation: based on laser scanner data Interfaces: WLAN, LAN, fieldbus Multi-coupling: compressed air, power supply, 2x Cat5e, 26 x 1 mm contacts Optical and acoustic signals: 4 LED units, storage for up to 16 audio files

Condition: new, Year of construction: 2024, Morbidelli M200 CNC CONTROLLED MACHINING CENTER - C.E. Safety instructions - Morbidelli m200 3715x1620 Z250 - Volt 400 EU - Frequency 50 Hz - PRO-SPACE safety devices - Plate passage Y 2200 mm - Retractable safety belts - "TECPAD wired" remote control with 7" touchscreen monitor - Tool changer TRB14 (version Y=1620) - Tool changer FAST14 - 1 vacuum pump, output 250/300 m³/h at 50/60 Hz - Central optimized suction nozzle on rear drilling head - Drilling unit with pneumatic vertical positioning (single Z-axis) - RO.AX F31LTC drilling unit - Suction hood for drilling unit - Drilling unit with inverter - Pressure booster - 5-axis unit "Prisma 5" version "KT" - Suction hood for 5-axis electrospindle - 7-position extraction hood for 5-axis electrospindle - Device for liquid cooling (air type) - 6 "TV FLEXMATIC" work tables 1600 - Conveyor belt for chip and remnant removal for X=3710mm - Removable chip collection container at the end of the machine frame - Sensor for reading the tool length - 4 devices for loading aid H=75 1600 - Front stops H=75 for 6 supports - 12 x fixed suction cups 145x145 H=75 mm - 6 x rotary suction cups 145x55 H=75 mm - Preparation for clamping cylinder for 6 supports TV FLEX / TV FLEXDRIVE / TV FLEXMATIC - Maestro connect: service contract for 1 year (kit gateway "plug&play" included) - SCM DIGITAL SOLUTIONS: MAESTRO CONNECT - Human-machine interface software (HMI) MAESTRO ACTIVE - Machine user interface software Maestro lab - Hardware key for Maestro - Additional hardware key for Maestro (for USB slot) - Mobile operating console "eye-M TOP" - TELESOLVE remote maintenance via the Internet - Mobile control unit with 6.5 m cable length - S-N-D 3-position selector switch - MACHINE LANGUAGE: German - incl. delivery, 3 days training in advance, 1 week installation and training Fpjdpfju Illmox Akhek - New machine is still in original packaging

Condition: used, Eagle Pro Pack 240 PRO – Advanced X-Ray Inspection for Packaged Products The Eagle Pro Pack 240 PRO is a high-performance X-ray inspection system designed for maximum product safety, quality assurance, and production efficiency. Ideal for food, pet food, pharmaceutical, and consumer goods applications, this system combines cutting-edge detection technology with robust industrial design. ----- Key Features & Benefits - Reliable detection of foreign contaminants, even in dense or metallized packaging - Multiple quality checks in a single inspection - High inspection accuracy at high production speeds - Hygienic, stainless-steel construction for demanding production environments Technical Specifications Inspection Area - Maximum inspection width: up to 242 mm - Maximum inspection height: up to 101 mm - Conveyor width: approximately 298 mm Detection Capabilities - Detection of metal, glass, stone, mineral bone, and dense plastics - Product integrity checks: - Missing or broken items - Shape and position verification - Fill level and mass/weight control (2-, 3- or 5-zone analysis) X-Ray Technology - Detector resolution: - Up to 0.4 mm (PXT™ dual-energy) - 1.2 mm single-energy Software & Controls - 15” full-color touchscreen HMI - Eagle SimulTask™ PRO image processing software - Windows 10 Enterprise operating system - Remote diagnostics via TeamViewer™ Conveyor & Speed - Variable belt speed: 17 – 114 m/min, depending on configuration and product Connectivity - USB 2.0 - Ethernet 10/100/1000 - Optional EtherNet/IP Fieldbus integration Construction & Safety - Hygienic stainless-steel design (IP65/IP66 optional) - Low radiation emission: < 1 µSv/h - Compliant with international X-ray and electrical safety standards (CE / FDA) Fedex Srn Rspfx Akhopk Operating Conditions - Operating temperature: 0 – 40 °C - Power supply: 230 V AC, 50/60 Hz, single phase Why Choose the Eagle Pro Pack 240 PRO? - Superior detection performance - Increased production uptime - Reduced false rejects - Designed for modern, high-speed production lines

