Used Frequency Converter 3.7 Kw 50/60 Hz for sale (66,919)

Condition: good (used), Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights, individual uprights, bracing profiles, shelf panels, shelves, shelf boards -Storage rack: Steel uprights and wooden shelves in various sizes -Shelf stands: Dimensions 1990 x 500 mm (10 Euro net) 1 pc. / 2992 x 500 mm 5 pcs. (12 Euro net) -Shelf units: 1000 x 500 mm 194 pcs (5 Euro net) / 1000 x 600 mm 168 pcs (6 Euro net) Rjdsr U Sgwjpfx Ammsu -Weight: Stands 5.4 to 8.4 kg/pc. / Shelves 5.6/6.3 kg/pc.

Condition: used, machine/vehicle number: 516329J00165, Year of construction: 2018, Output: 15.0 kW, lifting capacity: 5,000 kg, unladen weight: 5,398 kg, duplex mast, side shift, partial cabin, STILL afx 30V/140A battery charger, recorded operating hours: 3,461 hours. Rsdjy U R Rvepfx Ammeu

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,395 h, load capacity: 4,990 kg, lifting height: 6,260 mm, free lift: 1,950 mm, fuel type: electric, mast type: triplex, construction height: 2,950 mm, fork length: 1,600 mm, drive type: Elektro, Electric four-wheel forklift Mast type: Triplex Condition: Ready for use and fully functional Technical condition: normal Redpfxey T S R Ie Ammou Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 60 - 80% Battery voltage: 80V Battery capacity: 930Ah Battery type: PzS Battery year of manufacture: 2023 3rd valve, 4th valve, 5th valve, electric

Condition: used, 800040V1444, TURBOVAC T1600, Oerlikon Leybold turbomolecular pump with frequency converter Model: 800040V1444 Type: TURBOVAC T1600 Condition: Used Note on condition: Redpferfxgbjx Ammeu free of contamination

Condition: used, mileage: 16,920 km, power: 80 kW (108.77 HP), first registration: 11/1992, fuel type: diesel, overall weight: 5,000 kg, next inspection (TÜV): 01/2027, color: red, gearing type: mechanical, number of seats: 7, total length: 5,500 mm, total width: 2,280 mm, total height: 2,500 mm, * VW LT 50 with 7 seats - original 19,620 km - TÜV (road inspection) - TOP condition - * Diesel - engine capacity: 2,383 cc - 80 kW / 109 hp - Euro 0 - ??? emissions sticker * 5-speed manual transmission - with built-in shelving - tow bar with 2,500 kg towing capacity - Rodjxw Dc Ijpfx Ammju * German vehicle - German vehicle registration - one owner - * Vehicle immediately available and ready for pick-up - * Please arrange an appointment for viewing - * Contact: Mr. Andreas Vogel * The specifications provided online are non-binding descriptions. * They do not constitute guaranteed properties. * The seller is not liable for typing or data transmission errors. * Subject to changes, errors, and prior sale. * Spare wheel with matching tires, 7 seats in the cab, gross vehicle weight 5.0 t

Condition: good (used), D No. 13015956 / Serial No. 000038 Input: 3-phase SC 400/480V 7.0A 5.8 kVA 50/60Hz Output: 3-phase AC 0/480V 7.0A 5.8 kVA 0-480Hz Rjdpfx Amjy Tufhjmsu Application: Drive control Width: 98 mm Height: 350 mm Depth: 250 mm Weight: 4.9 kg Condition: good, second-hand

Condition: used, Year of construction: 2002, SEW Movitrac Frequenzumrichter 31C011-503-4-00 Redpfx Aek Abqqommsu RA1284 Hersteller: SEW Eurodrive Typ: Movitrac 31C011-503-4-00 Zustand: gebraucht/ geprüft/ voll funktionsfähig Version: 011-503-4-00 Preis: zzgl. MwSt. ab Zentrallager Dr. Sonntag GmbH & Co. KG 97076 Würzburg

Condition: good (used), Siemens Micromaster 440 6SE6440-2UE37-5FA1 Frequency Converter 75kW 90KW 6SE6440 MICROMASTER 440 WITHOUT FILTER 3AC 500-600V +10/-10% 47-63HZ CONSTANT TORQUE 75 KW Redpfx Amoxl Tglomju OVERLOAD 150% 60s, 200% 3s SQUARE TORQUE 90 KW 850 x 350 x 320 (H x W x D) PROTECTION CLASS IP20 AMBIOTEMPERATURE -10+50°C WITHOUT AOP/BOP 440-2UE37-5FA1 Manufacturer Price: €6290 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Year of construction: 2023, load capacity: 4,990 kg, lifting height: 6,060 mm, total length: 4,430 mm, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 Rjdjy T Srrepfx Ammeu - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Year of construction: 2019, condition: used, functionality: fully functional, Approximately 250 pieces in stock. Price per piece: 100 Euros. Rjdpfx Aey Uc Sfjmmeu A mix of used and new items.

