Used Karl Klink Chain, Continuous - Broaching Machine, for sale (69,265)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, overall weight: 370 kg, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 800 mm, broaching speed: 3 m/min, total length: 920 mm, total width: 800 mm, total height: 1,950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000kg (30kN) Broaching speeds: 3m/min and 6m/min Return speed: 3m/min Maximum stroke: 800mm Maximum tool length: 1,000mm Table size / working surface: 340mm x 220mm / 430mm x 310mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited (without spray guard cabin) Dimensions (h x w x d): 1,950mm x 820mm x 900mm (h = table height from floor without attachments) Motor: 3.5kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3m/min & 6m/min - External stroke adjustment, cross-machine reproducible tool length adjustment system - Integrated coolant unit with check valve and drain cock, including selector switch for automatic operation (does not automatically switch in swivel mode) - Patented coolant/lubricant swivel system - Three-sided enclosed, front-open spray guard cabin (no external operator panel) - Machine enclosure below the safety door with chip guard and tool storage area - Electrical cabling within steel protective conduits - Electrical jaw monitoring (tool removal control to prevent unintended retraction of the pull bridge) - Safety door with integrated emergency stop function - Control panel made from stainless steel sheet with permanent marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Remarks: The machine is fully overhauled, with the frame completely refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals replaced - Central drive shaft is new - Coolant system (pump, check valve and drain cock), including coolant/lubricant swivel system, is new - Jaws are new (pull bridge additionally reinforced) - A switchable jaw monitoring system has been installed (additional safety for operators and to prevent tool breakage) Lasdpfxeytvyxj Acfjf - A safety door with interlock has been installed instead of the rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with durable labeling - New geared drive motor (SEW) with toothed belt drive - Machine has been repainted with 2-component structural paint The machine is stored at our warehouse and can be inspected under power.

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer Ljdjcc D Ddepfx Acfsaf remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Lodpfxjhpqque Acfjaf Weight: 4,8to

Year of construction: 1967, condition: good (used), WKG 234 Offered here is a rotary table continuous milling machine milling from the company Müller of the type Duo Främatic. 
Technical data: Manufacturer: Müller Type: Duo Främatic Year of construction: 1966 Tool holder: ISO 50 Round table clamping surface inside: 650x1490mm travel: endless rotary small feed: 100mm/min large feed: 2000mm/min max. rotational speed: 650 rpm low speed: 88 rpm speeds: 8pcs weight: 5t milling spindles: 2 pieces distance table to spindle: 350mm Ljdpfog Ummaox Acfeaf power requirement: 27kW Remark: Suitable for carbide cutter heads (ø315mm) for light metal up to ø400mm. cutter lifting automatically with 1mm possible quill adjustment each 100mm drive of milling spindle separately possible There are several machines available!

Year of construction: 1983, condition: excellent (used), machine/vehicle number: 03.2133, Arthur Klink - internal broaching machine (KOM 138) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 16 x1250 x400 built in: 1983 stroke: 1250mm pulling force: 16.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer Lajdpfsd Nb A Nsx Acfof remark: in an excellent condition, ready to use, perfect slides Optional accessories available on request: pulling head, pick up tool holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Laodpsr A Hcbsfx Acfjf Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: used, Year of construction: 2000, Technical details: pulling force - max.: 2,5 t Lodow Dugajpfx Acfoaf max. ram stroke: 1000 mm max. workpiece diameter: 40 mm Broaching speed: 60 m/min. return speed: 20 m/min. total power requirement: 24 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m clamping plate: 320 mm It is a hydraulic machine. *

Condition: excellent (used), Continuous rotary table HAU R60 - 1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800mm, 3 polishing units with 7,5 kW each, polishing shaft diameter of 50 mm, width of polishing wheel 2 x max. 400 mm and 1 x 280 mm, diameter of polishing wheel s max. 420 mm, motorized longitudinal and height adjustment of polishing units, machine equipped with liquid compound feeding system More pictures on demand Lodsm Nbubjpfx Acfjaf

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Ljdpjlccvmsfx Acfeaf Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: M 09074, overall weight: 950 kg, power: 8 kW (10.88 HP), input voltage: 400 V, Technical Specifications: Manual Adjustment: 400mm manual adjustment Automatic Broaching Stroke: 250mm, automatic stroke Keyway Widths: 2 to 32mm Workpiece Diameter: 620mm Maximum Thrust Force: 20kN fixed value Cutting Speed: 15 m/min, infinitely variable Dimensions (W x D x H): 1000 x 1200 x 2440mm Net Weight: approx. 950kg Electrical Connection: 3 x 400 VAC, 50/60 Hz, 8kW Pneumatic Connection: not required Colour: Blue RAL 5001, Grey RAL 7035 Ledpfsyazc Sex Acfjaf For further details, please see the PDF description in the attachment.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Minimum panel length: 170 mm Maximum panel length: 2,500 mm Minimum panel width: 50 mm Laodpoxw U Arsfx Acfof Maximum panel width: 700 mm Drilling head positioning: NC Spindles for vertical drilling: 40 Spindles for horizontal drilling in "Y" direction: 6 Motor power: 3 kW Max. speed: 2,800 rpm Spindles for vertical drilling: 4+4 Motor power: 2.2 kW Max. speed: 2,780 rpm MACHINE DETAILS Number of injectors: 2 Number of storage tanks: 2 EQUIPMENT Control system: WINDOWS Wooden dowels Ø8 Note: Tools are not included in the offer.

Condition: used, Chain chisel machine, chiseling machine Laodpeqv A U Iofx Acfef

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, Digital automatic drilling machine BIESSE SKIPPER 130 Working condition. Ljdpfxsrkm R He Acfeaf Free for loading.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Lsdpfx Ajwg Sgcecfeaf Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW Lodpodfcqasfx Acfsaf The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under Aymas Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 120-180 kg (Steel), 50-80 kg (Aluminium),150-200 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.700mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.650mm x 2.300mm x 800mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 100-180 kg (Steel), 40-100 kg (Aluminium),120-180 kg (Copper) Laedjd Iya Nepfx Acfjf Press Box Dimensions (Width x Length x Height): 1.000mm x 2.600mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.500mm x 2.200mm x 650mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 919254, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale during the jeans factory liquidation is a GLOBAL US 63900 CH-NA-AUT automatic industrial chainstitch hemming machine, offered as a complete workstation. This modern (2019) unit is specifically designed for high-quality bottom hemming in denim, trousers, and workwear production. Built on the well-known 63900 platform, it delivers the classic chainstitch finish required in professional garment manufacturing. The machine features automatic functions including thread trimming and pneumatic operation, enabling efficient and consistent production with minimal manual intervention. The unit has been used in a professional production environment and was fully operational prior to factory shutdown. The machine has been serviced on 27.02.2026 and video recorded in full operation in April 2026. Key features: • Automatic chainstitch hemming system Ljdjy Ipu Topfx Acfjaf • High-speed production capability • Classic 63900 chainstitch finish (denim standard) • Automatic thread trimming • Pneumatic presser foot operation • Stable feeding and consistent stitch quality • Modern unit (2019 model) with low mechanical wear Includes: • GLOBAL US 63900 CH-NA-AUT machine head • Industrial sewing table • Motor and control unit • Foot pedal • Thread stand • Integrated hemming and trimming system • Suction system for thread and fabric waste (visible) Technical details: • Manufacturer: Global Selection (Netherlands) • Model: US 63900 CH-NA-AUT • Year: 2019 • Stitch type: Chainstitch • Max speed: approx. 5,000 stitches per minute • Needle system: DVx57 • Power: 220V • Pneumatic system required Condition: • Used, excellent production condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Denim bottom hemming • Garment finishing • Workwear production • Chainstitch hemming operations Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: used, Year of construction: 2008, XYZ SMX 5000 CNC Vertical Turret Milling Machine With Prototrak SMX Control Ledpfszvp E Eex Acfjaf Table Dimension 1,930 x 355mm (4 'T' Slots). Maximum Table Load 850kg. Axis Travel 'X'=1,524mm, 'Y'=596mm, 'Z'=520mm. Quill Ø116mm. Quill Travel 127mm. Spindle Nose to Table 620mm. Spindle Centre To Column Face 520mm. Speed Range 40-5,000rpm (7.5kW Motor). Spindle Taper ISO40. Power Drawbar. S/No. 11100 (2008). With Coolant System, Table Guarding, Work Light, Vertex Heavy Duty Vice (Jaw Width 205mm), Indexing Head 3 Jaw Chuck 200mm, Centre Height 170mm, 8 Drawer Steel Cabinet With Contents Of Spindle Tooling & Clamp Sets. Approx Overall Dimensions L5,805 x W3,143 x H2,690mm. Weight 3,100kg. Note: Machine Had Control Upgrade 2023.

Condition: used, Year of construction: 2006, FANUC ROBOCUT ALPHA- OiC WIRE ERODING MACHINE YEAR: 2006 X STROKE: 320.0mm RAPID: 900mm/min Y STROKE: 220.0mm RAPID: 900mm/min Z STROKE: 255.0mm RAPID: 900mm/min U STROKE: 120.0mm RAPID: 450mm/min V STROKE: 120.0mm RAPID: 450mm/min MAX. TABLE WEIGHT: 500.0 kgs COMPLETE WITH.... CHILLER SYSTEM COOLANT FILTRATION SYSTEM TRANSFORMER RENISHAW MACHINE MANUALS Ljdpfx Acjzv En Aofjaf

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Ljdpfxjzux Iys Acfeaf Weight: 2300 Kgs

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Spindle BT 30 Spindle 3hp 8 Station Tool Changer Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm Lsdpozu Ni Ujfx Acfoaf

Condition: excellent (used), Saxon Continuous Bag Sealer Stainless steel Ledpfxozcrlce Acfsaf Adjustable temperature control Electric adjustable mast height Mobile on castors Excellent condition

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Lajdpfozuxn Tex Acfjf Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Lodpfx Acezuxnajfjaf Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: SL281 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2022, functionality: fully functional, power: 2.2 kW (2.99 HP), travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 190 mm, overall weight: 2,000 kg, Description CNC milling machine (wood router), Schreinerei Bessler Holzfräse Speed 3021, with control console including monitor and keyboard. Specifications: Designation: CNC milling machine Type: Speed 3021 Serial number: 2022398 Operating voltage: 400 V Motor power: 2.2 kW Year of manufacture: 2022 Total weight: 2,000 kg X-axis travel: 3,000 mm Y-axis travel: 2,100 mm Z-axis travel: 190 mm Tool holder: ER20 Spindle speed: 1,000 to 24,000 rpm Working dimensions: 3,000 x 2,100 mm Overall (transport) dimensions: approx. 415 x 296 x 175 cm Machine weight: 2,000 kg Configuration: Gantry construction with work table Control console on mobile unit Extraction hose included Laedszvnazjpfx Acfjf Condition: Used Dismantled