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: AA100001570, functionality: fully functional, travel distance Z-axis: 180 mm, table length: 5,510 mm, table width: 1,620 mm, rapid traverse X-axis: 56 m/min, rapid traverse Y-axis: 56 m/min, TECHNICAL DETAILS Processing table dimensions (L x W): 5,510 x 1,620 mm Z-axis travel distance: 180 mm Maximum vectorial rapid traverse speed X/Y-axis: 56 m/min Spindle unit speed: 4,000 rpm Tool changer slots: 44 Connection diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions: 9,700 x 5,020 x 2,650 mm (LxWxH) Net weight: 5,000 kg Spindle unit motor power: 5.5 kW Fpsdpfoxmgr Rox Akhek Air consumption: 4,430 m³/h Air velocity: 25 m/s Voltage: 400 V / 50 Hz EQUIPMENT PRO-Speed safety system TEPCAD control panel with touchscreen color display Linear tool changer TBR14 Linear tool changer FAST14 Air blower on the electrospindle XY-axis safety guard Vacuum pump 150/300 m³/h 5-axis unit ‘JQX’ version 13.5 kW Fixed pedestal: 145 x 145 H=75 mm Rotatable gondola: 145 x 55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect 1 year (including Gateway Kit plug & play) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for human-machine interface (HMI) Maestro software for CNC programming Hardware key for Maestro CNC Advanced Maestro 3D module Additional key for Maestro CNC (USB connection) Windows 10 embedded 64-bit operating system Console with integrated PC eye-M PRO

Condition: excellent (used), Logopak 920 II PF Pallet Labeler Manufacturer: Logopak Pallet Labeler Model: 920 II PF Your Benefits at a Glance Top speed (up to 240 pallets/hour) Fewer roll changes Maximum flexibility Robust design (protective housing) Intuitive operation via touchscreen Quick-change print engine system Direct thermal or thermal transfer printing for labels up to A3 Internal database, error diagnostics, and many other features Operates as a stand-alone solution or integrated into a network VLP 210 II F Label Printing System The Logopak VLP 210 is an intelligent label printing system for barcode product labeling. The robust mechanical design of the 10 mm thick cast aluminum housing with solid steel hinge plates was specially developed for continuous operation in harsh industrial environments. The printer can be controlled either externally via a serial interface or operated as a standalone device thanks to its integrated intelligence. SPECIFICATIONS Print speed: 150 mm/s Core diameter: 50 mm/76 mm Label roll diameter: 180 mm Font size: 2 mm–50 mm Print direction: Rotatable 90°, 180°, and 270° Barcode types: Codabar, Code39, Code128, CodeMatrix EAN13, EAN8, EAN-128, Lata 2/5, Industrial 2/5, Interleave 2/5, ITF-14, Maxicode, PDF417, QR, UPC-A Interface: V.24 or 20 mA, network-capable Memory (RAM): 1 MB battery-backed CMOS memory, expandable to 8 MB Ambient temperature: 5°C to 40°C Fedpfx Akjw U Tc Tehepk Dimensions (W x L x H): 700 mm x 500 mm x 400 mm mm Weight: approx. 50 kg Housing: Painted steel Integrated intelligence: IP54 control unit with Power Leap II® processing power • User-friendly interface with color LCD display and touchscreen • Multilingual user interface (standard) • Internal item database and error logging (standard) • Remote maintenance for software updates (optional) • 10 standard fonts, 4 scalable • Dual 64-bit RISC processors, 150 MHz clock • RS 422 and 20 mA, Ethernet connection also available (10/100 Mbit) • Industrial fieldbus for I/O control (CAN bus) with flexible programming using a high-level PLC language • Up to 200 digital I/Os for process control without loss of efficiency Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2009, condition: ready for operation (used), An empty bottle inspection machine Heuft including a pre-sorting unit Heuft Spectrum SX TB 72 and Gateway II is available. Inspector: rated throughput: 72000bottles/h, bottle types: Ale/NRW/Euro/Krombacher swing top/swing top, bottle colors: green/brown/clear, closure types: crown cap/screw cap/embossing, bottle volume: 330ml/500ml, pre-sorting: bottle type/bottle height, inspection types: sidewall/finish/thread/base/residual liquid/labels/test bottles. Including defective bottle reject systems and infeed and outfeed conveyor. Documentation available. An on-site inspection is possible. Fjdpjyrg Idofx Akhspk

