Used Handtmann Rf-440 Rundformer for sale (4,248)

Condition: new, mileage: 100 km, fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, color: yellow, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Equipment list WHEELBASE 5500 MM AIR INTAKE, CORNER-MOUNTED, INTEGRATED IN CAB WATER PUMP, REGULATED INSECT PROTECTION GRILLE, IN FRONT OF RADIATOR HIGH PERFORMANCE ENGINE BRAKE AIR COMPRESSOR, TWO-STAGE, SWITCHABLE FRAME, SCREWED FRAME OVERHANG 1350 MM ADBLUE TANK 75L, LEFT TANKS, LOCKABLE PROTECTIVE CAP FOR ADBLUE DOSING SYSTEM TANK CROSS-SECTION, NARROW TANK CROSS-SECTION, LOW EXHAUST SYSTEM, TAILPIPE TO THE RIGHT OUTSIDE EXHAUST BOX FENDER, FRONT, RIVETED, AERODYNAMICALLY OPTIMIZED FENDER, FOR CHASSIS EXTENSION SPLASH GUARD (EC), FRONT FRONT UNDERRUN PROTECTION (ECE), ALUMINUM BUMPER, CORNERS MADE OF PLASTIC BUMPER, CENTER SECTION WITH TOWING EYE BRAKE SYSTEM CAB TILT MECHANISM, MECHANICAL-HYDRAULIC WINDSCREEN TINTED, WITH BAND FILTER LIGHT SENSOR RAIN SENSOR STORAGE COMPARTMENT, LEFT BELOW CAB ENTRY, LACKED DOOR EXTENSION CAB ENTRY LEFT/RIGHT, FIXED FRONT MIRROR, HEATED MIRRORCAM SUN VISOR, EXTERIOR, TRANSPARENT A-PILLAR TRIM, AERODYNAMICALLY OPTIMIZED OMISSION OF WIND DEFLECTORS AIR HORN, CAB ROOF CLOSING SYSTEM, WITH CENTRAL LOCKING COMFORT CLOSING SYSTEM CAB INTERIOR DRIVER'S AIR-SUSPENDED SEAT, CLIMATE-CONTROLLED PASSENGER FUNCTIONAL SEAT SEAT BACK, UNLOCKING, DRIVER'S SEAT ARMRESTS, ON BOTH SIDES, PASSENGER SEAT SEAT BELT WARNING SEAT COVER, DINAMICA, BLACK, DRIVER'S SEAT SEAT COVER, DINAMICA, BLACK, PASSENGER SEAT SEAT BOX LOW, LOWERED BY 40 MM COMFORT BED, LOWER MATTRESS TOPPER FOR COMFORT BED, LOWER MATTRESS, EXTRA PREMIUM COMFORT, LOWER PREPARATION COMFORT BED, UPPER, WIDE LEATHER STEERING WHEEL AIRBAG, DRIVER FLOOR MAT, ENGINE TUNNEL THE SUNBLIND, 1-PART, ELECTRIC WINDSCREEN BLIND, ACROSS IN FRONT OF BED (EN) SUNBLIND, SIDE, DRIVER AND PASSENGER SIDE REAR VIEW CAMERA, TRACTOR UNIT TACHOGRAPH MANUFACTURER VDO MULTIMEDIA COCKPIT INTERACTIVE 2 PREPARATION REMOTE TRUCK 3.0 APP DIGITAL RADIO J2J SOUND SYSTEM NAVIGATION SYSTEM INTERFACE, FLEET MANAGEMENT SYSTEM EMS REMOTE UPDATE OF DRIVER ASSISTANCE MAP PREREQUISITE FLEETBOARD MANAGER APP PREPARATION FOR WALL FIXING SOCKET 24 V/15 A, REAR SEAT PREPARATION FOR ELECTRICAL EQUIPMENT LED AMBIENT LIGHTING, DRIVING AND LIVING 2 LED WORK LIGHTS, SWAN NECK AUXILIARY HEATER, HOT WATER CAB NOISE AND HEAT INSULATION ELECTRIC STAND-ALONE AIR CONDITIONING SYSTEM CLIMATE CONTROL STORAGE COMPARTMENTS, ABOVE WINDSCREEN, ONE LOCKABLE STORAGE COMPARTMENT COVER, DRIVER AND PASSENGER SIDE DRAWERS, UNDER BED DRAWER, UNDER BULKHEAD SHELVING SYSTEM, FLEXIBLE, FOR STORAGE ABOVE WINDSCREEN TABLE, ON PASSENGER SIDE Y1T NOTEBOOK HOLDER REFRIGERATOR, IN DRAWER, UNDER BED THE COMPRESSED AIR CONNECTION, IN THE CAB ELECTRIC / ELECTRONICS CABLE REMOTE CONTROL FOR AIR SUSPENSION PREPARATION SWITCH, LIFT AXLE, SEMI-TRAILER/ TRAILER PSM 2ND GENERATION E4C ADDITIONAL FUNCTIONS, FOR BODY MANUFACTURER TRAILER SOCKET 24 V, 15-PIN LED DAYTIME RUNNING LIGHT LED HEADLIGHTS INTELLIGENT LIGHT FOG LIGHTS LED PREPARATION, HEADLIGHTS ADDITIONAL, ROOF REAR LIGHTING HARNESS, EXTENDED LED REAR LIGHTS PREPARATION, WORK LIGHTS, CAB REAR LED SIDE MARKER LIGHTS SIDE MARKER LIGHTS, BLINKING PREPARATION ALL-ROUND ROTATING BEACON LED BLINKERS IN LIGHT SIGNATURE PHOTO MERCEDES STAR, ILLUMINATED LIGHTING REGULATION SPEED LIMITER 90 KM/H / 56 MPH, ECE GOT PREDICTIVE POWERTRAIN CONTROL J7V DRIVER ASSISTANCE ATTENTION ASSIST S10 TRAFFIC SIGN RECOGNITION ACTIVE BRAKE ASSIST 6 ACTIVE SIDEGUARD ASSIST 2 FRONTGUARD ASSIST Ibedpfx Ajz Sipijn Isc

