Used Kaiser Other for sale (21,286)

Year of construction: 2021, condition: used, Load capacity: 2000kg, support surface per table X/Y: 1400mm/900mm, tilting angle: 100°, travel of the movable table: approx. 300mm, drive: hydraulic, control: PLC, operating modes: manual/automatic, collision avoidance in manual operation via table position and table inclination. Equipment: heavy-duty rollers, therefore movable. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1300mm, weight: 1310kg. Documentation available. Inspection possible by arrangement. Itjdpszu Sztjfx Aipok

Year of construction: 1985, condition: used, Drilling process: single-lip gundrilling, operating method: rotating tool, number of working spindles: 1, nominal drilling depth: approx. 750mm, drilling range for solid drilling in steel: approx. 30mm, drilling range for counterboring in steel: approx. 40mm, spindle drive: 11kW, max. spindle speed range I: 1800rpm, max. spindle speed range II: 5700rpm, max. feed rate range I: 320mm/min, max. feed rate range II: 160mm/min, rapid traverse: 3.5m/min, clamping table X/Y: 420mm/1280mm, cross-slide table manually operated, max. transverse travel: 400mm, table clamping surface X/Y: 600mm/600mm, high-pressure coolant system for deep-hole drilling oil with 1000l coolant tank, flow rate: approx. 2-94l/min, max. pressure at max. flow rate: 45bar, pump power: 11kW, separate control cabinet. The machine underwent an extensive partial overhaul in 2018, during which the machine was disassembled and cleaned, all guideways and support surfaces were ground and partially scraped, motors were inspected and fitted with new bearings, the drilling spindle was fitted with new bearings, the ball screw incl. nut was replaced, the pump motor was overhauled, the wiper set was replaced, and the machine was repainted and all functions were checked and rectified. Including extensive accessories. Documentation available. Inspection possible by arrangement. Itsdpfx Aijzu Szyjpek

Condition: good (used), Year of construction: 1991, Total power: 22 kW Operating voltage: 380 V AC Operating current: 46 A Frequency: 50 Hz Pneumatic pressure: 4 bar Itedpfxszvflhe Aipjk Water pressure: min. 3.5 bar Transport and loading can be organised throughout Europe at extra cost upon request. Prices excl. VAT Inspection by appointment is possible. Please contact us, our team will be happy to assist you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Do you need a high-quality but affordable machine for your production? Or do you want to sell yours? For further information or contact options, you can reach us via the contact form.

Condition: used, machine/vehicle number: 1379A, mileage: 1,638 km, power: 179 kW (243.37 HP), first registration: 11/1986, fuel type: diesel, overall weight: 15,322 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, parking heater, trailer coupling, TUV is made NEW!!! So-KFZ registration , The AM General in a really good condition directly from the Army , Well maintained and maintained, the body is in a super good condition (vehicle from the reserve) , The M944A1 is equipped with: All-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), air brakes with ABS, 3 front seats, the body has the dimensions: L/W/H 5550 / 2200 / 2200.e L/W/H 5550 / 2220 / 1910mm inside, equipment of the body: lathe, tool cabinet with drawers, grinding stand, welding unit, permanently installed power generator 110 Volt 31KVA driven by vehicle engine (Cummins with 105 operating hours) via auxiliary drive, 2-piston compressor with compressed air tank, air connections in the body, trolley, loader, impact wrench large and small, grinding witch, air connections in the body, trolley, loading device, impact wrench large and small, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch. and small, grinding witch, magnetic drill, vice, large auxiliary heating and ventilation, many sockets, interior lighting, both sides and the rear of the body can be opened, the km are miles, driving license class 2 (truck), tire size 14.00R20 (very good condition) tubeless, top speed 90 km / h, displacement 14011cm? , , 24Volt power supply , The M944A1 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timer AM Generalist also already for conversion as a motorhome and long-distance traveler, . All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Itodpfx Aeqx Sxaeipjk

