Used Firmware Firmware Module for sale (4,425)

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C Pgsdpfxovhctwe Adxjr - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: good (used), META CLIP shelving units, height 2,000 or 2,500 mm – Workshop racks, storage racks, manual storage, boltless shelving, small parts storage Uprights: * Open or closed side panel * 2,000 or 2,500mm high * 2000x300, 2500x400, 2500x500, 2500x600, 2500x800 mm Shelves (from €8 each): * 1,300 mm x 300 mm x 40 mm Psdpovtt Atjfx Adxjgr * 1,000 mm x 400 mm x 40 mm * 1,000 mm x 500 mm x 40 mm * 1,000 mm x 600 mm x 40 mm * 1,300 mm x 600 mm x 40 mm * 1,300 mm x 800 mm x 40 mm Large quantities available! Delivery from Gemert (NL). Collection is also possible. ----- These are used shelving racks in very good condition. Contact us for a quotation. Emtrade Scheiweg 72 5421XL Gemert

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter Pjdpfxjv D Duze Adxegr -Manufacturer: Fette, hob cutter 6 pieces -Type: Mod.2.5 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/175/H125 mm -Total weight: 19.4 kg

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter Podpfsv D Dw Aox Adxsgr -Manufacturer: Fette, hob cutter 6 pieces -Type: Mod.3 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/175/H115 mm -Total weight: 14.5 kg

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7,8 t dimensions of the machine ca. 4,40x3,95x3,01 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 Pgodpfx Adev Ehbboxor (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: new, Year of construction: 2025, Sealing module to be added behind "large FILLINGmachines". To close large PE-bags with a hot seal seam. Inclusive 700mm roller belt. Pgsdpfx Adjv Nm Etjxor Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Bosch DM 4K 7101-D, servo module Amplifier module 1070079646-208 Item condition: Used, in perfect condition Shelf(2)B-7_EK(BOR) Podpfx Aek Szy Uedxjgr Financing through our bank is also possible. komplett-konzept.leasingo.de More modules- new and used - you can find in our store! International shipping costs on request!

Condition: excellent (used), Rexroth Bosch MA4/200-7301-M control unit 1070079888 GA1 robot controller modul Item condition: Used, in perfect condition R14A1_PD(BOR) Podpfx Aok Uumfsdxogr More controllers - new and used - you can find in our store! International shipping costs on request!

Condition: ready for operation (used), Fanuc A06B-6077-H106 Power Supply Module Version: C SN:V01110794, the item has been checked and tested! ,used, normal signs of use, 100% functional, scope of delivery as per photos Pgodpfx Asmvknpsdxor

Condition: ready for operation (used), Fanuc A06B-6077-H111 Power Supply Module Version: B SN: EA8829973 , the article was checked and tested! ,used, normal traces of use, 100% functional, scope of delivery according to photos Pgedjnkqy Eepfx Adxer

Condition: new, A self assembly heavy duty modular timber frame table suitable for framing and boarding of panels. The modular 2m or 3m x 1m tables can be assembled in various configurations, to suit either wall panels or floor cassettes. 4 off 2m / 3m x 1m Modular tables suitable for frames up to 4m / 6m x 2.8m PLY top with channel for fitting (optional) pop up rollers Complete with: 1 fixed infill for spacing the table to 2.8m capacity Pgsdpfx Adjn Up R Ijxer 1 sliding infill for supporting subcomponents inside the panel. 9m of fixed fence (6m length x 3m width) Working Height 700 - 850mm

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M Pgsdpfx Adorualpsxer 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: used, PLC control, supply unit, converter, power module, U/E module Pgodpfxofivi Ue Adxor -Power module: Simatics Power Module 240 6SL3224-0BE23-0AA0 -Input: 3 AC 380 - 480 V 10.2 A 50/60 Hz -Output: 3 AC 7.7 A. -Power: 3 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 155/270/H235 mm -Weight: 4.6 kg

