Used Gf Hawk for sale (807)

Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Njdpsdubpuofx Akuswg Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Nodpstqfhxsfx Akujwg Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: good (used), Year of construction: 2003, Belt conveyor, Mosca, approx. 69cm long, GB 50cm - used - : Price from location: only €500 (net)!! Pos:C2 Manufacturer: Mosca Type: GF Year of construction: 2003 No.: 71240 Element length: approx. 69cm Belt width: approx. 50cm Height: approx. 85cm 3L-N-PE 400V, 1.4A, 0.4kW Control voltage: 24V Condition: good Nwodpsvx Hfxofx Akusg Available: immediately Location: Frankenberg warehouse / Saxony

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,850 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 9,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 650 CNC machining center - Important note: the spindle was replaced in 2025 for approximately EUR 40,000, therefore, very few spindle hours! - Pallet dimensions: approx. 320 x 320 mm - The pallets are clamped onto the rotary table. - Tool holder: HSK-E 40 Nedpfx Akey Tvcuouewg - For further technical data, see the images. - Includes technical documentation. - Includes HSK-E 40 tool holders and three pallets. Attention: The item must be collected between July 21st and July 23rd, 2026, on a date to be agreed upon. FCA D-80339 Munich - loaded onto a truck.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 655118, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 38 kVA, total height: 2,300 mm, total length: 3,300 mm, total width: 2,200 mm, overall weight: 7,200 kg, spindle speed (max.): 42,000 rpm, input voltage: 400 V, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 550 CNC machining center (5-axis) Nwjdjy Tutlspfx Akuog - Distance between HSK-E tool holder and table: 450 mm - Swivel angle of A-axis: -120°/+60° - Swivel angle of C-axis: n x 360° - Tool holder: HSK-E 40 - Clamping surface with 4th and 5th axis: Pallet dimensions: approx. 300 x 300 mm - Maximum travel speed: 30 m/min - Repeatability: 0.002 mm - Digital display: 0.001 or 0.0001 mm (selectable) - For further technical data, see the photographed images - Includes technical documentation - Includes three spare pallets - Note: Specific fixtures have been attached to the pallets - Includes HSK-E 40 tool holders Attention: The item must be collected between July 21st and July 23rd, 2026, on a date to be agreed upon. FCA D-80339 Munich - loaded onto a truck.

Condition: good (used), Year of construction: 2010, Belt conveyor, Herber, approx. 4.10m long - second-hand - Price ex location (net): only 825.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos46 Manufacturer: Herber Type: GF-210-NB- 500 MA.bl Year of construction: 2010 Length: approx. 4,10m Nominal width: approx. 500mm Element width: approx. 60cm Engine: SEW Njdpou Etv Iefx Akuewg Condition: good Available immediately Location: CZ, Bor, later stock Frankenberg / Saxony

Condition: good (used), Year of construction: 2010, Belt conveyor, Herber, approx. 3.63m long - second-hand - Price ex location (net): only 795.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Pos45 Manufacturer: Herber Type: GF-210-NB- 500 MA Year of construction: 2010 Nwsdpeu Etudefx Akuog Length: approx. 3,63m Nominal width: approx. 500mm Element width: approx. 60cm Engine: SEW Condition: good Available immediately Location: CZ, Bor, later stock Frankenberg / Saxony

Condition: good (used), Year of construction: 2010, Ascending conveyor / belt conveyor, Herber, approx. ?.10m long - second-hand - Price ex location (net): only 825.-€ incl. dismantling, packing and loading! Please note our other advertisements for this site liquidation: A total of almost 90 items of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, diverters, inclined conveyors, various folding storage boxes, order picking trolleys, packaging machines, etc.! Item 47 Manufacturer: Herber Type: GF-210-NB- 500 MA Year of construction: 2010 Length: approx. ? Nominal width: approx. 500mm Nodpfsu Etxcex Akuswg Element width: approx. 60cm Engine: SEW Condition: good Available immediately Location: CZ, Bor, later stock Frankenberg / Saxony

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, TECHNICAL DETAILS Nwodpfx Ajy Rxryjkusg Travel X-axis: 650 mm Travel Y-axis: 1,100 mm Travel Z-axis: 500 mm C-axis rotation: 360° MACHINE DETAILS Control: CNC Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Net weight: 13,000 kg EQUIPMENT Chip conveyor Tool magazine Probe

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Riser with arch and straight GF 5865-550-400 RA2505 Technical data: Conveying length (NL): 5865 mm (ascending conveyor 2455 mm + arch 3410 mm) Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope/slope: adjustable Optionally available: Nedey R Hbpjpfx Akuowg Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Riser with arch and straight GF 4846-550-400 RA2506 Technical data: Conveying length (NL): 4845 mm (ascending conveyor 4105 mm + arch 740 mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope/slope: adjustable Optionally available: Supports Side guides frequency converter for stepless speedcontrol Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Njdpfxjy R Hbvs Akuswg Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor belt transfer GF 1000-550-400 RA2508 Technical data: Conveying length (NL): 1000 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Njdpfoy R Hb Nex Akuswg Year of construction: 2001 Optionally available: Supports Side guides frequency converter for stepless speedcontrol Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Georgii Kobold KOD 7410-A FO / WK motor SN:600236 + SPN GF 85 gearbox SN:527820 + Georgii Kobold fan ,used, normal signs of wear, 100% functional, scope of delivery as per photos Nsdpoi D H Udjfx Akujwg

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 20000-650-500 RA1407 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 20.000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Njdpfey Rbg Hjx Akuowg

Condition: used, Year of construction: 2014, Transnorm belt conveyor GF 4365-600-500 RA2493 Technical data: Conveyor length (NL): 4365 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm Njdpoy Nf I Sjfx Akujwg belt return roller: Ø = 45 mm Year of manufacture: 2014 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, functionality: fully functional, machine/vehicle number: SK02UXKP0579, measuring range X-axis: 550 mm, measuring range Y-axis: 600 mm, overall weight: 1 kg, repeat accuracy: 0.02 mm, Equipment: documentation/manual, ZEISS T-SCAN hawk metrology laser 3D scanner with accuracy 0,02mm + 0,035mm/m with 3 scanning modes (Standard - 7 red crosses, Fine - 5 blue lines, Single red line for deep holes). Manufacturing year 2022. Fully functional and ready to use. Included: 3D scanner Calibration panel Nwedpsyxy Sdsfx Akueg Powerful Dell mobile workstation still under Dell Pro Support Warranty Software GOM/ZEISS Inspect 2021 licence on USB drive Rigid travel case Laptop bag All original documentation included Inspection under working conditions possible. ZEISS INSPECT 2021: • Opening and editing new and existing projects • Import of point clouds and polygon meshes • Creation, editing, and processing of polygon meshes • Construction of elements: basic geometries, points, sections, curves, surfaces, dimensions • Import of CAD data in standard formats: IGES, VDA, STEP, JT Open, STL, PLY • Use of common alignment methods • CAD comparison with color deviation mapping • Dimensioning and evaluation of form/position according to ISO GPS and ASME Y14.5 • Reporting module Delivery

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Riser with Arch and Straight GF 6005-650-500 Nwedpfxoy Hymks Akuog RA2485 Technical data: Conveying length (NL): 6005 mm (ascending conveyor 2420 mm + arch 500 mm + upper straight 3085 mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 1715-650-500 RA2484 Technical data: Conveying length (NL): 1715 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2001 Optionally available: Supports Side guides Prices plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Nedsy Hymdjpfx Akuewg

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: 1205 AS 11578-1, Storemaster Rolly Shuttle Tower GF – Drawer Rack for Sheets up to 3m x 1.5m, Storemaster – used - : Manufacturer: Storemaster Type / System: Rolly Shuttle Tower GF System Type No. 04 Year of manufacture: 2012 1. RollyTowerSL System Type No. 04 Heavy-duty drawer storage system for storing large-format, wood-free sheet metal packages For sheet sizes up to: 3,000 x 1,500 mm (13 drawers usable area) with a load capacity of 3 tons each = 85 mm packet height OverheadTop: with one support level + 8 cassettes at 3 tons load capacity each in a 225 mm compartment grid. 2. RollyTowerSL System Type No. 04 Heavy-duty drawer storage system for storing large-format, wood-free sheet metal packages For sheet sizes up to: 3,000 x 1,500 mm (10 drawers usable area) with a load capacity of 3 tons each = 85 mm packet height OverheadTop: with one support level + 8 cassettes at 3 tons load capacity each in a 225 mm compartment grid. Nsdoy Ev H Repfx Akuewg Shuttle Tower: Base tower H: 4565 mm x W: 3977 mm x D: 2000 mm Subject to prior sale and errors excepted.

Condition: used, Year of construction: 1998, Transnorm conveyor belt GF 15000-600-500 RA2067 Technical data: Conveyor length (NL): 15000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Nwodpfey Et Thex Akujg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm belt conveyor GF 3250-700-600 RA2470 Nwsdpfxsyi Inye Akujg Technical data: Conveyor length (NL): 3250 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0.5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 1994 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2002, condition: good (used), functionality: fully functional, doubledeck screen box: 1.000 x 5.000 mm squared meshes on both screen decks Nsdpfxolxzkke Akuswg E-motor 4 kW steel-construction and outlet chutes

Condition: excellent (used), max. workpiece diameter 600 mm threading length 7000 mm Nedpfx Akjwgizdjuowg max. module 8 / 12 min. module 1 swival range ° diameter of hob 63 - 140 mm spindle turning speed - stepless 45 - 450 U/min weight of the machine ca. 12,5 t dimensions of the machine ca. 9,0 x 2,0 x 2,2 m Condition: In good condition, checked and partially overhauled by a specialist. The existing milling head was replaced by an overhauled universal milling head. Furnishing: Differential for inclined machining Automatic indexing device (indexing discs changeable!) For multi-wedge, multi-thread parts, then extensive bushings, support rollers and around 70 Change gears. Conversion of the milling head speed to a frequency converter with corresponding powerful motor is a great thing and saves a lot of set-up time. Equipment: Around 70 change gears, 3 bushing sticks of different sizes, around 20 Bushings, 2 roller mountings, 2 tips for direct mounting on the Clamping spindle, 350 mm chuck, 2 spare part disks.

Condition: used, total length: 1,400 mm, total height: 2,050 mm, total width: 1,400 mm, Empty weight: 500 kg Price: On request Granulator Dreher S26/26 VS Machine No. K 8329 Built in 1982 Engine 5.5kW Speed 1440 Rpm. 2 fixed blades 3 rotating blades (need to be replaced) Funnel opening: 360x240 mm Interchangeable strainer Sieve holes 6mm - Documentation available: No - CE certificate present: No - Main motor power [kW]: 5.5 - Rotation speed [rpm]: 1440 - Opening width [mm]: 360 - Opening length [mm]: 240 - Sieve perforation [mm]: 6 - Number of rotating knives [pcs.]: 3 - Number of fixed knives [pcs.]: 2 - Transport dimensions: 1400mm x 1400mm x 2050mm (l x w x h) - Transport weight [kg]: 500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nwodpfx Akewh Naijusg Yorick Diebels

Condition: excellent (used), Year of construction: 2010, operating hours: 50,000 h, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 40,000 rpm, 🔧 Technical Data Machine type: CNC milling machine Axes: 3 axes (X/Y/Z) Travel distances (X/Y/Z): 👉 approx. 550/400/400 mm (typical for this model, please confirm if required) Machine number: 655083 Year of manufacture: 2010 Main voltage: 400 V / 3~ / 50 Hz Fuse: 63 A Power consumption: 32 kVA Machine weight: approx. 7,000 kg 🌬️ Extraction and filtration system (major advantage) Manufacturer: KELLER Lufttechnik Model: L-CUT-1-P3-B60-V Motor power: 3.3 kW Year of manufacture: 2010 👉 Integrated dust/smoke extraction 👉 Significantly cleaner working environment 👉 Ideal for continuous operation in toolmaking 🧩 Features CNC control with operator panel 3-axis machining Compact and robust design Complete system including extraction unit Made in Germany Nodpfxeyxyz So Akuowg 📦 Condition Machine in ongoing production Fully functional Well maintained Inspection under power possible 🚛 Delivery Available at short notice Free loading onto truck 📌 Applications Mold making Electrode manufacturing Precision machining 📞 Note Further images, videos, and technical details available on request. Subject to prior sale.