Condition: used, mileage: 1,800 km, first registration: 04/2020, overall weight: 9,000 kg, axle configuration: 2 axles, These front-mounted sweepers can be operated via the front PTO shaft. Of course, we can also accommodate your specific requirements, special requests, and additional optional equipment. The brush shafts are equipped as standard with alternating plastic and wave wire discs to achieve the best possible sweeping performance, even with heavy and stubborn dirt. Isdpfoz Ta Rxsx An Isbc ? Dücker FKM 2400 ? With municipal mounting plate receiver ? Implement plate size 3 and 5 ? Very little use, always stored in a shed ? Working width 0°. 2,400 mm ? Working width 15° 2,300 mm ? Working width 30° 2,075 mm ? Sweeper roller diameter: 600 mm ? Hydraulically raise/lower ? Hydraulically swivel right/left ? 2x water tank ? Water spray ? Support wheels ? Support Manufactured with a stable, torsion-resistant housing with double-walled construction. The sweeping roller is suspended and adjustable in height, with stepless adjustment, and consists of disc brushes in plastic/wave wire, 600 mm Ø, with heavy-duty wheels 250 mm Ø directly attached to the housing. Working width: 2.4 m Overall width: 2.65 m Sweeper roller diameter: 600 mm Lifting device for front quick-change system: Implement plate size 3 or 5, including cylinder Drive, hydraulic, minimum oil flow at 180 bar: 40 l/min Weight: 580 kg Additionally with: Hydraulic tilting of the brush right/left Water spray device in front of the brush Boundary lights LED and warning flags Changeover valve, electric Financing is possible through our partner banks; we will gladly assist you. We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is without guarantee. Subject to change, prior sale, or errors. We strongly recommend and encourage an inspection and examination so that the buyer does not have any false expectations regarding the condition and suitability. Inspections and examinations are possible at any time by prior arrangement and are expressly desired.

