Used Index Ms16C for sale (1,304)

Condition: new, power: 167 kW (227.06 HP), fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Equipment: * 12t distribution axle, extended day cab, roof-mounted air intake * Mechanically reinforced cab suspension * Extended day cab * Central locking, 3 keys, 2 remote controls * Green translucent exterior sun visor * Fog lights and cornering/turning lights * Halogen headlights * Daytime running lights * Green-tinted windows * Side and rear windows non-glazed * 5 mirrors * Electrically adjustable mirrors * Front view mirror * Mirror brackets for body width 2.50 - 2.60 m * Headlight beams for right-hand traffic * Reversing camera * Adjustable roof spoiler * ETD white * Headlamp surround and bumper in cab color * Roof spoiler in cab color * Cab steps and wheel arches in cab color * Chassis painted anthracite grey * Pneumatic steering column lock * Roof hatch with manual operation * Driver seat: air-suspended luxury driver's seat * Armrest driver's seat * ECAS remote control * Converter 24V to 12V, 15A, 180W * Left-hand drive * Soft-touch steering wheel, color black * Black seat belts * Passenger seat: fixed, velour * Engine tunnel storage compartment * Air conditioning * Power windows, electric * Digital tachograph, VDO 1C, version G2V2 * Adaptive cruise control with FCW and AEBS-3 * Pre-installation for toll system * Speed limiter setting 85 km/h * PACCAR Connect * Antennas: AM/FM + GSM + GPS * FMS interface, pre-wired * FM/DAB/DAB+ radio with speakers incl. phone connection * Driver Performance Assistant * Lane change warning system * Electronic Stability Control (VSC) * Reversing warning system * Basic immobilizer * Hill start assist * DAF Side and Turn Assist * Alcohol interlock, pre-installed * Speed limit recognition * DAF Drowsiness Detection * Conforms with UN regulations R155 and R156 * Rear: 8.50 t, air suspension, SR8.14 * Front: 4.50 t, parabolic, 45N * Front axle 1, 4,480 kg, load index 136 * Rear axle 1, 8,480 kg, load index 134 * Silver-grey wheel trims * Tire pressure monitoring system * Front axle(s): 245/70R17.5 * Driven rear axle(s): 245/70R17.5 * Steel disc wheels, silver-grey * F1, 245/70R17.5 GO KMAXS2 136/134 M Steering CCA 3P Ledpfxox Hmz Is Agtshk * R1, 245/70R17.5 GO KMAXD2 136/134 M Traction CCA 3P * RR, not applicable * Rear axle ratio 3.73 * Mechanical differential lock * 8-speed PowerLine 8AP1000 overdrive gearbox, 4.89-0.64 * PX-7 engine, 167 kW/227 hp. Cab badge: 230 * Emissions class Euro 6 * Traction control (ASR) * Idle shutdown automatic, 5 minutes * PowerLine automatic transmission, 8-speed * Parking brake actuation with test position * Exhaust brake * Wheelbase 5.40 m / rear overhang 2.43 m * One wheel chock * Plastic fuel tank, 185 l * Standard component arrangement * Front underrun protection * Splash guard * AdBlue® tank 30 l, right chassis side * Fuel tank on the left * AdBlue® tank filler cap without lock * Temporary rear light brackets * Rear lights with bulbs * Battery box on the left, no spare wheel mount * Longitudinal members 210/6.0 mm, without internal reinforcement * EAS unit on right, discharge to the rear right * For operation with drawbar trailer, type plate up to max. GVW * Pneumatic trailer connection, turntable coupling * Crossmember D85-Dc70-V25, coupling D85, mounted * Trailer electrical connection + EBS, 24V/2x7-pin * Body mounting: BAM 1, loose brackets * Fixed connection for engine speed control chassis * Body connector on chassis * Side marker lights * Tail lift application * Alternator 100A, batteries 2 x 175 Ah * Technically permissible GVW

