Used Inverter Interface for sale (6,032)

Condition: used, Year of construction: 2023, -Hydrostatic drive system -30 km/h travel speed Pjdpo Afl U Eefx Ai Tjgu -Differential lock -Gearbox housing -Load capacity: 1,600 kg -Air-suspended driver's seat -LED lighting, rear and front -Battery disconnect switch -7-pole socket for rear-mounted equipment -3rd control circuit with electric actuation -Radio -Slow-speed function + hand throttle -Front axle steering -Pressure relief for 3rd control circuit -Euro SWP hydraulic attachment interface MAS232540 Price applies to the current condition. Offer is subject to change. Errors, modifications, and prior sale are reserved. All information is without guarantee.

Condition: new, mileage: 315 km, power: 152 kW (206.66 HP), color: grey, gearing type: automatic, loading space length: 37,000 mm, loading space width: 20,700 mm, loading space height: 4,000 mm, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice from us, we kindly ask you to schedule an appointment. Mr. F. Huber will be happy to assist you. Cargo area length: 3400mm, cargo area width: 2070mm, cargo area height: 400mm, outline lights on the platform, platform with a clear width of 2.070 mm, front long material carrier with cab protection, seat heating for heated seats, luxury seat for driver with armrest and lumbar support, adjustable in height, inclination, and longitudinal direction, hydraulic, sprung, and heated, seat belts with warning signal for driver and passenger, standard seat belt color, seat belt tensioner on the passenger side, seat covers in fabric, 4-seater bench in the passenger compartment, ConnectivityBox 4G, telematics contract optional, front headlights halogen, daytime running light function, accident data recorder, light and rain sensor, high beam control manual, body manufacturer interface, tinted windows, rear parking sensors, standard Daily identification, wide wheel arch trim, Iveco logo chrome, fuel filler neck in B-pillar, vehicle badge standard, tire pressure monitoring system (TPMS), lateral vehicle designation, proactive lane keeping assist with lane departure warning (ELK), black radiator grille, advanced emergency braking system (AEBS) with City Brake, electrically adjustable and heated exterior mirrors, cab width 2000 mm, driver drowsiness detection system, central locking with remote control, speed limiter 160 km/h, traffic sign recognition with intelligent speed assistance (ISA), electric windows for front doors, left-hand drive for right-hand traffic, front airbags for driver and passenger with seat belt tensioners, first-aid kit, steering wheel with function buttons for radio, telephone, cruise control, and menu navigation, AdBlue tank 20 liters under the cab, trailer load 3.5 t, spare wheel, dimension corresponds to vehicle tires, underrun protection rear, ESP system, steel rims, reinforced parabolic spring rear axle, single-layer, fuel tank 86 l between frame rails, parking brake manual, center, transverse leaf spring front axle standard plastic, C-profile steel ladder frame, standard suspension, front axle, homologation goods transport for standard vehicles, data set standard, exhaust pipe center under vehicle, oil pan standard, Eco mode, radiator in aluminum, emission standard EURO VI E, crankcase ventilation heated, starting strategy standard, handbrake control for remote start, diesel particulate filter, settings for special fuels (HVO/GTL), heated fuel filter, automatic torque converter transmission HI-MATIC 8HP, comfort noise insulation, generator 3080 watts (14 Volt x 220 Ampere), additional speed limiter, trailer socket 12V 13-pin, mirrors for body width 2200 mm category IV, rear wall of cab with window, recommended for open bodies to observe rear traffic, rear view camera with dynamic guide lines, additional vehicle key, with remote control, trailer coupling ball head, My Iveco infotainment 10 inches with navigation, Alexa voice assistant integrated, bench seat for passenger with multi-function storage and storage compartment, fog lights, air conditioning with automatic climate control as well as, pollen filter and outside temperature display, adaptive cruise control (ACC), air conditioning compressor 170ccm, comfort headrests, comfort seat for driver with armrest and lumbar support, adjustable in height, inclination, and longitudinal direction, hydraulic, sprung. Pgsdpo Aftngofx Ai Tsu ...

Condition: ready for operation (used), Year of construction: 2023, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,000 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding machine manufactured in 2023. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Construction: Welded steel frame; Bending system: Wedge drive; Crowning: Included, adjustable via control • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Manipulation and positioning (integrated) • 2-axis part manipulator with 12 suction modules; X travel 2,653 mm; stroke 100 mm • 5-axis rear stop; Rotary manipulator; Front stop; Loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop: 3,000 mm/s • Part manipulator: 3,000 mm/s • Rotary manipulator: up to 3 rev/s • ToolMaster Bend: 2,400 mm/s • Positioning accuracy • Y: 0.10 mm; X: 0.05 mm; R: 0.05 mm • CNC control • 21.5" touchscreen; Windows 7 Ultimate 64-bit; keyboard and mouse • USB; RJ45; Ethernet 10/100 Mbit/s; Internet teleservice/remote diagnostics • Programming software • TecZone Fold floating license • Automatic programming from 2D/3D, automatic bending program generation • 3D bending simulation; collision checking; manual program modification • ToolMaster Bend (automatic tool handling) • Automatic hold-down tool positioning and setup per program • Automatic positioning of standard, Pick&Place, and curved holders • Included tooling • 16 standard hold-down tools (160 mm each) • 6 Pick&Place hold-down tools; segments 10/15/20/40 mm • Corner hold-down tool, length 199 mm • OBW90 and UBW90 bending tools • ENW equipment • ENW function for tilting hold-down tools • ENW110-40 tool, length 3,123 mm, depth 40 mm • Min bending width with ENW: 40 mm • Bend angle measurement • Optical bend-angle assistance with integrated camera • Graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety • CE certification; rotating safety doors; safety light barriers • Working-area access protection; foot switch with enable; emergency stop • Electrical power supply: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation and feeding; transfer to bending center • Automatic finished-part unloading with belt conveyor • Max blank size: 3,048 x 1,500 mm • Storage interface included Pgjdpfxj Afpmle Ai Teu • Loading trolley: not included • Rail set: not included • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules and 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Identification and connectivity accessories • Wireless 2D code reader with Bluetooth • Barcode and DataMatrix code reading • Automatic production program loading

