Used Kolbus Kolbus Bla 500 - Cp 500 - Bp 200 - Bp 500 - Sg 500 (2022) for sale (34,067)

Condition: new, Year of construction: 2025, power: 5 kW (6.80 HP), SAPI Premium 200-liter pressure blast machine with cyclone cleaner and abrasive vacuum for abrasive treatment. This blasting system provides a cost-effective, highly economical, and effective solution for open blasting work with semi-automatic abrasive recycling. Blsdpewc Rcnjfx Ahmen Open blasting system for manual sandblasting of many different types of workpieces using a blaster with abrasive treatment. The abrasive is collected by hand after blasting and pushed into the collection hopper on the floor. The abrasive vacuum extracts the abrasive from the hopper and pulls it through the cyclone cleaner. The dust is extracted and collected in the dust container of the vacuum. Coarse particles are separated by a sieve. The cleaned abrasive falls back into the vented pressure blast pot and is available for reuse. Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control allows you to start and stop the blast pot using a hand lever mounted on the blast hose package. This is a highly economical and effective solution for open blasting operations with semi-automatic abrasive recycling. The scope of delivery includes: SAPI Premium 200-liter blast pot with 1 1/4" piping, pressure-regulated from 0.1 - 12 bar, max. operating pressure 12 bar High-performance 1 1/4" water separator, permanently installed on the unit SAPI safety shut-off device Cyclone cleaner for abrasive preparation with lifting device Abrasive sieve (inserted sieve in the blast pot hopper) Filling hopper 500x500x380 mm 4-meter connecting hose from the filling hopper to the cyclone cleaner 3-meter connecting hose from the cyclone cleaner to the abrasive vacuum cleaner Abrasive vacuum cleaner 5.5 kW, 400 V, 50 Hz with 70-liter dust container 10-meter blast hose package 25x7 mm, fully assembled with nozzle holder, hand lever, control line, and blast hose coupling Boron carbide Venturi long nozzle (diameter optionally 6 mm) mm, 8 mm or 10 mm)

Year of construction: 2023, condition: used, KOLBUS Grooving Machine NM 101 year 2023 For cutting grooves into cardboards. Configuration: - adjustable knife mountings with knife head from 90° to 110° (2 pcs.) - v-groove knife blades (16 pieces) - setting device for the knife mountings - stack/stream cover delivery by means of a conveyor belt - automatic chip removal from the machine - servo-controlled drive technology based on Siemens technology Bsdjz E Nyxepfx Ahmoln - infeed with cardboard feeder CF 750 - processing in the double magazine - product outfeed with 1.500 mm roller conveyor - digital display of the knife positions for one knife holder - grinding device for sharpening the knives Technical specifications: number of grooves per operating step: 1 - 8 grooves in transport direction cardboard thickness max.: 4 mm cardboard thickness min.: 1 mm distance between grooves (single cut) on 2 knife holders min.: 1 mm distance between grooves on one knife holder min.: 40 mm spacing from the first groove to the outer edge of the cardboard min.: 15 mm

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 500 x 200 mm Bjdod Dzlqopfx Ahmeln -4x T slots: 14 mm -Clamping angle: rotatable, swiveling, tiltable -Foot recording: mm -Dimensions: 500/300/H210 mm -Weight: 50.5 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE125 series is an electrically powered high-pressure machine for pressures ranging from 200 to 2500 bar and a flow rate of 21 to 240 l/min. The frame is made of hot-dip galvanized sheet metal components and side frames made of stainless steel. Four rubber feet ensure secure positioning. A lifting eye facilitates the transport of the machine. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: Bljdjhga Rxjpfx Ahmjn ----- 50 Hz - bar - l/min. CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and others, see data sheet and available upon request. General specifications: ----- Power of the drive motor: 90 kW (50 Hz) / 90 kW (60 Hz) Voltage: 400 V (50 Hz) - 440 V (60 Hz) Amperage: 81 A (50 Hz) - 108 A (60 Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Including standard accessories.

Condition: used, Precision lathe with cycle automation for chuck and shaft work, digital drive technology (Sinamics S120) and a Siemens Sinumerik 840D sl control running WEILER's operator-oriented SL2 software. Distance between centres 2000 mm, swing over bed 570 mm, spindle bore 83 mm, main drive 20/17 kW up to 2500 rpm. Year of manufacture 2022. Bsdezl Ipnepfx Ahmsln

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation Blsdpjdzp Tcofx Ahmsn - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a flow rate of 25 to 350 l/min. The frame is made of hot-dip galvanized sheet metal components and side frames made of stainless steel. Four rubber feet ensure secure positioning. The lifting eye facilitates the transport of the machine. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others available upon request. General specifications: Bedpfx Ahshga S Djmeln ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Including standard accessories.