Condition: used, Year of construction: 2015, operating hours: 11,000 h, functionality: fully functional, overall weight: 1,010 kg, arm reach: 3,500 mm, pivoting range: 360 °, Equipment: documentation/manual, Yaskawa Grinding / Finishing Cell Equipped with multiple grinding heads and fixtures for various profile types. The cell includes several grinding machines as well as conveyor systems and additional material handling equipment for efficient workflow integration. Yaskawa Motoman MH180 Model: MOTOMAN MH180 (6-axis articulated industrial robot) Fsdpfx Akjx Tvdrehjpk Manufacturer: Yaskawa Motoman Controller: DX200 Payload Capacity Maximum payload: 180 kg Reach Horizontal reach: 2,702 mm Vertical reach: approx. 3,393 mm Axes 6 axes Repeatability ±0.2 mm (typical) Weight Robot arm: approx. 970 kg Mounting Floor-mounted 📈 Motion / Performance Axis Max speed (deg/sec) J1 125 J2 115 J3 125 J4 182 J5 175 J6 265 Motion Ranges J1: ±180° J2: +76° / −60° J3: +90° / −147° J4: ±360° J5: +130° / −125° J6: ±360° 🔧 Features & Design - Compact base footprint and narrow interference radius for space-saving installation - Pre-wired for servo grippers and end-of-arm tooling (EOAT) - Wrist rated to IP67; robot body typically IP54 - High-rigidity speed reducers and vibration control for precise, high-speed operation 📌 Notes Different variants are available (e.g., MH180-120) offering extended reach with reduced payload—please confirm the exact model designation. Controller configuration and DX200 software options impact fieldbus interfaces, safety features, additional axis control, and coordinated motion functions.

Condition: used, Year of construction: 2018, functionality: fully functional, overall weight: 61 kg, load capacity: 10 kg, arm reach: 850 mm, pivoting range: 360 °, controller manufacturer: Seiko Epson Corporation, controller model: RC700-A, teach pendant manufacturer: Seiko Epson Corporation, control cabinet width: 430 mm, control cabinet height: 200 mm, input voltage: 240 V, type of input current: AC, repeat accuracy: 0.025 mm, Robot cell consists of: SCARA Robot G10-854SR (10 kg class, 850 mm reach) Controller RC700-A (200–240 V, 2.5 kVA) Teach Pendant TP3 (24 V DC) Fsdpfx Aeyka Dpskhspk Electrical supply in total Main supply: 200–240 V AC Teach pendant supply: 24 V DC Maximum controller power: 2.5 kVA Typical industrial applications - Assembly of heavy components - Packaging & palletizing - Loading and unloading - Multi-gripper handling EPSON SCARA G10-854SR Manufacturer: Seiko Epson Corporation (Japan) Model: G10-854SR Design: 4-axis SCARA, externally-mounted horizontal articulated arm Year of manufacture: 05/2018 Serial number: GA1013262 Net weight: 48 kg Payload (nominal/max): 5 / 10 kg Reach: 850 mm (450 + 400 mm) Z-stroke: 420 mm (standard) / 390 mm (cleanroom/IP) Repeatability (J1+J2 / J3 / J4): ±0.025 mm / ±0.010 mm / ±0.005° Continuous pressing force: 250 N Motor power (A1 / A2 / A3 / A4): 750 W / 600 W / 400 W / 150 W Protection class: IP20 / IP54 / IP65 / ISO3 & ESD Mounting options: floor / ceiling / wall Certification: CE EPSON RC700-A Controller Manufacturer: Epson Model: RC700-A Year of manufacture: 04/2018 Serial number: R7GL017210 Supply: AC 200–240 V, 50/60 Hz, 1 phase Power consumption: 2500 VA max Weight: 12 kg Multitasking: up to 48 tasks Functions: conveyor tracking / Vision Guide 7.0 / multi-robot operation Interfaces: fieldbus systems / extension modules Compatible Teach Pendant: TP3 Certification: CE EPSON TP3 Teach Pendant Manufacturer: Epson Model: TP3 Serial number: LC05TESE05 Date of manufacture: 01.12.2021 Supply: DC 24 V Current consumption: 0.7 A Display: HD-capable Integration: fully integrated with RC700-A Application areas: programming / diagnostics / maintenance / visualization Certifications: CE / EAC / KC Origin: Made in China

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Fsdpfx Aksfg E Hzehopk Real-time control of all cutting parameters