Condition: excellent (used), Year of construction: 2006, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 28,000 rpm, rotational speed (max.): 28,000 rpm, Heidenhain 530 control system. 28,000 RPM spindle. HSK63 A tool interface. 80 bar coolant pressure. Chip conveyor. Blum tool measuring system. Renishaw probe. Pgsdpfxe Afzgpo Ai Tju Numerous accessories, holders, and vices, and much more. New spindle to be installed in summer 2024.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, laser type: diode laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 10 h, laser power: 24,000 W, warranty duration: 6 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, Standard Equipment Machine - Work area: 4000 x 2000 mm - Enclosed machine frame - Longitudinal conveyor belt - Motion unit for highly precise machining - Gantry drive in combination with linear direct drives - Cooling unit for machine and laser (water-air) - Work area lighting - Positioning laser diode - Spray device - Automatic nozzle cleaning - Integrated control cabinets - Integrated cabinet - Enclosed beam guidance via laser light cable (LLC) - Machine status indicator - Machine for ambient temperatures up to 45 °C - Transport and assembly device TRUMPF Laser - Excitation via pump diodes - Laser power control Cutting Head - Universal cutting head with fully adaptive lens system - Protective glass - Online condition monitoring of the protective glass - Dynamic Focus Control - Automatic nozzle centering Control System - Fast re-production - SINUMERIK control system - Ergonomic control panel with 21.5″ wide- screen multi-touch color display - Integrated technology data - Automatic shutdown - Programmable gas selection for pressure/cutting - Microweld - Remote support interface - Production plan - Multi-sheet processing - Condition Guide - Cutting Guide Functions - AdjustLine - BrightLine fiber - Smart Nozzle Automation - DetectLine - Drop&Cut - Integrated camera 1 for process monitoring - ControlLine - FlyLine - PierceLine - PlasmaLine - High-speed cutting package - High-speed cutting package Eco - Copper cutting package - Brass cutting package Data Transfer - USB interface - RJ-45 network interface - Online Update Manager Safety - CE marking and EC Machine Directive - Light barriers Pgjdpj Afxu Sefx Ai Teu - Multi-chamber extraction system - Electric roll-up roof - Machine enclosure with certified viewing window door on the right and left Extended Standard Equipment - Compact dust collector - Support strips made of structural steel - Automatic pallet changer in longitudinal direction (standard/heavy-duty) - Nanojoints - Smart Rerun Extended Machine Equipment Extended Laser Equipment - External solid-state laser TruDisk 24001 with BrightLine fiber - Separate laser power supply Additional Cutting Packages - High-speed cutting package Eco - Sheet thickness extension cutting package Extended Machine Equipment - Machine for ambient temperatures up to 45 °C - Prefilter for gases N2 + O2

Condition: used, mileage: 350,000 km, power: 155 kW (210.74 HP), first registration: 01/2020, fuel type: diesel, overall weight: 7,200 kg, color: yellow, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,930 mm, total width: 2,550 mm, total height: 2,950 mm, loading space length: 4,260 mm, loading space width: 2,400 mm, loading space height: 1,850 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, For sale is a well-maintained Iveco Daily 72-210 with a beverage transport body and the globally popular 3.0-liter diesel engine. The vehicle is in good condition! * German vehicle * Euro 6 standard * 1st owner * N1 truck registration Equipment: Beverage transport body * Flatbed + cover * HI-Matic automatic transmission * Air suspension * Automatic climate control * Trailer hitch * Rearview camera * Cruise control * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 7200 KG * Unladen weight: approx. 3500 KG * Payload: 3700 KG * Trailer load: 3300 KG Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair prices * Transfer license plates (5-day/customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally detailed and hygienically cleaned! The special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior * If necessary, paint correction and smart repair All our vehicles have also undergone thorough maintenance. Naturally, this includes new fluids, filters, and other expenses that you shouldn't have to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments, or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found at: Special equipment: Pgedpoz Ex Ewjfx Ai Teu Storage compartment on dashboard with USB connection, front axle load 2.7 t, trailer socket 13-pin, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, audio/telephone controls on the steering wheel, body manufacturer interface, vehicle key with remote control, speed limiter system programmable, cooling compressor 170 ccm, steering column (steering wheel) adjustable in height/length, smoker's package, switch for lighting in the cargo area, front mud flaps, Traction Plus (electronic traction control) with downhill assistance Additional equipment: Airbag driver side, trailer stabilization program (TSM), trailer socket preparation, drive slip control (ASR), design: C-series, exterior mirrors electrically adjustable and heated, exterior mirrors long, for vehicle width 2350 mm, electronic brake force distribution, driving assistance system: emergency brake assistant AEBS + City Brake, tachograph digital, front axle suspension: torsion bar spring, windshield and side windows tinted, generator 210 A, speed limiter system 90 km/h, grab handle A-pillar, urea tank (AdBlue): 20 liters, body/structure: flatbed standard, fuel tank: 90 liters, engine 3.0 liters - 154 kW diesel, wheelbase 4100 mm, spare wheel in driving condition, spare wheel holder between floor longitudinal members, low emissions according to emission standard Euro 6d, seats in the cab: passenger double seat, seats in the cab: driver's comfort seat (hydraulically), maintenance indicator, permissible total weight 7.00 t, twin tires on 2nd axle/rear axle

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, Submitting a bid obligates the bidder to collect the item by December 1, 2026. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Podpfo Aayn Nsx Ai Tegu Model: TruLaser 7040 (L62) Year of Manufacture: 2012 Operating Hours: need to be updated Working Area Working area X/Y/Z: 4,000 × 2,500 × 115 mm Speed: max. 304 m/min Accuracy: ±0.1 mm Laser Laser power: 2 × 4 kW Laser heads: 2 units Condition of laser heads: functional Cutting Capacities Sheet metal thickness steel: max. 20 mm Sheet metal thickness stainless steel: max. 15 mm Sheet metal thickness aluminum: max. 10 mm Control System Control system: Siemens Sinumerik 840 D SL Machine Dimensions and Weight Length: 15,800 mm Width: 7,280 mm Height: 3,090 mm Weight: 16,500 kg Environmental Conditions Ambient temperature: max. 43 °C EQUIPMENT Thin sheet metal productivity package for high-speed, standard, and compressed air cutting 2 lens cutting heads with 130 mm focal length Compressed air cutting BrightLine CoolLine with 2 separate lens cutting heads 4 clamping jaws, 2 per pallet Wide transverse conveyor belt “Wavebelt” with tilting container Tilting container to the left of the machine More powerful compact dust extractor Connection piece for the exhaust duct of the compact dust extractor MDE interface

