Used Kinshofer Gripper for sale (790)

Condition: used, Year of construction: 2014, functionality: unexamined, overall weight: 1,000 kg, load capacity: 80 kg, arm reach: 2,456 mm, pivoting range: 180 °, Yaskawa Motoman MS80W industrial robot + DX 100 controller automation cell Description Machine designation: Robot arm Manufacturer: Yaskawa Model: Motoman MS80W Kodpfxexu Nc Us Afdsdk Serial number: S3Q057-1-2 Year of manufacture: 2014 Payload: 80 kg Weight: 580 kg Note: Without the end effector (gripper) for the handling robot Machine designation: Robot controller Manufacturer: Yaskawa Model: DX100 Serial number: 140545 Year of manufacture: 2014 Accessories: Discharge conveyor, enclosure, and access control As shown, functionality untested, but was in operation until recently.

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Kdjdpfxex Twcvs Afdek

Condition: used, Year of construction: 2012, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2012 Control : Siemens 840 D Speed : 12000 rpm Movement X/Y/Z : 1300/600/800 mm Tool holder : HSK 63 In General: Year of manufacture:2012 Control system:Siemens 840 D Traverse X/Y/Z:1,300/600/800 mm Spindle speed:12,000 rpm Kjdoyiwwqopfx Afdedk Spindle: Technology:Direct drive spindle Speed:12,000 rpm Power:30 kW Torque:191 Nm Tool holder:HSK 63 NC swivel head: B-axis:+/- 105° Clamping torque:4,200 Nm NC rotary table: C-axis:360 ° Drive:Direct drive (torque) Clamping surface:630 mm Torque:600 Nm Max. table load:1,000 kg Tool magazine: Technology:Chain magazine Tool changer:Double gripper Number of stations:48 Tool diameter max.:70 (130) mm Tool length max.:340 mm Equipment: Position sensors:Direct scales Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 40 bar Workpiece measurement:Renishaw Touch probe Tool measurement:Blum Laser Emulsion mist separator:LTA, electrostatic

Condition: excellent (used), power: 120 kW (163.15 HP), operation weight: 20,500 kg, tire condition: 35 %, Year of construction: 2016, operating hours: 11,405 h, Equipment: air conditioning, Liebherr A920 Litronic year 2016 operation hours 11.405 hrs ROPS Airco Radio Back drive camera Hyd. 2 piece boom stick 2,60 meter all hydr. lines (hammer-, gripper, scissor-) quick coupler SW48 Likufix Central lubrication Hydr. adjustable bucket – width 2,00 meter tyres: 10.00-20 approx 30-40% good blade support engine with 120kW CE Transport : 9.2x2.75x3.35m Operation weight: 20,5 to. Kdjdpfoxgtdtex Afdek

Condition: used, machine/vehicle number: 008438, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade projection: 60 mm Kdsdpfxeyngy Sj Afdek No of Grippers: 8

Condition: used, Year of construction: 2014, machine/vehicle number: 0101-250007, The reconditioned Behringer Eisele HCS 160 MF metal circular saw is a fully automatic straight-cutting machine. The HCS160MF is a high-quality, robust machine that has been specially designed for professional use and for the highest cutting performance in metal processing. The saw is also designed for multi-shift operation. It offers an excellent combination of performance, precision and versatility, making it particularly suitable for larger series. The HCS160MF fully automatic saw includes a comprehensive material loading and unloading system. The loading magazine is positioned on the infeed side, while on the outfeed side, short pieces can be pushed off the belt via the unloading device at three positions through a pusher into the containers provided for this purpose. The system is in very good condition. This HCS 160 MF straight cut circular saw consists of: Ksdpfoy Akrisx Afdsdk Behringer Eisele HCS 160 MF straight cut circular saw Feed gripper for material transport in the saw Behringer Eisele loading magazine Behringer Eisele unloading device Siemens SPS control system Chip conveyor

