Used Kaeser Asd 32 for sale (8,325)

Condition: excellent (used), Year of construction: 2000, Siemens control unit Bar passage 32 mm 2 x 12-position turrets with driven tools Main / counter spindle Y-axis turret top Parts lifting device Blsdpfswh U Edex Ahmon Chip conveyor IRCO bar loading magazine

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Blodpfxewcgr Ee Ahmen Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 16,191 h, load capacity: 13,600 kg, lifting height: 5,300 mm, free lift: 2,650 mm, fuel type: diesel, mast type: duplex, construction height: 4,100 mm, fork carriage width: 2,450 mm, fork length: 1,200 mm, empty load weight: 18,300 kg, total length: 4,800 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 70 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 12.00-20 Blsdexxdy Aopfx Ahmjn Rear tire type: Superelastic Rear tire size: 12.00-20 Description: In addition to this Svetruck model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease purchase and financing at favorable terms are always possible for us. We are also happy to buy your used forklifts outright, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this 13.6 60-32 model. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sale. Side shifter, fork positioner, Fork positioner opening range: 630 / 2,280 mm Heater, full cab, full free lift,

Condition: used, Year of construction: 1992, Kaeser BS61 Screw Compressor Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped. Discharge pressure: 10,00 bar Motor power: 37.00 kW Free air delivery: 5,25 m³/min Bledpfxsypklbo Ahmjn

Condition: excellent (used), Year of construction: 2008, KAESER SXC6 screw compressor – machine with air receiver and air dryer, post-service Blodpfx Aeymzhnjhmon

Condition: good (used), Year of construction: 1991, Kaeser CS120 Screw Compressor Fully automatic, fully piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-damped. Discharge pressure: 8.50 bar Bjdpfxjwnn Tuo Ahmeln Motor power: 75.00 kW Free air delivery: 11.34 m³/min

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 32 [mm] - maxi feed length : 178 [mm] - maxi turning length : 63.5 [mm] - number of spindles : 8 Blodpfeyh Rm Hex Ahmsn - number of cross slides : 8 - electromagnetic clutch - number of spindle speeds : 26 - spindle speed : 199-2737 [rpm] - independent feeds normal strokes : 73 [mm] - dimensions : 6632 x 1357 [mm] - weight : 7950 [kg] EQUIPMENT - Saco hydraulic pick up station 7 - Stock reel and stand - Magnetic swarf conveyor - Fume extractor - Part catcher - End of bar catcher - Part conveyor belt - High pressure pump - Part off toolholder station 7 - Drill holder station 8 - Bracket toolholder for center bloc station 1 - Bracket toilholder and drill holder station 1 - CNC cross slide RTECH position 5 : 2 axis with CNC FANUC Oi-TD command - Barloader IEMCA PRA40/42F

Condition: good (used), Year of construction: 1999, MANUFACTURER: KAESER MODEL: DS241 SERIAL NO.: 1001 YEAR: 1999 POWER (kW): 132 OUTPUT (m3/min): 17.5 PRESSURE (bar): 8.5 OPERATING HOURS (DOC/TOTAL): 21029 / 31989 FREQUENCY INVERTER: no Bljdpfx Ajxyat Ushmon BUILT-IN DRYER: no HEAT EXCHANGER: no COOLING (AIR/WATER): air ON RECEIVER TANK: no DOCUMENTS: no CONNECTION: 2 NEW/USED: USED

Condition: used, TECHNICAL DETAILS Quenching tank for stirring oil quenching - power : 0.25 [kW] - voltage : 3 x 380 [V] Bsdpfeug U Thex Ahmsln

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 280 - 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,01 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Z stroke : 150 [mm] - Spindle speeds : 280 - 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,01 [°] - Number of turrets : 1 UPPER TURRET - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 5.700 [rpm] - Live tools power : 2,8 [kW] GUIDE BUSH HOLDER 1 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 6.000 [rpm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 8 [kVA] WEIGHT & DIMENSIONS Bsdpfjuha Elox Ahmoln - Machine floor space : 2.645 x 1.403 [mm] - Machine height : 1.680 [mm] - Machine weight : 3.880 [kg] EQUIPMENT - CNC : Fanuc 16 iTB - 3 colors status lamp - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : IEMCA BOSS 432/32LL - Electric transformer

Year of construction: 2002, condition: excellent (used), KAESER DSD241 SCREW COMPRESSOR, 132 kW!! Bodpfx Ahoickr Temsln KAESER DSD241 screw compressor; the screw element was replaced in 2011!! Technical data: capacity: 25.00 m3/min (25000/min); engine power: 132 kW; pressure: 8 bar operating hours: 18581 h The compressor is in perfect working order. We provide service and maintenance. KAESER DSD241 SCREW COMPRESSOR, 132 kW!! Effective capacity: 25 l/min

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Bljdpfxou Nm Nio Ahmon Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 32 mm arm length 1000 mm workpiece height max. 1400 mm total power requirement 6 kW Bedpfx Ahet H Smysmeln weight of the machine ca. 3.700 kg dimensions of the machine ca. m

Condition: excellent (used), MORI-SAY 6/32 rebuilt in standard configuration with : - 4 composite slides at stations 1-2-4-5 with independent movement - SIEMENS model S5 Simodrive motors for feed speed conditions Chip conveyor : Removable tank with chip conveyor Blodpfxjmhfxme Ahmjn Pick-up : Synchro pick-up Pick-up brake Hydraulic slide for rear machining Other accessories and special accessories on request