Condition: good (used), Year of construction: 2016, operating hours: 17,000 h, functionality: fully functional, FOR SALE 5-Axis Machining Center – DMG MORI DMU 95 monoBLOCK® YEAR 2016 Description: Selling a DMG MORI vertical 5-axis simultaneous machining center (Deckel Maho Pfronten GmbH), year 2015. A versatile, highly rigid, and well-equipped professional machine. Suitable for complex and high-precision machining operations. Can be viewed powered on and in operation on site. Main Features: • Numerical Control: HEIDENHAIN TNC 640 (ERGOline® interface) • Spindle speed max: 20,000 rpm • Hour counters: Power on: 48,878 h | Actual machining: 17,030 h • Machine weight: ~14,000 kg (14 tons) Pedpfx As Af Aiaoi Tsgu Capabilities & Machining Envelope: • Travels: X = 950 mm | Y = 850 mm | Z = 650 mm • Max. workpiece dimensions: Ø 1,040 mm x Height 590 mm • Tilting rotary table: Ø 850 x 750 mm (Max. load 1,000 kg) • Tool magazine: 60 positions Equipment & Included Options: • HEIDENHAIN TS 649 infrared workpiece probe • BLUM laser tool measurement system • quickSET 3D geometric control kit • Remote electronic handwheel • Nozzle ring for coolant around the spindle • Safe operating mode: Mode 4 • Automatic chip conveyor & Original transformer • 3D STEP digital model of the machine included (for simulation/CAM) Conditions: • Removal, lifting, and transport are the sole responsibility of the buyer. PRICE €173,000

Year of construction: 2026, condition: new, KEY Technology Optyx – Optical Sorting Machine Brand: KEY Technology Model: Optyx Year of manufacture: June 2026 Type: Optical sorting machine Electrical connection: 400 V Motor: 400 V / 4.85 A Frequency: 50/60 Hz Sales Description For sale: a NEW KEY Technology Optyx optical sorting machine, manufactured in June 2026. The Optyx is designed for the optical inspection and sorting of products within the food industry. Using optical detection technology, the system can monitor products and remove any items that deviate from specifications or contain unwanted components from the product stream. The machine is constructed from stainless steel and equipped with protective guards and safety features. Its industrial-grade design makes it suitable for integration into professional production lines. The KEY Technology Optyx is ideal for applications where product quality, food safety, and consistent sorting are essential. IQF Spiral Freezer – 3,600 kg/hour Complete industrial IQF spiral freezing line for the food industry A complete industrial IQF spiral freezing system, designed for the continuous freezing of various pre-cooked cheese and vegetable products. The system has a capacity of approximately 3,600 kg per hour and cools products down to a core/exit temperature of approximately -18 °C, depending on the product and process conditions. The spiral freezer features a hygienic design, a stainless steel conveyor belt, and an efficient air circulation system to ensure uniform heat transfer and product freezing. Key features and specifications * Type: SF-375/100-35 spiral freezer * Capacity: approximately 3,600 kg/hour * Suitable products: mozzarella and other cheese products, hash browns, spinach bites, nacho cheese nuggets, and chili cheese nuggets * Residence time: approximately 45 minutes * Product infeed temperature: maximum approx. +70 °C, depending on the product * Product outfeed temperature: approximately -18 °C * Conveyor belt width: 1,000 mm (effective) * Total conveyor belt length: approximately 700 meters * Number of spiral tiers: 35 * Cooling system: ammonia (NH₃), pumped system * Cooling capacity: approx. 600 kW absorbed power, with approx. 900 kW installed capacity * Defrost system: sequential hot-gas defrosting Pjdpfxj Af Nmgj Ai Togu * Drive system: direct drive principle * Construction: fully welded and insulated enclosure * Control system: Siemens PLC with a 22-inch touchscreen * Frequency drives: Danfoss * Electrical components: Schneider Electric Configuration and included systems The installation is equipped with a complete CIP (Clean-in-Place) system, including a belt washer, spray bars, and rotating nozzles for cleaning the spiral and the interior space. The system features a foam/pump unit and connections for two different cleaning agents, with automatic switching. Furthermore, the installation includes a comprehensive control system, comprising an electrical cabinet, cabling, safety sensors, emergency stop mechanisms, and communication interfaces for integration into the production line. Application This spiral freezing system is suitable for industrial producers of frozen snacks, cheese products, and vegetable products who require high processing capacity and an integrated solution for freezing and cleaning. Note: The final capacity and freezing time depend on the product, product dimensions, infeed temperature, and the desired discharge temperature.

Year of construction: 2023, condition: used, New demonstration machine! List price €1,999 net. Maximum, robust equipment and the best quality at an attractive price. Fully automatic on/off operation. Equipped with all safety devices. Completely ready for connection. High-quality electric motor with high starting torque is equipped with a motor protection switch. Starting capacitor and starting relief valve ensure easy starting. Standard equipped with a phase inverter for easy manual reversal of the direction of rotation. Compressed air generation via a high-performance HOS unit. The starting relief valve ensures easy and pressure-free starting. The two-cylinder high-performance unit made of cast iron and the low speed guarantee particularly smooth and low-vibration operation and a long service life. This ensures an even longer service life due to even less wear. High-quality compressor with optimal lubrication for a long service life and high reliability. Equipped with a high-quality intake filter. The aftercooler with large cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air, which protects the pneumatic tools. Additionally equipped with an intercooler to the aftercooler. Corrosion-free valve plates for improved heat dissipation and durability of the compressor. The large fan wheel and a cooling air deflector on the cylinder ensure optimal cooling of the compressor. A stable metal belt guard provides optimal protection of the components and high user safety. Compressed air supply to the tank via a flexible armored hose with heat protection prevents vibrational breakage. Powerful and efficient drive. The toothed drive belt facilitates starting, improves smooth running and power transmission, and reduces power consumption by up to 30%. Stable metal belt guard. Operation at the service unit. Equipped with a high-quality CONDOR pressure switch MDR 5 with a robust push-button function for fully automatic on/off operation. Filter pressure regulator for stepless adjustment of the working pressure, while simultaneously separating dirt, oil and condensate. Two large manometers indicate the tank and working pressure. Air outlet at the service unit via a comfortable safety quick coupling. Only fixed screw connections at the service unit, no hose connections. Two compressed air outlets. One compressed air outlet for filtered compressed air. One compressed air outlet via a direct outlet on the tank with a ball valve. Comfortable safety coupling - the advantages. Comfortable safety couplings from AIRCRAFT, the first manufacturer to use them as standard. Two separate locking systems for maximum work safety. Prevents dangerous whipping of the hose line. Comfortable and safe to transport and set up. Ergonomically extended handle for comfortable transport in an almost upright position - lifting stress on the back is avoided. Puncture-proof PU foam wheels and a stable steering chassis with parking brake enable easy transport. The parking brake prevents both rotational and rolling movement of the wheels and ensures an optimal position of the compressor. With a practical second transport handle on the tank, which makes it easier to carry the compressor. Technical data: Intake capacity approx. 850 l/min. Filling capacity approx. 680 l/min. Maximum pressure 10 bar. Tank capacity 100 l. Number of compression stages 2. Compressor speed 1240 min-1. Sound power level Lw 95 dB. Pede Agch Eopfx Ai Tegu

Condition: ready for operation (used), Year of construction: 2004, screw diameter: 125 mm, Single screw extruder manufactured in 2004. This EUROTECNO E12535D features a screw diameter of 125 mm and an L/D ratio of 35:1, with an output capacity of approximately 350 – 550 kg/h. It includes a high-efficiency heating system with 6 to 8 independent zones and a double vacuum degassing system. If you are looking to get high-quality extrusion capabilities, consider the EUROTECNO E12535D machine we have for sale. Contact us for further details. • Screw type: Single screw • L/D ratio: 35:1 (35D) • Number of screws/mechanical shafts: 1 • Output capacity: Approx. 350–550 kg/h (material dependent) • Main motor: AC electric with inverter drive (VFD), 110–160 kW (standard for Ø125 mm) • Screw speed: Electronically adjustable, approx. 0–120 RPM • Transmission: Heavy-duty, oil-cooled gearbox • Barrel heating zones: 6–8 independent zones • Heater type: High-efficiency ceramic band heaters • Barrel cooling: Forced-air cooling fans per zone • Degassing/venting: Double vacuum degassing system with liquid ring pump Additional equipment • Feeding system: Force feeder / crammer hopper for film flakes and shredded regrind • Screen changer: Continuous hydraulic dual-plate screen changer Psds Af U Dnopfx Ai Tsgu • Pelletizing: Hot die-face water-ring pelletizer • Cooling & dewatering: Horizontal centrifugal dryer and vibrating classifier screen • Conveying & storage: Pneumatic blower to cyclone and bagging silo

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 2,935 mm, total width: 5,500 mm, table width: 1,100 mm, table length: 560 mm, table load: 800 kg, overall weight: 5,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 4,800 mm, number of axes: 3, This 3-axis DMG Mori Seiki CMX 800 V was manufactured in 2017. It features a travel range of 800 mm in the X-axis, 560 mm in the Y-axis, and 510 mm in the Z-axis. The machine includes a robust table size of 1,100 x 560 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki CMX 800 V vertical machining centre. Contact us for further details. Podpfxj Agb E Ro Ai Tegu - CNC Control: HEIDENHAIN TNC 620 (SLIMline Control Panel / MC 7420D PC & Screen + TE 715D Keyboard)- Table Clamping Surface: 1,100 x 560 mm- Max Table Load (Center): 800 kg- Table Loading Height (Floor to top edge): 850 mm- T-Slots: 4 / 18H12 (Distance between slots: 100 mm; 1 reference slot: 18H7)- Spindle Speed Range: 20 – 12,000 rpm- Spindle Drive Power (40% ED / 100% ED): 13 kW / 9 kW- Spindle Torque (40% ED / 100% ED): 82 Nm / 54 Nm- Tool Taper / Interface: SK40 (DIN 69871 / DIN 69872 Form A/B pull stud)- Tool Clamping Force: 10 kN (SK40 / BT40)- Tool Magazine Capacity: 30 pockets (chain type)- Max Tool Diameter (with adjacent tools): 80 mm- Max Tool Diameter (with free adjacent pockets): 125 mm- Max Tool Length (from spindle nose): 300 mm- Max Tool Weight (Automatic tool change): 8 kg- Max Total Magazine Load: 240 kg- Feed Drives: AC Servomotors on X, Y, and Z axes- Rapid Traverse Rate (X / Y / Z): 30 / 30 / 30 m/min- Feed Speed Range (X, Y, Z): up to 20,000 mm/min- Position Measurement Resolution: 1 µm- Positioning Uncertainty P (VDI/DGQ 3441): 6 µm- Chip Management: Integrated scraper conveyor (bande grattante, 220 L coolant tank, 20 L/min pump at 5 bar)- External Coolant & Air Supply: External adjustable coolant nozzles and blow air (M25)- Internal Cleaning: Work area rinsing / flushing gun (pistolet de rinçage)- Manual Axis Movement: Electronic handwheel (HR 510FS)- Access / Safety Authorization: DMG MORI SMARTkey electronic mode selector- Apparent Power: 32 kVA- Rated Supply Voltage: 400 V AC ±10% (3/N/PE)- Mains Frequency: 50/60 Hz- Control Voltage: 230 V AC / 24 V DC- Full Load Current (In max): 52 A- Main Fuse: 63 A- Short Circuit Breaking Capacity (Ics): 0.63 kA- Basic Machine Weight: approx. 5,400 kg- Chip Conveyor Weight: 500 kg Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2024, For sale: a used Claas Axion 870. Year of manufacture: 2024 Registration number: 178376 Options: -CLAAS front linkage 5.8 t -External control for front linkage and front control unit -Without 3-point cast weight -Front PTO 1,000 rpm (mounted) -Electronic linkage control for front linkage -CEBIS control terminal with touch function -CMATIC incl. 2 speed memories + CSM, CEBIS -Generator 250 A -ISOBUS preparation incl. ISO socket rear -Task Control Basic enabled, tractor side -AUTO PILOT / GPS PILOT Ready -SAT 900 GNSS receiver - RTK NET enabled -CLAAS communication module (LTE) -CEMIS 1200 terminal -CLAAS Remote Service incl. five-year license -ISOBUS activation for CEBIS -GPS PILOT enabled - SAT 900 GNSS receiver -ELECTROPILOT with reversing function -Video function CEBIS enabled + CPC InCab connection for 2 cameras -Steering interface prepared -Steering interface enabled -Electronic lifting system (EHR) with radar sensor and slip control -Lower link rear linkage, pick-up hitch Cat. 3 -Lower link stabilizers, automatic -Hydraulic upper link long, pick-up hitch Cat. 3 -Trailer hitch with insert for drawbar -Drawbar with ball hitch incl. K50 -Tow hitch, automatic, with 38 mm bolt diameter -Ball hitch set Cat. 3/2 -Air brake system (2-circuit) incl. air dryer -Monopedal -Hydraulic system Load-Sensing, variable pump 205 l/min, 200 bar -5 control units, electro-hydraulically proportional -Front linkage and 1x DW front, connected at the rear -Power Beyond, Load-Sensing connections without flat-face couplers -CMATIC - Continuously variable transmission -Transmission ratio 50 km/h -Front axle PROACTIV, braked -Rear axle, standard -PTO 540 ECO + 1,000/1,000 ECO rpm -PTO stub 1 3/8" 6-piece and 1 3/4" 6-piece -Parking brake on REVERSHIFT lever -Front fender, pivoting, 620 mm -Standard flange -Standard transmission management -295 hp max. power, 284 hp homologated rated power, ECE R120 -Large diesel pre-filter -Battery main switch, electronic -Diesel, white -Exhaust shield, standard -Air compressor -Engine brake -Cabin with 4-point suspension -Roof with sunroof, opening to the rear -Rear window -Rear window wiper -Electric mirror incl. wide-angle mirror -Fender extensions rear fender, outer width 2.75 m -Terminal rail in the headliner -Toolbox -Removable storage box left -Additional interface sockets -2 LED driver lamps on the A-pillar -Overwidth rear lights LED with warning signs -4 driving lights LED, 2 work lights LED on the hood -Color CLAAS green -CEBIS -Comfort seat fabric, semi-active longitudinal/lateral suspension -Passenger seat with seat belt -Automatic climate control incl. preparation Cat. 3 Psdpfe Af Hzaox Ai Togu -MP3 radio with Bluetooth, USB, SD, external microphone and hands-free system -Cigarette lighter -Leather steering wheel -Dynamic steering for GPS Ready, AUTO PILOT -50 km/h sticker -Safety stickers, standard -Right-hand traffic -2 rotating beacons LED -Equipment European Union -License plate holder front -2 wheel chocks -First-aid kit Additional accessories: Ball head K80 Tow hitch Hydraulic upper link rear hydraulics Mechanical upper link front hydraulics Additional display Offer subject to change. The price applies to the current condition of the machine. For further information, please contact your Zürn sales consultant.