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mm Turning length : 700 mm In General: Max. workpiece diameter:140 mm Chuck diameter:250 mm Max. turning length:700 mm Track I: Tool carrier I:Tool turret (X/Z) Tool drive:9,600 rpm, 44 Nm Tool holder:BMT Number of stations:11 + 1 Part gripper X-axis:310 mm Z-axis:1,115 mm Position sensors (X/Z):Direct scales Track II: Main spindle (OP10):Travelling direct drive spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:Collet chuck Clamping cylinder:Hydraulic clamping cylinder Support control:Pneumatic W-axis:772 mm C-axis:0.01° Ksdpfx Afoy A U I Isdjdk Position sensor (W):Direct scale : Sub-spindle (OP20):Direct drive spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:2+2-jaw power chuck Clamping cylinder:Hydraulic clamping cylinder C-axis:0.01° Track III: Tool Carrier II:Tool turret (X/Y/Z) Tool drive:9,600 rpm, 44 Nm Tool holder:BMT Number of stations:11 + 1 Part gripper X-axis:310 mm Y-axis:50 mm mm) Z-axis:1,115 mm Position sensors (X/Z):Direct scales Track IV: Main spindle (OP30):Travelling motor spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:Collet chuck Clamping cylinder:Hydraulic clamping cylinder Support control:Pneumatic W-axis:988 mm C-axis:0.01° Position sensor (W):Direct scale : Tailstock:Fixed arrangement Quill:Hydraulic with position control Track V: Tool Carrier III:Milling/turning turret (X/Z) Tool drive:1,000 rpm, 240 Nm Tool holder:HSK-63 Number of stations:5 + 1 Part gripper X-axis:310 mm Z-axis:1,115 mm Position sensors (X/Z):Direct scales Automation: Feed conveyor:O-type, 18 base carriers Discharge conveyor:O-type, 18 base carriers Part transfer:3 grippers on tool turret Max. workpiece diameter:140 mm Max. workpiece height:630 mm Workpiece weight:max. 20 kg Equipment: Position measurement systems:Direct (glass scales) Chip removal:Chip conveyor Workpiece measurement:Renishaw OMP Coolant supply:Internal coolant with filter, 17 bar Coolant temperature control:Immersion recooler Emulsion mist separator:Mechanical Software option I:Turning/milling operation Software option II:Automatic retraction Software option II:Sister tool management

Condition: used, machine/vehicle number: 008502, Max. panel width: 3800 mm Kjdpsy Edp Hofx Afdjdk Max. panel length: 3800 mm Main saw blade projection: 110 mm No of Grippers: 11

Condition: used, machine/vehicle number: 006006, Max. panel width: 2300 mm Kdodpsu Rv Uqsfx Afdek Max. panel length: 4300 mm Main saw blade projection: 135 mm No of Rip saw Grippers: 7 No of Cross Cut Grippers: 20 Second flexible pusher: yes Panel Rotation Station: yes

Condition: excellent (used), power: 40 kW (54.38 HP), Year of construction: 2008, operating hours: 8,612 h, CATERPILLAR 308C CR year 2008 operation hours: 8.612 hrs. ROPS Monoboom Stick: 2,20 meter All hydr. lines (hammer-, gripper-, scissor-) OQ45 quick coupler 1x bucket with 1 meter u/c: approx 50-60% good Kdedey Anzhepfx Afdek trackshoes: 450 millimeter width rubberpads 70% good blade support Misubishi engine with 40.5 kW CE/EPA Operation weight: 8,3 to.

Year of construction: 2022, condition: used, Westtech Woodcracker CL190 Available immediately Year of manufacture: 2022 - Cutting diameter softwood (mm): 250 - Cutting diameter hardwood (mm): 190 - Gripper opening = shear opening (mm): 685 - Own weight (basic – fully equipped) (kg): 210 – 310 - Recommended oil flow main circuit (l/min): 40-80 Kdodpfoyfpmpsx Afdek - Recommended operating pressure main circuit (bar): 250 - Recommended oil flow auxiliary circuit (l/min): 20-30 - Recommended operating pressure auxiliary circuit (bar): 200 - Carrier vehicle operating weight (t): 2.5 – 7.5 - Optional: Autospeed - Optional: Accumulation gripper - Optional: Cylinder slewing drive: 2 x 40° Adapter plates (MS01 / MS03 / MS08 / etc.) available on request. We are the official distribution and service partner for Westtech Woodcracker, Magni telehandlers, JCB construction machinery, Mercedes-Benz service, Iveco service, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Rental available = Further information = New: Yes Contact Tobias Ebert for more information.

Condition: used, Westtech Woodcracker C350 Immediately available Equipment: Ksdjyfq Ibepfx Afdedk - Collection grab - Endless rotatable tiltator - Autospeed function - Cutting diameter for softwood: 400 mm - Cutting diameter for hardwood: 350 mm - Gripper opening width: 1,430 mm - Shear opening: 700 mm - Hydraulic flow: 70–150 l/min - Hydraulic flow for auxiliary functions (e.g. rotation function): 45–60 l/min Adapter plates available on request. We are an official sales and service partner for Westtech Woodcracker, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Westtech Woodcracker product range! Rental possible = Further Information = New: Yes For more information, please contact Tobias Ebert.

Condition: used, Westtech Woodcracker CS510 Crane Grapple Saw for Cardanic Mounting Available immediately Specifications: - Cutting diameter: 540 mm - Gripper opening width: 1,270 mm - Own weight (with full equipment): 360–400 kg - Recommended oil flow rate: 50–110 l/min - Recommended operating pressure: 200–280 bar - Saw chain lubrication: Oil We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We provide the complete range of Westtech Woodcracker products for you! Rental possible = More information = Kjdpsyfu Eqsfx Afdsdk Condition: New Please contact Tobias Ebert for further details.

Condition: used, Westtech Woodcracker CS750 Smart Available immediately Features: - Endless rotating tiltator - Cutting diameter: 750 mm Kdsdpfoyfqz Ujx Afdok - Gripper opening width: 1,280 mm - Own weight (basic/fully equipped): 820/980 kg - Recommended hydraulic flow rate: 65–110 l/min - Recommended operating pressure: 230–280 bar - Carrier vehicle operating weight: 15–30 t - Saw box: actively suspended - Saw chain lubrication: grease - Optional: Power tiltator, endlessly rotatable Multiple units in stock / fits perfectly on Magni RTH 6.30 SH & Magni RTH 6.35 SH. Can also be supplied in combination with a Magni machine. Also compatible with Merlo. We are official Westtech Woodcracker sales and service partners, Magni telehandler sales and service partners, JCB construction equipment sales and service partners, Mercedes-Benz service partners, Iveco service partners, and with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Rental available = Further information = New: Yes Contact Tobias Ebert for more information.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Technical details turning diameter 356 mm turning length 510 mm control M 730 BM travel -x axis 260 mm travel -y axis -50 / +50 mm travel -z axis 590 mm Travel subspindle (B) 624 mm bar material dia. 65 mm main spindle speeds: 5000 transmission ratio 2 power capacity 15 / 11 kW Subspindle spindle speeds 6000 power capacity 11 / 7,5 kW rapid traverse (X,Y,Z,B) 30/10/30/30 m/min weight of the machine ca. 6,6 t Additional information * CNC control Mitsubishi M 730 BM * Mainspindle with 3-jaw power chuck KITAGAWA N-08, diameter 210 mm * Subspindle with 3-jaw power chuck HAINBUCH B-TOP 165-43 * 12-station turret, tool spindle speed 10000 rpm, power 5.5/3.7 kW * Y-axis travel * C-axis * High/low pressure chuck system for main and subspindle * MABEO high-pressure pump with 1.5 MPa filter unit * Coolant sprayer on the chuck for main and subspindle * Coolant sprayer for the machine bed cladding Kdedpfeyzzi Njx Afdjk * Oil mist separator * Chip conveyor * Renishaw workpiece measuring system with optical signal transmission, subspindle * Cooling of the ball screw in the X-axis * Gantry loader, left-hand installation, 14-station storage, 20-pallet workpiece storage, Double gripper conveyor

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC turning and milling centre with Y-axis, 2 turrets, subspindle and bar feeder. A total of over 44,000 EUR has been invested in necessary repairs and maintenance over the last 5 years by DMG MORI (replacement of the main spindle S4, ball-screws, etc.). Technical details turning diameter 100 mm turning length 320 / 345 mm swing diameter 145 mm spindle distance 580 mm slide I - cross travel (X1) 220 mm slide I - longitudial travel (Z1) 320 mm y-axis +/- 30 mm rapid traverse (X/Y/Z) 30/15/30 m/min slide II - cross travel (X2) 120 mm slide II - longitudial travel (Z2) 345 mm rapid traverse (X/Z) 30 m/min Travel subspindle (Z3) 380 mm vertical stroke (X3) 145 mm bar material dia. max. 36 mm rapid traverse (X/Z) 20/30 m/min power capacity (40/100 % ED) 26/21 kW spindle turning speed range 40 - 7200 rpm total power requirement 42 kVA weight of the machine ca. 5,3 t Equipment: - SIEMENS 840 D powerline CNC control - Number of controlled axes: 9 - 2 x C-axis - Y-axis in upper turret - Pick-up device with gripper - 2 SAUTER turrets with 12 tool positions (driven), VDI 25 - Tool drive with a speed range of 30 to 6000 rpm - Coolant system with paper band filter - Chip conveyor Ksdpsyzzhrefx Afdjdk - Collet chuck on main and subspindle - Bar loading magazine, make: IEMCA BOSS 332 E 32 L, max. bar length 3180 mm

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Kdjdpfey Dq Adjx Afdsk Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: defective spare-parts repository (used), functionality: not functional, Year of construction: 1984, For sale: disassembled Henke Variant 1400x700 line: 1. Double-hopper Henke vibropress 2. Pallet magazine 3. Wet product feeder 4. 9-tier stacker 5. Pallet receiving wagon 6. Shelves (drying chamber) 7. Finished product feeder 8. Packaging line: - Layer compression gripper - Layer stacking gripper - Strapping device - Pallet turning gripper - Pallet washing unit Kdsdjy Avxbopfx Afdsk 9. Scapular discharge feeder 10. 21 production moulds 11. Control cabinets (Siemens S5)

Condition: used, Year of construction: 2004, machine/vehicle number: SO127, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it reaches up to 13,000 bottles per hour, supporting scalable output for medium to high-speed lines. The machine is optimized for PET containers and is suitable for diverse beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones engineering ensures excellent reliability, consistent bottle quality, and streamlined changeovers. Designed as a versatile component for a used bottling line or as a standalone blow molder, this second hand system delivers precise preform handling and stable heating, coupled with efficient blowing performance. It features an Alaska thread finish, an 8-cavity configuration, and a clockwise work direction, making it a proven choice for beverage production and industrial packaging where uptime and repeatability are critical. Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Manufacturing year: 2004 Configuration: Rotary Maximum speed: 13,000 bph Container material: PET Current bottle format: 0.5L No. of cavities: 8 Thread/neck finish: Alaska Max container height: 350 mm No. of grippers (inlet–outlet): 6 Kdjdpfxex H Tf Te Afdok No. of mandrels: 180 Work direction: Clockwise Working plane height: 1470 mm Electrical supply: 400 V, 3-phase, 50 Hz Operating current: 331 A Operating pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation & Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and fast diagnostics. The control architecture supports stable preform heating profiles, accurate blowing cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are integrated into the guarding and access points to support consistent production with minimized downtime. Production Line Integration Capabilities This blow molding machine can operate as a standalone unit or integrate seamlessly into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Format changeovers are streamlined around the 8-cavity rotary platform, and the Alaska neck finish provides compatibility for a wide range of closures and filling monoblocks across beverage production. Machine Condition & Maintenance History The machine is available in multiple supply configurations: as-is, refurbished and guaranteed, or ready for operation with compatible spare parts. When supplied refurbished, a 6-month warranty is available, offering confidence in performance and longevity for second hand indus...

Condition: used, Year of construction: 2009, machine/vehicle number: SO128, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Machine Condition & Maintenance History The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts. A 6-month warranty is available when supplied refurbished. These options provide flexibility to match project timelines ... Kdodpfox H Tgdex Afdek

Condition: excellent (used), power: 105 kW (142.76 HP), Year of construction: 2011, operating hours: 10,154 h, Equipment: air conditioning, cabin, Liebherr A904C Litronic year 2011 operation hours 10.154 hrs ROPS Airco Protection Cabine Radio Back drive camera Kdodpfeyz Sdkjx Afdok Hyd. 2 piece boom stick 2,60 meter all hydr. lines (hammer-, gripper, scissor-) quick coupler SW48 Likufix Central lubrication 1x bucket – width 1 meter solid rubber tyre size 10.00-20: front approx 15% good, rear approx. 50% good blade support engine with 105kW CE / EPA Transport : 8.5x2.75x3.30m Operation weight: 20 to.

Condition: ready for operation (used), Year of construction: 2016, clamping force: 4,000 kN, screw diameter: 70 mm, total width: 2,300 mm, overall weight: 22,700 kg, product length (max.): 8,000 mm, This 3-axis Arburg 820 S 4000-2100 hydraulic injection moulding machine was manufactured in 2016. It features a clamping force of 4000 kN, a platen size of 1171 x 1171 mm, and a maximum mould installation height of 850 mm. With a screw diameter of 70 mm and an injection unit of 2100, this machine is well-equipped for high-quality moulding capabilities. Consider the opportunity to buy this Arburg 820 S 4000-2100 hydraulic injection moulding machine. Contact us for further details. • Control system: SELOGICA direct • Distance between tie bars: 820 x 820 mm • Platen size: 1171 x 1171 mm • Max. mould installation height: 850 mm • Max. opening stroke: 700 mm • Max. daylight: 1550 mm • Ejector force: 100 kN • Ejector stroke: 250 mm • Max. weight of movable mould half: 4500 kg • Injection unit: 2100 • Heating zones: 6 + nozzle • Drive power (hydraulic pump): approx. 55 kW • Total installed power: 88.9–96.2 kW • Total connected load: 124 kW • Operating voltage: 400 V 3~ 50 Hz • Machine cycles: 4,157,591 • Pump hours: 69,800 h • Automatic operation hours: 58,556 h • Machine options: 2x core pulls, AES Energy Saving System Kdodeyzrddspfx Afdjk Additional equipment • ARBURG Multilift Select 15 kg robot (2016, transverse) • Load capacity: 15 kg • Y-axis stroke extension: 1400 mm • C-axis: pneumatic 0/90°, 28 Nm torque • Vacuum equipment: 2 circuits (23 l/min each) • Gripper interface: 8 inputs / 4 outputs (programmable) • Valve equipment: 5/3-way valve • Safety: monitored adjustable workspace • Conveyor belt: 800 x 2500 mm • Air blow unit

Condition: used, Year of construction: 2019, - - - - - - - - - - - - - - - - - - - - - - - - - - - Robot cell | HALTER - LoadAssistent S-230-35 equipped with a FANUC Robot M-20i and a HALTER 3-finger gripper Kdodexnqzrjpfx Afdek The Robot cell is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Load Assistent S-230-35 | LoadAssistentS-230-35 | Load-Assistent S-230-35

Condition: used, Year of construction: 2006, travel -x axis 500 mm travel -y axis 450 mm travel -z axis 400 mm c-axis 360 b-axis 0 - 108 ° surface area d: 500 x 380 mm control HEIDENHAIN - iTNC530 number of spindle speeds 20 - 18.000 U/min numbers of positions in the tool changer 60 tool taper HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor. Additional equipment: - Infrared probing system Heidenhain TS 640 - Laser tool measurement system - Belt filter system The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Kjdpfxeyvkuqe Afdodk - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU50Evo | DMU50 Evo | 50Evo

Condition: excellent (used), Year of manufacture: 2018 Reach: 1300 mm Payload: 10 kg Robot weight: 28.9 kg Repeatability: ±0.1 mm Gripper: Schunk RH 907 Force sensor joint: AXIA80-ZC22 Kjdewtp Tmspfx Afdsdk Software for controlling the above-mentioned devices and cameras (cameras not available) Control: handheld terminal + control cabinet Table not included