Used Hurco Cnc Lathe With Driven Tools for sale (39,941)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, turning length: 650 mm, turning diameter: 355 mm, spindle speed (max.): 3,500 rpm, spindle nose: A2-8, Equipment: documentation/manual, Machine with tailstock. CNC FANUC 21T Year 1998 Capacity Turning Ø: 355 mm Turning length: 650 mm Spindle: Spindle nose: A2-8 ASA Spindle speed: 3500 rpm Motor power: 18.5 Kw Turret: Hodezp Hh Dspfx Adzor Tool Stations: 10 Tailstock: Cone: 5 CM

Condition: excellent (used), Year of construction: 2019, MAZAK QUICK TURN 350MB 1250U Max. swing diameter: 830 mm Max. turning diameter: 420 mm Max. turning length: 1,250 mm Max. milling speed: 5,000 rpm Max. spindle speed: 3,300 rpm Hsdpfx Adjy Igz Djzer Machine is equipped with: - CNC control Mazatrol SmoothG - SMW three-jaw chuck KNCS 400, diameter 400 mm - Tool Eye - C-axis - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: used, Year of construction: 2008, turning diameter 100 mm turning length 280 mm control Index C200-4D bar passage 60 mm spindle tunring speed 6.000 U/min auto power on hours ca. 76.525 In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine comes from its original owner, operates in an oil environment, and has undergone annual maintenance. Only brass was processed on the machine. No tool holders are included in the scope of delivery! Accessories: - Short bar loader - Chip conveyor Hjdpfx Aozndtujdzor - Parts removal device Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale!

Condition: excellent (used), Year of construction: 1999, • FANUC 210i - T control (cycles) • Max. distance between centers: 1,250 mm • Max. turning diameter: 400 / 585 mm in offset • Spindle speed: 12 . . . 2,500 rpm • Spindle bore: 54 mm • X-axis: 210 mm • Z-axis: 1,181 mm • Cutting gap adjustment: 0.05 – 0.8 mm • Motor power: 7.5 kW • Weight: approx. 2,700 kg Hjdpsw S E R Refx Adzor

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Hodpfxev R E Rdo Adzer Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown Hsdpfx Asw A Af Iedzer - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre Hjdpfx Aow Dvv Asdzer - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 95950 € 1813.46 € 630 mm 2000 mm 85 mm 400 mm 350 mm D1-8 1/16 MK 3 37 - 2250 1/min 5000 mm/min 8000 mm/min 280 mm 75 mm 5 MK 190 mm 9 / 13.5kW (S1 / S6 40%) kW X: 0.02 Z: 0.04 mm X: 0.01 Z: 0.035 mm ISO3655 3840 mm 1905 mm 2235 mm 4200 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function • Workpiece coordinate system • Coordinate system rotation • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software Hsdpjzcqx Usfx Adzor Large spindle bore, with precision bearings for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis. 2-axis AC servo motors 50-300 mm roller-type tailstock. Manual tailstock quill, diameter 75 mm (MK5), travel 190 mm. Programming and operating instructions. Electronic handwheel for X and Z axes Manual 4-station tool holder (25 x 25 mm) Automatic lubrication system Fully enclosed splash guard with sliding door and window Chip container with coolant tank Inspection report LED work light Coolant system Preparation for oil cooling system OPTIONS (PRICES ON REQUEST): Fagor control system instead of Siemens Manual or hydraulic chuck 8-station turret (VDI, slot type o BMT version), optionally with driven tools Electrically rotatable 4-station tool holder Chip conveyor High-pressure coolant pump Further options on request ALTERNATIVE: FCL-2540 variant with 1000 mm centre distance FCL-2560 variant with 1500 mm centre distance

