Used Italdibipack + Printer Flowpackmaschine Mit Und Ohne Drucker F for sale (42,826)

Year of construction: 1970, condition: ready for operation (used), Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible. Bodpfxszqu Hqe Amzelk

Condition: used, maximum load weight: 29,539 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2021, total width: 2,354 mm, Year of construction: 2021, Equipment: ABS, Schmitz Cargobull SKI 24 SL 7.2 steel round tipper body, 28.2 m3 !!! FOR RENT!!! * German vehicle * Steel round tipper body, 28.2 m3 Blsdpsv H S Iuefx Amzsk * Hinged rear tailgate * SCB axles * Lifting odometer * Foldable underrun protection * Roll cover * Lift axle * Air suspension * Air control system * Disc brakes * Loading pressure gauge * Automatic lowering during tipping * ISO air connections with red and yellow coupling heads * 2 x 7-pin electrical connector * 15-pin electrical connector * ABS connection * Platform on the front wall Subject to prior sale and errors! We look forward to your call.

Condition: used, maximum load weight: 29,625 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2017, next inspection (TÜV): 03/2027, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 26 m³, total width: 2,550 mm, total height: 3,035 mm, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typos, and prior sale: Schmitz, approximately 26 cubic meter steel tipper/dump body, semi-circular (Vehicle 370) First registration: 09.10.2017 Type: SKI 24 7.2/ SGF-S3 Permissible gross vehicle weight: 36,000 kg Unladen weight: 6,375 kg Payload: 29,625 kg Technical inspection (TÜV): 03/2027, main inspection (SP): 09/2026 Overall length: 8,785 mm, internal length: 7,480 mm Overall width: 2,550 mm, internal width: 2,354 mm Overall height: 3,035 mm, internal height: 1,460 mm Roll-over tarpaulin, platform, access ladder on the driver's side Hinged flap with rubber seal 2 x 12-ton, 2-speed geared winch Shovel and broom holder on the driver's side 2 x wheel chocks Air suspension with lifting and lowering function 1st lift axle Schmitz fifth wheel coupling Tires: 1) approximately 40/60%, 2) approximately 90/40%, 3) approximately 80/90% Half-shell mudguards 2 x LED reversing lights Folding warning sign (A-sign) Fold-up underrun protection 2nd and 3rd axles: new air springs Bodpfx Ajzir Tfsmzolk Price: €15,500.00 (net) All information provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust local court; for disputes exceeding this value, it is the Schwerin regional court. Subject to errors, typos, and prior sale.

Condition: used, maximum load weight: 29,539 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2026, Equipment: ABS, Schmitz Cargobull SKI SCB?S3D SL 8.2 Steel Round Body 31.9 m³ * Rear tailgate (overlapping) * Air suspension * Pneumatic controls * Disc brakes * Lifting axle on the 1st axle * Automatic lowering during tipping * Load pressure gauge * Hubodometer * Sliding tarp * Foldable underrun protection * LED lighting system * LED auxiliary headlights * SCB axles * 15-pin ABS connection * 15-pin power connection * 2 x 7-pin power connections * ISO air couplings with red and yellow coupling heads Blsdpfoy Nhdvox Amzek Interim sale and errors expressly reserved! Sale exclusively in accordance with our General Terms and Conditions. Important notice – Important information: Despite careful inspection of all details in our offer, errors may occur. Some may be caused by transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal entitlement. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it is information for initiating a contract. The details provided are without guarantee and therefore do not constitute warranted characteristics.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: PM150, Function: The autoclave basket is inserted into the machine by the operator and then locked. The autoclave cages are loaded or unloaded layer by layer via a scissor lift system. The modular design allows the combination of manual, semi-automatic and fully automatic systems. Operation is via two-hand control. Loading and unloading systems can be combined with the following components: -Feed belt and turntable -Clock tape magnetic plate -Transfer plate Features: All machines are adapted to the respective requirements. Bljdot Ix T Aspfx Amzsk Feel free to contact us.

Year of construction: 2024, condition: new, functionality: fully functional, Pneumatically operated can opener including rack for different sizes Technical description: Bsdpottvxwofx Amzslk The can is handled by placing it under the punching head. By manually actuating the safety two-hand control, the lid is punched out with the knife in the punching head. After releasing the two-hand control, the punching head moves upwards to the home position.