Condition: used, mileage: 1 km, power: 132 kW (179.47 HP), first registration: 09/2026, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 4,035 mm, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,363 mm, loading space volume: 15 m³, loading space length: 4,070 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, Equipment: ABS, air conditioning, cruise control, navigation system, onboard computer, 37% = €21,192 - Price advantage. List price ex works incl. VAT: €56,942. All our FIAT vans can be retrofitted with a trailer hitch for an extra charge! THE LARGEST FIAT VAN SHOWROOM IN HESSE. We will deliver your FIAT free of charge to your doorstep! Nationwide! Nationwide registration with desired license plate for €169. Over 100 vans in stock and immediately available! German vehicle, no re-import = 100% reliability. New car warranty extension up to 96 months or 200,000 km available for an extra charge! Buy cheaply online at: - Cargo space (mm): L 4070/W 1870/H 1932 - Payload: 1,270 kg - Permissible braked trailer load: 3000 kg Equipment highlights: Techno EU package: 10-inch audio-navigation system with touchscreen, DAB, Apple CarPlay & Android Auto, automatic climate control, double USB charging port on the dashboard. Cargo L4 package: 12V socket in the cargo area, rear wing doors with a 270° opening angle, LED lighting for the cargo area with 2 LED modules. Worksite package: Traction+, all-season tires with snowflake symbol, 16-inch, full-size spare wheel, spare wheel holder. Rear view camera, rain and light sensor, speed limiter and cruise control, rear parking sensors, electrically adjustable and heated exterior mirrors, driver fatigue detection including driver monitoring camera, emergency brake assist (pedestrian and cyclist detection), lane keeping assist, traffic sign recognition, intelligent speed assist, event data recorder (EDR) / black box, driver airbag, front passenger airbag for double front seat. Assistance systems: Emergency brake assist, traffic sign recognition, rear parking aid, rear view camera, rear warning system, driver fatigue detection/attention assist, speed limiter, cruise control, hill-start assist, light sensor, rain sensor, lane keeping assist. Media & infotainment: Navigation / Online navigation, 10.2-inch color display, touchscreen display, radio, MP3-compatible audio system, DAB tuner, iPod®/iPhone®/Android interface, USB interface/connection, Android Auto / preparation. Safety & technology: Trailer stability control. Comfort & climate: On-board computer, power steering. Tires & rims: All-season tires. Interior & design: Controls on the steering wheel. Environment & charging: Environmental badge 4. Transmission: Automatic. More information: Service booklet. TOP financing & leasing conditions, also possible without a down payment. We will calculate your desired rate directly on the phone - term and final payment as desired. Immediate credit decision! Trade-in of used vehicles including settlement of existing loans. Reservation not possible due to promotional prices. DEKRA workshop test award (4 times in a row). Call us now or visit us today, 20 km north of Frankfurt/Main, directly on the A5. We look forward to seeing you and will be happy to convince you personally with a relaxed cup of coffee. We look forward to seeing you and will be happy to convince you personally. Pgsdpszu Tfgjfx Ai Tju

Condition: excellent (used), Year of construction: 2016, ARBURG A 370 H 600-170 Integralpicker V (S&P 3801) Manufacture year: 2016 Operating hours: 45,447 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 60 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 650 mm Dimensions: 4000 x 1700 x 2300 mm Eeight: 3700 kg Connected load: 5,5 / 26 kW incl. Integralpicker V, EM67, Interface color, Airvalve, Corepuller, electric Convejorbelt, Sorter Unit, price when new machine 104.200,- Euro + picker 10.500,- Euro Price: on request contact: Mr. Ralf Schulz Pgjdpfx Aie Af Rt Ej Tju

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 610 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 610 CNC was manufactured in 2024. It features a longitudinal travel of 610 mm, transverse travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with a 20-station tool changer and a maximum table load of 300 kg. If you are looking to get high-quality milling capabilities, consider the KUNZMANN WF 610 CNC vertical machining centre we have for sale. Contact us for further details. Pedpj Af Nzuefx Ai Tjgu - Demonstration machine- Spindle Hours: 332 h- Program Run Hours: 310 h- Feed Rate (Rapid Traverse): X/Y/Z up to max. 30/30/15 m/min - Main Drive (Option Installed): SK 40 Motor Spindle, 1 - 12,000 rpm (Swiss made) - Spindle Power: 8.5 kW (S1-100% ED) / 11.5 kW (S6-40% ED) - Spindle Torque: 43 Nm (S1-100% ED at 1,880 rpm) / 58 Nm (S6-40% ED at 1,880 rpm) - Tool Interface: SK 40 DIN ISO 7388-1 Form AD (formerly DIN 69871 AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872) - Tool Clamping: Mechanical, clamping force 10,000 N, hydraulic release - Vertical Milling Head: Direct-driven, manually tiltable -5/+90°, extendable quill with turnstile (stroke 70 mm, clampable) - Rigid Angle Table Surface: 800 x 425 mm - Table T-Slots: 6 x 14 H7 (pitch 63 mm) - Max. Table Load: 300 kg - Tool Changer: 20-station disc magazine, SK 40 - Max. Tool Diameter: 75 mm (full magazine) / 150 mm (with adjacent empty pots) - Max. Tool Length: 250 mm - Max. Tool Weight: 8 kg - Tool Change Time: approx. 3 s (chip-to-chip approx. 15 s) - Positioning Accuracy (ISO 230-2): 0.008 mm (direct linear measuring systems) - Repeatability (ISO 230-2): 0.006 mm (direct linear measuring systems) - Measuring System: HEIDENHAIN absolute direct linear measuring system (resolution 0.001 mm) - Coolant Through Spindle (IKZ): 50 bar high-pressure pump (26 l/min), 4-stage pressure adjustment (15/25/40/50 bar), 25 µm double switch filter - Internal Air Cooling: Through-spindle air cooling, M-function programmable - External Air Cooling: Flexible articulated hose, M-function programmable - Paper Band Filter Unit: Trommel-mulden filter with 600 l external tank, type VDF150/50/50 (150 g/m²) filter fleece (dimensions: 1800 x 860 x 1620 mm) - Chip Conveyor: Hinge-belt conveyor integrated into 115 l coolant tank, 60° incline, lateral discharge left (height 870 / 1060 / 1200 mm) - Workpiece Probe: HEIDENHAIN TS 460 3D probe (infrared) with SE 661 transceiver - Additional Axes Preparation: 4th axis preparation (axis controller in electrical cabinet, pre-wired interface) - Automation Interface: Preparation kit for EDUCATION4.0 Cobot cell (Harting connector I/O interface, pneumatic connection, plus 2x pneumatic table connections max. 6 bar) - Enclosure Door: Automatic sliding front door driven by belt drive (manual push button & programmable) - Software Option: OCM (Optimized Contour Milling) for advanced trochoidal milling - Handwheel: HEIDENHAIN HR 510 FS electronic handwheel with axis selection and emergency stop - Operating Voltage: 400 V, 50 Hz - Power Consumption: approx. 21 kVA - Control Voltage: 24 V - Compressed Air Supply: 6.5 - 10 bar (min. 6.5 bar required at machine) - Machine Weight: approx. 2,900 kg (with tool changer)

Condition: used, Year of construction: 2022, - 165 hp max. power, 156 hp rated power - Transmission without creep speed - 24/24-speed Hexashift, Hexactiv, rev limiter - PTO 540/540 ECO rpm - Transmission ratio for 40 km/h - 4-post cabin with 4-point suspension - Roof, without sunroof - Comfort seat, fabric, air-suspended, swivel - Air conditioning, incl. preparation for Cat. 3 - CIS+ with color display - Electronic lift control (EHR), standard Pgjdps Af R Ewofx Ai Tju - Drawbar, automatic with 38 mm pin diameter - Without mounting bracket for front loader - Armrest with Electropilot (drivestick), 4 function buttons - HEXACTIV automatic shifting system - Power Beyond (LS connections without flat face couplers) - Engine side panels - 3 control valves, electro-hydraulically proportional - Lower link side stabilizers, automatic - Additional sockets - Halogen work lights Additional equipment: - 540/65 R30 Mitas AC65 / Solid rim - 650/65 R42 Mitas AC65 / Solid rim - MP3 radio with Bluetooth, USB, SD, external microphone and hands-free system - Steering wheel, leather - Dynamic steering for GPS Ready, Auto Pilot - Steering angle sensor for Proactiv front axle - Rear lights, standard, halogen with warning signs - Fender extensions, 2.55 m outside width, wheel diameter 1.93 m - Terminal rail, side window right - 2 driver's auxiliary headlights, A-pillar - Front PTO 1000 rpm - External control for front lift - CLAAS front lift 3.0 t incl. vibration damping - 2 front connection sockets / 1 pressureless return - Proactiv front axle - Load-Sensing hydraulic system 150 l/min - SMART STOP + cruise control management - Front fender, swivel, 540 mm - ISOBUS preparation, rear - Activation of Task Control Basic, tractor-side - GPS Pilot Ready - Tow hitch with tow ball for standard trailer hitch - Steering interface prepared - Activation of steering interface - 3 + 2 control valves, electro-hydraulically proportional

Condition: used, Year of construction: 2021, CLAAS Lexion 6800 TT, HP channel engine NEW! (Int. No.: 15223) Year of manufacture: 2021 1892 operating hours, 1280 drum hours, 881 effective hours, Lighting: LED, folding attachments machine-side, Header with 2-way system XL, automatic drawbar coupling, Dust extraction for E/V/HP channel, Upper linkage hydraulic for HP channel, header brake, APS threshing system for grains, HP channel hydraulic, AutoContour belt new, closed threshing drum, threshing drum drive 2-stage 170-460, 330-930 rpm, threshing drum grate, Center rider for shakers installed, JET STREAM cleaning system incl. 3D, Grain meter incl. overflow volume measurement with CEBIS display, Upper and lower sieve TM6, Grain tank 12500 liters, Grain tank spout XL Q330 mm, grain tank unloading 130 l/s, Radial distributor Special CUT, Swath former - radial distributor, straw chopper drive for radial distributor Premium, A/C Matic automatic climate control with heating, 25 km/h, Mercedes Benz OM 462 PS, fuel consumption measurement Fuel tank 950 liters, Engine drive pump, A/C Matic automatic climate control with heating, Radio with MP3 function, Cooling unit with dust box L, Roll-up blinds for side windows, CEBIS terminal with standard armrest, camera system prepared, Camera rear display in the terminal, camera drawbar coupling Profi Cam display, camera grain tank spout Profi CAM display, camera display Profi Cam, terminal preparation, S10 terminal Satcor 15, Yield meter, Printer, CLAAS Remote Service (for extension), telematics license (for extension), Automatic documentation license (for extension), comfort seat air-suspended, LED work lights, Steering interface prepared, GPS Pilot Ready grain tank 12500, 13500, 15000 liters, Claas navigation computer, RTK activation (extension, surcharge), dust box L incl. operator's seat, CEMOS Automatic Auto CROP Flow, CEMOS Automatic Auto Slope, CMOTION multi-function handle, Automodule, Additional module 1, Additional module 2, Tilt sensor, CLAAS communication module, Locking system standard, LED rear lights, CAN Ethernet Gateway (CEG), central lubrication system Terra Trac incl. connection straw chopper, discharge direction adjustment automatic, straw chopper - counter blade - friction plate adjustment manual, steering valve proportional XL for GPS Pilot, Laser Pilot, Auto Pilot, Auto Pilot module, Rearview mirror electrically adjustable, chain lubrication for grain tank unloading automatic, hose reel with air compressor hose and compressed air gun, hand washing basin, Rotating beacon, three pieces, license plate light, Near-field mirror, Pgjdpj Af Rygefx Ai Tsu Belt NEW Engine NEW - damage due to heat exchange of the exhaust gas recirculation (EUR 75,000.00) TT tracks 735 mm Camso, Tires 620-70 R26 Header V930 9.3 m and 2-axle trolley Vehicle documents France, Germany and other countries possible. Option: Surcharge for all-wheel drive EUR 25,000.00 plus VAT. Belts 630 NEW, surcharge EUR 4,000.00 plus VAT. 30 km/h EUR 1,900.00 plus VAT. Header 930 V 2-axle trolley EUR 9,900.00 plus VAT. Header 770V, surcharge EUR 4,900.00 plus VAT. Financing possible from 2% for used and new machines. This is only an advertisement for informational purposes. The purchase contract can be concluded with us according to our general terms and conditions. We will gladly take care of financing options in Germany and abroad. There is the possibility of trade-in of other machines.

Condition: new, pressure 320 t chamfer lenght 3100 mm distance between columns 2600 mm work stroke 310 mm dayligth 525 mm column arm 510 mm ram stroke speed 140 mm/sec work speed 8.0 mm/sec return speed 130 mm/sec table height 900 mm oil volume 290 ltr. voltage 400 Volt weight 16500 kg range L-W-H 4550 x 2450 x 3200 mm ----- CNC "C" SERIES electro-hydraulic press brake featuring: * Increased daylight (open height) * Extended cylinder stroke * Increased throat depth * Long-type "full machine cover" ----- Equipment: - DELEM CNC control, model "DA-69T," with touchscreen/graphics * 2D and 3D graphical programming via touchscreen * Three-dimensional visualization, including a representation of the machine . during simulation and production * 24-inch high-resolution TFT color display * Compatibility with the Delem "Modusys" system for flexible expansion and . customization of control modules * USB port and interfaces for external peripheral devices * Support for custom, application-specific software . * Control system with multitasking environment * Interface for sensor-supported bending and automatic corrections * Profile-S3D offline programming software * Swiveling touchscreen control unit, positioned at the front left - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, plus CNC-controlled crowning - CNC-controlled, motorized backgauge * Travel range: X-axis 750 mm // R-axis 250 mm * Travel speed: X-axis 500-600 mm/s // R-axis 200 mm/s * Equipped with recirculating ball screws * CNC-controlled, motorized backgauge fingers (Z1 + Z2) - Sectionalized "gooseneck" (swan-neck) upper tool: ROLLERI 135.85.R08, "System A" * Includes quick-change clamping system * Includes integrated crowning system within the tool holder - Sectionalized 4-V universal die (60x60 mm) - Rear safety system: light curtain - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser safety system at the front of the machine (including FMSC) Pgjdpfs Afzvfox Ai Tou - 2x front support arms with a sliding system (HIWIN linear bearings) - 1x mobile dual-pedal foot control - CE marking / Declaration of Conformity - Operating manual, including electrical and hydraulic schematics * Image shows a machine of nearly identical design

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 2,000 kg, overall weight: 24,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 60, Completely overhauled by DMG in 2011. Podpj Agaznofx Ai Tsgu Tool interface SK50 with tool storage for 60 tools. Max. spindle speed: 8,000 rpm. 30 kW spindle with swiveling milling head (B-axis). Infrared measuring probe. NC rotary table with pallet changer.

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Psdpfxow Dcb Ss Ai Tsgu

Condition: used, Year of construction: 2023, incl. MC Flex Flex | 5 years, 800 hours/year (4000 hours) / Service contract 150 EUR End date: 09/24/2028 600/70 R30 Trelleborg 650/85 R38 Trelleborg CLAAS front linkage 5.8 t External control for front linkage and front control unit Front PTO 1,000 rpm (mounted) CEBIS operator terminal with touch function CMATIC incl. 2 speed memory + CSM, CEBIS Generator 250 Amp/hour ISOBUS preparation incl. ISO socket rear Task Control Basic activated, tractor side AUTO PILOT / GPS PILOT Ready CLAAS communication module (LTE) ISOBUS activation for CEBIS ELECTROPILOT with reversing function Activation of video function CEBIS + CPC InCab connection for 2 cameras Steering interface prepared Steering interface activation Electronic lift control, EHR with radar sensor + slip control Lower links rear linkage, pick-up hitch Cat. 3 Lower link stabilizers, automatic Hydraulic top link long, pick-up hitch Cat. 3 Trailer hitch with insert for drawbar Drawbar with ball hitch incl. K50 Tow hitch, automatic with 38 mm bolt diameter Ball set Cat. 3/2 Air brake system (2-circuit), incl. air dryer Monopedal Hydraulic system Load-Sensing, variable pump 205 l/min, 200 bar 5 control units, electrohydraulic proportional Front linkage + 1x dw/front connected at the rear Power Beyond, Load-Sensing connections without flat-face couplings CMATIC - Continuously variable transmission Transmission ratio 50 km/h Front axle PROACTIV braked Rear axle, standard PTO 540/540 ECO + 1000 rpm PTO stub 1 3/8" 6- and 1 3/4" 6-spline Parking brake on REVERSHIFT lever Front mudguards, pivoting, 620 mm 295 hp max. power, 284 hp homologated rated power, ECE R 120 Large diesel pre-filter Battery main switch, electronic Air compressor Engine brake Podpfx As Aga Ecsi Tsgu Cab with 4-point suspension Roof, with sunroof, opening to the rear Rear window for 4-post cab, tinted Rear window wiper, incl. side wiper on the right Electric mirror, incl. wide-angle mirror Fender extensions rear mudguards, overall width 2.75 m Terminal rail, headliner Toolbox Dust box removable, left Additional interface sockets 2 LED driving lights, A-pillar Overwidth rear lights, LED with warning signs 4x driving lights LED, 2x work lights LED on the hood Work lights LED – Premium Work lighting LED – Premium Color, CLAAS Green CEBIS Comfort seat, fabric, semi-active longitudinal/lateral suspension Passenger seat with seatbelt Automatic climate control, incl. preparation Cat. 3 MP3 radio with Bluetooth, USB, SD, external microphone and hands-free system Cigarette lighter Steering wheel, leather Dynamic steering with GPS Ready, AUTO PILOT 50 km/h sticker 2 revolving hazard lights LED LED Premium package Driver Premium package

Condition: used, Year of construction: 2022, 600/70 R34 Trelleborg TM900 710/75 R42 Trelleborg TM900 CLAAS front three-point hitch, 6.5 t - HD External controls for front three-point hitch and front control unit Electronic load management CEBIS operator terminal with touch function CMATIC incl. 2 speed memory settings + CSM, CEBIS ISOBUS preparation incl. ISO socket, rear AUTO PILOT / GPS PILOT ready ELECTROPILOT with reversing function Steering interface prepared Steering interface activation Electronic lift control, standard EHR lower link Rear three-point hitch, pick-up hitch, Cat. 3 Lower link stabilizers, hydraulic Hydraulic top link, pick-up hitch, Cat. 3 Air brake system (2-circuit), incl. air dryer Hydraulic system, load-sensing, variable pump 220 l/min, 200 bar 5 control valves, electro-hydraulic, proportional Front three-point hitch + 1x double-acting valve/front, connected at the rear Power Beyond, load-sensing connections without flat-face couplings Transmission ratio 40 km/h Front axle PROACTIV, braked Flange axle PTO 540 ECO + 1000 rpm PTO stub 1 3/8" 6-spline and 1 3/4" 6-spline Front fender, pivoting, 620 mm 355 hp max. power, 360 hp homologated rated power, ECE R 120 Large diesel pre-filter Battery main switch, electronic Air compressor with air dryer Cab with 4-point suspension Roof with sunroof, opens to the rear Rear window for 4-post cab, tinted Electric mirrors, incl. wide-angle mirror Pgedpfx As Agba Usi Teu Fender extensions to 2.75 m outside width 2 terminal rails, headliner and side window Driver's working lights, A-pillar Overwidth rear lights, LED with warning signs 4x driving lights LED, 2x work lights LED on hood Color, CLAAS green CEBIS comfort seat, fabric, semi-active lateral suspension Passenger seat with safety belt Automatic climate control, incl. preparation for Cat. 3 MP3 radio with Bluetooth, USB, SD, external microphone and hands-free system

Condition: used, mileage: 473 km, power: 129 kW (175.39 HP), first registration: 01/2026, fuel type: diesel, empty load weight: 2,474 kg, maximum load weight: 1,026 kg, overall weight: 3,500 kg, tire size: 225/65 R16, axle configuration: 4x2, wheelbase: 4,100 mm, next inspection (TÜV): 01/2027, fuel consumption (urban): 728 l/100km, color: white, driver cabin: other, gearing type: automatic, suspension: steel, number of seats: 6, total length: 7,283 mm, loading space volume: 10 m³, loading space length: 3,150 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, lifting height: 2,700 mm, Equipment: ABS, air conditioning, cruise control, onboard computer, traction control, trailer coupling, CERTIFIED PRE-OWNED Plus, Color: White IC 194, Current tires: M+S tires, Unladen weight: 2474 kg, Permissible total weight: 3500 kg, Cargo area (L W H): 3,150 mm x 1,800 mm x 1,900 mm, Tire size: 225/65 R16, Cargo area volume: 10 m³, 1st axle: , 2nd axle: , Seats: Fabric, Interior color: Gray, Leaf spring suspension, 2 x Airbags, Trailer hitch ball: Trailer load 3500 kg, Electronic Stability Program ESP, Anti-Slip Regulation ASR, Automatic climate control, Adaptive Cruise Control ACC, Comfort driver's seat, Driver's seat with hydraulic damping, Driver's seat with height adjustment, Driver's armrest, Heated driver's seat, Co-driver's bench seat for 2 persons, Automatic headlight control, Headlight range adjustment, Radio, Digital radio reception DAB, Multi-function display, USB connection, Bluetooth audio streaming, Hands-free system with Bluetooth, Lane keeping assist, Rear parking assist, Rear view camera, Driver fatigue detection, Rain sensor, Multi-function leather steering wheel, Power steering, Adjustable steering column, Electric windows 2-way, Outside temperature display, Electrically adjustable and heated exterior mirrors, Wide-angle mirrors, Tire pressure control, Immobilizer, Central locking with remote control, Tinted glass, Partition wall closed, Cargo area floor: Wood, Cargo area wall lining: High-grade plastic, Rear doors with 270° opening angle, Sliding door on the right, Hill-start assist, Daytime running lights, Connector plug 1x13-pole, Cup holder, Light sensor, Attention assist, Digital instrument cluster, Apple CarPlay and Android Auto (wireless), Speed limiter: 160 km/h, Driving profile selection: ECO and Power mode, Traffic sign recognition, Emergency brake assist, 6 seats, 8-speed automatic transmission (ZF), Windows in the second row of seats, Vehicle was converted to a 6-seater, Truck registration, VDI interface for telematics systems, Trailer socket 12V 13-pole, Storage compartment under co-driver's bench seat, 2 rows of tie-down rails in the cargo area, Payload: 1026 kg, VEHICLE LOCATION, 90441 NUREMBERG, DIESELSTR. 65, Your contact person, Mr. Bächer, Tel. Pgodpe Agc D Dsfx Ai Tsu

Condition: used, mileage: 287,400 km, power: 390 kW (530.25 HP), first registration: 12/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, * 12-speed automatic transmission * Air-sprung front axle * Front axle capacity 8.0 t * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Secondary oil retarder * Wheelbase 3,700 mm * Driver's air-suspended comfort seat * Lower comfort bunk * Upper comfort bunk * Lower mattress, PremiumComfort * Shaving mirror Pedpfj Agdbpsx Ai Togu * Electric single-piece sunblind * LED ambient lighting, driving and living area * Stand-alone air conditioning, electric * Automatic climate control * Waste heat recovery system * Auxiliary hot water heater, cab * Electric tilting/sliding sunroof, glass version * Lowered driver's seat box, 40 mm * Interface, Fleet Management System FMS * Trailer socket 24 V, 15-pole * Illuminated Mercedes star * BigSpace cab, 2.50 m wide * Comfort cab suspension, air-sprung * Air deflector, lockable, with end edge flaps * External sun visor, transparent * Air horns, cab roof * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * PowerShift Advanced * Driver's seat heating * Tires 295/55 R 22.5, rear axle * Tires 315/60 R 22.5, front/leading/driven axles * Air suspension, rear axle Lowliner * Navigation system * Fuel tank 290 liters * Fuel tank 650 liters + 85 liters AdBlue * Automatic high beam/low beam and cornering light * LED headlights * LED turn signals in light signature * 1 LED work light, lower, center * Headlight cleaning system * Engine OM471, R6, 12.8 l, 390 kW (530 hp), 2600 Nm * Engine version Euro 6, E * 3rd generation engine OM471 * High Performance Engine Brake * TruckLive * Safety Pack * Sight Package, with LED headlights * Actros F Plus * Chrome package, interior * Media package * Economy package * Driving package * Comfort package * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Keeping Assist * Attention Assist * Traffic Sign Recognition * Active Brake Assist 5 * Active Sideguard Assist * Tire pressure monitoring * Airbag, driver * Cruise control * Actros model generation 5 * MB ATS warranty according to general terms and conditions from first registration, 3 years/450,000 km * Refrigerator in drawer under bed * EBS * Without spare wheel ----For sale to business customers only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We will be happy to provide you with a leasing or financing offer.