Used Hobart Cn-C-A-Cdc for sale (86,991)

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C/110-A-1 Permanent Magnet Motor SN MAC090-93888, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Dsdolntwqepfx Ad Nekl

Condition: new, Rexroth MAC090C-1-GD-4-C/110-A-2/WI521LV/S013 Permanent Magnet Motor, SN MAC090-48116, after overhaul by the manufacturer, unused in opened original packaging, 100% functional Djdji D Nf Hspfx Ad Nekl

Condition: ready for operation (used), Indramat MAC 090C-0-KD-4-C / 130-A-0 / WI522LV / S003 permanent three-phase servo motor + Stegmann DG 1604 2500 PULS / REV, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Djdpfx Adei D Ih Rj Njkl

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-A-1 permanent magnet three-phase servo motor, serial no. according to photo, used, strong traces of use, 100% functional, scope of delivery according to photos,ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dodpsi D Iivefx Ad Nokl

Condition: ready for operation (used), Indramat MAC093A-0-PS-2-C/110-A-1/S005 permanent magnet motor , serial no. according to photo , hole spacing of mounting holes: 116 x 116 mm, Ø drive shaft: 24 mm ,used, normal signs of wear, 100% functional Dkjdpfx Aoi D Imvod Nel

Condition: ready for operation (used), Rexroth MAC112B-0-GD-3-C / 130-A-0 3~Phase Permanent Magnet Motor SN: MAC112-56238 ,used, good condition, 100% working, scope of supply acc. photos Dsdpfx Asi D Nf Usd Nekl

Condition: ready for operation (used), Rexroth MAC112A-0-VD-2-C/130-A-1 3-phase permanent magnet motor MNR: R911224444 SN:MAC112-A0256 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Dedpfx Adstz Idwe Nokl

Condition: ready for operation (used), Indramat MAC071B-0-TS-4-C/095-A-1/WI522LV Permanent Magnet Motor , serial no. according to photo , hole spacing of mounting holes: 92 x 92 mm, Ø drive shaft: 19 mm ,used, normal signs of wear, 100% functional, scope of delivery according to photos Djdji D Ik Tspfx Ad Nekl

Condition: ready for operation (used), Indramat MAC071C-0-GS-4-C / 095-A-0 / WI520LV Permanent Magnet Motor SN: MAC071- 72403, Heidnenhain ROD 1424.003-129 ID 250 040 03 encoder, used, heavy signs of wear, 100% functional, scope of delivery as per photos Dsdpsi D Il Rofx Ad Nskl

Condition: ready for operation (used), Indramat MAC114C-0-MD-2-C/130-A-1 permanent magnet motor, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Dsdei D Irdopfx Ad Nekl

Condition: ready for operation (used), Indramat MAC63C-0-MS-1-C / 95-A-0 / J1000 permanent magnet three-phase servo motor SN: 17285, housing broken off from connector, function not affected ,used, normal signs of use, 100% functional, scope of delivery according to photos Dsdpfx Aji D Irted Njkl

Condition: ready for operation (used), Indramat MAC 090C-0-KD-4-C / 130-A-0 / WI522LV / S003 Permanent three-phase servo motor SN:54968 without tacho and encoder, used, normal signs of wear, 100% functional, scope of delivery as per photos Dksdpfxsrmga Ue Ad Njl

Condition: ready for operation (used), Indramat MAC071A-0-ES-2-C/095-A-0// Permanent three-phase servo motor SN:12254, used, strong signs of use, 100% functional, scope of delivery as per photos Dkedpfx Adjvy N Sqs Nel

Condition: ready for operation (used), Indramat MAC063D-0-JS-4-C / 095-A-0/WI518LV Permanent Magnet Motor SN: MAC063-25511, used, in good condition, fully functional, scope of delivery as per photos. Dedpfx Adsx Etyuj Nokl

Condition: ready for operation (used), Indramat MAC090B-0-PD-4-C/110-A-0/WI520LV / 235450 servomotor, serial number: MAC0290-85049 + Heidenhain ROD 1424.003-1250, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Dkedpfx Asx Etyzsd Njl

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C/110-A-0 MNR: R911222786 Motor SN: MAC090-33360, used, in good condition, 100% fully functional, delivery scope as shown in the photos. Dksdpex Dubzsfx Ad Njl

Condition: new, Stritorque HDD 09J - Pa-Ent-At-A-C-AAM SN:006499, unused, 100% functional, scope of delivery as per photo Dkedpfxjx Dwdfe Ad Njl

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor Dsdpfx Ajin Ub Tsd Nokl - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: used, Bacci MOM 90-C A Double mortising machine, horizontal and vertical, automatic, with loader. Djdpfx Adopph Hwo Nskl 5 vertical spindles per side 2 horizontal spindles 6 oscillation settings

Condition: excellent (used), Year of construction: 2003, 2003 Mitsubishi CNC Shaving Gear cutter grinder Model ZA30CNC, Year 2003, With Fanuc Series 16i-M HMI, Includes FN-0013 Dust Collector, Power 200/220 Volts / 3 Phase , Weight 15000 Lbs. Dodsywftkspfx Ad Nskl

Condition: used, Year of construction: 2013, 2013 SMC Group Routech Accord 30FX CNC machining center, high performance multi-function work table, 400V, 3 phase, X-axis 20' 10", Y-axis 5' 4.7", dual machining heads, rotation speed 6-18,000 RPM, onboard Rapid 12-tool changer, Rapid 16 rear tool changer, work table, pod, and rail, gantry type, has SMC Group CNC control with remote pendant control, 480V, 3 phase, Becker, model 271407, rotary vane vacuum pump, and (1) Texa, model SAW50RBSBCC000, chilling unit with transformer, winning bidder responsible for proper removal. Djdpfxsxdc T Sj Ad Nekl

Condition: used, Mecof CNC Bed Type Milling Machine x 9000mm Key Specifications Manufacturer Mecof Condition Used Stock Number 00265 Dodpfx Adoy N Amxe Njkl Table Size 9000 mm × 2200 mm X-Axis Travel 7200 mm Y-Axis Travel 1008 mm Z-Axis Travel 2040 mm Universal Head Heidenhain TNC 426 CNC Control Hand Wheel

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2016) Stock Number 2851 Protrak SLX CNC Swing over bed 560mm Swing in gap 935mm Dedex Hp I Ropfx Ad Nskl Swing over cross slides 350mm Distance between centres 3000mm Spindle bore 104mm Additional Features Protrack SLX Control Drilling Attachment 4 Way Toolpost 3 Jaw Chuck 3 Point Steady

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Dodpfx Adey Ni Ivs Nskl

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Dodjyvqdfopfx Ad Nekl