Condition: excellent (used), Professional face mill from the renowned brand GARANT (Hoffmann Group), designed for high-performance machining. Overall diameter: 200 mm. Mounting hole: 60 mm. Equipped with indexable inserts – easy handling, suitable for work under heavy industrial conditions. Very good condition, the tool is ready for use. An ideal choice for use in machining centers and industrial milling machines. Lsdpfow Sav Usx Agtjhk

Condition: good (used), Dividing head Brand: presumably WMW Spindle taper: MK 3 – drawbar required Indexing plate diameter: 170 mm Lsdpfewy Hlgjx Agtshk Hole division: 15 7 16 7 17 / 18 / 19 / 21 / 23 / 27 Mounting surface: 235 x 185 mm Accessories: Dimensions: 340 x 280 x 350 mm Weight dividing head: 39 kg

Condition: excellent (used), Year of construction: 2020, operating hours: 23,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, torque: 80 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840 D SL Solution Line mit NCU 730, workpiece diameter (max.): 1,830 mm, workpiece weight (max.): 800 kg, total height: 3,500 mm, total length: 5,900 mm, total width: 3,990 mm, overall weight: 24,500 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 17,500 rpm, operating hours of spindle: 8,000 h, Equipment: chip conveyor, Horizontal double swivel-beam machining center with 2 spindles - Linear and torque motors in the feed axes - Gantry drive for the Y-axis - Independent Z-axes and X-axes - Double swivel beam with two integrated rotary axes for loading and unloading parallel to main processing time Ljdpfxjw Hgk Ae Agtehk - Siemens Sinumerik 840 D SL Solution Line control with NCU 730 - Oil distributor for NC rotary table - 1 set of clamping bridge supports - Torsion compensation - 5th axis directly driven twice - Boring head indexing - Base module for clamping hydraulics - Pneumatic pressure intensifier - Scraper belt conveyor - Automatic loading door - Emulsion mist extraction unit - Automatic rinsing cycle for loading area - Tool flatness monitoring - Position monitoring, base module and extension - Grating/walk-on grid - 24 quick-release couplings SW-ID No. 413288 - Tool breakage monitoring, inductive etc.

Condition: not inspected (used), Year of construction: 1969, Manufacturer: Steinel Model: 6-Station BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical specifications: 6-station rotary transfer special-purpose drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 pcs Station 1 – Loading and unloading Station 2 – Vertical drilling unit, type: BE 10 VK Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit, type: BE 6 VK Station 5 – Horizontal spindle unit, type: BE VK, with additional guide. Mounting: slip bush Ø 28 mm Station 6 – Horizontal drilling unit and vertical tapping unit, type: BE 6 VK Feed advance for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary index table: mechanically indexed in 8 positions, Ø 400 mm Workpiece clamping: manual, via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380V, 50 Hz Accessories / Special equipment: Lodpfx Asw H I R Rjgtohk • The machine is designed for mass production use • The machine is equipped with a robust cast iron machine table with chip disposal at the rear and a separate large coolant tank (rear outlet) • Safety light curtain (Sick) • Extensive accessories: spare parts, spindle units, and rotary indexing table • The machine features a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Condition: ready for operation (used), Year of construction: 2001, operating hours: 18,500 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller model: CNC OSP 100M, rotational speed (max.): 5,000 rpm, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS Travel range, X-axis: 700 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 700 mm Rotary table/B-axis: indexed in 1° steps, 360 positions Lsdpfxsy S S U Ds Agtshk Spindle speed: 25 - 5,000 rpm Type of input current: Three-phase Pallet size (2x): 500 mm x 500 mm Table size: 500 mm x 500 mm Table load: 800 kg Distance spindle nose to table surface: 150 mm - 850 mm Tool holder: MAS BT 50 Tool magazine (ATC): 60 positions, chain magazine Tool length max.: 450 mm MACHINE DETAILS Control: CNC OSP 100M Dimensions & Weight Dimensions (L x W x H): 5,500 mm x 3,160 mm x 3,300 mm Machine weight: 21,000 kg Spindle hours: 18,500 h EQUIPMENT Chip conveyor Coolant system Pocket filter system for internal cooling Spindle speed, continuously adjustable

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, total width: 4,325 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, tool weight: 30,000 g, product length (max.): 8,150 mm, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. • Max. workpiece diameter: 1450 mm • Max. workpiece weight: 2000 kg • Travel (X/Y/Z): 1400 x 1050 x 1200 mm • Pallet size: 800 x 800 mm • Spindle motor power: 22/35 kW • Max. torque: 1732 N·m • B-axis: indexable by degree • Max. tool diameter: 130/320 mm • Max. tool length: 630 mm Additional equipment • Belt-type oil skimmer • Triple light tower Lhsdezar Aiepfx Agtek • Pallet centering device • Shower coolant • Through-spindle coolant 70 bar, 7.5 kW, with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Dimensions Machine Depth 8150 mm Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,677 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 9,000 rpm, number of axes: 4, This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details. • Machine ON time: 41,712 hours • Measuring system: Linear position measuring system in all three axes • Handwheel: Heidenhain HR 410 electronic handwheel • Tool changer: Included • Machine access: Side doors with windows (left and right) Additional equipment • Tool probe: m&h Inprocess 3D tool sensor (Type m&h TS35.10) • Workpiece probe: m&h Infrared workpiece touch probe (Type 25.00 SK40-02) • 4th axis: Walter CDS 22 motorized rotary table/indexing head with original control unit Ledpfx Ajy Ifp Hogtshk • Rotary table features: 3-jaw chuck, RS232 interface, digital angle input Technical Specification Taper Size SK 40

Condition: reconditioned (used), Year of construction: 2014, operating hours: 9,132 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, spindle motor power: 3,700 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 32 m/min, overall weight: 1,750 kg, bar passage: 20 mm, Equipment: documentation/manual, Swiss-type CNC Lathe TSUGAMI B0206E-II TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC series 32i-B Number of axes: 6 Rapid traverse rate X1 axis: 24000 [mm/min] Rapid traverse rate X2 axis: 24000 [mm/min] Rapid traverse rate Z1 axis: 32000 [mm/min] Rapid traverse rate Z2 axis: 32000 [mm/min] Rapid traverse rate Y1 axis: 15000 [mm/min] Rapid traverse rate Y2 axis:15000 [mm/min] Max. bar diameter: 20 [mm] Min. spindle speed: 200 [rpm] Max. spindle speed: 10000 [rpm] Increment C-axis: 0.001 [°] Spindle power: 3.7 [kW] Min. counter spindle spindle speed: 200 [rpm] Max. counter spindle speed: 12000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 2.2 [kW] Number of positions end attachment: 8 Number of positions guide bush holder 1: 5 Number of motorized positions guide bush holder 1: 3 Live tools speed guide bush holder 1: 8000 [rpm] Number of positions secondary operation: 8 Number of motorized positions secondary operation: 4 Live tools speed secondary operation: 8000 [rpm] Max. tool holder cross-section: 12 x 12 [mm] Working hours: 9132 [h] Weight: 1750 [Kg] INCLUDED EQUIPMENT: x1 sliding headstock (direct drive) x1 counter spindle (direct drive) x1 rotary guide bush (direct drive) x108 collets x7 live tool holders x1 parts catcher x1 parts conveyor belt x1 parts ejection device x1 chip conveyor x1 coolant tank x1 oil mist extraction unit, 3nine LINA type x1 IEMCA ELITE 220 E / 32 XL bar feeder x1 set of accessories for IEMCA ELITE 220 E / 32 XL bar feeder x1 fire protection system - to be inspected by the buyer through a certified organization x1 electrical transformer x1 3-color status light x1 set of IEMCA manuals x1 set of FANUC manuals Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Citizen, Nomura, Tornos, Miyano, Index, Traub, and Star lathes, as well as machining centers, milling machines, and grinding machines. Ledjy Eff Ajpfx Agtohk

Condition: used, Year of construction: 1993, Automatic Aerosol filling and crimping machine. Spray bottle equipment. Cycle = Blowing / Product filling / Valve installation / Valve crimping / Gas filling / Pressure control / Pump installation / Cover installation – Aerosol 30 ml – Current format: 30 ml filling on bottles d.43 x h.86 mm, valve neck 20 mm – Dosing with Hibar pumps HDB-2B-CV – Cap / cover installation – RNA bowl feeding valves + caps – Double index – Capacity: approx. 70 units / minute – year 1993 – Continuous control by PLC– 18 position tray + technical file available on request – Plan entry/exit conveyor belt Lodpfx Agszg I Tpstehk Perfect line for all pump spray product.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Max turning diam 530mm, max turning length 1,025mm Main spindle A2-8, 38-3,800Rpm, bore 80mm, 22 Kw. Chuck 210mm. Sub spindle A2-6, 5,000Rpm, bore 62mm, 22 Kw. Chuck 200mm. X 475mm, Z 1,170mm, Y 160mm, B axis Capto C6, 200-6,000Rpm, cooling through spindle 30 bar. Index 1 dg. Lower turret 12 pos VDI 40. ATC 44 pos. SMW SLU2 hydraulic steady 12-110mm diam. Thermal heat compensation, type TAS-C. 45° B axis indexing for multitools. Helical machining. Tool wear offset function. Tool reteact function. Ledpfszghc Dex Agtjhk Tool-Offset 200 pos. Control OSP-E100M. Absoscales XA / XB. Portal loader Fastem / Fanuc.

Year of construction: 2005, condition: used, Rotary indexing machine Kneissler KE 8-180D, manufactured in 2005. Lhsdpfx Asziz Rgogtjk

Condition: new, power: 355 kW (482.67 HP), fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro4, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Equipment: * Air-suspended cab * Laminated safety glass with sun protection film * Central locking, 3 keys, 2 remote controls * Windshield with sun protection film * Exterior sun visor * Two LED headlights for the rear of the cab * Rear view camera with preparation for 2nd camera * DAF Corner View * Handle and step, trim: Black, side: Darkened * LED headlights and fog lights * Front chassis execution: Base plate * XG cab * Digital vision system from DAF * Headlight beam pattern for right-hand traffic * Headlights without height adjustment * LED skylights * LED daytime running lights * Side fenders, extended. One side foldable * Side trim * Adjustable roof spoiler for XG cab * Lower cab step: Crystal White * Chassis color: Anthracite gray * CRYSTAL WHITE * Color of headlight trim: Crystal White * Color of bumper: Crystal White * Without function: Mirror housing color * Color of roof spoiler: Crystal White * Color of side fender: Crystal White * Color of side skirt: Crystal White * DDVS housing color: Crystal White * Roof hatch with electric operation * Auxiliary air conditioning, integrated * Driver's seat: Luxury Air * Preparation for compressed air system * Passenger seat: Cinema and step, table, fabric upholstery * Driver's seat, swivel base * Xtra Comfort mattress, adjustable under the upper bunk * Upper bunk * Automatic cab climate control * Curtains with partition curtain * Refrigerator and drawer * Armrests on both sides of the driver's seat * Storage compartment with drawer in the center console * Accessory power supply: Standard + 2x 40 A * ECAS remote control with extended functions * Color of interior trim: Exclusive * Cab wall lining: Textile * Dashboard table * Steering wheel with silver accents * Door trim: Loosely woven fabric * Cab, interior trim: Hexagon * Passenger seat, fixed base * Safety net on both bunks * Dashboard design: Plateau * LED interior lighting * Parking heater with waste heat pump and timer * Wireless charger * Digital tachograph, VDO version G2V2A * Speed limiter setting: 90 km/h * PACCAR Connect with navigation * Antennas: Radio, 2x mobile phone, GNSS, extra: CB * FMS connector, extended and prepared * Infotainment including DAF Truck Navigation * Speakers: Luxury * Adaptive Cruise Control with FCW and AEBS-3 * Predictive Cruise Control * Preparation for toll system * Driver Performance Assistant * Rear view warning system * Main switch chassis Ljdpfjzihz Eox Agtjhk * Lane change warning system * Hill start assist * DAF Side and Turn Assist * Electronic Stability Control (VSC) * Speed limit recognition * DAF Drowsiness and Distraction Detection * Standard immobilizer * Alcohol interlock, prepared * Axle load monitoring * Front air suspension: low * Front: 8.00 t, air suspension, 161 N * Front axle 1, 8,000 kg, load index 156 * Rear axle load capacity 11,50 t * Rear axle 1, 11,500 kg, load index 145 * One driving height position, standard height * Rear: Air suspension SR1344 * Front axle(s): 355/50R22.5 * Driven rear axle(s): 295/60R22.5 * F1, 355/50R22.5GO GFSND 156/000 K Steering BBA 3P * R1, 295/60R22.5GO FMDE 150/147 K Traction BBB 3P * Wheel rims, silver-gray * Goodyear * Tire pressure monitoring system * Steel disc wheels, silver-gray * Mechanical differential lock * MX-13 engine, 355kW/483hp Cab emblem: 480 * Emission class Euro 6 * Standard transport, full version * Shunting mode * Eco-Fuel

Condition: good (used), Details - Agie Mondo 50 Specifications X-axis (longitudinal) 497.8 mm Y-axis (transversal) 348 mm Z-axis (vertical) 348 mm Tank length 1018.5 mm Tank width 678.2 mm Tank height 398.8 mm Type CNC type AGIE FUTURA IV Table length 749.3 mm Table width 548.6 mm Maximum workpiece length 858.5 mm Maximum workpiece width 647.7 mm Maximum workpiece height 315 mm Maximum workpiece weight 499.1 kg Maximum generator current 64 A ----- Dimensions (L x W x H) 1549.4 × 1955.8 × 2336.8 Ledpfx Aozkcf Ijgtohk Weight 2131.1 kg *Factory-installed options - Plate 2* Option Ref. No. Purpose CAPACITANCE OPTION U05.629.7 Finer spark gap detection. Better surface finish. I/O MODULE ASSY. U05.759.2 Input/output module for automation. HEAT EXCHANGER U06.126.3 Water/oil heat exchanger to stabilize the dielectric fluid. Important. FILTER/REG/LUB U05.316.1 Air FRL unit for the cabinet. Standard. C-AXIS U06.831.8 4th rotary axis installed. Allows for indexing. TOOLCHANGER ASSY. U06.154.3 Automatic electrode changer. Major option, rare. PROGRAMMABLE FL. U06.756.7 Programmable flushing system. For deep machining.

Condition: used, Year of construction: 2004, power: 37 kW (50.31 HP), travel distance X-axis: 1,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Okuma, total height: 3,280 mm, total length: 6,500 mm, total width: 3,460 mm, table width: 630 mm, controller model: OSP-E100M, spindle speed (min.): 12,000 rpm, table height: 630 mm, Okuma MA-600 HB Space Center OSP E 100M control Dimensions pallet 630 x 630 mm Number of pallets 2x X-axis travel 1000 mm Y-axis travel: 950 mm Z-axis travel 1000 mm Indexing of table 1° Spindle holder MAS BT 50 Spindle speed 12,000 rpm Spindle motor 37/26 kW Lhjdpfxoy N Afuo Agtjk Positions in the tool magazine 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 710 mm, controller manufacturer: Fanuc, controller model: 160is-MB, total height: 2,771 mm, total length: 5,855 mm, total width: 2,555 mm, table width: 500 mm, table length: 500 mm, table load: 400 kg, overall weight: 8,200 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, CNC Horizontal Machining Centre Lhodsy N Ax Uepfx Agtsk CNC Control Fanuc 160is-MB Pallet table size 500 x 500 mm Number of pallets 2x Table load 400 kg X-axis travel: 630 mm Y-axis travel: 620 mm Z-axis travel: 710 mm Indexing of table 0,001° Spindle holder MAS BBT 40 Spindle speed 100 - 12.000 rpm Spindle motor 11/7,5 kW Positions in the tool magazine 60 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. We sell this machine at a special price called “as seen”. This means that we do not check the condition of the machine.

Condition: good (used), Code: 0360 Brand: GMC - ITALY Model: KGS 400/E - CE Standard Lhedoy Du Nzspfx Agtjk Manual vertical panel saw with scoring unit for cutting panels, furniture, customer made furniture, kitchens, plastics, composite materials, aluminium and various – CE Standard Technical specifications: Cutting length 3200 mm Cutting height 1900 mm Cutting thickness 50 mm Blade diameter 250 mm Hole 20 Motor 4 Hp Scoring unit for chip-free cutting - Blade diameter mm 110 Hole 20 Circular saw shaft speed 4800 rpm Scoring saw shaft speed 7000 rpm Retractable tilting intermediate support, half-length Automatic mechanical moving frame Double lower and upper measuring index for horizontal cuts Overall dimensions of assembled machine mm 5100 x 1100 x 2800 h Overall dimensions for transport: Frame mm 5100 x 460 x 2250 h + Beam mm 2900 x 850 x 850 h Weight kg 450

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Description WE OFFER AN HIGH TECH CNC LATHE TURNING AND MILLING CENTRE MACHINE IS COME OUT FROM FORMULA 1 - MERCEDES WORKSHOP MACHINE WAS FROM NEW HIGEST POSSIBLLE MAINTAINED WITH OFFICAL MORI SEIKI TECHNICAL DATA: Mori Seiki MT2000 CNC Lathe Description: Swing over bed - 700mm, Distance between centres - 1080mm, Max turning dia meter - 550mm, Max turning length - 1020mm, Bar capacity - 65mm, X Travel - 565mm, Y Travel - +/-80mm, Z Travel - 1077mm, B Indexing - +/-120deg, X Travel Turret 2 - 155mm, Z Travel Turret 2 - 1067mm, Spindle Speed - 4500rpm, Spindle nose - JIS A2-6, Tool Spindle Speed - 6000rpm, Tool Spindle type - Capto C6, ATC - 40 Tools, Max tool length - 280mm, Max tool weight - 7kg, Turret 2 Tools - 12, Square shank - 25mm, Boring bar shank diameter - 40mm, Drive tool speed - 4000rpm, Tailstock diameter - 110mm, Tailstock spindle travel - 150mm, Taper of Tailstock - MT5 Transport information Width: 3800mm Depth: 2100mm Height: 2565mm Lhjdpszcz Dbofx Agtok Weight: 12000kg FOR CLIENT WE CAN ORGANIZE TRANSPORT WORLDWIDE

Condition: ready for operation (used), Year of construction: 2020, total height: 2,220 mm, overall weight: 14,000 kg, controller manufacturer: BOSCH, controller model: MTX, number of axes: 6, This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic Motor Power: 11 kW • Axes Drive Type (C1 and C2): Direct drive • Hydraulic Punching Force: 30 tons • Portable CNC Control Panel • Work Chute: Automatic system to take out cut parts • Mobile Storage Box for Cut Parts • Waste Box • Light Barriers Machine Benefits Technical Machine Benefits • Ce conformity • Maximum sheet thickness: 6. 4 mm • Maximum punching rate: 1 mm nibbling: 900 hits/min 25 mm nibbling: 580 hits/min • Maximum punching diameter (for 6. 4 mm thickness): 25 mm • Number of clamps: 3 Lodpszbiybsfx Agtohk • Tables: movable in y axis • Table height: 980 mm • Movable table: 1300 × 5200 mm with ball transfers Extra Information The machine is in excellent condition, has only a few hours of operation, and is like new. Control Unit Control: Bosch MTX Operating System: Windows Hard Disk: 150 GB CPU: 2 GHz RAM: 2 GB Data Transfer: USB stick memory Display: 12" TFT LCD color screen Movement Axes: 6 (X, Y, Z, C1, C2, T) Axis Speeds: X: 100 m/min Y: 80 m/min X + Y combined: 128 m/min C1 / C2 rotation: 300 rot/min T axis: 20 rot/min Repositioning: Available Positioning Accuracy: ±0.1 mm Repeatability: 0.04 mm CAM Nesting Software: Lantek Turret Tool Rotation: Indexable Multitools Support: Available (3 or 8 tools) Total Number of Tool Stations: 20 Indexable Tool Holders: Standard 4 (option up to 10) Tool Change Time (multitools): 0.3 s Maximum Tool Change Time (turret): 3 s Dimensions Machine Depth 6370 mm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 12,244 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 700 mm, spindle motor power: 11,000 W, total height: 1,620 mm, overall weight: 4,200 kg, controller manufacturer: SIEMENS, controller model: 840D-SolutionLine, number of slots in tool magazine: 16, number of axes: 2, This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2017, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine. Lhsdex D E Hnopfx Agtsk Additional equipment • Full splash guard cladding + coolant unit • Work area light + pneumatic equipment • Panoramic window for optimum visibility into the work area Machine Benefits Technical Machine Benefits • Center distance: approx. 600 mm • Max turning diameter: 310 mm • Torque: main spindle (fanuc, s6 40%) 178 nm, main spindle (siemens, s6 40%) 301 nm • Quill stroke: 120 mm • Adjustment travel: 475 mm • Speed of rotating tools: 6000 1/min • Driven tool power: (fanuc, 30 min) 3. 7 kw, (siemens, 40%) 6. 0 kw Extra Information Media Pneumatics max. operating pressure: 10 bar Normal pressure: 6 bar Hydraulics max. operating pressure: 30 bar Control Unit Control system: Standard Siemens 840D, Option Fanuc 21i Operating voltage: 400 V Mains frequency: 50/60 Hz Control voltage: 24 V DC Interfaces: USB, Ethernet, SPINNER-UNIMAG bar feed (electric) Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools Yes Taper Size VDI 30

Condition: good (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,600 mm, Manufacturer: SORALUCE Type: TL-25 Control: HeidenHain TNC 430 Year of manufacture: 1998 Aiptek ATC 30 positions Automatic head 2.5 x 2.5 Gr Central lubrication Machine housing with front doors Large tool package Specifications Metric US Standard X-axis 2500 mm Y-axis Ledpfxjv Idale Agtohk 1000 mm Z-axis 1600 mm Table length 2860 mm Table width 1000 mm Table load 7500 Spindle power 25 kW Spindle speed 0 - 3000 rpm Tool holder 50 ISO/Bt/Mk X-axis feed 10000 mm/min. Y-axis feed 10000 mm/min. Z-axis feed 10000 mm/min. Milling head auto index 2.5 x 2.5° Working hours 12500 H Dimensions (estimate) Length 6000 mm Width 3500 mm Height 3500 mm Weight 15000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, position of the milling head: 2.5 x 2.5 °, mount diameter: 50 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total width: 50,000 mm, total height: 48,750 mm, total length: 212,400 mm, table length: 12,000 mm, table width: 1,650 mm, power: 0.03 kW (0.04 HP), overall weight: 50,000 kg, X-axis: 10300mm Y-axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 1650mm Table load: 50000 Power on spindle: 22/30kW Spindle speeds: 60-3000Rpm Spindle Taper: 50ISO/Bt/Mk Lodpjrx Rtrofx Agtshk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21240mm Width: 5000mm Height: 4875mm Weight: 50000kg

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Ledpfx Asdzc Rxjgtehk Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. Ledsq Dzi Tjpfx Agtohk 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 310 mm Lodpschyxzsfx Agtehk -Height: 130 mm -Groove: mm -Dimensions: 410/380/H130 mm -Weight: 40 kg