Condition: used, Part suitable for: trucks Ibodjzu Stpspfx An Isc Price: On request VAT/differential taxation: VAT deductible

Condition: good (used), machine/vehicle number: 3688, Year of construction: 2012, load capacity: 12,000 kg, lifting height: 16,200 mm, mast type: telescopic, total length: 11,200 mm, total width: 4,100 mm, operation weight: 40,200 kg, additional equipment features: Front mud guards, Centralized greasing system, Automatic Greasing System for spreader and inner boom, Dual tread, Equipment: lighting, Kalmar DRF100-54S6 from Uniktruck Wheel type – Drive wheel: Pneumatic Isdpfx Ajzupq Ssn Ijbc Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 14.00-24 Wheel size – Load wheel: 14.00-24

Condition: good (used), machine/vehicle number: 3261, Year of construction: 2012, load capacity: 45,000 kg, lifting height: 15,000 mm, mast type: telescopic, total length: 11,600 mm, total width: 4,180 mm, operation weight: 82,000 kg, additional equipment features: Dual tread, Centralized greasing system, Automatic Greasing System for spreader and inner boom, Hydraulic sliding cabin, Equipment: lighting, Kalmar DRF450-65C5X from Uniktruck Wheel type – Drive wheel: Pneumatic - Dual mounting Ibjdpfx Asyuh Uwjn Ijc Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 18.00-33 Wheel size – Steering wheel: 18.00-33

Condition: used, mileage: 231,000 km, power: 130 kW (176.75 HP), first registration: 08/2021, fuel type: diesel, empty load weight: 2,300 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 5,986 mm, construction height: 2,590 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking heater, sliding door, soot filter, traction control, trailer coupling, AUTOPARADIES in Berlin, Frank-Zappa-Str. 9A Mon-Fri 9:00 AM - 5:00 PM Sat 10:00 AM - 1:00 PM Tel: Mobile/WhatsApp: VEHICLE FINANCING & TRADE-INS POSSIBLE Timing belt replaced in 2025 at MAN at 194,000 km * LED headlights * Sliding door on both sides * AIR CONDITIONING * Rearview camera * Suspension seat with massage function and 2 armrests (ErgoActive) * ONBOARD COMPUTER * DAB radio * Radio with Apple CarPlay and Android Auto * Webasto auxiliary heater with remote control * Bluetooth hands-free system * Exterior mirrors, electric * Power windows * 3-seater truck (all with 3-point seat belts) * Cargo area lined Ibodpfxoz S U Ntj An Ijc * DPF - EURO 6 * Electronic immobilizer * Trailer hitch 3000KG * Permissible total weight 3500KG Vehicle is in well-maintained condition. Please schedule a test drive appointment by phone. Subject to prior sale and errors. Call us!! We speak English. Financing, Trade-ins, You can find more offers on our website. The information provided in advertisements, on the internet, on price tags, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller also assumes no liability for errors arising from typing, spelling, and data transmission errors. Listed equipment may need to be checked separately. Please understand that, although the technical and visual condition of this vehicle is good, we prefer to sell it to commercial businesses or for export, excluding any warranty, due to its age and mileage. Thank you very much! The vehicle description serves only to generally identify the vehicle and does not constitute a guarantee in the legal sense of the purchase contract. The information does not claim to be complete and does not constitute a guaranteed characteristic within the meaning of § 434 BGB, paragraph 1, sentence 3. Errors and prior sale are reserved.

