Used Hex Bolts M20, Din 931, 514 Kg for sale (67,220)

Condition: good (used), Year of construction: 2011, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 643 m³/h, Good day, We hereby offer, subject to prior sale, a used baler including conveyor belt, wire tying stations, and bale chute from the manufacturer HSM GmbH + Co. KG, model VK 8818 FU. The following technical specifications were taken from the manufacturer's operating manual and brochures; we do not assume any liability for the correctness or completeness of this information. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Baler dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H) Overall installation dimensions with conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used in a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced with a new, larger press in May/June 2026. Until then, the machine can be inspected in operation with material. We would be pleased if this baler is of interest to you. Your Mertens & Frowein GmbH service team Iisdpfxeymmtcj Apcoa

Year of construction: 2019, condition: ready for operation (used), A mixing vessel KG Bremen and two stirrers PRG and IKA are available. 1) Mixing vessel KG Bremen, year of manufacture: 2019, max. operating pressure: atmospheric, max. operating temperature: 80°C, volume: 1150L, max. double-jacket operating overpressure: 5bar, max. double-jacket operating temperature: 80°C, material: 1.4301. 2) Precision stirrer PRG R112M-6, year of manufacture: 2004, agitator length: 930mm, impeller diameter: 160mm. 3) Precision stirrer IKA RF 04-T-1085, year of manufacture: 1999, total length: 1100mm, impeller diameter 1/2: 160mm/200mm. An on-site inspection is possible. Iiedoxhntrspfx Apcsa

Condition: like new (used), functionality: not functional, load capacity: 6,500 kg, Load capacity 6500 kg Please note: Arm diameter adjustable from 1880 mm to 4550 mm (swivel-out) Space-saving and continuously adjustable, the extension arms can be locked in place Iedpfex Thucex Apceia Speed continuously adjustable from 0.001 to 5 rpm Motor power 3 kW Torque 15000 Nm Height 800 mm Maximum current transmission 2000 A Weight 4700 kg with hand and double-foot remote control CE certificate, declaration of conformity, documentation, circuit diagram with original 2016 quotation invoice Current new price approx. €28,000

Condition: excellent (used), For sale: a complete set of SK40 tool holders in Ø10 size, brands HOLEX and Orion. Manufactured according to DIN 69871 AD/B, suitable for professional CNC machining centers. Technical data: • Taper: SK40 • Clamping: Ø10 mm • Standard: DIN 69871 AD/B • Manufacturers: HOLEX, Orion • Condition: used, fully functional, in good technical condition (visible signs of use). Applications: • End mills Ø10 • Drills Ø10 • Counterbores Ø10 Ijdpsxcy S Ajfx Apcoia

Condition: excellent (used), For sale: Professional tool holder SK40-12×50-K, compliant with DIN 69871 AD/B. Each holder is fitted with a mounted end mill (visible in the photos). Mounting type: SK40 Sleeve: Ø12 mm Grip length: 50 mm Iisdpfxsxcg H Ho Apcja Standard: DIN 69871 AD/B Condition: used, fully functional, ready for operation Please note that several units are available, all in the same Ø12×50 size.

Condition: excellent (used), For sale: professional milling tool holders from the brands HOLEX (Hoffmann Group) and ORION. • Type SK40 Ø6-50 (Weldon – side screw) • Standard DIN 69871 AD – central cooling through spindle • Clamping diameter: Ø6 mm • Length: 50 mm • Balancing G 6.3 – up to 12,000 rpm (HOLEX) • Very good condition, used – fully operational • Some holders are sold with milling cutters/drills included. Ijdpfjxcgzdsx Apcoia

Condition: excellent (used), For sale: professional ORION milling toolholder – German quality and precision. • Type SK40 Ø10-100 (Weldon) • Standard DIN 69871 AD/B – spindle-through coolant • Total length 100 mm • Tool clamping for Ø10 mm (side screw) • Includes tool – milling cutter / drill bit (visible in photo) • Very good condition, used, fully functional. ORION toolholders are an ideal solution for CNC machining centres and milling machines with SK40 taper. Iedpfx Aexcgytjpceia

Condition: excellent (used), For sale: professional ORION milling holder – German precision and top-quality workmanship. • Type SK40 Ø8-100 K • DIN 69871 AD/B standard – central coolant supply through the spindle • Weldon clamping (side screw) for Ø8 mm tools • Total length 100 mm • Very good condition, used – fully functional • Complete with tool (milling cutter / drill as shown in the photo) Ideal for CNC machining centers and milling machines with SK40 taper. Isdpsxcgygofx Apceia

Condition: used, Year of construction: 2015, Recycling system for recovering and separating plastic and rubber products from textile reinforcements, such as various types of rubber hoses, PVC, tarpaulins, banners and other plastic materials in which textile reinforcement occurs. Ijdpfx Aswpkw Ejpcsia The system cooperates with a granulation group and a separation system. Hourly capacity: 50 - 80 kg/h Infeed dimensions: 270 x 120 mm + fi 80 mm Blade length: 3x2 + 2x2 Rotor diameter: 250 mm Cutting length: 600 mm Engine power: 22 kW Dimensions: 3200 x 3000 mm Height: 2500 mm Weight: 1000 kg Year of production: 2015 Technical condition: used machine, all engines in working order. No top cap with dimensions: 400x300 mm used for loading the product. Full and original technical documentation available. .

Condition: good (used), Year of construction: 2010, functionality: fully functional, For sale: HEX-TECH DEX 200 single screw extruder in good condition, industrial design, offered as a complete system. The machine is primarly used for feed and pellet production but it's also suitable for plastics processing applications. Iedeylhr Ropfx Apcoia

Condition: used, Year of construction: 2000, machine/vehicle number: P18096N, functionality: fully functional, pressing force: 20 t, stroke length: 160 mm, total height: 2,150 mm, overall weight: 180 kg, Good day, We hereby offer you, without obligation, a used workshop press from Rodcraft, model WP 20F. Manufacturer: Rodcraft Pneumatic Tools GmbH & Co. KG Model: WP 20 F Year of manufacture: 2000 Machine No.: P18096N Hydraulic stroke: 160 mm Pressing force: 20 t Machine dimensions: 2150 x 960 x 660 mm Transport dimensions: 2150 x 980 x 750 mm Machine weight: 180 kg Note: The above technical data has been taken from the manufacturer’s brochures or other sources, for which we cannot guarantee the accuracy or completeness. Scope of delivery: 1 unit used workshop press Rodcraft, type WP 20F Application area and condition: The machine was occasionally used in an industrial metalworking shop for pressing out bearings, etc. The machine is fully functional and in good condition. We would be pleased if this machine is of interest to you. Iiodpfx Apoygm N Decoa Your service team at Mertens & Frowein GmbH

Condition: excellent (used), Bezel (28388) SPH 360 mm Ijdpfemkfd Sex Apceia Weight 37 kg Dimensions, see drawing

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Iiodou Tha Iepfx Apcea Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Iiedpfsu Thh Eox Apcoa Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. On site viewing and inspection recommended Iedpfx Apsx R Uzdjcjia

Condition: used, machine/vehicle number: 8FBM20T-16749, Year of construction: 2022, operating hours: 744 h, lifting height: 4,750 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 2.000 kg Maximum passing height: 214 cm Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.5x1.15x2.13 Please contact PFEIFER GROUP for more information Iisdpfx Apstr Hzrjcja

Condition: used, machine/vehicle number: 8FBM20T-16747, Year of construction: 2022, operating hours: 887 h, lifting height: 4,750 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 2.000 kg Maximum passing height: 214 cm Iiodjtr Hmajpfx Apcea Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.5x1.15x2.13 Please contact PFEIFER GROUP for more information

Condition: used, machine/vehicle number: 8FBM20T-16723, Year of construction: 2022, operating hours: 288 h, lifting height: 4,750 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 2.000 kg Maximum passing height: 214 cm Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Front tyre size: - Iisdetr Hkxepfx Apcja Rear tyre size: - Transport dimensions (LxWxH): 3.5x1.15x2.13 Please contact PFEIFER GROUP for more information

Condition: used, machine/vehicle number: 8FBM20T-16828, Year of construction: 2022, lifting height: 4,750 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 2.000 kg Maximum passing height: 214 cm Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Iiedpotr Hi Eofx Apcja Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.5x1.15x2.13 Please contact PFEIFER GROUP for more information

Condition: used, machine/vehicle number: 8FBM20T-16885, Year of construction: 2022, lifting height: 4,750 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 2.000 kg Maximum passing height: 214 cm Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Isdpfx Apetr H Apocoia Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.5x1.15x2.13 Please contact PFEIFER GROUP for more information

Condition: used, machine/vehicle number: 8FBM20T-16734, Year of construction: 2022, operating hours: 1,421 h, lifting height: 4,750 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 2.000 kg Maximum passing height: 214 cm Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Front tyre size: - Rear tyre size: - Iodstr H I Uspfx Apcoia Transport dimensions (LxWxH): 3.5x1.15x2.13 Please contact PFEIFER GROUP for more information

Condition: used, machine/vehicle number: 8FBM20T-16724, Year of construction: 2022, operating hours: 172 h, lifting height: 4,750 mm, fuel type: diesel, motor manufacturer: -, Lifting capacity: 2.000 kg Maximum passing height: 214 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.5x1.15x2.13 Please contact PFEIFER GROUP for more information Iiedotr Hznopfx Apcoa

Condition: excellent (used), Heavy duty wooden pallets with 3 skids Ijdpfx Ael Uvv Tspcjia accessible from 4 sides length 1680 mm width 1250 mm board thickness 45 mm weight 82,5 kg several available

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Iisdjvzkyljpfx Apcea Item location: 75053 Gondelsheim See pictures

Condition: good (used), Year of construction: 2024, Welding turntable KT 300 Iijdpebvk I Eofx Apcoa Load horizontal 300 KG, tilted 150 KG Power consumption 220V, 50 Hz table diameter 450mm height 500mm Tilt range stepless via crank gear motor 0 - 90°. speed 0,3 - 2,5 rpm Incl. foot remote control Surcharge: Quick release - jaw chuck diameter 300mm, 450.-€