Used Four-Rope Orange Peel Grapple for sale (4,005)

Condition: used, Year of construction: 2006, total width: 4,210 mm, total height: 1,830 mm, Dimensions (LxBxH): 190 x 421 x 183 cm Price: On request - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107707 - Number of spindles [pcs.]: 5 - └ Spindle 1: Kledpfx Abjwng Rfotet - - Motor power [kW]: 5.5 - └ Spindle 2: - - Motor power [kW]: 7.5 - └ Spindle 3: - - Motor power [kW]: 7.5 - └ Spindle 4: - - Motor power [kW]: 7.5 - └ Spindle 5: - - Motor power [kW]: 7.5 - Feed table length [mm]: 1800 - Feed motor [kW]: 3 - Voltage [V]: 400 - Current consumption [A]: 78 - Fuse [A]: 80 - Power [kW]: 36.0 - Transport dimensions: 1900mm x 4210mm x 1830mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2016, volume flow: 5 m³/h, energy consumption: 35 kWh, peeling centrifuge 3000 rpm , 630 mm diameter bowl Kodpfxevm Ur Ao Abtjlt

Year of construction: 2026, condition: new, ⭐️ Four-Post Car Workshop Lift ⭐️ TM-GROUP 4SF-4000B 4 Tons Automatic FOR WHEEL ALIGNMENT / FOR GEOMETRY HIGH-QUALITY OIL AND INSTALLATION KIT INCLUDED FREE Specification: ✅ Manufacturer: TM-GROUP ✅ Maximum lifting capacity: 4 tons ✅ Type: Automatic ✅ Connection: Bottom ✅ Power supply: 400V (optional 230V) ✅ Lifting time: 60 seconds ✅ Lifting height: 1750 mm ✅ Limit switch: Yes ✅ Motor power: 2.2 kW ✅ Telescopic rolling jack arms, allowing lifting of the vehicle also under the sills Kljdpfx Aow Ta I Tjbtst ✅ Expansion plates (with locking option) ✅ Turntable slots ✅ Self-lowering ramps ✅ Automatic locks lowering to create a blocking threshold for the vehicle ✅ Anchors included: Yes ✅ Hydraulic oil 10L: free ✅ Meets requirements for UDT certification: Yes ✅ Ramp length: 4250 mm ✅ Ramp width: 918–1118 mm Is this lift for me❓ The automatic four-post lift is suitable for servicing almost any passenger car, from a 2-door coupe to large 4x4 off-road vehicles. The 4000 kg (4T) capacity also allows lifting smaller delivery vans. The lift ensures full service and repair capability for vehicles of larger dimensions and weight. What about the repair range❓ Our lift is perfect for work related to wheel alignment and geometry, suspension repairs, as well as engine or gearbox servicing. The high lifting (175 cm to the tire base – practically higher by half the wheel diameter) allows for any inspection. Documentation: The lift is delivered with the necessary documentation: ✅ Declaration of conformity with CE certificate ✅ User manual in English ✅ Automatic rolling jack FREE❗

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, filling opening width: 700 mm, filling opening length: 960 mm, Untha RS 50 Shredder Kedpfx Asy R Egqsbtolt Power: 37 kW / 380 V 50 Hz Electrical cabinet – Siemens Simatic S7 Chamber dimensions: 960x700 mm New knives: 310/2Z and 270/8Z Quick-change screen system. Weight approx. 3,200 kg. Machine is fully operational and ready for use. Serviced by the manufacturer. Price on request. More photos and a video of operation available on request. For further information, please call.

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Max. working area: 883 mm MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m Kedpfx Ajy Nbtkjbtolt EQUIPMENT Separate hydraulic power unit Control panel

Year of construction: 2025, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you by phone. Westtech Woodcracker CS610 compact grapple saw / incl. Power-Tiltator / Year of manufacture: 2025 / DEMO unit / in stock & immediately available / Excellent condition! Price: €38,190.00 net / €45,446.10 gross - Cutting diameter: 610 mm - Grapple opening width: 1,280 mm - Own weight (basic - fully equipped): 830 - 1,060 kg - Recommended hydraulic flow: 65 - 110 l/min - Recommended auxiliary hydraulic flow: 40 - 60 l/min - Recommended operating pressure: 230 - 280 bar - Carrier vehicle operating weight: 15 - 20 t - Saw box: actively suspended - Chain lubrication: grease Equipment: - Including Power-Tiltator We stock a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.)—available immediately. Klodpfoy Nv Ehox Abtet Our warehouse has a very large selection of various Westtech products, available immediately! Mr. Herden (Tel.) will be happy to assist you. Financing offers available upon request. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker product range! Errors and prior sale excepted! Internal No.: 422068 = More information = New: No Part suitable for: Forestry applications Please contact Marius Herden for further information.

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW 5.Right side head -18,5 kW Kodpfxjyzq Rce Abtelt 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, FOUR IPSEN 224 SOUS VIDE OVENS They have been thoroughly refurbished Model: VFC-224R Nitrogen tank Power: 40 kW Usable dimensions: 500 x 310 x 220 mm Cooling pressure: 5 bars Located in Spain and available for inspection EXCEPTIONAL PRICE: €75,000 net EXW, loaded onto truck Kedpfey Nnxtjx Abtslt

Condition: used, Year of construction: 1997, Beam planer 260 x 160 mm, trailing chamfer unit on the upper spindle, air cushion table with two-axis control for left and upper spindle, factory-new control system (latest Weinig version) Max. working width: 260 mm Max. working height: 160 mm Number of spindles: 6 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment of upper spindle: electric Optionally with/without feed Feed brake system: Yes Feed speed infinitely variable up to: 3 – 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing cutter on jointer: Yes Powered rollers in table: 1 Control type: PLC control Spindle position display: mechanical numerical display Infeed rollers before jointer: Yes Air cushion table: triple track Central lubrication point: Yes Description: short infeed table 1050 mm with internal lighting Klsdpfowwwkhjx Abtot Location: Nattheim

Year of construction: 1971, condition: used, Shaft system 1 bottom - 4kW, 2850 rpm 2 right lateral - 3 kW, 2850 rpm Kedpfx Ajigqzrobtelt 3 lateral left - 3 kW, 2850 rpm 4 right side 3 kW, 2850 rpm 5 top 5.5 kW, 2850 rpm 6 bottom - 4kW, 2850 rpm Dimensions 4900 mm x 1300 mm x H 1500mm Weight approx 5500 kg

Condition: new, Type MB6023HK Working width 230 mm Working height 150 mm 6 spindles B-4kw, R-4kw,L-5.5kw, T -7.5kw, T-5.5kw,B-4kw Spindle diameters 40 mm Feeding speed 5-30 m/min Total power. 38.25kw Kledpfx Abjikv Acjtet Transport dimensions 3750x1600x1500mm Weight 3400 kg Price 21300 Eur (EXW Jonava, Lithuania)

Year of construction: 1971, condition: used, Type G617 Working width 170 mm Working height 110 mm Infeed table length 1600 mm 7 spindles B, R, T, L, R, T, B Spindle diameters 40 mm Feeding speed 30 m/min Made in Germany 1971 y. Transport dimensions 4900x1100x1500mm Weight 3100 kg Kljdpfeh U R T Sox Abtot Price 2400 Eur (EXW Jonava, Lithuania)

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 195 h, load capacity: 3,000 kg, lifting height: 4,900 mm, fuel type: electric, mast type: triplex, construction height: 2,243 mm, drive type: Elektro, Four-way front forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Klsdpfx Abjy Rbgtotjt Sideshift, fork positioner, Heater, full cab,

Condition: used, -Reference: 7.2 / 84x214-4 -Oven dimensions (WxDxH): 1475x2780x2400 mm -Hearth size (WxD): 840x2140 mm -Baking surface: 7.2 m² -Serial No.: 1405116/BN/0010 -Temperature: 300°C -Electronic controls -Year: 2014 -4 decks -Voltage: 400V -Power: 43.5 kW -Weight: 3400 kg -High-efficiency combustion chambers Kledjy H Hykepfx Abtet -Combustion chamber with reinforced insulation -Large radiant surface across the three flue channels, ensuring rapid temperature recovery after loading -Flue channels fully lined with refractory material to improve temperature retention and heat resistance STEAM -Steam generator for each deck -Steam generators located on the right side inside each baking chamber -Electrovalve group for water supply mounted on the oven roof -STEAM EXHAUST -Individual steam exhaust for each baking chamber -Hood with steam extraction fan -Steam extractor with single speed -Manual steam exhaust valves ELECTRICAL INSTALLATION -Controls located on the left side -Electrical panel accessible from the front for easy maintenance -Lighting system with 1 lamp per deck positioned at the mouth, easily replaceable -Safety thermostat

Condition: used, - External dimensions (LxWxH): 1082x1052x1117mm - Capacity: 20 x GN1/1 - 20 shelves: 540x330mm - Combi oven for 1 trolley - 3 cooking modes: steam, convection, combination - 5 fan speeds Ksdpfx Abjy H Htwetjlt - Voltage: 400V - Weight: 336kg - Refurbished equipment: unit is prepared upon order; collection and return times are agreed at that moment (please enquire for post-refurbishment pricing) - Automatic climate control - Automatic cooking management - Production scheduling - Automatic cleaning and descaling management - 9 automatic cleaning programmes

Condition: used, - Masonry annular tube deck oven - Internal dimensions: - 4 decks, width: 3100 mm - Slab depth: 2210 mm - Mouth width: 620 mm Kljdjy H E Dnjpfx Abtjt - Baking surface: 27.404 m² - Refurbished equipment: the equipment is prepared upon order; pick-up and return timings are agreed upon at that moment (please request price after refurbishment)

Condition: used, -Dimensions: 1870x2430x2300 mm -Panel size: 602x1840 mm -Number of tiers: 5 -Year: 2005 -Serial number: 10619802 -10 outlets -Voltage: 400V -Power: 45.6 kW Ksdpfx Abjy H D Ncjtolt

Condition: used, -Dimensions: 1620x2225x2300 mm -Serial no.: 12026399 -Model: Omega 4 -Slab size: 801x1840 mm -Year: 2007 -Baking surface: 5.9 m² -Max. temperature: 300 °C -Integrated loader/lifter -Voltage: 400V -Power: 27 kW -Weight: 1590 kg -Overhauled equipment: equipment is prepared upon order; collection and return deadlines are agreed at this time (please request price after overhaul) -Front panel with brushed stainless steel hood Kljdpfxoy H D A Aj Abtot -Heavy-duty refractory cement baking decks, 20 mm thick -Stainless steel sheathed electric heating elements -1 independent relief damper per deck -1 independent steam generator per deck -Thermal treated glass to reduce heat loss -Steam unit and column always on the same side -Equipped with steam extractor for the hood -Insulation by cross-laid rock wool panels -High-temperature silicone cable wiring harnesses

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Kljdpfx Asy Nivyjbtot

Condition: reconditioned (used), functionality: fully functional, Refurbished four-sided planer by SCM GROUP. The simple and robust design ensures long-term durability and high performance. The rigid steel machine base guarantees machining accuracy and quality. The machine is intended for larger operations specializing in the production of shaped and straight profiles. Features: - 5 working spindles: bottom, right, left, top, bottom - Automatic central lubrication of the working table - Material feed speed variator - Inspected machine with half-year warranty - Excellent technical condition - Equipped with tooling Technical data: - Working width (finished profile thickness) min/max: 25 / 230 mm Kodpfxevxtzao Abtolt - Working height (finished profile thickness) min/max: 6 / 120 mm - Table length: 2000 mm - 1st spindle (bottom): approx. 5 kW - Right and left spindle: approx. 7 kW - 4th spindle (top): approx. 7 kW - 5th spindle (bottom): approx. 5 kW - Tool speed: 6000 rpm - Stepless feed speed: 4 - 24 m/min - Feed motor: 4 kW - Weight: approx. 3000 kg

