Used Hydraulic Injection Moulding Machine for sale (82,730)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 52,000 h, functionality: fully functional, clamping force: 13,000 kN, screw diameter: 95 mm, Clamping force 13000 kN Mould opening force, max. 910 kN Travel force movable platen opening 217 kN Travel force movable platen closing 153 kN Size of mould platens (h x v) 2210 x 1910 mm Distance between tie bars (h x v) 1570 x 1270 mm Mould opening stroke 2350 mm Mould height min/max 700/1400 mm Max. daylight 3050 mm Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 2173 bar Stroke volume 3721 ccm Shot weight (PS) 2642 gr. Injection rate 659 ccm/s Screw speed 150 1/min Plasticising rate max. 105 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 59 kW Adjustable barrel heating zones 7 Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 13,00 x 4,00 x 3,00 m Total machine weight 64000 kg Max. mould weight 29000 kg Accessories: - Anti vibration pads - Sepro Robot 4050 S3 Trans Kdjdpfxjz Hngyj Ag Aju Additional Options: - 3 x core pulls on movable plate - 3 x core pulls on fix plate - 2 x air valve - 6 x hydr. shot off nozzles - 16 x hotrunner controller - Robot interface according to Euromap 67

Condition: like new (used), functionality: fully functional, machine/vehicle number: B-12, 1 CINCINNATI MILACRON Plastic Injection Molding Machine, Machine No. B-12, 500-ton clamping capacity, hydraulic clamping unit, 3.93 in (100 mm) screw diameter, 12.13 in² barrel area, general-purpose screw, 6.70 intensification ratio, 2,640 psi maximum hydraulic pressure, 17,582 psi maximum plastic pressure, 14.17 in maximum shot size, 2,693 g injection capacity, 43.30 in vertical x 43.00 in horizontal tie-bar spacing, 16.00 in minimum mold height, and 55.10 in maximum clamp opening. ESPAÑOL: 1 Máquina inyectora de plástico MARCA Cincinnati Milacron, No. de máquina B-12, capacidad de cierre de 500 Ton, unidad de cierre hidráulica, diámetro de tornillo de 3.93 in (100 mm), área de barril de 12.13 in², tornillo tipo general, coeficiente de intensificación de 6.70, presión hidráulica máxima de 2,640 psi, presión plástica máxima de 17,582 psi, tamaño máximo de disparo de 14.17 in, capacidad de inyección de 2,693 g, distancia entre barras de 43.30 in vertical x 43.00 in horizontal, altura mínima de molde de 16.00 in y apertura máxima de clamp de 55.10 in. Kedpfoz Svu Dsx Ag Ajdu

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding facility, with only 11,300 operating hours, in near-new condition. The machine was used for the production of 64-cavity pipette molds at NYPRO (Jabil) in Knittlingen and is in near-new condition. It is the last available unit from an original total of 90 machines. It was originally intended for another NYPRO plant but, as part of the site relocation, has now been released for sale. The order confirmation from ENGEL to NYPRO can be found in the documents. The original new price was approximately €330,000, including the crane. Please note: Items 10.0064 to 10.0070 (eFlomo) are not included in the scope of supply! This was not implemented. Everything else as per the order confirmation is fully installed in the machine. I can provide you with the technical data upon request. Included in the price: dismantling the crane and packing it onto two Europallets. Also, removing the machine from the cleanroom and loading it onto your truck using a 15-ton forklift. Kdodpfjwb Dl Tox Ag Asu If you are interested or have any questions, please do not hesitate to contact me. The machine is located at the Nypro facility near Karlsruhe and can be inspected there. Delivery is possible within a few days. Below, in the documents, you will find the order confirmation from ENGEL to Nypro!

Condition: like new (used), machine/vehicle number: B-03, 1 Plastic Injection Molding Machine, Cincinnati Milacron, Machine No. B-03, 500-ton clamping capacity, hydraulic clamping unit, 3.15 in (80 mm) screw diameter, 1,531 g injection capacity, 2,610 psi maximum hydraulic pressure, 20,880 psi maximum plastic pressure, 12.60 in maximum shot size, 34.30 x 34.30 in tie-bar spacing, 8.50 in minimum mold height, and 55.10 in maximum clamp opening. Kdsdjz Svuwopfx Ag Aju ESPAÑOL: 1 Máquina inyectora de plástico MARCA Cincinnati Milacron, No. de máquina B-03, capacidad de cierre 500 Ton, unidad de cierre hidráulica, diámetro de tornillo 3.15 in (80 mm), capacidad de inyección 1,531 g, presión hidráulica máxima 2,610 psi, presión plástica máxima 20,880 psi, tamaño máximo de disparo 12.60 in, distancia entre barras 34.30 x 34.30 in, altura mínima de molde 8.50 in y apertura máxima de clamp 55.10 in.