Condition: new, For sale: High-quality steel compensating hose (Ringwellschlauch) made of stainless steel, designed for industrial applications. This component is used to compensate for vibrations, thermal expansions, and stresses in piping systems. Ideal for installations: - industrial - heating - gas - water - process/technological ⚙️ Technical data Type: SP20 Nominal diameter: DN100 Isdoz Smkkopfx An Iobc Length: 1000 mm Pressure: PN10 Material: stainless steel 1.4404 (INOX) Standard: ISO 10380 / DIN 3384 Designation: BOA-MS (10/2022) Connections: pipe ends for welding Braid: reinforced stainless steel braid ✅ Advantages ✔ corrosion resistance ✔ high durability and flexibility ✔ vibration and noise damping ✔ compensation of thermal expansion ✔ industrial-grade product – robust construction

Condition: used, mileage: 123,837 km, power: 107 kW (145.48 HP), first registration: 06/2021, fuel type: diesel, wheelbase: 3,670 mm, fuel: diesel, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 5,900 mm, total width: 2,070 mm, total height: 3,400 mm, Year of construction: 2021, Equipment: air conditioning, central locking, cruise control, power assisted steering, power mirror, start-stop system, trailer coupling, = Additional Options and Accessories = - 12-volt socket - Driver airbag - Remote central locking - Radio/CD player - Radio with MP3 support - Rearview camera = Additional Information = Number of cylinders: 4 Engine displacement: 2,299 cc Unladen weight: 2,821 kg Ibedpfx Aoz Rvq Nsn Ijc Payload: 679 kg Gross vehicle weight (GVW): 3,500 kg Body manufacturer: France elevateur 121 FT APK (technical inspection): valid until 06/2027 Registration number: 987021 Manufacturer: RG Waalwijk Havenweg 15 5145NJ WAALWIJK, NL robert.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, control type: CNC control, sheet thickness (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, table length: 3,000 mm, table height: 860 mm, input voltage: 400 V, overall weight: 6,100 kg, total length: 3,790 mm, total width: 2,230 mm, total height: 1,860 mm, operating pressure: 315 bar, back gauge: 1,020 mm, oil tank capacity: 100 l, number of support arms: 3, back gauge adjustment: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Amada sheet metal shear GXII 630 The Amada GXII 630 is a series of high-quality, hydraulic CNC sheet metal shears for precise cutting of sheet metal. This machine is in exceptionally good condition and has minimal operating hours. * Automatic adjustment of cutting clearance * Automatic adjustment of cutting angle * Motorized back gauge, CNC controlled * 3 front gauges * Angular front gauge * Safety guard on the rear of the machine * Sheet support system * CE certified Specifications Force (kN) 197 Cutting length (mm) 3050 mm Maximum speed (cuts/min) 33 Ibodpfx Anjz Rn Hve Ioc Material thickness (max.): Steel (mm) 6.35 Stainless steel (mm) 4 Aluminum (mm) 8 Machine dimensions: Length (mm) 3790 Width (mm) 2250 Height (mm) 1866 Weight (kg) 6150 Machine will be disassembled and loaded.

Year of construction: 2026, condition: new, Complete - turnkey roll forming line for perforated scaffolding plank production with high precision and automation. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. This scaffolding plank roll forming line is designed for the production of perforated steel planks used in scaffolding systems and construction applications. The system provides a complete turnkey solution from coil feeding to finished plank output. Engineered for continuous industrial production, the line ensures high precision forming, consistent perforation quality and reliable long-term operation. PRODUCTION CAPABILITY The system is designed to produce: Perforated scaffolding planks Anti-slip plank surfaces Different plank widths and lengths (customizable) LINE CONFIGURATION The production line consists of: Decoiler Straightener Servo Feeder Mechanical Press Perforating & Embossing Tool / Die System Roll Forming Machine (multi-station design) Cutting System Conveyor & Stacking System ENGINEERING FEATURES High precision perforation and embossing system Servo-controlled feeding for accurate punching Multi-station roll forming structure for stable shaping Heavy-duty machine frame for continuous operation Modular and customizable design PLC & HMI controlled automation system OPERATIONAL ADVANTAGES Turnkey production solution High efficiency and production speed Consistent product quality Flexible production for different plank designs Short lead time compared to European manufacturers APPLICATION AREAS Construction industry Scaffolding system manufacturers Industrial platform production Infrastructure projects Ijdpfx Anjyzfyfo Iebc REFERENCE PROJECTS Images included in this listing show reference installations of scaffolding plank production lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references and technical details can be provided upon request. THE LINES THAT WE ARE EXPERIENCED: Guard Rail Production Lines C, U, Z, And Solar Panel Profile Production Line Logistic Warehouse Traverse Production Line Cable Tray Production Line Market Shelving Production Line Suspended Metal Ceiling Production Line Solar Framing And Racking Production Line Lighting Fixture Body And Lid Production Line Panel Radiator Top And Side Cover Production Line Metal Grid And Planks Production Line Metal Door And Door Frame Production Line PVC Window Gypsum Board Profile Production Line Agriculture And Animal Husbandry Practices Agricultural Vehicle Applications Painting Plant Panel Production Line Automotive Industry Applications Coil Punching Application Household Appliances Industry Applications