Condition: used, PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE21-5UA0 -Input: 3 AC 380 - 480 V 4.8 A 50/60 Hz -Output: 3 AC 4.1 A -Power: 1.5 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 230/75/H240 mm -Weight: 2.4 kg Pjdofivkbopfx Adxsgr

Condition: used, PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE21-1UA0 -Input: 3 AC 380 - 480 V 3.8 A 50/60 Hz Pedpfx Adefivkcexegr -Output: 3 AC 3.1 A -Power: 1.1 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 230/75/H240 mm -Weight: 2.4 kg

Year of construction: 2021, condition: new, ebmpapst EC-centrifugal module, backward-curved, single-intake, with support bracket Type: K3G250-PR04-H2 Motor: M3G084-DF Phase: 1~ Nominal voltage: 230 VAC Nominal voltage range: 200 .. 277 VAC Frequency: 50/60 Hz Method of obtaining data ml Speed: 3080 min-1 Power consumption: 500 W Current draw: 2.3 A Min. ambient temperature: -25°C Max. ambient temperature: 40°C The fans are new and in priginal packaging with 18 pieces per pallet of the production year 10/2021. There are several pallets available. Podpfji D Ei Asx Adxsgr Incl. packaging ex works 53567 Buchholz (Westerwald), Germany. We will gladly organise freight. Please enquire about freight costs, stating the destination.

Condition: ready for operation (used), AGIE PMO-02 A2 power module, output 614030.5, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Podpfx Aei D Txfjdxsgr

Condition: ready for operation (used), Agie Power module, output PMO-01 B 613.930.7, used, minor signs of wear, 100% functional. Pedpfoi D Txuox Adxogr

Condition: ready for operation (used), Siemens 6FC5112-0CA01-0AA0 Sinumerik Interface Module E, version C, used, 100% functional. Pgjdpfx Adoi Edyhexsr

Condition: used, Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Manufacturer: ifm -Type: ecomat300 AC5215 -Number: 36x modules available -Price: per piece -Weight: 0.15 kg/piece Pedpfxjb Nkvcs Adxjgr

Condition: used, Servo Amplifier Module, CNC Control System, plug-in card, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A06B-6058-H334 -Dimensions: 450/250/H180 mm -Weight: 9.6 kg Pgodpfedryd Dox Adxjr

Condition: used, PLC control, control module, measuring system -Manufacturer: Siemens -Type: Simodrive 6SN1118-0DG23-0AA0 1- axis for digital drive Pjdpfx Adjdkpa Usxsgr -Dimensions: 300/120/H45 mm -Weight: 0.6 kg

Condition: used, Digital input module, control, switchgear, PLC -Inputs: 16 Pedodnin Rjpfx Adxsgr -24 V DC -Product number: 7DI439.7 -Dimensions: 82/115/H60 mm -Weight: 0.2 kg

Condition: like new (used), SIMODRIVE 611 Power module, 1-axis, 50A Podpfsrnklnox Adxjgr internal heat dissipation Rated motor currents: Feed=18A main spindle=24A Was stored as a spare part

Condition: refurbished (used), Would you like or need to enhance your current Buhrs ITM envelope inserting system? That is possible, we have all the possible original modules to do so! We have all the original modules available which can be installed at the beginning, on top of the maschine base, or at the end of your Buhrs ITM (W+D) envelope inserter can be installed. Possible modules: - Mueller Apparatebau single sheet feeder transactional channel for feeding/reading/collating/folding A4 documents (intelligent system channel) - Mueller Apparatebau paper cutting sytems for continues paper to single sheets A4 documents transactional channel for feeding/reading/collating/folding A4 documents (intelligent system channel) Pgsdpfx Adot Akt Doxjr - Buhrs ITM turning belt modules - Buhrs ITM Alignment modules - Buhrs ITM Mailtable module - Buhrs ITM feeders like - rotary - friction and shuttle feeders To enhance and or upgrade your current Buhrs ITM BB300, BB600 or BB700 machine? Yes it is possible!