Condition: used, Year of construction: 2011, operating hours: 66,800 h, clamping force: 100 kN, displacement volume: 85 cm³, injection pressure: 2,000 bar, overall weight: 4,500 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Kodpfxjzx Hkks Ag Aedu

Year of construction: 2000, condition: ready for operation (used), Clamping force: 3000kN, stroke volume: 1047cm³, shot weight: 953g, injection pressure: 1778bar, screw diameter: 70mm, tie-bar spacing: 630mm, opening stroke: 1150mm, ejector stroke: 200mm, installation height: 330mm, platen width: 1050mm, platen height: 995mm. Machine dimensions X/Y/Z: approx. 6250mm/2050mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible. Kdjdpezcyqtjfx Ag Aeu

Condition: repair required (used), Year of construction: 1998, functionality: not functional, For sale: Demag 110 9 t machine, year 1998. The machine is not operational and requires refurbishment. Kodpox A Sptjfx Ag Asdu

Condition: used, A Demag all-electric injection molding machine with Wittmann 3-axis robot and safety enclosure is offered. Clamping force: 1500kN, locking force: 1650kN, max. mold opening stroke: 495mm, min./max. mold height: 275mm/585mm, max. distance between mold platens: 1080mm, mold platens X/Y: 770mm/770mm, clear distance between tie bars X/Y: 520mm/520mm, max. mold weight: 1700kg, max. mold weight on the movable mold platen: 1150kg, ejector stroke: 125mm, ejector force: 35kN, ejector retraction force: 35kN, screw diameter: 35mm, L/D ratio: 20, max. injection pressure: 2430bar, stroke volume: 166cm³, shot weight: 146g, max. metering stroke: 173mm, max. nozzle stroke: 400mm, nozzle immersion depth: 20mm, nozzle contact force: 30kN, installed barrel heating capacity: 9.4kW, material hopper capacity: 35l, control: CDIAS, operating hours: approx. 76000h, machine weight: approx. 7400kg. Including WITTMANN 3-axis robot, year of manufacture: 2006, travel X/Y/Z: 550mm/1200mm/2000mm, robot weight: approx. 240kg as well as safety enclosure and 1x core pull preparation AS. Documentation available. An on-site inspection is possible. Kdjdpfs Aa Alwsx Ag Aeu

Condition: good (used), Manufacturer: DEMAG Year of manufacture: 1995 Machine number: 878-0140 Operating hours: h Type: Ergotech 250-1450 system Control system: NC4 Screw diameter: 60 mm Displacement: 763 cm³ Injection weight: 690 g Injection pressure: 1,905 bar Clamping unit: Clamping force: 250 t Holding force: 275 t Opening stroke: 675 mm Minimum/maximum tool mounting height: 330 / 710 mm Ejector stroke: 200 mm Ejector plate dimensions: 950 x 950 mm Ksdpfx Ago Aaz Tae Asdu Tie bar spacing: 630 x 630 mm Plate distance: 1,385 mm Condition: good, ready for operation Equipment: 4 core pulls Handling: Robot System DR 322 Travel ranges x – y – z: 800 x 1,600 x 3,000 mm Heater connection: 27 kW Screw drive connection: 35 kW Weight: 13.5 t Dimensions: 6,400 x 1,900 x 2,300 mm

Condition: reconditioned (used), Year of construction: 2004, Krauss-Maffei KM 650-3500 C 1 Ksdpfx Agohy Nnbo Ajdu 650 tons Krauss-Maffei injection moulding machine from 2004 with 45.000 working hours in automatic-cycle. Machine will be delivered full checked tested and reconditioned by our team. Equipment: 6 neum. cscade, 24 hot runner zones, 1 core in fix platen, 1 core in moving platen, electrical screw-drive. Ask us for the start up service with warranty of working condition. Technical details CLAMPING FORCE 6.500 kN PLATEN SIZE 1.540 x 1.440 mm DISTANCE BETWEEN TIE BARS (h x v) 1.110 x 960 mm TRAVEL OPENING 1.150 mm DAYLIGHT MAX 1.750 mm SCREW DIAMETER 90 mm MIN. MOULD HIGHT 600 mm YEAR OF BUILDING 2004 INJECTION VOLUMEN 1.953 cm3 SHOTWEIGHT 1.777 grms INJECTION PRESSURE 1.742 bar This machine will be delivered complete checked, repaired and tested at our workshop and can be shown under power !

Condition: ready for operation (used), Year of construction: 1999, operating hours: 57,830 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,047 cm³, Clamping force 3000 kN Mould opening force, max. 160 kN Travel force movable platen opening 86 kN Kdjdpfx Aoy Nk Tajg Aou Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit: Screw diameter 70 mm Ls/D ratio 20 Injection pressure 1778 bar Stroke volume 1047 ccm Shot weight (PS) 953 gr. Injection rate 400 ccm/s Screw speed 218 1/min Plasticising rate max. 75 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 35 kW Adjustable barrel heating zones 6 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 12500 kg Max. mould weight 3430 kg Accessories: - Anti vibration pads Additional Options: - 1 x Air valve - 3 x Core pulls - Robot interface according to Euromap 12

Condition: used, Year of construction: 2010, operating hours: 55,000 h, clamping force: 110 kN, displacement volume: 113 cm³, injection pressure: 2,543 bar, overall weight: 7,200 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request Kodoy Ntl Sepfx Ag Aedu terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2001, Technical details: screw diameter: 30 mm closing force max.: 2000/ bei 175 bar kN Kdsdpfx Asu Nu N Rsg Asu opening force: 10 t screw revolutions per minute : 100 U/min control: FA-Inject 2000SIJECT OP37 system pressure: 175 bar injection pressure max.: 1600 bar injection volume max.: 800 cm³ closing speed: 200 mm/min ejection stroke: 150 mm force of ejector: 120 kN opening stroke: 550 mm daylight: 700 mm total power requirement: 36,5 kW weight of the machine ca.: 6,0 t dimension machine xH: 3,0x1,9x3,9 m dimensions electric cabinet LxWxH: 0,8x0,6x2,15 m Plastic Injection Molding Machine - Elastomer Injection Moulding Machine - with heatable support table and heatable tool supporting plate - best suited for the production of special sealing products - tank volume hydraulics 110 l, heating and cooling method thermal oil circulation system, nozzles stroke 20mm - nozzle type: single nozzle, heating capacity per heating plate: 8,1 kW, heating plate size 600x500mm, heating plate temperature=250°C The machine is not connected. We sell the machine as described and as is *

Condition: used, Year of construction: 2006, Injection moulding machine Krauss Maffei KM 800-4300 MX, year 2006 The machine is equipped as follows: - 5 hydraulic cascade controls - Injection unit with a 90 Kodpfx Ajxurg Neg Ajdu - MT5 control system - Krauss Maffei handling system - 2 conveyor belts

Condition: used, Year of construction: 2006, Injection moulding machine Krauss Maffei KM 800-4300 MX, year 2006 The machine is equipped as follows: - 5 hydraulic cascade controls - Injection unit with a 90 - MT5 control system Kdedpfxow Hwr Dj Ag Aou - Krauss Maffei handling system - 2 conveyor belts

Condition: used, Injection molding machine ARBURG, Type Allrounder 320 C 600-100 Serial No. 189356, Year of manufacture 09/2002 Clamping force 60 tons Screw diameter 25 mm Dosing volume max. 49 cm3 Injection pressure max. 1570 bar Opening stroke - platen stroke max. 350 mm Platen dimensions 446 x 446 mm Tie bar spacing 320 x 320 mm Mold height min.: 200 mm Platen spacing min.: 200 mm Platen spacing max.: 550 mm Centering of fixed and moving platens 125 mm Heater power 4.9 kW Motor power hydraulic pump 15 kW Mains connection 400 Volt, 50 Hz, 19.9 kW - Machine control SELOGICA - Two controllable hydraulic circuits for core pullers - Injection unit with COLORTRONIC material hopper for automated granule feed - U-version interface - HHG interface - Control ARBURG MULTRONICA with foil keypad and integrated display - 88790 operating hours recorded (power-on hours) - 44925 operating hours of the hydraulic pump (hydraulic on) - Control cabinet fixed to the machine - Work area protective doors at the front and rear, manually sliding with safety switches Kodpfx Aezqglrog Aedu - Mobile control panel with function keys, mounted on the back of the machine Space requirement L x W 3650 x 1700 mm Height with material hopper 2200 mm Weight 3000 kg Good condition

Condition: good (used), Year of construction: 2013, operating hours: 71,000 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, total length: 4,400 mm, total width: 1,900 mm, total height: 2,000 mm, overall weight: 5,280 kg, warehouse no.: 503728 manufacturer: ARBURG type: Allrounder 470 E 1000-290 controller: Selogica year of construction: 2013 operation hours: 71000 h technical data clamping unit clamping force: 1000 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 637 x 637 mm Kdodpfx Agjz Eaumo Asu min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 850 mm opening stroke: 350 mm ejector stroke: 175 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 760 kg technical data injection unit screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar screw length: 20 l/d screw stroke: 150 mm screw torque: 380 N plasticising rate: 20 g/s PS injection rate into the open: 113 g/s PS number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 4.4m x 1.9m x 2m total weight: 5280KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. Handling Anti vibration mounts mould heating 6x technical data robot-system handling type: Linear manufacture: ARBURG controller: Multilift 6 kg year of construction: 2013

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Kdedsymn Nfepfx Ag Asu Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: good (used), Year of construction: 2011, operating hours: 59,000 h, functionality: fully functional, clamping force: 250 kN, screw diameter: 30 mm, clearance between the columns: 270 mm, injection pressure: 2,000 bar, total length: 3,180 mm, total width: 1,430 mm, total height: 1,850 mm, overall weight: 2,110 kg, warehouse no.: 503725 manufacturer: ARBURG type: Allrounder 270 S 250-170 controller: SELOGICA year of construction: 2011 operation hours: 59000 h technical data clamping unit clamping force: 250 kN distance between tie-bars h x v: 270 x 270 mm size of mould plates h x v: 380 x 380 mm min. mould height: 200 mm max. open daylight: 550 mm opening stroke: 350 mm ejector stroke: 100 mm ejector force: 20 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm technical data injection unit screw diameter: 30 mm swept volume: 85 ccm injection pressure: 2000 bar screw length: 20 l/d screw torque: 250 N injection rate into the open: 96 g/s PS number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 3.18m x 1.43m x 1.85m total weight: 2110KG Kodpfjz Eax Ejx Ag Asdu equipment included incl. Spruepicker screen text german screen text german core pulling hydraulically 1x Anti vibration mounts

Condition: excellent (used), Year of construction: 2011, operating hours: 78,454 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, displacement volume: 678 cm³, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, Equipment: documentation/manual, warehouse no.: 503393 manufacturer: KRAUSS MAFFEI type: KM 300-1400 CX controller: MC5 year of construction: 2011 operation hours: 78454 h clamping force: 3000 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included: Kdjdpfx Agoz A U Ive Aju Machine WITHOUT robot!! screen text german CEE-socket 16A pressure accumulator for parallel function of hydr.ejector and core pulling core pulling hydraulically 2x machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface for handling Schuko-socket 10A measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG

Condition: excellent (used), Year of construction: 2020, KRAUSSMAFFEI KM 201-380 PX electric injection molding machine Year of manufacture: 2020 Operating hours: 21,849 h Clamping force: 2,000 kN (200 tons) Control system: MC6 Drive system: servo-electric with servo-hydraulic components Machine characteristics • Five-point, double toggle mechanism for the clamping unit, three-platen design. • Servo-electric drive for the clamping unit. • Servo-electric drive for injection and plasticizing. • Servo-hydraulic drive for the injection unit movement. • MC6 control system based on an industrial computer with real-time Ethernet communication. • Plasticizing unit for thermoplastics with a 40 mm diameter screw. Clamping unit Parameter Value Clamping force 2,000 kN (200 t) Mold opening force 300 kN Mounting plate dimensions (H × V) 870 × 820 mm Distance between columns (H × V) 635 × 585 mm Mold opening stroke 500 mm Minimum mold height 250 mm Maximum mold height 550 mm Maximum plate clearance 1,050 mm Ejector stroke 200 mm Ejector force forward / backward 39 / 19 kN Ejector speed 350 mm/s Injection unit Parameter Value Screw diameter 40 mm L/D ratio 20:1 Maximum injection pressure 1,860 bar Injection volume 201 cm³ Injection shot weight 183 g Injection speed 125 mm/s Injection rate 157 cm³/s Maximum screw speed 334 rpm Ksdpjz Szncjfx Ag Ajdu Plasticizing rate 24.7 g/s Screw torque 337 Nm Nozzle clamping force 34 kN Nozzle radius 10 mm Nozzle orifice diameter 4 mm Electrical and hydraulic parameters Parameter Value Connected load 13.8 kW Electrical protection 63 A Installed heater power 11.5 kW Number of cylinder heating zones 5 Dry cycle time according to EUROMAP 6 2.0 s / 445 mm Oil tank capacity 200 l Weight and dimensions Parameter Value Net weight with control cabinet 14,300 kg Machine length 6,120 mm Machine width 2,170 mm Machine height 2,210 mm

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Sumitomo DEMAG Systec 170/520-600 NC 5 Year of manufacture: 2008 Control system: NC 5 Screw: 45mm Injection volume: 323ccm / 294g Clamping force: 1700KN Tie-bar spacing: 520mm x 520mm Mold height: min 275mm - max 585mm Maximum plate spacing: 1085mm Opening stroke: 500mm Ejector stroke: 160mm Core pull: 2x Pneumatic valve: 1x Kdsdpsz Rkmfofx Ag Aou Equipment: Core pull, 2-circuit, serial to tool movement on the movable platen Pneumatic valve 5/2, No. 1, on the movable tool platen Ejector parallel to the tool movement Clamping force controlled Freely programmable inputs/outputs (3 inputs/3 outputs) 3 in/3 out, freely programmable Start/stop program (with purging) Interface for handling, Euromap 67 (50-pin) Interface for tool protection (ejector plate safeguard) Plug-in ejector plate safeguard Integrated hot runner control, 8 zones Tool protection Switch-off of tool cooling Closed-loop clamping force control Active mold protection via sensor Hydraulic screw drive, high speed Temperature control of cooling feed zone Follow-up pressure switchover WID 1 circuit Back pressure programmable Injection via DFE pump, speed closed-loop Intrusion Reduced nozzle sealing force at open mold, programmable Process data recording (PDE) with graphics and control Extended storage for process/mold data and report lists on internal memory Program for storing process data on external memory Switch-on/off program with purging Flexible clamping sequence with ejector and cores Amendment report Event history Help function, integrated hints via control Detailed hints via control Preventive maintenance program 2 freely programmable screens Intrusion 2x socket combination 380V, 230V Printer Change journal PDE control, graphics ERGOStart The machine is currently being overhauled and tested for functionality.

Condition: used, Year of construction: 2010, Injection moulding machine Arburg 370H 600-290, year 2010, incl. Wittmann picker Injection moulding machine Arburg 470C 1500-400, year 2006, incl. Wittmann handling Kdodpfsy R Tg Ejx Ag Aeu

Condition: like new (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: H39A0200012, Plastic INJECTION MOLDING MACHINE, Make: MILACRON, Model: ML 3000-540, Serial Number: H39A0200012, Year: 2001, 3,000-ton clamping capacity; platen dimensions: 2.56 × 3.06 m, tie bar spacing (H × V): 1.70 × 2.11 m, knockout (KO) patterns: 3.15 × 0.41 m, 1.63 × 0.41 m, 1.83 × 0.41 m, and 1.83 × 0.71 m, mold height: 0.60 m, maximum daylight: 3.70 m, ejector stroke: 0.40 m, Air Eject, oil capacity: 2,669 L. Approximate overall dimensions: 15.42 m long × 4.70 m wide × 3.66 m high. Equipped with YUSHIN Cartesian Robot, Model: MKA, Serial Number: A245158, 220 V. Machine in full operating condition. Please inspect. Kodoz Svrpopfx Ag Aedu ESPAÑOL: Máquina de moldeo por INYECCION DE PLASTICO marca: MILACRON, modelo: ML 3000-540, número de serie: H39A0200012, año: 2001, capacidad de cierre de 3,000 toneladas. platina de 2.56 × 3.06 m, distancia entre barras (H × V) de 1.70 × 2.11 m, patrones de expulsión (KO Patterns) de 3.15 × 0.41 m, 1.63 × 0.41 m, 1.83 × 0.41 m y 1.83 × 0.71 m, altura de molde de 0.60 m, apertura máxima (Max. Daylight) de 3.70 m, carrera de expulsión de 0.40 m, Air Eject, capacidad de aceite de 2,669 L. Dimensiones generales aproximadas: 15.42 m largo × 4.70 m ancho × 3.66 m alto. Equipada con: Robot Cartisano marca: YUSHIN, modelo: MKA, número de serie: A245158, 220V. Máquina en completa operación. favor de inspeccionar.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,164 h, General Data Machine weight 19400 kg Measurements height 2300 mm Dimensions Machine Length 5861 mm Injection Unit Ksdpsx Nr Rtefx Ag Asdu Screw diameter 60 mm Clamping Unit Clamping force 2600 kN This Engel VICTORY 1350/260 tech was manufactured in 2012. It features a clamping force of 260 tons, a maximum injection volume of 735 cm³, and a screw diameter of 60 mm. The machine dimensions are 5,861 × 1,923 × 2,300 mm, and it weighs 19,400 kg. Currently in production with excellent condition and 73,164 operating hours. Contact us for more information about this machine. Application Types Injection Moulding