Condition: used, Year of construction: 2020, 4 x 250 kg wheel weights, including 2 mounting plates for 10-hole rims, part number 4290866. Ibjdpfez R Uvrex An Iec

Condition: used, Thermo Fisher Scientific Thermo Fisher Scientific Flash 2000 Ibodey D Sqvspfx An Isc CHNS O Analyzer with 2 x AI AS 1310 Autosamplers For sale is a used Thermo Fisher Scientific Flash 2000 elemental analyzer. The unit is equipped with two AI AS 1310 autosamplers. It is designed for automated laboratory operation. The system is used for elemental analysis in the laboratory. Sample introduction is performed via the installed autosamplers. This enables continuous and automated operation. Equipment and features: Thermo Fisher Scientific Flash 2000 CHNS O Analyzer 2 x AI AS 1310 Autosamplers Front display with status fields for operating states Gas connections for He and O2 RS232 interfaces and other device interfaces Connections for autosamplers and additional modules Power connection 230 V Accessories and parts as shown in the pictures Technical data: Manufacturer: Thermo Fisher Scientific Model: Flash 2000 Voltage: 230 V AC Frequency: 50-60 Hz Fuse: 2 x 6 A Power: 1400 VA Autosampler: Model: AI AS 1310 Supply: 24 V DC Power: 46 W per unit Serial numbers: 420126446 and 420126487 Dimensions (approx.): Main unit: Width approx. 55 to 60 cm Depth approx. 55 to 65 cm Height approx. 50 to 60 cm Overall width with 2 autosamplers approx. 100 to 120 cm Weight (approx.): Main unit: approx. 45 to 60 kg Autosampler: approx. 8 to 12 kg each Total: approx. 60 to 80 kg Condition: Used, with typical signs of wear and tear due to age and use. The condition corresponds to the pictures. Scope of delivery: Flash 2000 Analyzer 2 x Autosamplers Accessories and cables as shown in the pictures Important note: All information has been provided to the best of our knowledge, based on the pictures, nameplates, and manufacturer information. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, New: Yes Year of construction: 2024 Ijdpfx Asz S Hdpsn Iobc Length: 150 cm

Condition: used, functionality: fully functional, machine/vehicle number: H2X3886E55171, Year of construction: 2014, operating hours: 877 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, empty load weight: 3,024 kg, drive type: Elektro, Electric four-wheel forklift Chassis number: H2X3886E55171 Isdpfxszt Drbe An Ijbc Mast type: Duplex Technical condition: normal Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 60 - 80% Battery type: PzS Description: German Linde E16P-02 No.: R0808 Year of manufacture: 2014 Operating hours: 877 Drive: Electric Lifting capacity: 1,600 kg Lifting height: not specified Overall height: 2,160 mm Mast: Duplex Chassis number: H2X3886E55171 Battery: PzS, further details not specified Tires: solid rubber front approx. 80–100 %, superelastic rear approx. 60–80 % Equipment: Side shift, third and fourth hydraulic valve, front work lights and interior mirror. Charger: not included Condition / known defect: The lifting function of the forklift is currently not operational. According to our current assessment, the cause is a defect in the valve block. However, we do not guarantee this assessment and cannot rule out that there may be additional causes. All other functions of the machine are currently operational. Due to the defective lifting function, the machine is particularly recommended for repair projects or buyers with appropriate technical experience. Sold in its current condition. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Side shift, 3rd valve, 4th valve, front work lights, interior mirror.

