Used Flott 4 Stw for sale (57,303)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Crjdpjd Tqalefx Aipjc Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Crjdpfjfdkb Uox Aipec - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) Crsdpfxoguk A He Aipoc 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm Credpfxsfdkbhe Aipjc - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Cjdpfx Aioguk Dkspjrc - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm Crodpfxeguk Dvs Aipjc - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, pallet spaces: 108 euro pallets, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 8,500 mm, support length: 2,700 mm, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws Crodpfev Ukz Asx Aipsc - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: good (used), Year of construction: 1989, Offered from an insolvency is a ready to use tapping machine Manufacturer Fleet Model SB 15 GL year of manufacture 1989 Machine No. 34177063 Technical data: Cutting capacity M2-M12 Recording MK 2 Pinol stroke 80mm Throat 200mm Chucks Bilz WFP 1 + inserts drill chuck Röhm 0-10mm Foot switch Digital display Pinol stroke Single continuous cycle Emergency stop Speeds from 80-3150 rpm 380 volts Engine power 0,75KW max. dimension between table and holder 380mm Csdefm S Naopfx Aiporc Total height approx. 1700mm Accessories: 8 pcs. Lead screw --pitches-1.5-1.25--1.75--0.8--0.7--0.5--0.45--1.0 Operating instructions weight approx. 200kg

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, total length: 71,000 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, load capacity: 6,000 kg, frame height: 4,000 mm, load per truss pair (max.): 3,000 kg, Pallet Racking System 4 m high, each bay with 2 beam levels (clear width 2700 mm) Scope of supply: 32 frames, 4 m high 128 floor anchors 18 corner impact protectors 100 beams, 2.7 m long, 0.11 m high 150 mesh decks 89/110, load capacity 1000 kg 7 load capacity signs Delivery: free to site Frames bolted, not pre-assembled Credpfx Ajyyny Ejipoc Freight / Delivery: - Maximum 20 working days after receipt of payment - Free delivery to site / assembly location - Unloading from the truck is carried out by the customer using their own lifting equipment - Delivery to anywhere in Germany except islands! Deliveries to EU countries are subject to individual agreement.

Condition: good (used), machine/vehicle number: 12 230091, Grinding wheel dimensions: 300 x 40 x 76 mm grinding wheel speed: 1400 rpm grinding wheel drive: 380 V, 1,5 kW Weight approx.: 85 kg Crjdocwwm Tjpfx Aipjc Space requirement: 720 x 470 x 400 mm

Condition: used, drilling capacity steel/GG: 15 mm spindle taper: 1 MK arm length: 300 mm table size: 210 x 300 mm spindle sleeve stroke: 110 mm spindle turning speed range: 200 - 3000 rpm Crjdpfsvxpp Hox Aipec engine: 380 V, 1,1 kW space needed: 850 x 420 x 1860 mm weight: 220 kg

Condition: good (used), Year of construction: 1993, Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, pillar drill type SB 32 ST-FB suitable for flowdrill -Spindle mount: MK3 -Motor: 3.0 kW -Speed adjustment: stepless with digital display -Speeds: 80 - 4000 rpm -Table size: 500 x 360 mm -Travel distance: 450 mm -Spindle stroke: 160 mm with digital display -Protrusion: 300 mm -Column Ø: 125 mm -Dimensions: 940/590/H1920 mm -Weight: 367 kg Codpoyvhclefx Aiporc

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 440 mm, rapid traverse X-axis: 400 m/min, rotational speed (min.): 2,500 rpm, controller manufacturer: HEIDENHAIN TNC 123, The machine is in very good condition. Immediately ready for use. Codpfsyxprajx Aiperc

