Used Kemper Kemper F125 Sl for sale (2,564)

Condition: excellent (used), functionality: fully functional, Equipment: CE marking, CENTAURO SL 3000 Rip Saw Cutting length: 3470 mm Maximum cutting width: 600 mm Maximum cutting height: 160 mm Saw blade diameter: 550 mm Main motor power: 11 kW Feed rate: up to 80 m/min Ncjdpfx Ajy Tiv Uekuot

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Njdpfjfx Nfmsx Akujct Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ Ncedpfofy T H Iex Akuot 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. Ncodpfx Akjfz U Tqjuot It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Ncodpfoyg H Erex Akuet ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ Njdpofz U Nbsfx Akujct 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Ncjdpsfz Nd Iefx Akuet 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ Nsdpfxeflk Aws Akuoct At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ Nsdpfxsfy T Spe Akusct 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Ncodpfx Akefzkqmsust Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ Nodsyg H Dhepfx Akujct At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, empty load weight: 6,850 kg, maximum load weight: 29,150 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2011, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, color: white, Year of construction: 2011, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, * German semi-trailer * Refrigerated semi-trailer made of CFRP (carbon fiber reinforced plastic) in a single piece. As a result, it is considered virtually indestructible. * Condition: see photos * Body manufacturer: TTT The Team Composite AG, Stade * Frigoblock HK 25 SL * Cooling capacity: from -20°C to +30°C * Electric drive * Roller shutter door * Road and standby operation * Pallet capacity: 33 Euro pallets * Cargo space dimensions: 13,400 x 2,470 x 2,650 mm Nodpfx Ajwvuixskusct * Axles with disc brakes * First axle liftable * Air suspension + raising/lowering function * Storage box * Gross vehicle weight (GVW): 36,000 kg * Payload: 29,150 kg If a new TÜV inspection is required, we are happy to provide an offer from one of our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new SP, and without new UVV. More trucks can be found on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer—and strongly recommend—viewing and inspection of the goods, so that the buyer does not develop incorrect expectations regarding the condition and suitability. Inspections and viewings are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We do not accept liability for errors or incorrect information in this offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. - .

Condition: used, Year of construction: 1988, turning diameter ca. 570 mm turning length ca. 530-610 mm control FANUC ohne Gewähr Ncjdpfx Aeyiu Tpjkuot x-travel ca 160-200 mm y-travel ca. 560 mm weight of the machine ca. 4,5 - 5 t ca 10 oder 12 spindle bore 52-76 mm weight of the machine ca. 4 t

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,658 mm, total width: 432 mm, Tested forklift battery for your forklift - 80V 4PZS 620Ah - Special tray 2 + 1-year warranty + Includes aquamatic filling system + Includes end discharge resistor & REMA 320 connector (other connector types can be fitted on request) + Capacity: minimum 90–100% (C5 capacity protocol will be provided upon delivery) Ncodoy Rnq Sopfx Akuot + Year of delivery: 2024 Dimensions: Length 1,658 mm Width 432 mm Height 784 mm Weight: approx. 1,550 kg Suitable for the following models and more: Jungheinrich EKX 513 Toyota FBM20 Toyota FBMF16 Toyota FBMF25 Toyota/BT VCE 135 Bradshaw T20 Caterpillar EP20K Caterpillar EP20N Caterpillar EP25K Caterpillar EP25K PAC Caterpillar EP30CN Charlatte T135 Charlatte T135 EVO Combilift SL Daewoo B22/25 X-5 Daewoo B22/25 XL-7 Daewoo B25 X Daewoo B30 Daewoo B30 X-5 Daewoo B32 Daewoo B35 X Dimos EFY3004 Dimos EFY3504R Doosan B22X Doosan B22X-5 Doosan B25X-7 Doosan B30NS Doosan B30X Doosan B35NS Hubtex MD 30 Hubtex MQ 40 Hubtex MQ 45 Hubtex MQ 60 Mitsubishi FB25 Mitsubishi FB25AN Mitsubishi FB25K PAC Nissan 1Q2L25Q Utiley UT3OPFE Other standard battery sizes available on request. Transport can be arranged.

Condition: good (used), PTC relays, contactors, semiconductor contactors, relays, isolation amplifiers, temperature transducers Ncsdpfx Aef Ir D Aokujt -Manufacturer: Phoenix Contact, PT100 temperature monitor -Type: MCR-SL-PT100-SP -Price: per piece -Quantity: 7 pieces -Dimensions: 100/13/H115 mm -Weight: 0.1 kg/piece

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 230 mm, travel distance Z-axis: 520 mm, overall weight: 4,100 kg, number of axes: 5, This 5-axis MORI SEIKI SL-153 SMC was manufactured in 2000. It features a maximum X-axis travel of 230 mm and Z-axis travel of 520 mm. The machine includes a hydraulic chuck system, chip conveyor, and multiple driven tool holders for enhanced machining capabilities. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-153 SMC horizontal turning machine we have for sale. Contact us for further details. • Machine configuration • Enclosed CNC lathe • Hydraulic chuck system • Foot pedal included • Automatic bar feeder interface likely installed • Tooling and included holders • 3x radial driven tool holders • 4x axial driven tool holders • 2x for main spindle machining • 1x for counter spindle machining • 1x shared output for both spindles • 2x special double boring bar holders (bore Ø20 mm) • Prepared for Schunk TendoTurn DSE hydraulic clamping accessories (Schunk accessories not included) • Multiple external tool holders • Axial tool holders • Boring bar holders with Ø25 mm and Ø32 mm bores • Accessories for direct mounting of square shank tools on turret • Collet holders • 2x Bellegrandi collet holders type MSCTN52 & MSCTNR52 • Suitable for BA and BD type collets size 52 • For main and counter spindle use • Electrical data • Voltage: 200 V • Frequency: 50 Hz Nsdpey N Shlsfx Akuect • Full load current: 116 A • Spindle motor current rating: 76 A • Rated power: 40 kVA • Condition • Currently disconnected • Reported functional before removal • Available for inspection Additional equipment • Chip conveyor included (separate accessory) • LNS Hydrobar Sprint 555 / 3M automatic bar feeder • Serial number: 220250 • Year: 2006 • Bar length capacity: 3000 mm • Guide channel suitable for turning applications • Compatibility: Seller states compatible with Mori Seiki SL-153 SMC with minor modifications; reportedly never worked with this lathe previously • Condition: Reported functional Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, Trovalisier - and slide grinding machine Make: ABOAGYE Model: TV 95 SL Condition: new machine Speed: 1,500 3,000 rpm (stepless) Trough inside dimensions: 498 x 384 x 410 mm Filling volume: 70 l equipped as standard with: -Timer -Water tank -Water pump -Manual Ncedpfx Akodwq Hgoust

Condition: used, Year of construction: 2002, Empty weight: 75 kg Ncedpfewtx Umsx Akuet - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 991 - Voltage [V]: 230 - Current consumption [A]: 0.07 - Power [kW]: 0.1 - Transport weight [kg]: 75kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Ncsdpfx Asy N Dukekujt Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Year of construction: 2022, operating hours: 998 h, condition: used, functionality: fully functional, machine/vehicle number: 031022210023, We offer setup for SLS 3D printing consisting of Sinterit LISA X SLS 3D printing machine, Sinterit Powder Handling Station, Sinterit Sandblaster SLS and cadMIX powder mixer. Details reg. Sinterit LISA X 3D printer : Laser type: IR Fiber Coupled Diode Laser, 30[W]; λ = 976 ± 3 [nm] rated to > 30,000 hrs Max. size of print diagonally: 398 [mm] (15.7 [in]) Max print volume: TPU based / Flexible material: 130x180x340 [mm] (5.1×7.1×13.3 [in]) PA / PP: 130x180x330 [mm] (5.1×6.7×13.3 [in]) Layer height (min – max): 0.075 – 0.175 [mm] (0.003 – 0.006 [in]) Build Speed: up to 18.4 [mm/h] (0.72 [in/h]) Serial number: 031022210023 Manufacturing date: 05/2022 Country of origin: EU, Poland IEC protection class: Class 1 IP code: IP30 Machine type: Selective Laser Sintering 3D Printer Dimensions (W × D × H): 650 × 610 × 1200 mm (25.6 × 24.0 × 47.2 in) Total weight: 145 kg (319.0 lbs) Supply voltage range: 190–240 V AC Ncjdpoy Snn Hjfx Akust Supply frequency range: 50–60 Hz Maximum power consumption: 1650 W AC current: 8 A AC voltage for current rating: 230 V AC Number of phases: 1 Short-circuit current rating: 6 kA Total printing time : 998 hrs For more details and technical specifications please see attached .pdf documents. We are selling complete setup together not separately. Complete setup bought in Slovakia. Examples from printer are available. Box for transport is available. Printer has open system, it is possible to modify the parameters. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, empty load weight: 6,383 kg, maximum load weight: 29,617 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2021, next inspection (TÜV): 01/2027, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,650 mm, loading space volume: 28 m³, suspension: air, tire size: 385/65R22.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, alloy wheels, 3 axles, SCB axles (with disc brakes), air suspension, first axle liftable, raise/lower function, ABS (anti-lock braking system), tailgate, tarpaulin, side underrun protection, radio remote control. Body: 3-axle steel tipper approx. 28 m³ with electric cover, remote control, 3 x 9t SCB axles, disc brakes, first axle liftable, SCB sliding roof with remote control. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Nsdpfx Asymrnfekuect