Condition: used, mileage: 893,151 km, power: 324 kW (440.52 HP), first registration: 03/2016, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,580 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 3,580 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, tachograph, traction control, = Additional Options and Accessories = - 2nd Diesel tank - Heated mirrors - Digital tachograph - Fixed - Halogen lamp - Manual - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 7671 kg, Gross vehicle weight: 20500 kg, Total tank capacity: 1160 liters, 2nd Diesel tank, Height of fifth wheel coupling: 112 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 358 tons, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: Red, Heated mirrors, Type of lighting: Halogen lamp, Lane departure warning system, Climate control, Engine power: 324 kW (434 hp), Engine displacement: 12419 cc, Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: ZF, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 3 mm; Tire tread depth right: 3 mm; Suspension: Leaf suspension Axle 2: Double tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 5 mm; Tire tread depth right outer: 6 mm; Suspension: Air suspension Weights Unladen weight: 7,671 kg Payload: 12,829 kg GVW: 20,500 kg Maintenance APK (technical inspection): valid until 05.2027 Ibedpezqzilefx An Ijc Condition General condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 2 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: good (used), mileage: 827,075 km, power: 324 kW (440.52 HP), first registration: 04/2009, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 5,100 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 16, emission class: euro4, suspension: steel-air, total length: 11,200 mm, total width: 2,550 mm, total height: 3,620 mm, loading space length: 8,400 mm, loading space width: 2,480 mm, loading space height: 2,180 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, tachograph, tail-lift, traction control, = Additional Options and Accessories = - 2nd Diesel tank - Heated mirrors - Digital tachograph - Fixed - Halogen lamp - High roof Ibodpfx Anjzm I Rho Iec - Tail lift - Manual - Auxiliary drive - Radio/cassette - Fabric = Notes = Number of axles: 3, Configuration: 6x2, Unladen weight: 13620 kg, Gross vehicle weight: 28000 kg, Total tank capacity: 1240 liters, 2nd Diesel tank, Fifth wheel coupling: Fixed, Winch capacity: 362 tons, Suspension type: Air suspension, Type of cab: High roof, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Climate control, Seat heating, Engine power: 324 kW (434 hp), Fuel: Diesel, Euro: 4, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 16, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Load capacity of tail lift: 1500 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Aluminum, Tail lift size: 161 x 253, Spare wheel, Tread depth spare wheel: 12% = Further Information = Transmission Transmission: ZF, 16 gears, Automatic Axle Configuration Tire size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 13 mm; Tire tread depth right: 6 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inside: 7 mm; Tire tread depth left outside: 6 mm; Tire tread depth right inside: 7 mm; Tire tread depth right outside: 8 mm; Suspension: Air suspension Axle 3: Lift axle; Steered; Tire tread depth left: 13 mm; Tire tread depth right: 13 mm; Suspension: Air suspension Weights Unladen weight: 13,620 kg Payload: 14,380 kg GVW: 28,000 kg Functional Tail lift: Dhollandia, Rear door, 1500 kg Height of loading area: 129 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing inventory of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The assurance of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, New: No Ibodpez S Ehgofx An Iec Year of construction: 2010

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Pfaff Creative Icon 2” sewing machine Items for sale: 1x Pfaff Creative Icon 2 with the following accessories: incl. additional embroidery module or embroidery unit incl. ‘Grand Endless Hoop’ fabric or embroidery material incl. embroidery hoop or embroidery accessories Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A video recording of a functional test will be made for you prior to dispatch or collection. For further information, please feel free to contact us directly. Ibedpfx Anoz Sx Rus Isc