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: S2108121, overall weight: 2,200 kg, For sale: FEROMOTO FS2020 industrial milling machine, manufactured in 2021. This machine is designed for industrial milling and processing of raw materials. It has a robust and durable construction, suitable for operation in a production facility. The milling machine is intended for processing herbs and fiber hemp. Technical specifications: Ijdpfx Aozuw A Ajipstk Manufacturer: FEROMOTO Model: FS2020 Year of manufacture: 2021 Serial number: S2108121 Weight: approx. 2200 kg Maximum power: 5.5 kW Certification: CE Used machine. Condition as shown in the photos. The machine can be inspected on site. Price in Poland: net (+23% VAT)

Condition: used, functionality: fully functional, Year of construction: 2005, color: red, overall weight: 16,000 kg, maximum load weight: 13,000 kg, empty load weight: 3,000 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,460 mm, machine/vehicle number: 04851, BDF Steel Swap Body / Swap Container 7.45 m with Roller Shutter * Swap container / steel box with profiled external walls * Craneable and stackable * Aluminum roller shutter – fully refurbished * Keyhole rails * Laminated plywood floor, suitable for forklift traffic * Forklift pockets and upper corner fittings * Support legs not height-adjustable * Parking height: 1.32 m * Internal loading height at roller shutter: 2.20 m Itsdpfx Ajwtqt Ioipsk * Technically in very good condition Rental from just 1 day, long-term rental possible! We always have larger quantities from various manufacturers and in different versions available for sale or rental! Delivery possible throughout Germany!

Condition: new, Year of construction: 2007, Storage location number: 100577028 Transport dimensions (L x W x H): 0 x 0 x 0 Itjdpezp T Taefx Aipsk ---- Location: Passau Dimensions: 3,750 x 1,450 x 2,180 mm (L x W x H) Weight: 3,644 kg Engine: Volvo TAD740GE Fuel: Diesel Power output: 250 kVA

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Industrial spinning extruder from an Oerlikon Barmag production installation, suitable for polymer processing and nonwoven applications. 2 extruders are available for sale at the moment. The machine was manufactured in 2020 and has seen very little use. Machine details: Manufacturer: Oerlikon Barmag / BBE Engineering Type: 9E10/30D-HT Project: P13000 Year of manufacture: 2020 Application: spinning / polymer extrusion / nonwoven production Polymer configuration: PP Single-screw extruder Industrial heavy-duty design The original Barmag documentation identifies the unit as a “Spinning Extruder” and covers its operation as part of the complete production plant. The equipment includes the extruder with drive system, feeding/dosing equipment, electrical/control equipment and associated components as shown in the photographs. Components from well-known industrial manufacturers including Siemens, Flender, Nordson and Oerlikon Barmag are installed. The machine is currently still installed, which allows the buyer to inspect the equipment in its existing installation. Condition: Used, very low operating use Year: 2020 Availability: Immediately / by arrangement Location: Germany Extensive original technical documentation is available for the machine, including operating and maintenance documentation, drawings and information concerning the drive, gearbox, heating, cooling and electrical systems. The documentation also includes drawings and technical information concerning the extruder and its associated equipment. The complete PDF documentation with detailed technical specifications can be provided to interested buyers upon request. Isdpszulh Tjfx Aipotk Additional photographs and information are available upon request. Worldwide inquiries are welcome.

Condition: new, Excavator class: 14.0 - 20.0 ton Weight: 1357 kg Beat rate: 350 - 650 bpm Itjdpfx Ajlqakroipsk Working pressure: 150 - 170 kg/cm Oil volume flow: 90 - 120 l/min Chisel diameter: 125 mm All models are supplied with a chisel, hose set and tool box.

Year of construction: 2000, operating hours: 3,060 h, condition: used, Transmission: Automatic Itsdpfx Aiezt I T Njpok Power: 22 kW (30 HP) Empty weight: 1.200 kg Please contact Emal Jaweed for more information

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 32/5, Rotary screen S = 1.5 P = 0.55 kW Itodpfx Aoztxw Seipek N = 9 rpm Weight: 450 kg Dimensions: 630 x 1500

