Used Frecuency Inverter for sale (1,764)

Year of construction: 2026, condition: new, functionality: fully functional, pallet changer: semi-automatic, Samzon Pallet-Inverter DC model (Dual clamp) is a stationary pallet inverter machine with two movable platforms. This machine is mainly used to exchange pallets to new or for removing paper spacer or freezer spacer. The pallet is fed into the machine using a pallet truck or pallet jack. The machine can either 180-degrees or stop at desired position depending on your needs. To remove paper spacer or freezer spacer, the machine is rotated from 0 to 90-degrees, pressure from the platforms is alleviated to allow for removal of spacers. Changing pallets, either because of a defect pallet or swapping it to a plastic pallet, the new pallet is placed on top of the product, the platforms press down on the product, rotate 180-degrees, and the product is now standing on its new pallet. This does require manual pallet handling, to place the new pallet on top – to avoid manual lifts a different type of pallet-inverter is recommended. The pallet inverter can be delivered with a variety of extra equipment and surface treatments. Hedpsw Udngefx Ab Tst

Year of construction: 2026, condition: new, functionality: fully functional, pallet changer: manual, Samzon Pile-turner 104L is a stationary machine used for changing the pallet under a product. This model is often used in the paper-industry. A major advantage with this machine is that the platforms can close-down to 320mm, which means the Samzon Pile-turner can handle very low products. Samzon Pile-turner closes around the product with platforms, tilts back by 90 degrees, the tower is released and is rotated manually 180 degrees and once again locked. The bottom platform is then lowered back down, the platforms open, and the products has been placed on a new pallet. The pallet is fed into the machine using a pallet truck or pallet jack. The pallet turner can be delivered with a variety of extra equipment and surface treatments. Hedpfoxyuqzox Ab Tet

Year of construction: 2026, condition: new, functionality: fully functional, pallet changer: semi-automatic, Samzon Pallet-Inverter DC model (Dual clamp) is a stationary pallet inverter machine with two movable platforms. This machine is mainly used to exchange pallets to new or for removing paper spacer or freezer spacer. The pallet is fed into the machine using a pallet truck or pallet jack. The machine can either 180-degrees or stop at desired position depending on your needs. To remove paper spacer or freezer spacer, the machine is rotated from 0 to 90-degrees, pressure from the platforms is alleviated to allow for removal of spacers. Changing pallets, either because of a defect pallet or swapping it to a plastic pallet, the new pallet is placed on top of the product, the platforms press down on the product, rotate 180-degrees, and the product is now standing on its new pallet. This does require manual pallet handling, to place the new pallet on top – to avoid manual lifts a different type of pallet-inverter is recommended. The pallet inverter can be delivered with a variety of extra equipment and surface treatments. Hjdpfx Absw U Rlle Tjt

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling Hodpfx Aot Awm Djb Tjt - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) TIG welding machine Serial No. Year of manufacture: 2007 TIG output 170 amps = 35% duty cycle 130 amps = 60% duty cycle 110 amps = 100% duty cycle Electrode output 140 amps = 35% duty cycle Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator - fan cooling - portable Equipment dimensions (L x W x H) 400 x 270 x 500 mm Hjdpfxertvi Uo Ab Tjt Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Overall in very good condition.

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Hedpfxjrtvi Re Ab Tet Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation - HF ignition - pulse welding mode - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Condition: used, Inverter welding machine for manual arc welding, TECHNOLIT Type PROFImat 170 Plus MMA welding machine, inverter welding machine, manual arc welding inverter New - unused Serial No.: TB1703500316 Article No.: 440030 Year of manufacture: 2022 Output WIG (DC) 170 amps, 45% duty cycle 150 amps, 60% duty cycle 135 amps, 100% duty cycle Output manual arc welding 170 amps, 35% duty cycle 145 amps, 60% duty cycle 125 amps, 100% duty cycle Adjustment range 5-170 amps, continuously adjustable Mains connection 230 volts, 50 Hz - Hot-start function (optimizes ignition behavior, simplifies starting the welding process for electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents possible sticking of the electrode) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition - Stick electrode welding, suitable for all electrode types up to Ø 4 mm - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Equipped with a 230-volt Schuko plug - S-mark for welding under increased electrical hazard - Overvoltage protection Dimensions (device without cable) L x W x H 310 x 155 x 265 mm Weight (without cable) 7 kg NEW - unused, from stock Hodpoi E Iz Isfx Ab Tet

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Hjdpfxovg Rh Ts Ab Tjt Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Weight (without cable) 23 kg New, unused

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Hedpfx Abopy Uzys Tst Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding unit POLYSOUDE PS 204 + RC 200 Year of manufacture: 1996 Serial number welding source: 9785153 Serial number cooling unit: 968628 Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains connection: 230 volts, 50 Hz, Schuko plug - Note: Display on the power source becomes illegible after some time - Remote control cable type BP 1436 with 7.5 meter connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 118,643 operating hours (read off) - Operating and maintenance manual Space requirement welding machine (L x W x H): 550 x 360 x 500 mm Space requirement cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Note: Display on power source becomes illegible after some time Without accessories Hedpoyhq A Refx Ab Tot Price applies to one set consisting of 1x power source and 1x water cooler.

Condition: used, MF welding machine with water-cooled projection welding head Medium-frequency projection welding head Manufacturer: TECNA (Italy) Model 3670 E CF00 Serial No.: Year of manufacture 2014 Rated welding power 25 kVA Max. welding power 160 kVA Mains connection 400 Volt, 50 Hz - Welding control TE750 or TE760 - Projection welding head for single-sided spot welding Hsdog U A Uzspfx Ab Tet - Ideal for repair work in the bodywork area, ensuring the best welding quality - Water-cooled, type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - like new

Condition: used, Transistor pulse converter for three-phase feed drives with analog control, servo controller SIEMENS, Type Simodrive 610, 6SC6101-3A-Z Serial No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse converters were developed to power the three-phase servo motors 1FT5/1FS5. The dynamic characteristics of these motors are to be utilized optimally. By using appropriate components in the power unit, the pulse converters can be used for a wide variety of tasks. This flexibility is further increased by expansion modules for the power unit area. Connection voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included in the scope of supply)) Output voltage: 3 UC 200 Volt Efficiency: approx. 95 % Number of feed axes: 4 Speed setpoint: +-10 Volt Auxiliary voltage: 24 Volt Relay contact for alarm/ready messages Hsdpfx Ash D Syvsb Tst Dimensions WxHxD: 339 x 440 x 300 mm Weight: approx. 25 kg The servo controller is still operational and is installed in a Gildemeister GDM42. Further components from the Gildemeister can be found under the following stock numbers: 60343, 60347, 60348

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1210496, type of input current: three-phase, total height: 1,260 mm, total width: 441 mm, total length: 852 mm, input voltage: 400 V, type of cooling: water, welding power (max.): 35 kVA, Equipment: documentation/manual, We offer this used medium-duty PEI POINT BSP 136 INVERTER rocker arm spot welder FR, year of manufacture 2012. Manufacturer: PEI POINT Model: BSP 136 INVERTER Year of manufacture: 2012 Condition: used Category Id: 905 Hjdpoy Eyipsfx Ab Tot Type Id: 1918 Type: MEDIUM-DUTY ROCKER ARM SPOT WELDER FR If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 285033, type of input current: three-phase, input voltage: 400 V, type of cooling: air, overall weight: 25 kg, electrical fuse: 32 A, cutting current: 105 A, hose package length: 6,000 mm, sheet thickness steel (max.): 50 mm, air demand: 15 m³/h, air pressure: 5.8 bar, protection type (IP code): IP23, product height (max.): 50 mm, High-end air plasma cutter for manual cutting. Although the system is equipped with a manual cutting torch, it can also be used for mechanical cutting. The interface for CNC cutting is already installed The manual cutting torch with a length of 6 meters is included in the scope of delivery. Hederq E R Uopfx Ab Tst The system was operated in our application center for demonstration purposes. The system has an effective cutting time of less than 30 minutes. Further technical information can be found in the attached document / data sheet

Condition: used, Thread rolling machine ORT RP30U 2-roll 30 ton Hodpfx Aot H Ty Uob Tst swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Condition: excellent (used), For sale Leica DM IL LED Microscope Hedpfx Absr Ty Nhe Tst Leica S40/0.45 S40 - Slider 11521253 Head: Binocular Eyepiece: HC Plan 10x/20 mm Lenses: Leica N Plan 2.5X0.07 Leica N Plan 5X0.12 Leica N Plan 10X0.25 Leica N Plan L 40×0.55 Illuminator: LED illuminator Includes various accessories and EU power cord.

Condition: used, Wigo Double squaring machine with 3 groups per side, complete with inverters. - right and left circular saw - right and left cutter - right and left cutter Max working width: mm. 1500 Engine power: Circular saws: 3KW X2 Toupie Milling Machines: 5.5kw x2 Hjdpfeummldsx Ab Tst Rotary Sanders: 5.5kW x2 Feed motor: 4KW Shoulder width adjustment motor: 3KW

Condition: used, Year of construction: 2008, functionality: unexamined, power: 1,500 kW (2,039.43 HP), nominal power: 1,500 kW (2,039.43 HP), rotational speed (min.): 1,490 rpm, rotational speed (max.): 1,490 rpm, input voltage: 690 V, input frequency: 50 Hz, input current: 730 A, type of input current: DC, overall weight: 5,400 kg, protection type (IP code): IP55, 1.5 MW DC motor (water-collected) including Simovert masterdrive Hedpov Uwfhefx Ab Tst Description attached!

Condition: ready for operation (used), Dimensions: Width: 180 mm Hodpfxexfk Dzj Ab Tot Depth: 460 mm Height: 280 mm Year of manufacture: 2008 Cutting thickness: Quality cut 12 mm – Severance cut 14 mm

Condition: new, Flender ATB-Loher 2E2R-20400-015 frequency inverter, unused, in opened original packaging, 100% functional. Hsdpfx Absi D U N Is Tst

Condition: ready for operation (used), Year of construction: 2004, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of September 21st to October 1st! TECHNICAL DETAILS Travel in X-axis: 700 mm Travel in Y-axis: 550 mm Travel in Z-axis: 450 mm Feed Axes Max. travel speed X, Y, and Z axes: 30 m/min Max. acceleration X, Y, and Z axes: 15 m/s² Positional accuracy TP according to DIN ISO 230-2: 0.005 mm Repeatability: 0.002 mm Work Table Table length: 850 mm Table width: 700 mm Number of T-slots: 5 T-slot dimensions: 18 H12 Table load: 2,000 kg Max. workpiece weight: 2,000 kg Distance spindle center – table: 550 mm Spindle Spindle mount: HSK-E 40 Spindle speed: 3,000 - 42,000 rpm Spindle power: 17 kW Tool Changer Tool magazine positions: 40 MACHINE DETAILS Machine type: CNC HSC machining center CNC control: Andronic Electrical Connection Data Supply voltage: 400 V Supply frequency: 50 Hz Fuse rating: 32 A (?) Dimensions and Weight Overall length: 3,300 mm Overall width: 2,300 mm Overall height: 2,300 mm Overall weight: 7,700 kg Operating Data Machine operating time: 275 d 5 h 13 min 39 s Hodpfxjzqupxs Ab Tot Spindle operating time: 11,297 h 20 min 11 s EQUIPMENT - Full enclosure - Dust and fluid-proof guides - Oil mist extraction - Compressor cooler - Frequency inverter - Heidenhain glass scales in X, Y, and Z axes - Work light in the interior - Technical documentation - Workbench - HSK-E-40 tool holders - Tools - Workbench dimensions: approx. 1,500 × 900 × 1,100 mm External Reference: Demo - Lot 2

Year of construction: 2020, condition: refurbished (used), functionality: fully functional, Refurbished at Industrial Microwave Services Ltd to comply with UK Safety Standards. • Manufacturer/Brand: Tianjin Leici Electronic Technology Co., Ltd. (A prominent Chinese specialized manufacturer of industrial microwave drying systems and component integration). • Core Subsystem Model: MG1000 (Specifically utilizing the MG1000 Microwave Inverter Power Supply units coupled with dedicated industrial air-cooled magnetrons which have been upgraded). • Equipment Classification: 18kW Industrial Tumbling Cage Microwave Drying/Sterilization Oven. The 18kW total operating rating is achieved structurally by stacking 18 modular 1kW MG1000 power-and-magnetron sets together inside the machine grid. Machine External Dimensions: 1550mm Wide - 1178mm Depth - 1800mm High Internal Cavity Depth: 900 mm Door Width: 680mm 6 x Internal S/S trays - 805mm long - 295mm Wide - 9mm Depth 18Kw at 100amps 3 phase + neutral needed Hedpfx Aeyv H T Aeb Tet Weight approx. 500kg. Refurb Notes 1. Control system being fitted with a siemans PLC, controlled from a 4” siemans H.M.I. 2. Applicator structural strengthening and seam welding of all joints. 3. Emergency stop safety systems to conform to U.K. safety standards. 4. Strengthen the main frame to enable the equipment to moved without damage. 5. Improve the Magnetron launch inputs to the cavity. 6. Fit serviceable covers on all Magnetron ports inside applicator cavity.

Condition: used, Type Combi 12110 TF continuous grilling line all stainless steel bottom contact grilling + hot air suitable for steam injection belt width 1.100 mm net length 11.000 mm underplate max. 260°C air temperature max. 280°C dimensions (l x w x h) : ± 13.500 x 1.700 x 2.400 mm independent platen – air temperature and steam control adjustable speed PLC control Siemens frequency (new hard- and software, frequency inverters) Hsdpfxezw D Nze Ab Tet With new Teflon belt suitable for thermic oil heating (± 600 kW) with belt wash system

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, power: 37.5 kW (50.99 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 500 t, stroke length: 400 mm, operating speed: 7 mm/s, reverse speed: 60 mm/s, table width: 530 mm, table length: 4,100 mm, throat depth: 500 mm, distance table to ram: 890 mm, overall weight: 42,000 kg, - Heavy-duty press brake > 300-ton capacity per meter > ideal for high-strength alloy steels - 6 axes: Y1 / Y2 / X / R / Z / V - The upper ram has an extension (horn) of 500 mm > total bending length of 4,100 mm - Hydraulic upper tool clamping - Capable of conical bending! - Akas laser safety system - CNC crowning - Equipped with a V-Matic variable bending die (CNC control); from V40 to a maximum of V160 - The machine is floor-mounted; no foundation is required - Included: a large set of heavy-duty tooling for highly alloyed steels! - The tools are stored in a mobile cart that can be attached to the machine. The operator can then install and remove the upper and lower punches and dies manually. Brand: HACO Model: ERM 36500 1 unit in total Bending capacity: 500 tons x 4100 mm (bending length) Electrical supply: 380V Hsdpfx Ajzw I N Sob Tot Robosoft numerical control (Macon, 4 axes, proportional valve amplifier, integrated by Muritech) Siemens S7 PLC Invertek Optidrive CP frequency inverters Baumüller servo amplifiers Motorized multi-axis back gauge with cable carrier chain Safety: Type 4 DSP Laser non-material light curtain (transmitter/receiver), CE certified Dell control screen Supplied with a large set of tooling: V-dies of various lengths, radii, and openings Work table with roller conveyors for sheet metal handling Machine is stationary, not tested under power - on-site inspection recommended before bidding Reinforced version: ram designed to support a load of 300 tons per meter Special CNC-controlled variable V-die (V40 to V160) Hydraulic clamping at the top CNC crowning Press equipped with a 500 mm horn User-friendly control via 2D touchscreen, Thurei 02E version 2025 software 2 custom-made tool carts for storing bending tools, designed for tool changes Dismantling/removal: must be carried out by a specialized company No suitable lifting equipment available on site Logistical visit essential before removal Serial number: 81599 Sale due to bankruptcy

Condition: used, mileage: 120,050 km, power: 120 kW (163.15 HP), first registration: 01/2020, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 3,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Internal vehicle number: 0815X ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing and trade-in options available. Full range of vehicles available at autonext? Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Top condition! 1st owner, German vehicle, non-smoker vehicle Complete service history, exclusively serviced at Mercedes Benz Permissible total weight 5t 12 tires Summer tires on steel rims Winter tires on steel rims Workshop "Sortimo" with workbench and shelving system Inverter Hodpfx Aozxarnjb Tet 230V external socket 230V sockets LED headlights "High Performance" Rear view camera Parking assist front and rear Regulated air conditioning (Tempmatik) Blind spot assistant Lane keeping assist Hill start assist Seat heating Auxiliary heating with remote control ---- Standard equipment: Radio preparation, two-way speakers in front, 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, towing eye at the rear, adaptive brake light, airbag on the driver's side, Anti-lock Braking System (ABS), Anti-Slip Regulation (ASR), drive type: all-wheel drive, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, outside temperature display, headliner in the driver's cab, automatic activation for headlights, electronic brake force distribution (EBV), electronic stability program (ESP), driving assistance system: active brake assist, driving assistance system: crosswind assist, driving assistance system: lane keeping assist, digital tachograph, downloadable, electric windows 2-way, transmission automatic GTronic - (7-speed), body/structure: high-roof van standard, keyless start, child safety lock, communication module (LTE) for digital services, fuel tank: main tank 71 L, cargo area partition, steering wheel (adjustable steering column), headlight range adjustment, Mercedes-Benz emergency call system, engine 2.1 L - 120 kW CDI KAT, particulate filter, wheelbase 3665 mm, low emissions according to emissions standard Euro 6, sliding door cargo/passenger compartment on the right, safety belt system with warning system (driver's side), seat cover / upholstery: fabric, seats in the driver's cab: passenger seat with armrest, seats in the driver's cab: passenger seat adjustable, seats in the driver's cab: driver's seat with armrest, start/stop system, daytime running lights, fleece battery 70 Ah, preparation for DAB radio reception, service interval display Assyst, immobilizer, heat-insulating glazing (windshield with band filter at the top), central locking with remote control, permissible total weight 5.00 t. ----If desired, we can perform a new MOT/emission test. ----Warranty and a "TÜV Profi Check" are, of course, available from us! We will also be happy to take your vehicle in part exchange! We will also prepare an individual financing or leasing offer for you! Without a deposit, redeemable at any time and with special repayments. Please direct your requests to our sales team, we will be happy to advise you. ----Arrange an appointment for a test drive and be convinced of the quality of our vehicles. Appointment arrangements: Mon-Fri from 08:30 - 18:00, Sat from 09:30 - 13:30. ----Visit us also on [website address]. We look forward to your visit! ----Errors and chan