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 87350 € 1650.92 € 540 mm 1500 mm 85 mm 310 mm 350 mm D1-8 1/20 MK 3 27 - 2250 1/min 5000 mm/min 8000 mm/min 280 mm 75 mm 5 MK 190 mm 9 / 13,5 (S1 / S6 40%) kW 0.02 mm 0.016 mm ISO3655 3340 mm 1905 mm 2235 mm 3400 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function • Workpiece coordinate system • Coordinate system rotation • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software Large spindle bore, with precision bearings for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (Class C5) on the Z-axis and ball screw Ø 25 mm (Class C3) on the X-axis. 2-axis AC servo motors 50-300 mm roller-type tailstock. Manual tailstock quill, diameter 75 mm (MK5), travel 190 mm. Programming and operating instructions. Electronic handwheel for X and Z axes Manual 4-station tool holder (25 x 25 mm) Automatic lubrication system Fully enclosed splash guard with sliding door and window Chip container with coolant tank Inspection report LED work light Coolant system Hodpfszbvabjx Adzsr Preparation for oil cooling system OPTIONS (PRICES ON REQUEST): Fagor control system instead of Siemens Manual or hydraulic chuck 8-station turret (VDI, slot type o BMT version), optionally with driven tools Electrically rotatable 4-station tool holder Chip conveyor High-pressure coolant pump Further options on request ALTERNATIVE: FCL-2140 variant with 1000 mm centre distance FCL-2180 variant with 2000 mm centre distance

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 77850 € 1471.37 € 460 mm 1000 mm 56 mm 230 mm 350 mm D1-6 1/20 MK 3 33 - 3100 1/min 5000 mm/min 8000 mm/min 280 mm 75 mm 5 MK 190 mm 9 / 13,5 (S1 / S6-40%) kW 0.02 mm 0.01 mm ISO3655 2840 mm 1905 mm 2235 mm Hedpszbu U Rjfx Adzer 2900 kg THREE OPERATING MODES: CNC / TEACH-IN / MANUAL Siemens 828D CNC control • 12-inch colour screen • Linear interpolation • Circular interpolation • Helical interpolation • Skip function • Workpiece coordinate system • Coordinate system rotation • Rigid tapping • Mirror image, scaling and rotation • Turning cycle • ShopTurn software With precision bearings ensuring spindle runout of less than 0.005 mm, for high accuracy and consistent cutting stability. Precision ball screw Ø 40 mm (class C5) on the Z-axis and ball screw Ø 25 mm (class C3) on the X-axis. 2-axis AC servo motors 20-160 mm roller-type tailstock. Manual tailstock quill, diameter 75 mm (MK5), travel 190 mm. Programming and operating instructions. Electronic handwheel for X and Z axes Manual 4-station tool holder (25 x 25 mm) Automatic lubrication system Fully enclosed splash guard. Chip container with coolant tank Inspection report LED work light Coolant system Preparation for oil cooling system OPTIONS (PRICES ON REQUEST): Fagor control system instead of Siemens Manual or hydraulic chuck 8-station turret(VDI, slot type o BMT version) Chip conveyor High-pressure coolant pump ALTERNATIVE: FCL-1860 variant with 1500 mm centre distance

Condition: used, Spare parts donor We are dismantling the CNC turning machine GILDEMEISTER, type GDM 42/2A CNC control system Eltropilot EPL 2 Hodjdzqm Ropfx Adzjr Machine no. 4.5733, year of manufacture 1989 Machine not operational - electrical problems Turning diameter, normal: 185 mm Swinging diameter, max.: 400 mm Cross slide travel = planar travel: 190 mm Longitudinal slide travel = longitudinal travel: 450 mm Spindle bore in the turning spindle: 52.7 mm Spindle passage in the draw tube: Ø 42 mm Feed rate X and Z, max.: 3000 mm/min Spindle speed: 40-6300 rpm, continuously variable Motor power, spindle drive: 22 kW Mains connection: 400 volts, 50 Hz, 45 kVA - Hydraulic 3-jaw chuck FORKARDT, Ø 200 mm - Tool turret, 12-station, VDI 40, every second station powered - Powered tool station in 6 stations - Electrical cabinet located beside the machine Footprint of the complete machine, L x W x H: 5000 x 2500 x 2100 mm Weight of the complete system: approx. 5.7 tons good condition Transport dimensions: Footprint of the base machine, L x W x H: 3000 x 2300 x 1900 mm Weight of the base machine: approx. 4.8 tons Footprint of the machine's electrical cabinet, L x W x H: 2500 x 550 x 2000 mm Weight of the machine's electrical cabinet: approx. 450 kg without chip conveyor Main motor missing Individual parts available upon request In the electrical cabinet: Siemens Siemens 6SC6101-3A-Z + the circuit boards

