Offset printing press

HEIDELBERG Heidelberg XL 106 - 4 + LX - 2018

Condition: used, Year of construction: 2006, 38 Mio. prints approx. Format: 370×520 mm (14×20″) Easyplate CP-Tronic, Alcolor Streamfeeder Low-pile delivery Perfecting Powder sprayer Rjdpfx Ajzzwrdji Tjch Available: at short term

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Rcodpevy Aipofx Ai Tsh Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Year of construction: 2001, condition: excellent (used), Gietz FSA 790 EFF, year of manufacture: 2001 Technical specifications: - MABEG feeder - 2 x transverse foil - 3 x longitudinal foil - Hot foil embossing (2 x honeycomb plate) - Die-cutting (additional die-cutting tool) - Hologram option (electronics refurbished in 2020) - 6 heating zones Rjdjzd T Hpepfx Ai Tsch Technical details: - Maximum sheet size: 790 x 560 mm - Minimum sheet size: 297 x 210 mm - Maximum stamping area: 720 x 520 mm - Speed up to 5,500 sheets/hour

Condition: used, Hot foil embossing press, Heidelberg GTP, year of manufacture 1965 – machine number: GTP 63590N. Working size: max. 340 x 460 mm. Pressing force: 60 tons. Complete with accessories and closing frame. If you are interested, we will be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our facility after prior arrangement of an appointment. Redpszwdh Djfx Ai Tech

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Heidelberg Speedmaster XL 75 - 4 + L X – 2019 Redpfx Aioyt H A Rj Tjch Serial Number : LS001736 Year of Manufacture : 2019 Impression Count : Only 72 mio imp. ! 4 colors + coater offset press of size 53 x 75 cm (C-Size) equipped with: • PRINECT PRESS CENTER XL 2 • AXIS CONTROL 2 (Spectrophotometric colour measurement ) • AUTOPLATE PRO (totally automatic plate change) • COATING UNIT with chambered doctor blade and Anilox Roller (13 cm³ per m² cells) • Extended Delivery (X2) • Infra-Red Dryer • SPEED : Option 18.000 Sheets Per Hour • Preset PLUS Feeder & Delivery (full automatic Size Setting) • ALCOLOR dampening with VARIO • Technotrans Central Refrigeration CombiStar with Alcosmart • Ink Temperature Control • ALL Automatic washers (blanket, rollers and impression cylinders) • Air Transfer System • FilterStar • Steel Plate in feeder and delivery (for pallets) • Chromed cylinders • AIRSTAR PRO (Air Supply Cabinet) • Pneumatic compressor • PowderStar Weko AP 500 Powder Spray • Advanced antistatic device in feeder & delivery • Electronic double sheet and side lays control • Powder/process air suction CleanStar Compact • Air Cooled machine • Can print up to 0,8 mm Machine in very good condition… Available immediately Can be seen running, any print test welcome !

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 16074, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Automatic Sheet Seperator UTM-4 Automatic Sheet Seperator TM -4 Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Rodpfxezimygs Ai Tech Powder Spray Removal Device GK-4 Automatic Stacker S-3 Airjet-Dryer

Condition: ready for operation (used), Year of construction: 1998, Working width: 650-1305mm, exception PET/ALU/PE and ALU/PE: max. 1100mm, production speed: 120-220m/min, max. operating speed: 300m/min, max. primary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, adhesive application 2K for film/film: approx. 1.5-2.5g/m², 1K for paper/film: approx. 2.5-4g/m², max. secondary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, max. rewinding roll diameter: 1200mm, core inner diameter cardboard core: 152mm, steel core: 150mm, processable materials, min. polyester film: 10µm, min. aluminum foil: 6.6µm, min. PE film primary unwinder: 40µm, min. PE film secondary unwinder: 30µm, max. paper: 150g/m², length: 8625mm, complete documentation vorhanden. An on-site inspection is possible. Rsdjy Uydfspfx Ai Tjch

Condition: excellent (used), Year of construction: 2017, Ref: 11038 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Rodpfoxyxr Njx Ai Toch Format: Up to 36’’ (915mm)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 102 (Waterbased & Thermal) Rsdpfx Ajzvn Hzji Tsch Seperating Unit TM-102-K: Automatic Sheet Seperator with Quadruple Round Knife Seperating Unit: Quadruple Round Knife, Perforating Device Jogging Table (Delivery)

Condition: used, machine/vehicle number: 6694, We are offering our laminating line for sale. The following components have already been serviced/overhauled: · Overhaul or cleaning of the sheet feeder drive unit in 2025 · New main drive 2024 with frequency converter (manufacturer SEW) · Overhaul of temperature control units (2 pcs.) in 2022 · Dryer drum and laminating roller · Heaters, level switches, and power contactors have been replaced. Redpfeyt Iprjx Ai Toch · Slip clutch separator overhauled in 2023 · Application roller modified with motor and frequency converter (manufacturer SEW) in 2017 The machine is still in operation and is being sold due to a reduction in our machine fleet.