Condition: good (used), mileage: 523,433 km, power: 338 kW (459.55 HP), first registration: 12/2020, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,200 mm, total width: 2,550 mm, total height: 3,550 mm, Equipment: ABS, Bluetooth, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, tachograph, traction control, - Heated mirrors - Digital tachograph - Fixed - Hydraulic system - LED lamp - Manual - Auxiliary drive - Pump - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric - Blind spot sensor - Auxiliary braking system Number of axles: 2, Configuration: 4x2, Tare weight: 6865 kg, Gross vehicle weight: 20000 kg, Total fuel tank capacity: 390 liters, Saddle coupling height: 132 cm, Saddle coupling: Fixed, Number of locks: 1, Winch pulling capacity: 355 tons, Suspension type: Air suspension, Cabin type: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Number of airbags: 1, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Blue, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Seat heating, Bluetooth, Blind spot sensor, Engine power: 338 kW (453 Hp), Displacement: 11120 cc, Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Auxiliary braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, INTARDER // PTO + HYDRAULICS // FROM 1ST GERMAN OWNER Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Brakes: Disc brakes Ibsdpfx Ansz S Txmo Ioc Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 6 mm; Tire tread depth right: 7 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/80R22.5; Double tires; Tire tread depth left inner: 7 mm; Tire tread depth left outer: 13 mm; Tire tread depth right inner: 12 mm; Tire tread depth right outer: 14 mm; Suspension: Air suspension Weights Unladen weight: 6,865 kg Payload: 13,135 kg GVW: 20,000 kg Functional Pump: Yes Maintenance APK (technical inspection): Valid until 01.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: 532 € per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simply! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: new, Balance Systems Digital Interface Balancer 9SHVM2512B N220, circuit board, serial number B803704, unused, 100% functional, scope of delivery as shown in the photos. Ijdpoi D T Dgjfx An Iebc

Condition: used, mileage: 136,518 km, power: 324 kW (440.52 HP), first registration: 09/2014, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 8x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 400 l, color: white, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: steel-air, Equipment: air conditioning, crane, electric window regulation, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Drivetrain Drive: Wheel Make of engine: MAN Ibjdpfxox E Ukbe An Ijc Transmission Transmission: ZF 16S, 16 gears, Manual gearbox Axle configuration Axle 1: Tyre size: 385/55R22,5; Suspension: leaf suspension Axle 2: Tyre size: 315/70R22,5; Double wheels; Suspension: air suspension Axle 3: Tyre size: 315/70R22,5; Double wheels; Suspension: air suspension Axle 4: Tyre size: 385/55R22,5; Steering; Suspension: air suspension Weights Empty weight: 16.300 kg Carrying capacity: 15.700 kg GVW: 32.000 kg Functional Mast: telescopic (4 parts) Make of bodywork: PALFINGER PK 33002 EH = Additional options and accessories = - PTO - Tipper hydraulics

Condition: used, mileage: 91,000 km, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,500 mm, loading space height: 2,370 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, spoiler, tail-lift, Year of manufacture: 2021 Year of construction: 2021 Front axle: Steering; Tyre profile left: 90%; Tyre profile right: 90% Rear axle: Double wheels; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90% Empty weight: 4.358 kg Carrying capacity: 3.132 kg GVW: 7.500 kg Tail lift: tail lift, 1000 kg Price: On request = Additional options and accessories = Iedpfozxpdmjx An Isbc - 3 Seats - Airbag - Immobiliser - Radio - Roof spoiler - Suspension seat - Toolbox

Condition: new, Heidenhain IBV 650 interface, part number 277 236-71, serial number 8533724, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. Iedpfx Aoi Eai Djn Ijbc

Condition: ready for operation (used), Mitsubishi HA33C-S synchronous servo motor, serial number: M54644060 + Tamagawa OSE 12.5KN-6-12-0 rotary encoder, serial number: 7945T, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Ijdpfx Aei D I N Usn Ijbc

Condition: ready for operation (used), Siemens 6FX1121-4BG01 servo interface, condition E, serial number 4215, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ijdpfei Ed Rcex An Iobc