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 1781.01 € 10 mm B 16 180 mm 250 - 3000 U/min 0,45 kW 400 mm 248 mm 460 mm 30 kg 50 mm 105 - 245 mm 300 x 200 mm 50 mm Continuous/normal drilling performance 10/12 (in E335/ST60) Manual feed Digital speed display Robust, high quality and inclined rotation hood for easy speed reading LED lighting Cedpfx Aoynmz Neipjrc Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, Year of construction: 2025, neu 2025 030140 prompt, Zwischenverkauf v Deutschland 13429.36 € 257.84 € 1 30 mm MK 3 280 mm Stufe 1: 125 - 4000; Stuf U/min 0,9 / 1,45 kW kW M20 820 mm 520 mm 1900 mm 320 kg 0 - 300 mm/U 240 - 790 mm 420 x 340 mm 125 mm Cjdpfxexcg D Eo Aipsrc Drilling capacity / normal drilling performance25/30 (in E335/ST60) Automatic feed Digital speed-, drilling depth and feed display Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Table height adjustment via toothed rack Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protection Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth display Drilling depth shut-off; programmable; easy operation Drilling cross with pushbutton for feed on/off switching Optional transparent or black protective hood (stock machine transparent) LED lighting as standard OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, Year of construction: 2025, neu 2025 030138 prompt, Zwischenverkauf v Deutschland 3444.77 € 1 13 mm MK 2 220 mm 40 - 4000 U/min M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Crsdpoxcbhrjfx Aipsc Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck) ALTERNATIVE: Version with B16 spindle (Art. no.212500)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 42,000 h, functionality: fully functional, overall weight: 3,315 kg, total length: 3,200 mm, total width: 1,630 mm, total height: 1,960 mm, motor manufacturer: Siemens, power: 236 kW (320.87 HP), volume flow: 3,013 m³/h, operating pressure: 4 bar, noise level: 77 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 1 unit Low-Pressure Screw Compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3,013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Compressor speed: 3,630 rpm Speed control: with integrated frequency converter Cooling: Water-cooled with stainless steel shell-and-tube heat exchanger FUNKE 1.4571 Electric motor: Siemens 1LG6 316-4ZZ91-Z Dimensions Length: 3,200 mm Width: 1,630 mm Height: 1,960 mm Crsdpfx Aoywr Tkjipoc Weight: 3,315 kg Also available: Cyclone Afterseparator Manufacturer: BZ Zyklone Model: 175 (stainless steel) Condensate drain Bekomat Shell-and-Tube Heat Exchanger Manufacturer: Funke Model: A100 805-6-1Pass Material: Stainless steel 2x Rubber Expansion Joints 1x Intermediate Flap Valve DN 150 with Auma Actuator SG 05.1 F07 1x Cooling Water Control Valve Samson 3274 DN 50 PN 16 1x Steel Pipe DN 150 with 2x 90° bends

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 4758.02 € 18 mm MK 2 240 mm 30 - 3000 U/min M12 355 mm 705 mm 1065 mm 170 kg 100 mm 155 - 415 mm 155 - 550 mm 340 x 280 mm 82 mm Continuous/normal drilling performance 18/20 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Coolant device LED lighting with pivot arm Drill package 3 (vice & keyless chuck) Crjdpfx Aoynm Aasipoc

Condition: used, Drilling and Tapping Machine FLOTT Model TBZ 15 GL Serial No. 32177027 Year of Manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Throat depth: 195 mm Quill stroke: 80 mm Table size: 275 x 200 mm Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power connection: 380 Volt, 50 Hz Csdpfedzp S Nsx Aiperc - Spindle speed selection via 2 motor speeds, 6 belt steps from the motor and 2 belt steps to the spindle - Drilling head height adjustment via crank and rack on the column - Tapping device with guide bush and selector for right- and left-hand threads - 3 guide bushes for right-hand threads: 0.7 mm, 0.8 mm, and 28G included - Tapping possible with or without guide bush - 1 geared drill chuck Ø 1.5 to 13 mm - Foot switch for cycle start - Emergency stop - Original metal base included Space requirements (L x W x H): 700 x 350 x 1850 mm Weight: 165 kg Good condition

Year of construction: 2000, condition: ready for operation (used), Various smaller workshop metalworking machines from various manufacturers are available. 1) Brush machine RSA STL, year of manufacture: 1979. 2) Belt grinder Flott BSM 75. 3) Pull saw Graule ZS 85, year of manufacture: 1994. 4) Belt grinder Ludwig Gartner AZ2N. 5) Band saw Raim 360, year of manufacture: 1995. 6) Column drilling machine Quantum B 30 GS, year of manufacture: 2005. 7) Belt grinding machine HM TAS 75, year of manufacture: 2000. 8) Assembly band saw Berg & Schmid PBS 148. 9) Pull saw Graule ZS 200 N-S, year of manufacture: 2015. 10) Aluminum circular saw MEP Cobra 350 MA. 11) Notching saw Graule AS 450-D, year of manufacture: 2003. 12) Corner crimping press Rapid HP-205, year of manufacture: 1995. 13) Hydraulic press Schüco. 14) Notching saw Graule AS 450, year of manufacture: 2000. 15) Tie bar punching machine Schüco LA 10, year of manufacture: 2020. An on-site inspection is possible. A package sale of all items is preferred. Crjdpfx Ajyu T Eheipec

Condition: new, Year of construction: 2026, - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electric. Protection - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: digital - Drilling depth display: digital - Feed (mm/revolution): by hand - Spindle speeds continuously variable: 60 – 6,000 rpm - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (depending on pitch): M6 - FACTORY WARRANTY: 3 years (single shift) Cedsfx U D Ajpfx Aiporc - OPTION drilling package 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and keyless drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 1989, Drill, drill press, pillar drill, pillar drill -Handover: in the current condition as seen -Measuring system and speed display: imprecise -Manufacturer: Flott, column drill type SB 15ST with autom. feed -Motor: 0.35/0.65 kW -Speed: stepless Crjdpshx E T Hsfx Aipsc -Table size: 215 x 200 mm, travel 635 mm -Spindle holder: MK2, with drill chuck -Spindle stroke: 40 mm -Projection: 200 mm -Columns Ø: 70 mm -Dimensions: 600/830/H1735 mm -Weight: 150 kg

Condition: used, Drilling machine, drill press, pillar drill, column drill -Condition: Working -Note: Clamping table repair-welded, see pictures -Manufacturer: Flott, column drill type SB 15 -Spindle mount: MK2 -Motor: 0.525 kW -Speed adjustment: via V-belt -Speed speeds: 215 - 400 - 730 - 1250 - 2300 - 4300 rpm -Table size: 220 x 220 mm -Spindle holder: MK2 with drill chuck Crjdpfx Aisfv Unvspjc -Travel: 360 mm -Spindle stroke: 55 mm - Throat: 295 mm -Column Ø: 100 mm -Accessories: collecting tray for coolant -Dimensions: 930/700/H1805 mm -Weight: 190kg -Handover: in current condition as seen

Condition: good (used), Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, Pillar drill type 23 mm -Spindle mount: MK3 -Motor: 1.1 kW -Speed adjustment: via V-belt -Speeds: 200 - 2000 rpm -Table size: 300 x 300 mm Crjdpfx Ajyaptxoipec -Travel distance: 440 mm -Spindle stroke: 145 mm -Protrusion: 300 mm -Column Ø: 125 mm -Dimensions: 900/450/H1900 mm -Weight: 306 kg

Condition: good (used), Drilling machine, drill press, pillar drill, column drill -Manufacturer: Flott, column drill type SB 23 pieces -Speed speeds: 200 - 2000 rpm, continuously variable via variator disc -Table size: 300 x 300 mm, travel 595 mm -Spindle holder: MK3 with drill chuck -Spindle stroke: 150 mm -Throat: 295 mm -Column: Ø 110 mm -Dimensions: 920/450/H1920 mm Crjdpfxsqzl His Aipoc -Weight: 345 kg