Condition: like new (used), functionality: fully functional, BANDO 20-metric-ton traveling crane and a second 7.5-metric-ton hoist, consisting of two box-type main beams made of 1/2-inch steel plate, each measuring approximately 18.90 m long x 0.60 m wide x 1.25 m high. It includes a mezzanine approximately 17.45 m long x 0.70 m wide, as well as a handrail with dimensions matching those of the crane and an approximate height of 0.90 m. It contains 2 BANDO control panels; Includes 2 trolley-type beam trolleys made of IPR beams, approximately 4.45 m long x 0.48 m wide x 0.35 m high, each with a 2 HP gearmotor and travel wheels approximately 51” in diameter; Includes a BANDO single-rail electric hoist, Model BA20, Series N/A, Year N/A, with a load capacity of 20,000 kg (20 metric tons) and a 15 HP motor, three-phase, 220 V, 60 Hz, with a lifting height of 12 m; Includes a BANDO single-rail electric hoist, Model BN7.5, Series N/A, Year N/A, with a load capacity of 7,500 kg (7.5 metric tons) and a 7.5 HP motor, three-phase, 380 V, 60 Hz (does not include a hook and hoisting cable)(Lot 2) / Grúa viajera Marca BANDO de 20 toneladas y un segundo polipasto de 7.5 toneladas / 7.5 toneladas, compuesta por 2 vigas principales tipo cajón fabricadas en placa de acero de 1/2”, con dimensiones aproximadas de 18.90 m de largo x 0.60 m de ancho x 1.25 m de alto cada una.Incluye mezanine de aproximadamente 17.45 m de largo x 0.70 m de ancho, así como barandal (pasamanos) con medidas equivalentes a la grúa y altura aproximada de 0.90 m, Contiene 2 tableros de control marca BANDO;Incluye 2 carro de viga tipo Trolley fabricados con vigas IPR, de aproximadamente 4.45 m de largo x 0.48 m de ancho x 0.35 m de alto con motorreductor de 2 HP y ruedas de desplazamiento de 51” aprox cada uno; Incluye polipasto eléctrico monorriel marca BANDO, Modelo BA20, Serie N/A, Año N/A, con capacidad de carga de 20,000 kg (20 toneladas) y motor de 15 HP, Trifasico, 220 V, 60 Hz, Izage de 12 m.; Incluye polipasto eléctrico monorriel marca BANDO, Modelo BN7.5, Serie N/A, Año N/A, con capacidad de carga de 7,500 kg (7.5 toneladas) y motor de 7.5 HP, Trifasico, 380 V, 60 Hz (No contiene gancho y cable de Izage) Itjdpfozmn I Hjx Aipsk

Condition: used, mileage: 493,082 km, first registration: 03/2005, overall weight: 14,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, loading space width: 2,300 mm, loading space length: 2,760 mm, loading space height: 400 mm, Equipment: air conditioning, all wheel drive, crane, soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to availability until sale, errors, typos, and prior sale: Unimog U500 3-way tipper + crane K 9501 (Vehicle 405) Mileage: 16,082 km Operating hours: 13,983 6 cylinders 2 rotating beacons, 2 signal horns, 2 long-range spotlights + 2 work lights on the roof Municipal hydraulics with 3 sections on the left and right at the front, non-pressurized return flow at the front Power take-off at the front Mounting plate with towing hook at the front Snowplow control system pre-installed Itjdpfxszviuts Aipok 1 pair of standard + 1 pair of work lights on the A-pillar Leaf spring suspension 4x4 all-wheel drive Palfinger PK 9501 crane from 2004 production, with 2 x hydraulic supports, Series S-106-SK-A, Mpa 30.0 with 3 x hydraulic extension Crane control from below + remote control Rearview camera 2 x LED reversing lights Rockinger trailer hitch Tipping platform (3-way tipper) L: 2,760 mm x W: 2,300 mm x H: 400 mm Tires 385/65R22.5, approximately 40% tread remaining at the front, approximately 80/80% at the rear Air connections red and yellow at the rear 3 sections at the rear for hydraulics 1+2 seats Telligent M/A with foldable coupling 2 x electric windows, 2 x electric mirrors + mirror heating Joystick control Hands-free phone system pre-installed Heated driver's seat Axle locks front and rear Headlight range adjustment Radio/CD Enhanced engine brake Rearview camera with monitor Price: €40,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust local court; for disputes exceeding this value, it is the Schwerin regional court. Errors, typos, and prior sale are reserved.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer. Isdpfxezu Nvzs Aipjtk

Year of construction: 2005, condition: used, End sheet tipping machine Sigloch VAM Year: 2000 - Infeed conveyor - Cold glue: HHS C-210 (nozzle) - End sheet tipping: 2 - Straight delivery (vertical) Book back gluing machine Sigloch SB-3000/2 Year: 2005 Iodszvd Eaepfx Aipjtk - Base for 1st spine glue system - Cold glue spine gluing - Intermediate drying station (infrared) - Base for 2nd spine glue system - Cold glue spine gluing - Hotmelt spine gluing - Premelter: Kolbus LH 370 - Back lining station - Conveyor (vertical) Nipping machine Sigloch DNH Year: 2005 - 2 pressing stations

Year of construction: 2017, operating hours: 800 h, condition: like new (used), functionality: fully functional, working width: 250 mm, For sale is a very compact and flexible dual-wave soldering system, type ATF 13/25, from the German quality manufacturer ATF. Without solder pot filling. Automation Technology GmbH (Collenberg). Very compact soldering system, can be operated in an office environment. The system does not require a compressed air connection or explosion protection. Ideal for small series production. Footprint without infeed and outfeed: 1600x850 mm Year of manufacture: 2017 Connection value: 400V/25A 14 kW Weight: 190 kg (without solder) Process width: 250 mm, maximum PCB size: 470 x 250 mm. With extended infeed and outfeed (770 mm each) Iodpfx Aezku Rceipjtk Accessories: 4 pcs soldering frames, extended with center supports 1 set of various hand tools (hydrometer, spoon, spatula, etc.) The system was only operated sporadically, approximately 6 times per year for half a day. Therefore, it is in like-new condition. Since the system was used with only one soldering wave, the second solder pump is still unused and included in its original delivery condition. Self-dismantling and pickup only! No shipping possible. Price negotiable.

Condition: used, mileage: 288,370 km, power: 132 kW (179.47 HP), first registration: 05/2003, overall weight: 7,490 kg, fuel type: diesel, color: red, next inspection (TÜV): 02/2027, gearing type: mechanical, emission class: euro3, total length: 6,700 mm, total width: 2,280 mm, total height: 2,830 mm, number of seats: 6, Equipment: ABS, Very nice fire engine TSF-W M.A.N 8.185 4x2 double cab with 4 doors First registration: 12.05.2003 288,370 kilometers ABS 6-speed manual gearbox Itsdpfxsx U Nv Ro Aipsk Cruise control Roof hatch Heated exterior mirrors 100 L fuel tank Wheelbase: 3,900 mm Tires: 235/75 R 17.5 M&S Towing equipment: ball head Towing device: Rockinger with 2-line brake system Double cab with 4 doors 6 seats 2 fittings for breathing apparatus Superstructure by TOMA, year of construction 2011 Water tank approx. 800 liters Pneumatic TEKLITE light mast 4 spotlights (24 Volt) Hose carrying baskets 4-section ladder JOHSTADT EL 200 FPN 5-200 pump, year 2011, driven by B&S engine type 6.5 205 cc petrol Differential taxation according to § 25a.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, component A and component B The dispensing head has been extended with a Y-shaped slide. - Manual adjustment for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for component A + B - Material pressure tank 50 l for component A Isdpfxjzgck No Aipotk - Level monitoring for component A + B - Material recirculation to the dispensing pump for component A and B - Material evacuation for component A - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Work table approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, component A - Transfer station for bung hole drum, component B - Dispensing control (Siemens PLC control based on S7-300) - Precision piston dispensing pump for component A and B - Positive displacement metering pump A, component, 257 ccm - Positive displacement metering pump B, component, 64 ccm --> 1 x spare positive displacement metering pump A and positive displacement metering pump B are included. These have been reconditioned by Rampf as an exchange unit. (see picture) Note: The potting system is located at our site in Austria.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 17,792 h, machine/vehicle number: 10082191/30038070, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: CO₂ laser, laser source manufacturer: Bystronic ByLaser 4025, laser hours: 25,742 h, laser power: 6 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, table length: 6,500 mm, table width: 2,500 mm, table height: 1,000 mm, type of input current: three-phase, type of cooling: water, overall weight: 28,900 kg, total length: 15,000 mm, total width: 3,400 mm, total height: 2,000 mm, year of last overhaul: 2026, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Parameters: Condition: Used Brand: Bystronic Manufacturer’s Code: Bystar L 4025-65 Description: The Bystronic Bystar L 4025-65 laser cutting machine was manufactured in Switzerland in 2018 and is designed for the precise cutting of shaped parts made from sheet metal, including carbon steel, stainless steel, and aluminum. The machine has been in continuous operation and has been serviced annually with original parts. Technical data of the laser cutting machine: - Laser power: 6 kW - Laser type: CO2 - Working table area (length x width): 2500x6500 - Material thickness range (steel): 0.8-25mm - Material thickness range (stainless steel): 0.8-20mm - Material thickness range (aluminum): 0.8-12mm - Cutting time: 17792 h Itodpfx Aiozt Nplepok - Machine operating time: 25742 h - Machine weight: 28,900 kg Equipment of the BYSTRONIC laser: - CNC control: Bystronic - Laser source: Bystronic ByLaser 4025 - Cooling unit: WKL 560 - Dust extraction unit: Donaldson

Condition: used, Year of construction: 1993, Empty weight: 1.860 kg Itedpfx Ajzuaw Ajipjk Carrying capacity: 4.640 kg GVW: 6.500 kg Please contact Emal Jaweed for more information

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Itjdpozuwhlsfx Aipok

Condition: used, Year of construction: 2019, operating hours: 8,889 h, Equipment: all wheel drive, Tigercat LH822D, a modern tracked harvester (forestry machine). This machine is used in forestry operations to simultaneously fell, delimb, and crosscut trees—a so-called cut-to-length system. Tracked harvester manufacturer: Tigercat Industries Functions: Timber harvesting, delimbing, crosscutting (cut-to-length) Application areas: Forestry, including selective logging and salvage operations Ijdpfx Asyawv Ioipotk Dimensions & Weight * Length (without boom): approx. 5,180 mm * Width: 3,430 mm * Height: approx. 3,710 mm * Ground clearance: around 685–710 mm * Weight (without attachment): approx. 33,800 kg (ca. 74.6 t) * Tail swing radius: approx. 2,095 mm Drive & Performance * Engine: Tigercat FPT N67 (Stage V, Tier 4f, or non-certified) * Power: approx. 212 kW (284 hp) up to 217 kW (291 hp) at 2,200 rpm Drivetrain / Speed * Maximum speed (low range): approx. 1.6 km/h * Maximum speed (high range): approx. 3.4 km/h Hydraulics & Controls * Main, harvester head, and cooling pumps: piston pumps; additionally, a transmission oil pump * Hydraulic oil reservoir: approx. 204 L Very good condition

Year of construction: 2005, condition: used, Case maker Kolbus DA 270 Year: 2005 Description: - Digital display - Board pre stacking conveyor - Centre strip infeed (stiff) Itjdpjzvd T Rjfx Aipsk - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Preheated glue tube - Viscosity control - Pressing station

Condition: used, color: other, Year of construction: 2009, Carrying capacity: 5 kg Lifting capacity: 5 kg Serial number: 16/890553 CE-certified: yes Equipped with an electric hoist Hoist brand: Abus Load capacity: 5 metric tons Span: 12,875 mm Single-girder construction Clearance height under the bridge: 5,000 mm Power supply: 380 volts, 50 Hz Lifting speed: 0.8 & 5 m/min Traversing speed: 5 & 20 m/min Travel speed: 10 & 40 m/min Includes remote control Radio-controlled remote Collision protection Two fixed hoisting speeds Itjdpszuwr Dsfx Aipjk - Dual drive at the top - No rails required; the crane moves across the floor An interesting selection of overhead cranes and semi-gantry cranes from renowned brands. Brands: ABUS, Demag, and KONE Lifting capacity: 5, 10, 15, and 20 metric tons Span width: up to approximately 30 meters Years of manufacture: 1989 through 2012 Models: overhead cranes and semi-gantry cranes The lots will be loaded onto your chosen mode of transport. The price is listed for each lot. If desired, transportation can be arranged for an additional fee. View the full selection, technical specifications, and auction terms on the auction page The online auction opens Sunday 16 August and closes Friday 28 August. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Itsdpfszuwhxjx Aipsk Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland