Used Hinge Joint Fance Machine for sale (66,534)

Condition: used, Year of construction: 2013, x-travel 600 mm y-travel 530 mm z-travel 510 mm Control M 730 BM MAPPS IV max. spindle speed 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 transmission ratio 1 spindle diameter in front bearing 80 mm table surface area 900 x 600 mm max. table load 800 kg T-slots 6x 18 x 100 mm distance spindle /table 150 - 660 mm number of toolpositions 30 pos. tool taper SK 40 Pgjdpfx Aisx R Enbsrst max. tool diameter 80 mm max. tool-dia with free toolbox 150 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool ca. 1,3 sec change-time chip to chip ca. 3,45 sec rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 30.000 mm/min Tipp feed 0 - 5.000 : 20 mm/min total power requirement 30 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - Machining Center Vertical MORI SEIKI - NVX 5060 II / 40

Condition: used, Year of construction: 2007, x-travel 635 mm y-travel 510 mm z-travel 460 mm control iTNC 530 Heidenhain power capacity - main spindel 13 / 9 kW turning speed range - main spindle 20 - 10.000 min/-1 Torque 83 / 57 Nm tool taper SK 40 tension force 10 kN table surface area 790 x 560 mm Pjdeyaci Hopfx Airjgt number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min Feed force 5 kN input unit 0,01 mm rapid traverse 30 m/min total power requirement 20 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V - Spindle-Runtime only approx. 7.883h - Power-On approx. 23.023h

Condition: used, Year of construction: 2002, x-travel 750 mm y-travel 600 mm z-travel 520 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper HSK-A63 table surface area 700 x 500 mm Swivel range B-Axis 0 - 180 ° Swivel range C-Axis 0,001 ° max. table load 350 kg center hole 30 H6 mm T-slots 7x 14H7 x 63 mm Pedpfxjuntmdj Airjgt table turning speeds 21,5 rpm number of toolpositions 32 pos. max. tool length 315 mm max. tool diameter 105 mm max. tool-dia with free toolbox 130 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 50 / 50 / 50 m/min feed speeds 20.000 mm/min Feed force X / Y / Z: 8 / 8 / 7 kN total power requirement 50 kVA weight of the machine ca. 8,5 t dimensions of the machine ca. 6,5 x 3,5 x 3,5 m 5 Axis-CNC-Machining Center DECKEL MAHO - DMU 70 eVolution - 5 Axis - NC-Swivel-Rotary-Table - Operating-Hours: Power-On: ca. 62.500h / Spindle: ca. 15.100h

Condition: used, Year of construction: 2003, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 125 Nm tool taper MAS BT 40 swivellable B: 103 ° feed: feed speeds 20 - 10.000 mm/min rapid traverse X-axis 26 m/min rapid traverse Y-axis 26 m/min rapid traverse Z-axis 20 m/min Resolution 0,001 mm input unit 0,001 mm work table: surface area 1.000 x 600 mm rotary table dia. 600 mm number of T-slots 8 / 1 T-slot - width 14 H12 / 14 H7 T-slot - distance 63 mm max. table loading capacity 350 kg rotatable C: 360 ° Tool-Presetter: number of toolpositions 24 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 315 mm max. tool weight 8 kg Pjdpfx Asvn Utcoirogt total wight max. 100 kg total power requirement 26 kVA weight of the machine ca. 6,7 t dimensions of the machine ca. 4,0 x 4,0 x 3,0 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 T - 5-Axis - controled NC-Swivel-Milling-Head ( B-Axis ) - Rotary Table integrated in Working-Table ( C-Axis )

Condition: used, Year of construction: 2007, x-travel 730 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain Pgedpfx Ajwpw E Nsirjt turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x 63 mm table diameter 600 mm rotatable C: 360 ° max. table load 500 kg number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 40 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 5 Axis - NC-Rotary-Table - Swivel-MillingHead

Condition: used, Year of construction: 2008, x-travel 800 mm Pgjdpfxjukwatj Airot y-travel 800 mm z-travel 800 mm Control iTNC 530 Heidenhain Max. rpm 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper HSK-A63 swivellable B: 0 - 190 ° swivle time 1,2 s table diameter 900 x 700 mm max. table load 1.400 kg rotatable C: 360 ° number of toolpositions 40 pos. tool taper HSK-A63 change-time chip to chip ca. 5,0 sec rapid traverse ( X / Y / Z ) 60 m/min rapid traverse B: 30 m/min rapid traverse C: 30 m/min feed speeds max. 60.000 mm/min total power requirement 64 kVA weight of the machine ca. 14,0 t dimensions of the machine ca. 6,5 x 6,5 x 3,5 m 5 Axis CNC-Machiningcenter Universal DECKEL MAHO - DMU 80 P duoBLOCK - 5-Axis - Swivel-Milling-Head - Rotary-Table

Condition: used, Year of construction: 1998, x-travel 1.020 mm y-travel 510 mm z-travel 510 mm control MSC 501 Fanuc table surface area (APC) 1.200 x 480 mm max. table load (APC) 550 kg turning speed range - milling 10.000 U/min power capacity - milling spindle 22 / 18,5 kW tool taper BT 40 number of toolpositions 30 pos. tool taper BT 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse 32 m/min Pgodpfx Aiey Apcyoret feed 1 ~ 16.000 mm/min Tipp feed 0 ~ 1.260 mm/min spindle bearing diameter 85 mm total power requirement 59,5 kVA weight of the machine ca. 6,9 t dimensions of the machine ca. 3,9 x 2,7 x 2,9 m CNC - Machining Center - Vertical MORI SEIKI - SV 500 B/40 - Clamping devices are NOT included in the scope of delivery

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg T-slots 7x 14 x 63 mm number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 Psdpfx Aijy E Tv Asrogt - 3 Axis - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm Pgsdpfxszyu Ums Airet z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 Nm tool taper HSK A-63 table surface area 630 x 500 mm max. table load 300 kg Swivel range -5 / +110 ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 25 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DMG MORI SEIKI - DMU 50 - 5 Axis - swivable rotary table

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. Pedjtyqizopfx Airogt In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: A-260606, input voltage: 400 V, warranty duration: 3 months, cutting width (max.): 77 mm, overall weight: 300 kg, type of input current: three-phase, control voltage: 24 V, input frequency: 50 Hz, input current: 2 A, cutting height (max.): 100 mm, Object A260606 Refurbished Gingerbread/Cake Slicing Machine Fully refurbished gingerbread slicing machine with a cutting thickness of 77 mm. All electrical switching equipment and pneumatic components have been replaced in accordance with the latest state of current technology. By equipping the machine with two-hand operation, it has been made very safe to operate. Machine Information: Overall machine length: 1.6 meters Pedpfx Aiez Erybjrogt Overall machine width: 1.25 meters Overall machine height: 1.3 meters Machine working height: 0.9 meters Distance between knives: 77 mm Machine Capacity: 240 wide slices of bread per hour Electrical Information Power supply: 400 V, N+PE Power consumption: 1.0 kW Plug type: CEE-form, 5-pin, 16 A (round red plug) Compressed air required?: Yes Minimum and Maximum Product Dimensions Product length: 100–500 mm Product width: 80–755 mm Product height: 40–100 mm Machine Description This cookie slicing machine has been completely refurbished. The machine was fully disassembled, thoroughly cleaned by blasting, and coated with a durable two-component finish. It was then completely rebuilt. The machine is equipped with new bearings, a new drive motor, new pneumatic components, and a renewed and improved electrical system based on the latest technology. The machine is mounted on wheels. The speed of the product pusher is adjustable, allowing it to be adapted to the type of product being processed. This machine is in like-new condition! The machine is suitable for slicing breakfast cake (gingerbread-style cake) and/or currant bread. The machine is equipped with two swivel castors with brakes and two fixed castors. Warranty: 3 months (excluding knives)

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: A-240601 en A-260302, input voltage: 400 V, warranty duration: 3 months, cutting width (max.): 12 mm, overall weight: 900 kg, type of input current: three-phase, control voltage: 24 V, input frequency: 50 Hz, input current: 6 A, year of last overhaul: 2026, cutting height (max.): 125 mm, conveyor belt width: 310 mm, Machine information: A-240601 Total machine length: 1.4 meters Total machine width: 0.7 meters Total machine height: 2.0 meters Infeed height: 1.2 - 1.8 meters Machine working height: 1.0 meter Cutting thickness: 12 millimeters Machine capacity: 1250 loaves per hour. Electrical information: Connected load: 400 volts, N+PE. Power consumption: 2.5 kilowatts. Plug type: CEE-form 5-pin 16 Amp (round red plug). Compressed air required?: No Minimum and maximum product dimensions: Product length: from 150 to 350 mm. Product width: 170 mm. Product height: from 40 to 125 mm. Machine description: This cake slicer has been fully overhauled. It was completely disassembled, grit-blasted, and sprayed with a durable 2-component coating. Following this, the machine was entirely rebuilt. It features new bearings, a new drive motor, and a renewed and improved electrical system according to the latest state-of-the-art technology. The machine is mounted on wheels. The product pusher allows you to push the final loaf through the blades. This machine is in excellent condition! The machine is suitable for slicing types of bread without fruits. This machine is mounted on 4 castors and is easy to move. It includes an oil reservoir to apply slicing oil to the band blades. Object A260302 Refurbished semi-automatic (manual) packaging line equipped with a blowing table, Kwik Lok brush machine, and clip-closing machine. Semi-automatic (manual) painted packaging line equipped with a Kwik Lok brush machine, type 1082, a Kwik Lok clip-closing machine, type 871A, and a bag-opening blowing table. Machine direction of operation: left to right Machine information: Total machine length: 3.5 metres Total machine width: 1.5 metres (including blowing table) Total machine height: 1.8 metres Working height: 0.9 metres Length of conveyor section: 1.8 metres Length of roller conveyor: 1.0 metre Conveyor flight spacing: 305 mm Machine capacity: 1800 packages per hour Electrical information Power supply: 400 V, N + PE Connected load: 1.2 kW Plug type: CEE-Form, 5-pin, 16 A (round red plug) Compressed air required: No Minimum and maximum product dimensions Product length: 100–350 mm Product width: 80–210 mm Product height: 40–160 mm Machine description: The frame and both (2) leg assemblies are manufactured from painted profiles, manufactured by Waterlander. The machine is equipped with a Samach brush machine and a Kwik Lok clip-closing machine, suitable for Kwik Lok JNRP clips and Schutte clips. At the end of the packaging line, a 1-metre-long roller conveyor is provided for manually removing the packaged products. The machine is mounted on wheels and is equipped with conveyor flights with a fixed transport speed. The machine is fitted with a completely new control system and has been fully refurbished. The machine is finished with a two-component high-durability topcoat. Pgsdez Eud Ajpfx Airet The machine is suitable for packaging food and non-food products in plastic bags. Included: with the machine, a painted Hoba blowing table, stainless-steel top face, and product guides.

Condition: used, functionality: limited functionality, machine/vehicle number: A-260605, input voltage: 400 V, overall weight: 500 kg, type of input current: three-phase, total length: 1,750 mm, total width: 1,300 mm, total height: 1,600 mm, control voltage: 24 V, input frequency: 50 Hz, input current: 4 A, Equipment: compressor, Object A260605 Sinmag CT808 Cake Cutting Machine Semi-automatic cake cutting machine with 10 different cutting programs, designed exclusively for round cakes with a maximum diameter of 300–335 mm and a maximum height of 100 mm. Machine Specifications Total machine depth: 1.75 m Total machine width: 1.30 m Total machine height: 1.60 m Working height: 1.00 m Maximum cake diameter: 300–335 mm Maximum cake height: 100 mm Machine Capacity: Capacity is entirely dependent on the number of portions/slices to be cut. Electrical Information Power supply: 230 V, N + PE Power consumption: 1.0–1.15 kW Plug type: 2 × standard household plugs Compressed air required: Yes Pgodpfx Aisz Eui Serjt Minimum and Maximum Product Dimensions Product diameter: 100 to 335 mm Product height: 20 to 100 mm Operating Description – Sinmag CT808 Cake Cutter The Sinmag CT808 is a semi-automatic cake cutting machine designed for accurately dividing round cakes and pastry products into equal portions. The machine is controlled via a Siemens PLC control system with a touchscreen interface, allowing various cutting programs to be selected and adjusted. All settings are controlled through a Siemens touchscreen display, which also supports multiple language options. The machine is clad with polished chrome-finished stainless steel panels, providing a high-gloss appearance, and is mounted on four swivel castors with brakes for easy movement and secure positioning.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, input voltage: 400 V, overall weight: 400 kg, type of input current: three-phase, total length: 3,000 mm, total width: 1,600 mm, total height: 1,850 mm, control voltage: 24 V, input frequency: 50 Hz, input current: 3 A, Object A240401. Rebuilt stainless steel semi-automatic (hand) packing conveyor with Kwiklok clip closing set. Stainless steel hand packaging conveyor, including 2 bag blowing tables, and Kwiklok bag tensioner type 1082J8 and Kwiklok clip closing machines, type 872 XLS. Machine direction: from Right to Left. Machine information: Total machine length: 3.0 meters Total machine width: 1.6 meters (including bag blowing table) Total machine height: 1.85 meters Machine working height: 0.97 meters Length of input conveyor used: 2.65 meters Length of discharge belt used: 0.3 meters Flight distance: 305 millimeters Machine capacity: 1800 packages per hour. Electrical data: Power connection: 400 volts, neutral and earth. Power consumption: 3.2 kilowatts. Plug connection: Cee-Form 5 pin 16 Amp (round red plug). Compressed air: No. Minimum and maximum product dimensions: Products from 100 to 500 mm long. Products from 80 to 210 mm wide. Products from 40 to 160 mm high. Machine version: Frame and legs (2) made of stainless steel construction, ASI 304. Deck, guides, and flights are stainless steel ASI 304. Bag tensioner machine, Manufacturer Kwiklok, type 1082J8. Clip closing machine, Manufacturer Kwiklok, type 872 XLS (clips Kwiklok type JNRP). At the end of the transporter, there is a roller deck, length 0.3 millimeters. Machine equipped with a safety guard at the beginning of the roller deck. Machine stands on wheels (mobile). Fixed carrier speed. New electrical installation on the packing track. Machine is completely rebuilt. Machine description: Packing track, machine suitable for packaging food and non-food products in foil bags. Machine includes: 2 sets of bag blowing tables. Warranty: 3 months. Psdpfez Euk Aox Airegt

Condition: excellent (used), Year of construction: 2014, Arburg 370S 700-290 U-Version! Pgedpfxsz E Hido Airjt Year of manufacture: 2014 Screw diameter: 40 mm Core pull: 1 Hot runner control valves: 6 Blow-out system: 1 Interface for coloring device

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2027, The Railcrawler is manufactured to order. Delivery will commence from the end of the first quarter of 2027. An attractive introductory price applies to the first machines, which we will be happy to provide on request. Hoeflon International B.V. of Barneveld (Netherlands) develops and manufactures compact electric crawler-mounted platforms and compact cranes, and serves customers throughout Europe via a network of dealers. Pgodpez Erb Sjfx Airst We would be happy to send you our brochure containing all the technical specifications. Please use the contact form. We are also happy to assist you with a demonstration, a bespoke quotation or any questions regarding your application. All prices are net, plus statutory VAT. This offer is aimed at commercial customers.

Condition: excellent (used), Year of construction: 2020, 2020 Tederic D450/3200 Injection Moulding Machine Pgedpfx Aijz E Rm Herot Closing force: 4500 kN. Diameter of center ring injection side: 200 mm. Diameter of center ring ejection side: 100 mm. Distance between the bars: 780 x 780 mm. Min mould height: 300 mm. Max mould height: 780 mm. Clearance between tables: 1580 mm. Capacity injection: 1741 cm3. Hydro Ejector: Yes. Quantity core pulling: 2. Turn on hours: 42864,1. Work hours: 16385,9. Motor: 56 kW. Heating power: 39 kW. Worm diameter: 75 mm. Ejector stroke: 200 mm. Machine S/No: T3045-0141. Robot: 2018 SW7315DS. Note: The auction includes the injection molding machine and the robot, but does not include other equipment visible in the photos, such as plastic feeders and temperature controllers for heated channels visible in the attached photos, as well as conveyor belts and safety fences.

Condition: used, Year of construction: 2011, 2011ARBURG 370 S 500-100 CNC Injection Moulding Machine Pgjdoz E Ry Tspfx Airot S/No: 218960. Clamping force: 50 t. Clearance between tie bars: 370x370 mm. Max. platen dimensions: 510x510 mm. Screw diameter: 30 mm. Shot weight: 65 g. Injection pressure: 1390 bar. Shot volume: 71 cc. Operating voltage: 400 V, 3~, 50 Hz. Control voltage: 230 V~, 50 Hz. DC control voltage: 24 V. Nominal motor current / heating: 58 / 13 A. Total rated current: 71 A. Total connected load: 42 kW

Condition: excellent (used), JBT Proseal GT2 direct from UK snack food factory. Available with optional 6 metre Proseal OC indexing conveyor (at extra cost). In beautiful condition. Also available with optional date coder and inline check weigher / metal detector. Pgsdpfx Aiez E Nyfsrjt We have three identical lines.

Condition: ready for operation (used), functionality: fully functional, spindle bore: 20 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 65 rpm, overall weight: 170 kg, total length: 1,200 mm, total width: 450 mm, Single-phase 230-volt, 2-speed motor is running smoothly. Geared headstock, gears running in oil. 8 spindle speeds adjustable from 65 to 2800 RPM. Power feed in sideways directions. Thread cutting possible, gear changes included. Psdpez E Rymefx Airsgt MT2 tailstock spindle. Made in Austria. Emco cabinet. Quick-change toolpost. Distance between centers: 620mm Center height: 105mm Spindle bore: 20mm Emco FB2 milling column. Geared head, gears running in oil. 6 spindle speeds adjustable from 120 to 2000 RPM. Head adjustable in height and angle. MT2 spindle. Overall dimensions: 120x45x115cm Includes all accessories as shown in front of the machine. Contact us for shipping options! €2,650.00

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, total height: 2,200 mm, total length: 4,410 mm, total width: 2,600 mm, GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Pgjdoz E Ra Hjpfx Airst Max. Clamping Diameter: approx. 315 mm Power: 25 kW Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4410 x 2600 x 2200 mm Year of construction: 2,015 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Pgsdpfx Aiey Nl U Sjret

Condition: good (used), Year of construction: 2010, 5-axis CNC machining center - universal - Manufacturer: CHIRON Machine Model: Mill 2000 Control: Siemens 840D Year of manufacture: 2010 TECHNICAL DATA Travel ranges - X-axis: (mm) 2,000 - Y-axis: (mm) 500 - Z-axis: (mm) 550 Rapid traverse rate: X/Y/Z (mm/min) 60,000 Spindle - Internal coolant supply (ICS): (bar) - Spindle speed max.: (rpm) 12,000 Tool magazine - Tool holder: SK40 - Tool places: 40 Machine table - Size of fixed table L x W: (mm) 2,000 x 550 Number of rotary tables: 2 - Manufacturer: Peiseler - Model: ZAS 160 Number of steady rests: 2 - Manufacturer: Peiseler - Model: GP MK 3 - Actuation: hydraulic EQUIPMENT FEATURES + Siemens 840D control + Partition for alternating machining + Rotary tables, 2, 1 on the right, 1 on the left. Podpfx Aiez E Nvgjregt Manufacturer: Peiseler, Model ZAS 160 + Steady rests, 2, 1 on the right, 1 on the left. Manufacturer: Peiseler, Model GP MK3 + ICS pump 40.6 bar + Chip conveyor, screw conveyor + Paper band filter + Air blow gun, 2, 1 on the right, 1 on the left + Chip flushing gun, 2, 1 on the right, 1 on the left + Electronic mini handwheel with emergency stop + Air-conditioned control cabinet + Fire extinguishing system + Hydraulic system + Signal light, 3-color Subject to changes and errors in the technical data and information.

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control Pjdjzqnxtjpfx Airogt - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: good (used), Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinding machine, center grinding machine -Max. shaft diameter: 320 mm -Max. grinding length: 345 mm Podpfx Asduiw Aeirjgt -Chuck size: Ø 133 mm -Dimensions: 1925/1135/H1755 mm -Weight: 1592 kg -functionally tested