Year of construction: 2024, condition: new, functionality: fully functional, Technical description: The system is designed for weighing standard cars. The loading trolley (200 or 300 litres) is pushed into the system. The free stroke and the weighing process are triggered by a button. The free stroke is carried out via motor drive. In connection with the bending rod weighing cell and the weighing terminal, the weight can be read in the display and passed on to the existing DMS or ERP system. If necessary, the recipe scale can be equipped with casters as a mobile version. The system can be equipped with all common weighing terminals. • Stainless steel base frame in hygienic design Bjdsttv Dfjpfx Amzolk • 1 drive unit • Button • Shafts, bearings • Height-adjustable feet (alternatively mobile version) • CEE plug

Year of construction: 2025, condition: new, functionality: fully functional, Efficient and gentle removal of excess liquid instead of long draining times: The pressure dewatering unit has been specially designed to efficiently remove excess liquid from preserved vegetables as well as pickled or thawed vegetables. The machine is easy to operate and can be handled by a single person. The product to be dewatered, such as canned mushrooms, pickled or thawed vegetables, is placed into the perforated crate. Once the system is started, a plate is lowered onto the product. The product is gently dewatered by applying uniform pressure over this plate. Efficient dewatering and minimal space requirement! The processing of pickled, thawed, or preserved vegetables is simplified and accelerated, as prolonged draining times are eliminated by efficient dewatering through gentle pressing. Due to its compact design, the machine requires minimal space and can therefore be easily integrated into various areas of production. Adjustable working pressure: approx. 6 bar Bodpfx Aexc T Nusmzjlk Dimensions (LxWxH): 700x650x1200 mm Weight: approx. 150 kg

Condition: good (used), Permanent circular magnet with star-pole arrangement Technical data: Diameter: 350 mm Central through-hole diameter: 40 mm Features: Flange with Camlock fitting, size 6, diameter: 315 mm Bljdpfx Amszrgy Sszjk Condition: good, technically inspected

Condition: refurbished (used), Year of construction: 2020, efi Vutek Pro32R + LED Roll Printer 12 Ricoh Gen 5 printheads, 7pl UltraDrop technology Bledpfxszqgn Ho Amzok Color: 4C + White (for overprinting and underprinting) Year of manufacture: 2020, installed Fully refurbished, with all printheads replaced with new ones Speed: up to 256 m²/h Printer has been completely cleaned: carriage completely overhauled, new printheads and tubes Filters and Matan firmware updated, etc.

Condition: new, Cantilever rack, new H: 400cm, base +3 storage levels with roof & rear panel Free delivery within Germany, except islands Data : - H : approx. 400 cm - D : approx. 147 cm - L : approx. 1420 cm - Cantilever arms : approx. 125 cm - Axial dimension: 290 cm (can be adapted to customer requirements) - New goods - made in Germany. - Delivery time approx. 6 weeks after commercial clarification. - 1000 kg load per arm - 4000 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 200 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 06 x uprights, incl. base approx. 400 cm made of IPE270. - 18 x cantilever arms approx. 125 cm made of IPE 120. - 06 x roof girder approx. 150 cm made of IPE 120, 5° rising roof pitch. - incl. roof and rear wall material. - incl. all necessary connecting elements and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 12.250,00 € net Bljdszpvnyepfx Amzjk plus statutory value added tax. You will receive an invoice with VAT shown. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your operating equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, Year of construction: 2007, REF: MM6439 Wick und Schaefer GmbH flow-meter rotary filler set up for 500ml PET sports cap filler with bottle cap Infeed/sorter and bottle cap tightener. Manufacturer - Wick und Schaefer GmbH. Model - MIN.FM.Servo. Date of manufacture - 2007. 2-stage filling - stage 1 is main fill and stage 2 is final top up fill. With attachment for CIP. Previously used for vitamin enhanced flavoured water. Overall dimensions - 3600mm long x 2130mm wide x 2300mm high. Bedpfxeza Eyuj Amzelk

Condition: new, functionality: fully functional, Grundfos TPE 50-430/2 S-A-F-A-BQQE-LD1 Single Stage Close Coupled In Line Centrifugal Pump. Specifications: Bodpfx Aotp A Shomzolk DN50 flanges 345mm between flanges Q = 35.1m3/h H = 33.9m n= 2920 /min Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2007, Hangcha forklift CPCD 80-RW14, 8 ton lifting capacity, with side shifter and automatic fork adjustment. Very good condition, technically perfect, from second owner. Original operating hours only 1170, year of manufacture 2007. 6-cylinder Isuzu engine, dry and flawless. Engine starts immediately, even at minus 10 degrees Celsius. New service, new rear tires. Lifting height 4m, overall height 3.2m, fork length 1.8m; including fork extensions to 2.8m. Lighting, indicators, etc. With cabin, air conditioning, heating – everything works. Own weight 11,490 kg. Blodpfxjyk Hwvo Amzsk