Condition: excellent (used), Year of construction: 2026, New tree shear by Westtech, model CL260 Riskzone 50 m – quick-coupler system Pladdet CW10 – Woodcracker – = Further information = Year of manufacture: 2026 Intended use: Forestry Please contact Miguel Cubas for more information. = Company information = Kedpfxeygugqo Abtelt We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 170 mm 3) Left vertical, 170 mm (spindles 2 and 3), 11 kW 4) Top horizontal, 230 mm, 11 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 11 kW - All spindles adjustable up/down, left/right - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles equipped with electric braking - 6 feed-in, driven, toothed upper rollers, including 1 double - Double exit, driven, rubber-coated upper roller - Double exit, driven, rubber-coated lower roller - Side pressure unit - Feed via Kardana shafts - Pneumatically tensioned rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 4 kW - Electric planing thickness adjustment Kledpfsy N Ahijx Abtot - Body lifting motor: 0.55 kW - Central table lubrication - Extraction nozzle diameter: 6 × 140 mm - Dimensions (L×W×H): 4,900 × 2,400 × 2,000 mm - Weight: approx. 4,000 kg FEATURES – German-made, WEINIG brand – With 6 heads – Not repainted – Used planer, very good condition Original pictures Net price: PLN 142,900 Net price: EUR 34,000 (based on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 6368 TECHNICAL DATA - Max width of the workpiece: 230mm - Max height of the workpiece: 130mm 7 spindles: 1) Horizontal, lower: 230mm, 5.5kW 2) Vertical, right: 130mm, 5.5kW 3) Vertical, left: 130mm, 5.5kW 4) Horizontal, upper: 230mm, 7.5kW 5) Horizontal, upper: 230mm, 11kW 6) Horizontal, lower: 230mm, 18.5kW 7) Universal: 230mm, adjustable at 360 degrees, 5.5kW - All spindles adjustable up/down, left/right - All spindles equipped with an electric brake Kodpfx Asy N Agxobtolt - Spindle diameter: 40mm - Spindles 4 and 5 adjustable electrically up/down - Top: 8 metal, torsion-type, infeed rollers, including 2 double rollers - Top: 4 rubber, outfeed rollers - Top: 2 pressure rollers - Bottom: Latches - Bottom, side: 3 pressure rollers - Bottom: 2 metal, smooth, infeed rollers - Bottom: 2 double, rubber, infeed rollers - Rollers pneumatically pressed - Feed via Cardan shafts - Stepless feed speed adjustment: 5-36m/min - Feed motor: 4kW - Electric adjustment of planing thickness: 0.75kW - Length of infeed table: 1980mm - Enclosed in a cabinet - Central lubrication of the table - Dust extraction nozzle diameters: 5x120mm, 2x150mm - Dimensions (L/W/H): 5500x1840x1900mm - Weight: approx. 5000kg ADVANTAGES – Made in Italy – With 7 heads – For wet and dry wood – Last spindle is universal – Unpainted – Used planer, very good condition Net price: 136900 PLN Net price: 32600 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary depending on higher fluctuations)

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, Due to equipment replacement, a Changa Iron Cm-767C four-sided moulder, year 2010, is for sale. In working condition. Ksdpfey N Eb Sjx Abtjlt 6 spindles. Working width 18–230 mm, height up to 150 mm. Feed speed up to 36 m/min. Suitable for planing and profiling timber materials. Located in Kandava, inspection possible. Available immediately.

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Kedpfx Abswqb Scstjlt Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.