Condition: used, Brand and Model: ERLO TC-32 Type : COLUMN DRILL Table: 550x550 mm Drill capacity: 32 mm Distance from spindle to column: 360 mm Max height from table to spindle: 780 mm Drilling depth: 200 mm Tiltable rotating table: Yes Clutch of spindle feed: Yes Bodpfezq R Uqjx Ahmjln Speeds: from 93 up to 1420 Drilling Feeds: 0,10-0,18-0,24

Condition: excellent (used), functionality: fully functional, pressing force: 3 t, Force 32 kN, stroke 100 mm Bedpezxmhpefx Ahmoln

Condition: not inspected (used), functionality: unexamined, Year of construction: 2008, controller model: HMI PLC KAESER, pressure (max.): 8.5 bar, rotational speed (max.): 2,965 rpm, TECHNICAL DETAILS Engine speed: 2,965 rpm Bedpsyq Hi Ejfx Ahmoln Maximum operating pressure: 8.5 bar Air dryer Model: ABT 102 Max. operating pressure: 21 bar MACHINE DETAILS Control model: HMI PLC KAESER Motor power: 55 kW Voltage: 400/460 V The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7549

Condition: used, functionality: unexamined, Ferwood Code: RU0000293 - Manufacturer Code: 2-083-01-5105 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Bljdpfxowtfzae Ahmon

Condition: excellent (used), ROSSI & CATELLI OLIMPIC TC XX/ASD Aseptic Multitubular Sterilizer – Stainless Steel ROSSI & CATELLI OLIMPIC TC XX/ASD aseptic multitubular sterilizer, designed for the continuous thermal treatment of liquid, semi-liquid, and viscous food products in aseptic processing lines. The system uses tubular/multitubular heat exchange technology to heat and subsequently cool the product indirectly and in a controlled manner. It is designed for processes where sterilization conditions must be achieved before proceeding to storage or aseptic filling. Its extensive configuration of stainless steel tubular sections provides a large heat exchange surface area and allows the different phases of the process to be integrated into a single unit. MAIN FEATURES -Manufacturer: ROSSI & CATELLI -Series: OLIMPIC -Model: TC XX/ASD -Type: Aseptic multitubular sterilizer -Tubular/multitubular heat exchange technology -Continuous thermal treatment -Indirect product heating -Heating and cooling sections -Thermal holding tubes -Stainless steel construction -Multiple heat exchange modules -Sanitary connections -Self-supporting industrial structure -Designed for aseptic processes -Integrable into complete aseptic processing and filling lines PROCESS The ROSSI & CATELLI OLIMPIC TC XX/ASD is designed to continuously perform the different stages necessary for the thermal treatment of the product. The product circulates through the multitubular system, where it can pass through different phases of preheating, heating, sterilization, thermal holding, and cooling, depending on the configuration and parameters established for each process. Indirect exchange allows for controlled product temperature while keeping it separate from the heat transfer fluid. Bledpfx Ajzw E D Tshmjn It can be integrated with: -Product preparation tanks -Sanitary pumps -Homogenizers -Deaerators -CIP systems -Aseptic tanks -Aseptic fillers -Complete UHT/aseptic processing lines APPLICATIONS Especially suitable for the juice, processed fruits and vegetables, tomato, sauces, purees, concentrates, and other liquid or viscous food products that require continuous thermal treatment. Depending on its configuration, it can be used for fruit juices, purees, and pulps, concentrates, tomato products, sauces, and other pumpable products intended for aseptic processing. The combination of ROSSI & CATELLI technology, the OLIMPIC system, and multitubular configuration provides an industrial solution for continuous sterilization and aseptic production processes. Machine available for inspection. Additional technical information, dimensions, photographs, or videos can be provided upon request.

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Machine data: 365 kg; 2800 RPM, 22 kW Bledozl E N Eepfx Ahmjn Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: ready for operation (used), Schmalenberger ZHT02 32-08/2 (50Hz) SN: 2018005883/20 with ATB CNF 90L/2D-11S+E3 / 1710 motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Blodpfx Ahszpcwujmen

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals. Bledpfxezump Es Ahmen

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,800 kg, Spindle: MK4 Bsdpfx Ahszuarmsmoln Clamping area: 1200 x 500 Clamping slots: Number 3, width 18, spacing 125 Maximum drilling capacity: for St 60 steel: 32 mm at 0.2 mm/rev for GG 20 cast iron: 45 mm at 0.2 mm/rev

Condition: new, Max. capacity steel tube (mm) 32x2 Max. capacity stainless steel tube (mm) 25x1.5 Max. capacity steel profile (mm) 30x30x1.5 Min. Tube (mm) 8 Max. Radius (CLR) 225 Min. Radius (CLR) 20 Control system PLC Max. bending angle (°) 190 Blsdpfxjzuklke Ahmon Screen 10” PC Windows touch screen

Condition: used, each with 32 stations with divider plate suitable for 64 blocks : - dimensions 1 full block per station -> ± 1070 mm x 530 mm Blodpfx Ahozxrkvjmen - dimensions 2 blocks per station -> ± 535 mm x 530 mm max. thickness blocks 100 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.710 x 1.600 x 1.120 mm 32 blocks weighing ± 26 kg or 64 blocks weighing ± 13 kg ± 1.664 kg / Cycle (2h30)