Condition: used, Year of construction: 1980, functionality: fully functional, We are offering this used universal drilling and milling machine, ALF 80, manufactured in 1980. Drilling machine SORALUCE ALG80, including technical documentation. Heidenhain ND70 control system. Tilting table for drilling machine, complete with tooling for the drilling machine. Blodpfx Amezl Rqhezek Manufacturer: Universal Drilling and Milling Machine Type: ALF 80 Year of manufacture: 1980 Machine no.: 55/5-110 Date: 10.11.1980 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Grundfos CRN3-19 A-P-G-V-HUBV pump with motor, unused but with signs of storage, 100% functional, scope of delivery as shown in the photos. Bljdjzkxhfjpfx Amzsk

Condition: good (used), 2550 x 880 mm (6 pieces) 2550 x 1090 mm (3 pieces) 1300 x 100 mm driven + 2 pieces without drive (2 pieces) 1300 x 200 mm driven + 1 piece without drive (1 piece) Roller diameter: 60 mm Bjdpfx Amexcufkozslk

Condition: good (used), PERMANENT CIRCULAR MAGNET with radial pole pitch Bedpszi A U Tsfx Amzolk Technical data: Diameter: 500 mm Height: 80 mm Features: Flange D: 370 mm, ISO50, M24 for KELLENBERGER cylindrical grinding machine Condition: good

Condition: good (used), Hydraulic pump, oil pump, gear pump -Recording wave: Price: per piece Quantity: 2 available -Dimensions: 170/120/110 mm Bledpfx Amjb A Siyozok -Weight: 4.3 kg

Condition: good (used), Hydraulic pump, oil pump, gear pump Blsdpfxeb A Sizs Amzsk -Recording wave: -Dimensions: 180/160/120 mm -Weight: 4.5 kg

Condition: used, Chimney, exhaust pipe, chimney stainless steel pipe Bodpsd N Ddtefx Amzolk -Chimney system: O 250 mm, not insulated -Quantity: 2 pieces of 1 m each -Price: complete -Dimensions: 250/250 / H1000 mm -Weight: 7 kg

Year of construction: 1999, condition: used, The system is not just a simple recycling extruder; it is a complete plastic recycling line consisting of: * Heysohn PAR 108 agglomerator/compactor (1993) * Heysohn extruder with degassing * Material feed and metering * Discharge/conveying system * Documentation available * Multi-zone heating (at least 9 heating zones visible) Blodpfx Aozhl R Ismzok * Vacuum degassing * 60 kW main drive * RAVIS 2 modular control system * Machine is evidently still fully assembled The control panel shows the following handwritten notes: * Extruder type: presumably PAR 108 * Diameter: 130 mm * Extruder output: approx. 345 kg/h * Motor power: 135 HP The system appears to have been used for processing film and plastic regrind into granules. Battenfeld BFX2-130-25V plastic extruder – year of manufacture 1999 For sale is a plastic extruder from Battenfeld Extrusionstechnik GmbH, type BFX2-130-25V, year of manufacture 1999. The system consists of an extruder, material feed with hopper, drive unit, and conveying system. The machine comes from an industrial plant and is in assembled condition. Manufacturer: Battenfeld Extrusionstechnik GmbH Type: BFX2-130-25V Year of manufacture: 1999 Operating voltage: 400 V / 50 Hz Weight: approx. 9,500 kg

Condition: used, Manufacturer: Grundfos -type: LP 80 125/124 B-F-A-RUUV -model: 48/62941-P1-0250 -volume flow: 50m3/h Bodpfx Amey R Edcszjlk -lifting height: 15.5m -operating pressure: 16 bar -operating temperature: 80°c -stem size: DN80

Condition: ready for operation (used), Grundfos SPK8-5/3 A-W-A-AUUV exchange pump D3HNH0403P31126 SN: MK116551 with MG71B2-14FT85-C pump motor No. 85805103,used, good condition, 100% functional, scope of delivery according to photos Bsdpfx Amjmq H R Sszslk

Condition: new, Grundfos CM5-5-A-R-I-V-AQQV F-A-A-N horizontal suction pump, unused, 100% functional, scope of delivery as per photos Blsdouqr Hbspfx Amzok