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE DISTANCE BETWEEN CENTRES: 210 - 1290 mm MAX TURNING LENGTH: 1090 mm MAX TURNING DIAMETER: 245 mm BAR CAPACITY: 65 mm SPINDLE: 11-15 kW; 221,5 Nm Hedpfx Adozqwf Aszer COUNTER SPINDLE: 6000 rpm; 7,5 - 11 kW HEAD: HSK A63 ; 3,7 - 5,5 kW X1-AXIS TRAVEL: 455 mm X2-AXIS TRAVEL: 222,5 mm Y1-AXIS TRAVEL: ± 70 mm Y2-AXIS TRAVEL: +20 -50 mm Z1-AXIS TRAVEL: 1090 mm Z2-AXIS TRAVEL: 1005 mm B-AXIS TRAVEL: 1080 mm RAPID FEEDS X-Y-Z: 16 - 6-16 - 40 m/min DRIVEN TURRET HEAD: 12 + 12 POS; 6000 rpm; 3,7 - 7,5 kW HIGH PRESSURE COOLANT: 25 Bar CONTROL UNIT: FANUC 31i-A BAR FEEDER: LNS Mod. Hydrobar Sprint S3 WEIGHT: 16000 Kg OVERALL DIMENSIONS: 5551 x 2925 x 2755 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PIECE CONVEYOR

Condition: good (used), Year of construction: 2013, functionality: fully functional, CNC vertical lathe / twin-spindle vertical turning machine Year of commissioning: 2013 Hodpfx Adezp Nr Sszsr Manufacturer: FAMAR S.r.l., Italy Voltage: 400 V / 50 Hz / 3P + N + PE Power supply: 90 kW / 160 A max. Auxiliary circuits: 230 V AC PLC and general devices: 24 V DC CE marked: Yes Chip conveyor: Yes Workpiece conveyor system: Yes Concept: tandem machine with two independent machining stations Condition: used, regularly serviced, currently connected

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 600 mm, turning diameter: 570 mm, spindle bore: 79 mm, Error message: Actuator not operational Hodpfxox Sw Uvo Adzjr lots of accessories

Year of construction: 2018, condition: ready for operation (used), A Hyundai Wia CNC turning center is offered. Max. turning diameter: 560mm, swing diameter over bed: 780mm, swing diameter over slide: 535mm, max. turning length: 1180mm, chuck diameter: 381mm, main spindle bore: 130mm, max. bar capacity: 117mm, max. spindle speed: 2000rpm, spindle power: 37kW/30kW, max. spindle torque: approx. 3073Nm/2490Nm, turret: 12, tool interface: BMT-75, live tools: max. 4000rpm, 7.5kW/5.5kW, X/Z travel: 320mm/1200mm, rapid traverse X: 20m/min, rapid traverse Z: 25m/min, coolant tank capacity: 300l, control: FANUC Series 32i-B, control ON: approx. 10574h, operating time: approx. 5606h, cutting time: approx. 4876h, total parts count: 30968, weight: approx. 11t. Equipment: C-axis, live tools, automatic tool measurement in the working area, programmable tailstock with MT5 quill, high-pressure through-tool coolant (20bar), hydraulic 15-inch power chuck, Manual Guide i, electronic handwheel, tool load monitoring (HWTM), central lubrication and hinge belt chip conveyor. Documentation available. Inspection by appointment possible. Hedpfeznmx Tjx Adzor