Condition: used, empty load weight: 6,117 kg, maximum load weight: 29,883 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2021, next inspection (TÜV): 12/2026, loading space length: 9,807 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 52 m³, suspension: air, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 3 axles, SCB axles (disc brakes), air suspension, 1st axle liftable, raise and lower function, ABS (anti-lock braking system), sliding tarpaulin, catwalk, grain outlet, flap, underrun protection, side aluminum safety rails, supports. Body: 3-axle aluminum tipping trough with sliding tarpaulin, work platform & grain slider, approx. 52 m³, multiple units available! 3 x 9t SCB axles, disc brakes, 1st axle liftable, brake pad wear indicator, aluminum box trough with 2.5mm internal wall thickness, aluminum pendulum flap with 90° rubber seal, automatic mechanical 4-hook locking, aluminum floor with 7mm thickness (rear approx. 3,600mm with 8mm thickness), unladen saddle height approx. 1,260mm! Ncodpfxjvhl Iks Akust Supplier declaration from Schmitz available, EUR1 certificate possible! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Condition: used, maximum load weight: 33,400 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2008, total width: 2,600 mm, Year of construction: 2008, Prices shown are exclusive of BPM (private vehicle and motorcycle tax) and apply only for export. Ncedpfx Asymipaokuet

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 380 mm, turning diameter: 600 mm, spindle bore: 52 mm, spindle speed (max.): 3,500 rpm, chuck outer diameter: 254 mm, bar diameter (max.): 50 mm, controller manufacturer: Fanuc, controller model: Fanuc oiT, Equipment: documentation/manual, TURRET POSITIONS: PARTS CATCHER Njdpfx Aoygh Nxskusct TAILSTOCK CHIP CONVEYOR

Condition: used, maximum load weight: 29,539 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2026, Equipment: ABS, Schmitz Cargobull SKI SCB?S3D SL 8.2 Steel Round Body 31.9 m³ * Rear tailgate (overlapping) * Air suspension * Pneumatic controls * Disc brakes * Lifting axle on the 1st axle * Automatic lowering during tipping * Load pressure gauge * Hubodometer * Sliding tarp * Foldable underrun protection * LED lighting system * LED auxiliary headlights * SCB axles * 15-pin ABS connection * 15-pin power connection * 2 x 7-pin power connections * ISO air couplings with red and yellow coupling heads Nedpjy Nhdvjfx Akuoct Interim sale and errors expressly reserved! Sale exclusively in accordance with our General Terms and Conditions. Important notice – Important information: Despite careful inspection of all details in our offer, errors may occur. Some may be caused by transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal entitlement. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 of the German Civil Code (BGB). Rather, it is information for initiating a contract. The details provided are without guarantee and therefore do not constitute warranted characteristics.