Used Greiner Thermorunner 4 for sale (58,782)

Condition: good (used), functionality: fully functional, DALEX PMS 10-4 powerful and robust industrial spot welding machine, supplied as a ready-to-use set with a matching COHLINE water cooling unit. Highlights & Condition Extremely low operating hours: The installed digital DALEX MPS 100 controller shows an original counter reading of only 13,282 cycles. For an industrial machine of this class, this indicates exceptionally low use and minimal wear. High electrode force: Ndsdpfx Agszz H Eyjrjb This model provides a powerful electrode force of up to 690 daN, enabling reliable welding points even on thicker sheet metal. Cooling unit included: Thanks to the powerful COHLINE cooling unit with 5.8 kW cooling capacity, the machine is suitable for continuous industrial operation without overheating. Flexibility & Safety: Equipped with a key switch for easy selection between operation via foot switch or two-hand safety control panel. Technical Data at a Glance DALEX PMS 10-4 Spot Welding Machine Maximum welding power: 294 kVA Rated power (50% duty cycle): 80 kVA Maximum short-circuit current: 51.7 kA Supply voltage: 400 V / 50 Hz No-load voltage: 3.5 to 7 V Electrode force: 115 to 690 daN Controller: DALEX MPS 100 with digital display Machine weight: approx. 465 kg COHLINE WRK 245-53 Cooling Unit – Year 2000 Rated cooling capacity: 5.8 kW at 32°C ambient / 15°C water temperature Refrigerant: R407C, 4.0 kg Supply voltage: 400 V / 50 Hz Fuse protection / Current consumption: 16 A / 9.0 A Operating cycles: 13,282 cycles Everything from a single source: We will be happy to offer you suitable bank financing for your project. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, URBAN AKS 6410/4 four-head welding machine, from right to left, maximum welding dimensions: 2,700 × 2,500 mm, Windows control system, weld bead limit of 0.2 mm for coloured profiles, previously operated on a single shift, technically refurbished and fully functional. Ndedpfeznwq Tjx Agrsb

Condition: good (used), Year of construction: 2010, 4 jaw air chuck SCHUNK Type: ROTA TB 850-270 LH/4 Year 2010 with control unit . Chuck diameter 850 mm Bore 270 mm Nodpfjubbx Hex Agredb Jaws are individually adjustable with many soft jaws in good condition.

Condition: used, machine/vehicle number: 008701, Max working length: 2740 mm Max working width: 1240 mm Ndjdpfjzq Urtsx Agreb Membrane: yes No of positions for the rolls: 2 No of work tables: 1

Condition: used, Year of construction: 2008, machine/vehicle number: 0007-2008, 4 chambers with dry steam, glass doors, suitable for this Ndodpjzzpm Hefx Agrob Number available (price per tank): 1 electrical power supply kW: 5 Sleevetunnel chambers: 4 Strom / Volt: 400

Condition: used, CNC universal tool milling machine DECKEL, type FP 4 ME - DEFECTIVE Machine No. 2205, Year of manufacture 1989 CNC path control: GRUNDIG Contur 3 - Control system does not boot up Travel ranges: X: 485 mm, Y: 385 mm, Z: 380 mm Table size: 800 x 460 mm Spindle mount: ISO 40 Spindle speed: 63 - 3150 rpm, 22 steps Feed rate range: 2 - 3000 mm/min, stepless Quill movement: Horizontal and Vertical Main spindle drive: 3.7 / 4.4 kW - Hydraulic tool clamping - Swiveling control panel - Electronic handwheel - Fixed angular table - Coolant system in the machine base - Control cabinet located next to the machine, dimensions L x W x H: 800 x 750 x 1150 mm Space requirement L x W x H: 2000 x 2000 x 2000 mm Nodez Ebvrepfx Agredb Weight approx.: 2400 kg Good condition - control system does not boot up.

Condition: good (used), functionality: fully functional, axle configuration: 2 axles, first registration: 07/1992, Year of construction: 1992, Equipment: crane, hydraulics, For sale is a robust tandem crane trailer with a HIAB loading crane, type 205-4. The crane was manufactured in 1992 and, despite its age, is in good and functional condition. The crane trailer has only been used sparingly in recent years and is therefore being sold due to lack of use. An inspection and functional test on-site are possible by arrangement. The equipment includes a winch, grapple, remote control with charger, and concrete counterweights. The crane has several hydraulic extensions and hydraulic outriggers. Thanks to its large reach, this combination is suitable for various tasks in agriculture, forestry, construction, and transport. Equipment / Scope of supply: HIAB loading crane, type 205-4 Year of manufacture 1992 Manufacturer's serial number 3183 Nodpjzzzy Esfx Agrsdb Several hydraulic extensions 4 hydraulic outriggers Winch Grapple Remote control including charger Concrete counterweights Tandem axle Loading platform with sideboards PTO drive / hydraulic supply Only the crane trailer with crane and the described accessories is being sold. The tractor shown in the pictures is not included in the offer and will not be sold. The crane trailer shows signs of use and wear corresponding to its age. The tires are partially significantly worn. The condition can be clearly seen in the pictures.

Condition: good (used), Shredding machine Rotor approx. 250 mm Hydraulic slide Feed opening approx. 600 x 800 mm Nedpoz Ea Tpefx Agrsdb Rotor length approx. 600 mm Motor 18.5 kW Functionality tested Technical data available upon request.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 15,000 h, functionality: fully functional, working width: 1,430 mm, type of input current: three-phase, total width: 5,000 mm, total length: 5,500 mm, total height: 2,100 mm, overall weight: 4,000 kg, input voltage: 380 V, Automatic flatbed die-cutting machine with sheet feeder, suitable for cardboard and corrugated board. The machine is fully operational and ready for production. Ndedpfxjzidbne Agreb The machine offers absolute safety for the operator. Maximum sheet size: 1030 × 1440 mm.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 480 h, workpiece length (max.): 3,715 mm, workpiece width (max.): 1,320 mm, workpiece height (max.): 180 mm, overall weight: 6,060 kg, spindle speed (max.): 24,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, The machine has 270 operating hours, almost like new; features laser positioning. Technical data: Brand: Busellato JET Master T 4 Technical specifications: - Machining area: 3715x1320 mm (X,Y) - Workpiece height: 180 mm - Motor power: 9.5 kW - Max spindle speed: 24,000 rpm - C axis: available - Drilling unit: 19 spindles - 1 sawing unit - 16-position plate tool magazine - 3-part safety mat - Automatic central lubrication Vacuum pump capacity (m3/h): 244/286 Payment in euros or forints, price is net. Machine new price: €125,675. Sale price: €47,500 +36-30-9198-716 Ndedpfx Aoxawlbogrob

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, planing width: 500 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 4,700 rpm, total length of planing tables: 800 mm, total width: 920 mm, total height: 1,140 mm, overall weight: 450 kg, VEBA S500 PLANER | 500 MM | 4 KNIVES | 4.3 kW | 2009 | ITALY | Professional VEBA S500 planer/thicknesser from the renowned Italian company VEBA Meccanica S.r.l. This machine is designed for the precise planing of wooden components to a specific thickness. Its robust, compact design and 4-knife cutterblock make it ideal for use in both carpentry workshops and for the production of solid wood components. Made in Italy, this machine is used and ready for operation. KEY FEATURES: - Renowned Italian brand VEBA - Model S500 - Planing width of 500 mm - 4-knife cutterblock - Traditional knives - Robust construction - 2 feed speeds - Material height range up to approx. 240 mm - Maximum planing depth of 8 mm - Table height adjustment - 2 rollers in the table to facilitate material feed - Machine equipped with CE marking - Year of manufacture 2009 TECHNICAL DATA: - Planing width: 500 mm - Work table dimensions: approx. 500 × 800 mm - Material height range: approx. 4–240 mm Ndjdpfx Asz A A Iwjgrjb - Maximum planing depth: 8 mm - Planing cutterblock: Ø 110 mm - Number of knives: 4 pcs - Type of knives: traditional - Cutterblock rotational speed: approx. 4700 rpm - Feed speed: 6.5 / 13 m/min - Table rollers: 2 pcs - Height adjustment: electric and mechanical MOTOR / POWER SUPPLY: Motor power: 4.3 kW Voltage: 400 V Power supply: 3 phases DIMENSIONS AND WEIGHT: Machine dimensions: approx. 1000 × 920 × 1140 mm Weight: 450 kg – according to the nameplate We invite you to test the machine on-site. Financing options available through leasing or installment plans. WE ORGANIZE TRANSPORT.

Condition: refurbished (used), Year of construction: 1993, machine/vehicle number: 20658, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 4,800 mm, table height: 980 mm, throat depth: 305 mm, ram plate length: 4,500 mm, distance table to ram: 500 mm, clearance between the columns: 3,760 mm, oil tank capacity: 350 l, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, overall weight: 22,500 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Ndodpjzktg Ajfx Agreb Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: ready for operation (used), Year of construction: 2007, Stiefelmayer Brivisor KL-4 Hardness Testing Machine Testing height: 150 mm (with testing table) Outreach: 200 mm Device footprint: 560 mm x 250 mm x 770 mm (W x D x H) Load range: 0.05 - 10 kgf Weight: approx. 45 kg Year of manufacture: 2007 Vickers: HV 0.1 | 0.3 | 0.5 | 1 | 2 | 3 | 5 | 10 Brinell: HBW 1/5 and HBW 1/10 You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Nsdpfxozzynhj Agrjdb Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the article may occur and are subject to change.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, operating hours: 16,381 h, Used AMADA press brake Model: HFT 130-4 Capacity: 4000 x 130T Ndodpoykyuzjfx Agrjb Number of axes: 4 Y1 Y2 X and R AMADA automatic table crowning CNC: CD2000 Axes retrofitted with new drive units New safety light curtains along entire length Fast working speed (laser): 100 mm/sec Clearance between uprights: 3,760 mm Total length: 5,480 mm Depth: 3,000 mm Height: 2,900 mm Weight: 11.5 tonnes Machine videos available on request.

Condition: used, mileage: 81,900 km, power: 55 kW (74.78 HP), first registration: 10/2016, fuel type: diesel, overall weight: 1,670 kg, next inspection (TÜV): 02/2027, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 4,063 mm, total width: 1,732 mm, total height: 1,448 mm, loading space length: 1,349 mm, loading space width: 960 mm, loading space height: 870 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Renault Clio 1.5 dCi Cargo with truck registration (N1) as a 4-door model with navigation system, automatic climate control, and cruise control. ? Second owner (reliable previous owners) ? Serviced according to manufacturer's specifications, service booklet available ? Last service performed on 07/2026 at 81,753 km DRIVER ASSISTANCE & SAFETY ? ABS ? ESP ? Cruise control ? Rear parking sensors ? Driver airbag ? Front passenger airbag ? Front passenger airbag can be deactivated ? Multiple airbags MULTIMEDIA & CONNECTIVITY ? Radio: Tuner ? USB (1x) ? Bluetooth audio ? SD card slot ? Bluetooth hands-free phone system ? Navigation system ? Touchscreen ? Bass-reflex speakers (front) COMFORT & INTERIOR ? Automatic climate control ? On-board computer ? Central locking with remote control ? Electric windows ? Electrically adjustable exterior mirrors ? 12-volt socket ? 2 seats ? Heated rear window DRIVE & TECHNOLOGY ? Emission standard Euro 6W ? Front-wheel drive ? Configuration 4x2 ? Engine start/stop function ? 5-speed manual transmission LIGHTING & VISIBILITY ? Automatic headlights BODY & CARGO AREA ? Partition grille Ndodpfx Agez Emuyerob ? Rear tailgate ? Cargo area floor: Plastic liner DIMENSIONS & WEIGHTS ? Wheelbase: 2,589 mm ? Variant: L1 ? Dimensions (cargo area/loading area) L × W × H: (1.35 x 1.13) × 0.96 × 0.87 m ? Cargo volume (in m³): approx. 1.1 m³ ? Dimensions (vehicle) L × W × H: 4,063 × 1,732 × 1,448 mm ? Permissible total weight: 1,670 kg ? Payload: 446 kg ? Towed load, braked (technically possible according to documents): 900 kg (no trailer hitch installed) ? Certificate of Conformity (COC) papers available ? Registered as a truck – N1 ? 1 vehicle key available ? VAT can be shown separately * We speak German and English. Greek / Ελληνικά: * We will assist you with all registration matters (including customs license plates and short-term license plates) and customs formalities. * Financing is possible at attractive conditions. * We would be happy to make you an offer to purchase your vehicle. * E-mail: * Web: ----Errors, typos, and prior sale are subject to change. All information is without guarantee.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 4,500 h, input voltage: 400 V, travel distance X-axis: 700 mm, number of slots in tool magazine: 21, controller manufacturer: fanuc, controller model: 31i model B5, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, spindle nose: BT 30 big plus, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FULL OPTIONAL TAPPING CENTER high torque/power version, complete with: Nedpfxouby Sxo Agredb spindle cone with BIG PLUS attachment FANUC DDR-T: continuous fourth axis (direct drive motor) with braked counter support and plate rotary joint for hydraulic feed to center table (for automatic workpiece clamping/unclamping) hydraulic power unit for workpiece clamping high-pressure refrigeration through the spindle chip conveyor evacuation automatic side poet robot interface tool setter RENISHAW TS-27 perfect machine with only 4,500 spindle hours!

Year of construction: 2019, condition: used, Five identical Farmet oil presses are offered. Max. throughput: 24kg seed/h, main drive: 4kW, machine dimensions X/Y/Z: 1700mm/1620mm/1530mm, weight: 235kg. Inspection by appointment is possible. Ndsdpfxjzww S Ao Agrjb

Condition: good (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: 3170, control type: manual, actuation type: electric, working width: 3,000 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, Only aluminum sheets, predominantly with a thickness of 2 mm, were used. The machine was used infrequently. Nedpfxjzk Ihno Agrodb

Condition: used, Year of construction: 2019, machine/vehicle number: 0191, For sale: Fenstek Emerald F260, a 4-axis CNC profile machining center from 2019, designed for the precise machining of long aluminum and plastic profiles. Thanks to its working range of up to 7,000 mm and the powerful 9 kW HSD spindle, this machine is particularly suitable for window, door, and facade production. The machine comes from a professional production environment, has been well maintained, is damage-free, and is fully operational. Inspection and a demonstration under power are possible. Key specifications: - Axes: X / Y / Z / A, 4-axis interpolation Njdox R U Eispfx Agrodb - Control: PA8000 - Spindle: HSD, 9 kW - Maximum speed: 24,000 rpm - A-axis rotation: +90° to -90° - Working range: up to 7,000 mm, depending on the clamping configuration - Tool magazine: ISO30, 9 positions - Operations: milling, drilling, tapping, grooving, and chamfering - Suitable materials: aluminum profiles, light alloys, and uPVC An interesting machine for companies that want to machine long profiles flexibly and in a single setup.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, pressing force: 630 t, table width: 2,500 mm, table length: 1,600 mm, overall weight: 100,000 kg, Equipment: safety light barrier, Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Ndodpfjv Hp T Uox Agreb Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 2008, For Sale: Ndjdpfjw Ebw Iex Agrob Very good condition. Industrie Rex I + spreading belts + hopper with oil lubrication 5/4 row range: 40 - 100 grams Siemens S7 program completely complete Videos available showing operation It is possible to inspect the machine at our location. If you have any questions or remarks, please feel free to contact us. Transport by arrangement Kind regards, Leo Holland

Condition: used, mileage: 599,000 km, power: 280 kW (380.69 HP), first registration: 08/2009, fuel type: diesel, overall weight: 31,850 kg, axle configuration: > 3 axles, color: orange, gearing type: automatic, emission class: euro5, total length: 9,700 mm, total width: 2,550 mm, Equipment: ABS, air conditioning, Engine and Transmission: * 12-liter diesel engine, 380 hp * Emission standard: Euro 5 * Scania Opticruise transmission * Transmission with range and split groups * Kick-down function * Auxiliary drive on the transmission * Exhaust brake, manual and automatic * Axles and Suspension: * Parabolic suspension, front * Air suspension, rear * Lift axle * Steerable front and rear axle * Differential lock * Rear axle ratio: 3.08 * Remote-controlled level adjustment * Display of rear axle load * Stabilizers on front and lift axle * Reinforced chassis frame ----Brakes and Safety: * Disc brakes * Electronic braking system * ABS/EBS * Trailer brake control * Reversing warning * Immobilizer * Speed limiter at 85 km/h ----Cab and Comfort: * Short CP cab for regional distribution * Low roof * Automatically controlled air conditioning * Electric windows * Central locking * Four keys or remote controls * Mechanical sunroof * Tinted windshield * Mechanically sprung cab * Adjustable steering column * Driver's seat with armrest and adjustable damping * Folding passenger seat * Storage compartments in the doors and on the rear wall Mirrors and Visibility: * Heated exterior mirrors * Electrically adjustable exterior mirrors * Wide-angle mirrors on driver and passenger side * Close-range mirrors * Front mirror * Headlight beam adjustment * Rear fog light * Reversing light * Preparation for rotating beacon ---- Njdpfoz Ena Dox Agrodb * Tire size, front: 385/55R22.5 * Tire size, rear: 315/70R22.5 * Fuel tank: 400 liters * AdBlue tank: 75 liters * Technically permissible total weight: 50,000 kg * Unladen weight: 16,755 kg * Permissible trailer load: 24,000 kg * Overall length: 9,700 mm * Wheelbase: 5,500 mm * Next inspection due: / ----Vehicle number: 12513----Subject to errors and prior sale----Advertisements and various markings have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport.----YOUR VTS TEAM

Condition: good (used), functionality: fully functional, Year of construction: 2012, Motorized Swivel Bending Machine Mfg. SCHRÖDER Type: MAK 4 EVO 3200/6.0 UD Year: 2012 Technical Data Manufacturer: SCHRÖDER Type: MAK 4 EVO 3200/6 UD Year of manufacture: 2012 Working length: 3200 mm Capacity: 6 mm Upper die stroke: 850 mm Upper die geometry: 180° Bending center adjustment: 100 mm Dimensions: approx. L 6.45 x W 2.65 x H 2.75 m Machine weight: approx. 20.6 t Accessory weight: approx. 3.4 t Equipment - Up’n Down bending die, automatically controlled by POS 3000 - Upper die tool clamping, hydraulic - Bending die tool clamping, hydraulic - Motorized central crowning - Motorized bending die adjustment, program-controlled Ndjdpezrvdgjfx Agreb - Bending center optimization via bending center adjustment - Foot switch - Protection of operation from the rear, controlled by a light curtain and safety PLC - Safety package EVOLUTION UD with tool changer incl. safety fence - Speed optimizer Z-axis drive (max. axis speed: 120 mm/s) Control system: POS 3000-3D graphic control View of product and machine in 3D – display Radius-Step-Bending function Stop system Positioning stop 10 - 3400 mm in U-shape with 4 sectors (850/1700/2550/3400), Panel for individual positioning of the control, pneumatic lowering of the stop fingers, steel balls in the support table. Angle stop left and right 1500 mm. The support plates are divided and can be removed individually to create the necessary space for existing counter-bends. - 2 pneumatically lowerable angle stops mounted on the frame - Front stop function of the bending die for accommodating bending rail finger segments incl. 2 finger segments matching the bending rail Fully automatic tool changer Tool changing portal for upper die tools with hydraulic tool clamping (total 7 axes) for maximum upper die tool height of 400 mm, two asynchronously movable tool changers each with three gripping units Upper die tool Tools WZS 2000, approx. 1000 N/mm2 tensile strength • Tool set for automatic tool changer, upper die Goosefoot set h= 180 mm incl. corner pieces left and right. Bending die tools Tool system for the bending die WZS 3000, approx. 1000 N/mm2 tensile strength Bending rail "A", segmented, stepped, b= 15 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm Bending rail "A", segmented, stepped, b= 20 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 20 mm •Bending rail "A", segmented, b= 30 mm h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 30 mm Lower die tools Lower die rail with recesses segmented, same radius as upper die tool b= 117 mm h= 40 mm Total length 3.240 mm, divided into 4 x 500, 2 x 620 mm All information is without guarantee. A demonstration under power is possible at any time by arrangement.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 2 x furnaces (same type) are available. (Please submit your offer price) Sale only within Europe, including Turkey. Price excluding packaging; delivery condition: FCA (machine location). ===== For technical data, please refer to the handout. Any warranty rights are excluded. We do not assume any liability for the accuracy of technical data or year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stated in accident prevention regulations. No sales to private individuals. Nodsy I A Dnspfx Agrjdb

Condition: good (used), Year of construction: 2000, Technical data: Nodpfx Asz A Ifzegredb Maximum cutting width: 8100 mm Maximum cutting capacity for St40 steel: 4.0 mm Control system: ELGO Motor-adjustable rear gauge: 10-1000 mm Motor-adjustable cutting angle Motor power: 15 kW Dimensions (length x width x height): approx. 9450 x 2900 x 2950 mm Weight: approx. 36 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.