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK QUICK TURN NEXUS 250-II M 500U Max. machining diameter: 380 mm Max. machining length: 504 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 74 mm Machine is equipped with: - CNC control: Mazatrol Matrix Hjdpjznnl Iefx Adzor - KITAGAWA 3-jaw chuck, B-210, diameter 254 mm - Tool Eye - C-axis - NC tailstock - reinforced coolant pump - chip conveyor, discharge to the side - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: used, Year of construction: 2000, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2000 Control : Siemens 840D - Powerline Turning diam. : 150 mm Mainspindle: Speed:5.000 rpm Power (max.):25 kW Torque (max.):263 Nm Barcapacity:65 mm Subspindle: Speed:5.000 rpm Power (max.):25 kW Torque (max.):263 Nm Hedpfxozpczme Adzer Toolcarrier I (X/Z): Technology:Turret with 12 stations Taper:VDI 30 Tooldrive:4.500 rpm Movement in X/Z:170/445 mm Rapid travers in X/Z:24/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI 30 Tooldrive:4.500 rpm Movement in X/Z:170/445 mm Rapid travers in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Coolant pumps Rawmaterialfeed:Interface Barloader : Attention:Displayed Clamping devices and tools are NOT included in our offer!

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2/3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Z stroke : 280 [mm] - X stroke : 195 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 0.75/1.5 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 1 LOWER TURRET - Number of positions : 20 - Number of motorized positions : 10 - X/Z stroke : 107.5/133 [mm] - Live tools speed : 6500 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - X/Y stroke : 60.5/208 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 10 [kVA] - Machine floor space : 2780x1260 [mm] - Machine height : 1785 [mm] - Machine weight : 2900 [kg] EQUIPMENT - CNC : Mitsubishi MELDAS M6D - Rotating guide bush - Parts catcher - Parts conveying strip - Coolant tank : COOL BLASTER CB510 * with high-pressure pump - Thread whirling attachment - Bar loader : LNS EXPRESS - Oil mist extractor : Filtermist - Fire extinguisher * Hjdjznnw Dspfx Adzer NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2/3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Z stroke : 280 [mm] - X stroke : 195 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 0.75/1.5 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 1 LOWER TURRET - Number of positions : 20 - Number of motorized positions : 10 - X/Z stroke : 107.5/133 [mm] - Live tools speed : 6500 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - X/Y stroke : 60.5/208 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 380 [V] Hsdpeznnwwofx Adzsr - Total installed power : 10 [kVA] - Machine floor space : 2780x1260 [mm] - Machine height : 1785 [mm] - Machine weight : 2900 [kg] EQUIPMENT - CNC : Mitsubishi MELDAS M6D - Rotating guide bush - Parts catcher - Parts conveying strip - Coolant tank : COOL BLASTER CB510 * with high-pressure pump - Thread whirling attachment - Bar loader : LNS EXPRESS - Oil mist extractor - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2/3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Z stroke : 280 [mm] - X stroke : 195 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 0.75/1.5 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 1 LOWER TURRET - Number of positions : 20 - Number of motorized positions : 10 - X/Z stroke : 107.5/133 [mm] - Live tools speed : 6500 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - X/Y stroke : 60.5/208 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY Hsdpfx Adsznnwqjzsr - Supply voltage : 380 [V] - Total installed power : 10 [kVA] - Machine floor space : 2780x1260 [mm] - Machine height : 1785 [mm] - Machine weight : 2900 [kg] EQUIPMENT - CNC : Mitsubishi MELDAS M6D - Rotating guide bush - Parts catcher - Parts conveying strip - Coolant tank : COOL BLASTER CB510 * with high-pressure pump - Thread whirling attachment - Bar loader : LNS EXPRESS - Oil mist extractor - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2/3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Z stroke : 280 [mm] - X stroke : 195 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 0.75/1.5 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 1 LOWER TURRET - Number of positions : 20 - Number of motorized positions : 10 - X/Z stroke : 107.5/133 [mm] - Live tools speed : 6500 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - X/Y stroke : 60.5/208 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 10 [kVA] - Machine floor space : 2780x1260 [mm] - Machine height : 1785 [mm] - Machine weight : 2900 [kg] EQUIPMENT - CNC : Mitsubishi MELDAS M6D - Rotating guide bush - Parts catcher - Parts conveying strip - Coolant tank : COOL BLASTER CB510 * with high-pressure pump - Thread whirling attachment - Bar loader : LNS EXPRESS - Oil mist extractor - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer Hodjznnwkepfx Adzer

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2/3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Z stroke : 280 [mm] - X stroke : 195 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 0.75/1.5 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 1 LOWER TURRET - Number of positions : 20 - Number of motorized positions : 10 - X/Z stroke : 107.5/133 [mm] - Live tools speed : 6500 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - X/Y stroke : 60.5/208 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 10 [kVA] - Machine floor space : 2780x1260 [mm] - Machine height : 1785 [mm] - Machine weight : 2900 [kg] EQUIPMENT - CNC : Mitsubishi MELDAS M6D - Rotating guide bush Hjdpfjznnwdsx Adzsr - Parts catcher - Parts conveying strip - Coolant tank : COOL BLASTER CB510 * with high-pressure pump - Thread whirling attachment - Bar loader : LNS EXPRESS - Oil mist extractor - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2/3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Z stroke : 280 [mm] - X stroke : 195 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 0.75/1.5 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 1 LOWER TURRET Hodpfx Ajznnv Tsdzsr - Number of positions : 20 - Number of motorized positions : 10 - X/Z stroke : 107.5/133 [mm] - Live tools speed : 6500 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - X/Y stroke : 60.5/208 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 10 [kVA] - Machine floor space : 2780x1260 [mm] - Machine height : 1785 [mm] - Machine weight : 2900 [kg] EQUIPMENT - CNC : Mitsubishi MELDAS M6D - Rotating guide bush - Parts catcher - Parts conveying strip - Coolant tank : COOL BLASTER CB510 * with high-pressure pump - Thread whirling attachment - Bar loader : LNS EXPRESS - Oil mist extractor - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2/3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Z stroke : 280 [mm] - X stroke : 195 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 0.75/1.5 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 1 LOWER TURRET - Number of positions : 20 - Number of motorized positions : 10 - X/Z stroke : 107.5/133 [mm] - Live tools speed : 6500 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - X/Y stroke : 60.5/208 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 10 [kVA] - Machine floor space : 2780x1260 [mm] - Machine height : 1785 [mm] - Machine weight : 2900 [kg] EQUIPMENT - CNC : Mitsubishi MELDAS M6D - Rotating guide bush - Parts catcher - Parts conveying strip - Coolant tank : COOL BLASTER CB510 * with high-pressure pump - Thread whirling attachment - Bar loader : LNS EXPRESS - Oil mist extractor - Fire extinguisher * Hodpsznnv Hofx Adzjr NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 200 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2/3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Z stroke : 280 [mm] - X stroke : 195 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 0.75/1.5 [kW] - C axis indexing precision : 0.001 [°] - Number of turrets : 1 LOWER TURRET - Number of positions : 20 - Number of motorized positions : 10 - X/Z stroke : 107.5/133 [mm] - Live tools speed : 6500 [rpm] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - X/Y stroke : 60.5/208 [mm] SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 10 [kVA] - Machine floor space : 2780x1260 [mm] - Machine height : 1785 [mm] - Machine weight : 2900 [kg] Hjdpfxoznnvys Adzjr EQUIPMENT - CNC : Mitsubishi MELDAS M6D - Rotating guide bush - Parts catcher - Parts conveying strip - Coolant tank : COOL BLASTER CB510 * with high-pressure pump - Thread whirling attachment - Bar loader : LNS EXPRESS - Oil mist extractor - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer