Semi-Automatic Cutterhead GrinderNewman Whitney not Weinig Rondamat
G-716
Semi-Automatic Cutterhead Grinder
Newman Whitney not Weinig Rondamat
G-716
Condition
Ex-display machine
Location
Kehra 

Show images
Show map
Machine data
- Machine type:
- Semi-Automatic Cutterhead Grinder
- Manufacturer:
- Newman Whitney not Weinig Rondamat
- Model:
- G-716
- Condition:
- as good as new (ex-display)
PRICE & LOCATION
- Location:
- Välja 4, 74305 Kehra, EE
Call
LISTING DETAILS
- Listing ID:
- A144-06910
- Update:
- 07.07.2024
DESCRIPTION
Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!
CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!!
The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!!
No Index Plate To Change
No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots.
Head Indexing and Wheel Feed:
Manual
Minimum / Maximum Diameter Cutterhead:
7″ Min./16″Max.
178mm Min./ 406mm Max.
Worktable Feed:
Air / Oil
Travel (maximum):
12″
Bi8Jucckex8
305mm.
Adjustable Limits:
Proximity Switch
Speed:
Fully Adjustable
Index Method:
Manual index after each knife is ground.
Grinding Spindle:
1-1/2 HP Wash Down Duty TEFC Motor
3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication.
8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.)
Coolant System:
15 Gallon Tank with Casters, Sediment Tray
Full View Sight Glass, 5 GPM Pump (120VAC)
Wash Down Hose Included
Specifications
Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads
Automatic traversing worktable with adjustable travel limits
Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate
High precision 1-1/2 HP grinding spindle with sealed lubrication
Recirculating adjustable flow flooded coolant system with wash down hose
Fully enclosed grinding chamber with viewing windows and task light
Grinding wheel feed allows unattended operation.
New Proscale.
CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!!
The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!!
No Index Plate To Change
No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots.
Head Indexing and Wheel Feed:
Manual
Minimum / Maximum Diameter Cutterhead:
7″ Min./16″Max.
178mm Min./ 406mm Max.
Worktable Feed:
Air / Oil
Travel (maximum):
12″
Bi8Jucckex8
305mm.
Adjustable Limits:
Proximity Switch
Speed:
Fully Adjustable
Index Method:
Manual index after each knife is ground.
Grinding Spindle:
1-1/2 HP Wash Down Duty TEFC Motor
3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication.
8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.)
Coolant System:
15 Gallon Tank with Casters, Sediment Tray
Full View Sight Glass, 5 GPM Pump (120VAC)
Wash Down Hose Included
Specifications
Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads
Automatic traversing worktable with adjustable travel limits
Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate
High precision 1-1/2 HP grinding spindle with sealed lubrication
Recirculating adjustable flow flooded coolant system with wash down hose
Fully enclosed grinding chamber with viewing windows and task light
Grinding wheel feed allows unattended operation.
New Proscale.
SELLER
Contact person: Mr Eoin Murphy
Välja 4
74305 Kehra, Estonia
Show more

Ameks Holding OÜ has been trading in wood machinery for 21 years dealing mostly in the following types of wood machinery.
Moulders
Resaws
Handling equipment, mechanisation, automation
Toolroom equipment
Complete planing lines
Tooling
Spare parts
Moulders
Resaws
Handling equipment, mechanisation, automation
Toolroom equipment
Complete planing lines
Tooling
Spare parts
Show further legal information
Ameks Holding OÜ
Vabaõhumuuseumi tee 4A-37
13522 Tallinn.
Estonia.
Company registration code 10630297
VAT number EE100634635
Eoin Murphy
Vabaõhumuuseumi tee 4A-37
13522 Tallinn.
Estonia.
Company registration code 10630297
VAT number EE100634635
Eoin Murphy
Further legal information close
Show less
Send inquiry
TELEPHONE & FAX
+372 515 ... show
These listings may also fit your interest.
Listing

8,015 km
Sharpening machine
Schneeberger not WeinigNorma not Rondamat
Schneeberger not WeinigNorma not Rondamat
Listing

8,015 km
Automatic straight knife grinder
StehleStehle S820 not Weinig Rondamat 909
StehleStehle S820 not Weinig Rondamat 909
Listing

8,015 km
Moulder
Leventek not Weinig Almab IF-100 & OF-100
Leventek not Weinig Almab IF-100 & OF-100
Listing

8,060 km
Moulder infeed and outfeed 100 m/min
Linares not Weinig High-MechIF-100 / OF-28
Linares not Weinig High-MechIF-100 / OF-28
Listing

8,015 km
Paint finishing system
Ceetec not WeinigIPT250 Touch
Ceetec not WeinigIPT250 Touch
Listing

8,015 km
Moulder
Fischer not WeinigSFV 800 H
Fischer not WeinigSFV 800 H
Listing

8,015 km
Moulder
Thomas Pettersson not WeinigAutomatic high speed planing line 150m/m
Thomas Pettersson not WeinigAutomatic high speed planing line 150m/m
Listing

7,924 km
Diamond grinding wheel Weinig Rondamat
WeinigRondamat
WeinigRondamat
Listing

7,924 km
Diamond grinding wheel Weinig Rondamat
WeinigRondamat
WeinigRondamat
Listing

7,971 km
Knife grinding machine
Weinig Rondamat 980
Weinig Rondamat 980
Listing

8,088 km
Four sided planer Weinig U 17N 7-g
WEINIGU 17 N
WEINIGU 17 N
Listing

8,015 km
Sharpening machine
WeinigRondamat 934
WeinigRondamat 934
Listing

7,924 km
Profile knife grinding machine Weinig Rondamat 929
WeinigRondamat 929
WeinigRondamat 929
Listing

7,613 km
Sharpening machine
WEINIGRONDAMAT 912
WEINIGRONDAMAT 912
Listing

8,495 km
Sharpener
WeinigRondamat 934
WeinigRondamat 934
Listing

7,971 km
Knife grinding machine
WEINIGRondamat 960
WEINIGRondamat 960
Listing

8,483 km
Sharpener
WeinigRondamat 950
WeinigRondamat 950
Listing

8,015 km
Sharpening machine
WeinigRondamat 960
WeinigRondamat 960
Listing

7,924 km
Control panel / membrane keyboard WEINIG Rondam...
WEINIGRondamat 912
WEINIGRondamat 912
Listing

8,495 km
Head sharpener
WeinigRondamat 929
WeinigRondamat 929
Listing

7,971 km
Knife grinding machine
WEINIGRondamat 935
WEINIGRondamat 935
Listing

8,015 km
Sharpening machine
WeinigRondamat 931
WeinigRondamat 931
Listing

8,015 km
Profile grinder
WeinigRondamat 936
WeinigRondamat 936
Listing

8,015 km
Automatic
WeinigRondamat 912
WeinigRondamat 912
Listing

8,015 km
Double end trimmer saws
Weinig High-Mech 893 not Hydromat
Weinig High-Mech 893 not Hydromat
Your listing has been deleted successfully
An error has occurred