Condition: like new (used), operating hours: 666 h, functionality: fully functional, input voltage: 400 V, input current: 96 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP20, year of last overhaul: 2026, continuous power: 55 kW (74.78 HP), Equipment: type plate available, Exact model designation: Danfoss FC-202P55KT4E20H1XGCXXXSXXXXAXBXCXXXXDX Output power and output current: 55 kW | 106 A 131F6656 ° With certification seal! ° Only 666 motor operating hours - manufacturer states over 100,000 possible! ° Easy operation via integrated control panel ° Quick parameterization possible thanks to the quick menu ° Original operating instructions for commissioning included Rodpfoy Ugihsx Ammsu Only 1 unit left in stock! The item has been reset to factory settings and is therefore in its original condition as delivered by the manufacturer. Please refer to the original product images for the visual condition. Fully functional and ready for immediate use.

Condition: new, functionality: fully functional, input voltage: 400 V, input current: 418 A, type of input current: AC, input frequency: 50 Hz, protection type (IP code): IP00, continuous power: 250 kW (339.91 HP), Equipment: type plate available, Exact model designation: Schneider MX pro 4V200/250 Output power and output current: 250kW | 481A MP4C20BAA ° NEW in original packaging, opened! ° Formed! Rodpfx Amoy Uggmomsu ° Easy operation via integrated control panel ° Quick parameterization possible ° Original operating instructions for commissioning included Only 2 units left in stock!

Condition: used, Year of construction: 2022, load capacity: 4,990 kg, lifting height: 4,425 mm, fork length: 2,400 mm, total length: 4,311 mm, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 Rsdpfx Amjy Tp Nzemou - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: used, Indramat power supplies and drives Rsdpfx Amoxrf Twomou

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. Rsdjy R Npispfx Ammeu The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, functionality: fully functional, SEW 2 x MC07B0003-5A3-4-00 + FBG11B Frequency converter, Keypad. U=3X380...500V I=0.9 A AC f=50....60 HZ Rsdpfotvz E Nsx Ammou P=0.25 kW/0.40 HP Good working condition. Please check out our other listings as well.

Condition: used, Colour: Grey - Documentation available: No - CE certificate present: No - Serial number: 50172 - Power [kW]: 5.0 - Number of outputs [pcs]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Redowh Nuyjpfx Ammju Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: good (used), Frequency converters, frequency converters, drive converters, controllers, variable speed drives Redjcbqquopfx Ammsu -Input: 1/N/PE AC 230 V 9 A 50/60 Hz -Output: 3/AC 0-230 V 4 A 0.75 kW 0-480 Hz -Price: per piece -Number: 5x available -Weight: 1.7 kg/piece

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station Manufacturer: Rexroth/Hydraudyne, hydraulic station with oil cooler / accumulator / filter ... -Type: 03 HDJ -Engine power: 22 kW/1460 rpm -Tank capacity: approx. 240 liters -Pressure gauge: up to 250 bar Rodpfx Asgz Irvsmmou -Individual components: pressure accumulator/hydraulic tank/filter/valves (see pictures) -Number: 2 units available Price: per piece -Dimensions: 1060/820/H1530 mm -Weight: 738 kg

Condition: ready for operation (used), ABB Robotics 2 x PS 60/4-50-P-LSS-3985 servo motor combination SN: 910.8090020-063 / 910.8090020-029, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Redpfx Aoi D Eycemmou

Condition: used, Year of construction: 2001, Used Filling Monoblock RIVI 50-60-12 12000 bph Technical Features and Operating Details of the Used RIVI Filling Monoblock  The Used Filling Monoblock RIVI 50-60-12 12000 bph delivers high efficiency and operational reliability through its integrated bottling system. RIVI manufactured this machine in 2001, combining rinsing, filling, and capping functions into a single unit that optimizes both space and production time. Consequently, the Used RIVI Filling Monoblock suits companies aiming to enhance their bottling operations seamlessly. Monoblock Specifications and Bottle Formats The 50-60-12 model processes PET bottles with diameters between 50 and 95 mm and heights ranging from 150 to 340 mm. Additionally, it supports formats of 1.5 L, 0.7 L, and 0.5 L, enhancing flexibility for various production needs. Furthermore, it achieves a production rate of 12,000 bottles per hour, making it ideal for medium- to high-capacity production lines. The machine measures 5370 mm in length, 4070 mm in width, and 3000 mm in height, and weighs 20,000 kg. Moreover, the system rotates clockwise, which ensures continuous and uninterrupted production flow. Rodpfxsvxum Ds Ammou Rinsing Section In this section of he Used RIVI Filling Monoblock, 50 grippers firmly hold bottles by the neck, stabilizing them during the rinsing process. Each bottle receives a single treatment, during which filtered water or a sanitizing solution removes dust and residues. In addition, the synchronized rotation system ensures that the rinse covers all areas uniformly, while the controlled drainage system effectively prevents liquid buildup and contamination. As a result, this process thoroughly prepares the bottles to receive the product without compromising quality. Filling Section The machine uses a gravity light depression filling system, which is ideal for non-carbonated liquids such as still water. However, it also efficiently fills sparkling water by maintaining gentle pressure control, ensuring minimal gas loss. With the proper modifications, it can handle certain types of soft drinks, making it versatile for a variety of production needs. The system employs 60 dedicated filling valves, allowing precise product flow while avoiding foaming or turbulence. Sensors continuously monitor and regulate the fill level, ensuring consistent quality even at high speeds. Capping Section The capping section relies on 12 heads to securely apply plastic screw caps. The machine includes an automatic cap feeder, with a hopper capacity of 10,000 to 13,000 caps, supporting Neck 1881, low thread, and sport caps. First, the system automatically feeds and positions the caps above the bottles. Then, each head screws the caps on with the correct torque, creating a tight, hermetic seal that preserves both gas and product freshness. Additionally, integrated sensors detect improper tightening and immediately report any errors. Therefore, the system reduces waste while guaranteeing reliable sealing and operational efficiency.

Condition: new, working width: 510 mm, area performance: 2,040 m²/h, overall weight: 112 kg, input voltage: 230 V, water tank capacity: 60 l, Technical specifications: Condition - NEW! Catalog number: 1.127-002.0 Power supply: 230V cable Drive: Propulsion via brush rotation Brush working width (mm): 510 Suction working width (mm): 900 Fresh/dirty water tank capacity (l): 60 / 60 Theoretical cleaning capacity (m²/h): 2040 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 27.3 – 28.5 / 20 – 23 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 67 Color: anthracite Total weight with water (kg): 112 Weight without accessories (kg): 52 Dimensions (L × W × H) (mm): 1170 × 570 × 1025 Scope of delivery and equipment: Rjdpeya Et Uefx Ammeu 900mm V-shaped suction bar with oil-resistant polyurethane rubber pads 510mm red disc brush - medium-hard Features: 2-tank system Advantages: - Self-explanatory symbols and clear control panel. Solenoid valve for automatic water shut-off after releasing the dead man's switch. Easy operation thanks to a few yellow-coded controls. - Highly maneuverable and easy to handle. Excellent visibility of the area to be cleaned. - Designed for daily use. Robust, durable, and reliable machine. Key features: - Options for attaching hooks, containers, mops, etc. - Additional cleaning supplies can be carried. - Excellent value for money.

Condition: ready for operation (used), DC Converter, Simoreg Siemens DC-Converter D485/30 Mre-GeE6S22, Used Machine Manufacturer: Siemens Simoreg Model: D485/30 Mre-GeE6S22 Rjdpfx Aeu U Ilgsmmeu Overall Dimensions: Length: 270 mm Width: 230 mm Height: 385 mm Weight: 6 kg Electrical Specifications: 3-Phase Input: 3AC; 400V; 25A Output: DC 485V; 30A 2-Phase Input: 2AC; 400V; 5A Output: DC 325V; 5A

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM Rodpjyhc T Iefx Ammju - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp (14) units available.

Condition: used, Year of construction: 2007, load capacity: 4,990 kg, lifting height: 6,450 mm, total length: 5,045 mm, - Bedienung Sitz - Tragfähigkeit 5,0to - Lastabstand 535 mm - Achslast vorn mit Last 11547 kg - Achslast hinten mit Last 1154 kg - Achslast vorn ohne Last 3845 kg - Achslast hinten ohne Last 3866 kg - Bereifung SE - Räder, Anzahl vorn (x = angetrieben) 2x - Räder, Anzahl hinten (x = angetrieben) 2 - Spur vorn mm 1104 - Spur hinten mm 920 - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 6 - Kupplungshöhe mm 546/421 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4284 - Arbeitsgangbreite bei Palette 800 x 1200 längs - Wenderadius 2549 mm - Kleinster Drehpunkt 638 mm - Fahrgeschwindigkeit mit Last km/h 18 - Fahrgeschwindigkeit ohne Last km/h 19 - Hubgeschwindigkeit mit Last m/s 0,31 - Hubgeschwindigkeit ohne Last m/s 0,44 - Senkgeschwindigkeit mit Last m/s 0,55 - Senkgeschwindigkeit ohne Last m/s 0,46 - Zugkraft mit Last N 3600 - Zugkraft ohne Last N 4400 - Max. Zugkraft mit Last N 15670 - Max. Zugkraft ohne Last N 16090 - Beschleunigungszeit mit Last s 5,4 - Beschleunigungszeit ohne Last s 4,7 - Betriebsbremse elektr./mech. - Fahrmotor, Leistung KB 60 min kW 15 - Batteriespannung V 80 - Energieverbrauch 60 VDI-Arbeitsspiele/Stunde kWh/h 12,1 - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min 30 Rodpoy E Ugvjfx Ammeu - Schallpegel, Fahrerohr dB (A)