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 15 [kW] - Spindle speeds : 5.000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 356 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 590 [mm] TAILSTOCK Bedpjzqgy Aefx Ahmoln - Tailstock type : Numérique - Tailstock stroke : 564 [mm] - Type of cone : CM4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 23 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.705 x 1.922 [mm] - Machine height : 2.120 [mm] - Machine weight : 5.400 [kg] EQUIPMENT - CNC : MORI MSX-850 - Tool probe : Renishaw - Coolant tank - Spindle cooling unit - Chips conveyor - Chuck 3 jaws - Electric transformer

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: MIKA38005, 1 ABUS LW wall-mounted jib crane, 500 kg payload / lifting capacity Outreach 3 m, 500 kg payload With Abus GM chain hoist, 500 kg capacity Weight incl. wall bracket approx. 250 kg Complete with chain hoist, cable trolley, travel carriage and small parts Slewing range 270° Bledpfxoyzbl Do Ahmsn Item location is 75053 Gondelsheim System is fully dismantled and immediately available Shipping via freight forwarder or collection Please enquire about shipping costs by postal code

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2026, overall weight: 49 kg, total length: 600 mm, total width: 500 mm, total height: 850 mm, Work table AT 500, drawer cabinet TOP work table, catering bakery table Stainless steel design with 3 drawers Drawers with integrated handle strip Dimensions approx.: 500 x 600 x 850 mm, W x D x H Used, like new Option: Blodpfoyhy H Asx Ahmjn Delivery service Castors/wheels, new Visit our large showroom!

Condition: used, Year of construction: 2002, functionality: limited functionality, We are selling our complete perfect binding line, including: ZTM 18 stations (16 feeders + 2 manual stations) Three-knife trimmer HK 151.P 593, optionally with all cassettes and dies Drying tower Bljdpfez Eynyox Ahmsn Complete conveyor system with outfeed station PUR gluing system Hot-melt gluing system Optional: Disc gluing system Optional: Compressed air unit Optional: Replacement milling cutters Optional: Replacement knives The binder has been in operation with us for 5 years and has been brought into top condition with a total of €300,000 in maintenance and repairs. For example, various feeders have been replaced (approx. €5,000 per feeder). The binder has been idle for just over 2 years due to a staffing situation. The binder is currently being dismantled by a specialist company, which would also be able to install and commission the binder at the buyer’s location. The binder needs to be sold because we are installing a new printing press and need the space. Option A: Sale of the complete system Option B: Sale of individual components We would be happy to provide further pictures or a short video showing the setup/current layout of the binder.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Blsdpfx Aheytr Swomon Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: like new (used), 1000 liters of dielectric fluid Bledpeh Rxxxjfx Ahmon IonoPlus IME-MH or BP200 stored in an IBC tank.

Condition: good (used), Vemag Filler & Depositor Bedoz Hl Uhopfx Ahmeln Model Robot 500 Year 2016 Complete with depositor Just removed from production

Condition: ready for operation (used), Romanian Slotters MH500, M 320 And M 200 Stroke 500mm, 320mm and 200mm Bedpotz S Hcsfx Ahmjln

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: NL201FC1175, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, controller model: MSX-850 III CONTROL, The machine has only been used for plastics! TECHNICAL DETAILS Travel X-axis: 260 mm Travel Y-axis: 100 mm (+/- 50 mm) Travel Z-axis: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Number of driven tools: 3 Tool turret: 16-position Bar capacity: 65 mm Axes: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg Bodpfxjxyidpj Ahmoln EQUIPMENT Parts catcher chuck Driven tools Tailstock Parts catcher Tool setting probe Dust extraction system

Condition: ready for operation (used), FC 200 203 500 control board SN:76747, used, minor signs of wear, 100% fully functional, scope of delivery as shown in photos Bjdpfx Ahjx Et R Hemsln

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, hydraulic short-stroke cylinders, hydraulic flat cylinders Bsdpjwxtw Tjfx Ahmjln -Manufacturer: FAG, single-acting light alloy cylinder with spring return, stroke 210 mm -Type designation: LZM 25/200 PN500 8607 -Stamp diameter: 63 mm -Lifting capacity: 25 t -Pressure range: max. 500 bar -Dimensions: 140/110/H365 mm -Weight: 12 kg

Condition: used, Year of construction: 2006, total width: 3,580 mm, total height: 1,840 mm, Colour: Grey Empty weight: 3.500 kg Dimensions (LxBxH): 180 x 358 x 184 cm - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 106992 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 30 - - Max. planing block diameter [mm]: 130 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 Blsdpfxozguqzj Ahmjn - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 7.5 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Tool present: Yes - Max. planing width [mm]: 240 - Max. planing height [mm]: 130 - Feed table length [mm]: 1780 - Feed roller diameter [mm]: 130 - Feed motor [kW]: 3 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 140 - Feed speed: Manual - └ Max. feed speed [m/min]: 4 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 88 - Fuse [A]: 100 - Power [kW]: 41.0 - Transport dimensions: 1800mm x 3580mm x 1840mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, Extraction capacity approx. 6500 m3/h Motor power 5.5 kW Speed ​​3000 rpm Rated voltage 400 V, 50 Hz Extraction nozzle 280/200 mm Extraction speed 28 m/sec. Number of filters 37 Negative pressure 3000Pa Filter category G Polyester filter material Noise level 80 dB without connection / 65 dB when connected to the machine via the pipe Filter area 17.1 m2 Blsdpfx Asv Dtl Ajhmsn Dimensions (L x W x H) 2080 x 920 x 2100 mm Weight 248 kg

Condition: used, Year of construction: 2010, Gathering element(s) Kolbus ZU 832.A Year: 2010 Description: - Number of elements: 1 - Number of gathering stations: 3 - ATC thickness control Blodpfx Aszhvn Rshmen - Optical sheet control: Signalynx Maximum size: 460 x 320 mm Minimum size: 105 x 105 mm Max. mechanical speed: up to 8.000 cycles/h

Year of construction: 2017, condition: used, Case maker Kolbus DA 270 Bookjet Edition Year: 2017 Equipped with: Blsdpfx Ajzhwu Eshmen - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation process - Counter stacker delivery with following roller conveyor - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - Viscosity control device for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Device for inside lining with hot-glue - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device (optional available new!) - With board centre strip magazine, boards height min. 130 mm - Board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip, device for cutting rigid centre board strips to width, with possible width variation from cycle to cycle - Kolbus Turning Device WE 260, year 2017 (counter: only approx. 4,7 mio. book cases) Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 670 x 390 mm - Open cover size min.: 205 x 140 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width closed: 8 - 15 mm - Cloth width: 223 - 708 mm - Cloth height: 130 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm

Condition: used, total height: 400 mm, total length: 5,000 mm, plate width: 2,000 mm, Four clamping plates with T-slots Dimensions: 5 m x 2 m x H 0.4 m – used, as shown in the picture Each plate has 10 T-slots manufactured according to DIN 650 – 35H12 – slot width 35 mm, load-bearing capacity per plate approximately 20 tons per square meter, weight per plate approximately 9,000 kg. Blodpfezhi I Rjx Ahmsn

Year of construction: 1976, condition: used, Embossing machine Kolbus PE - PE 70 Year: 1976 Tandem configuration consisting of 2 interconnected Kolbus PE 70 embossing machines. - Case pre-stacking conveyor - Case bending station: DBA Bedjzat H Aspfx Ahmjln - Foil transporting device - Case infeed 90° swivelling

Condition: like new (used), functionality: fully functional, fuel type: electric, overall weight: 900 kg, lifting height: 26 mm, drive condition: 100 %, Year of construction: 2025, hydraulic flow rate: 9,000 l/min, For sale is a new, unused, ex-display EVAK ETP submersible slurry pump, designed for pumping heavy and highly abrasive slurries. This pump offers an attractive price alternative to slurry pumps of a similar class offered by TOYO and Dragflow. It is designed, among other applications, for pumping mixtures of water with sand, sludge, gravel, bentonite, slag, coke, and other sediments containing heavy solid particles. It can be used for desilting tanks, cleaning sedimentation tanks, extracting aggregates and minerals, and in construction and dredging works. The pump is equipped with a mechanical agitator, which stirs up the material at the bottom and facilitates its transport to the impeller. The components most susceptible to wear – the impeller, the inlet plate, and the agitator – are made of high-chromium steel containing 24–28% chromium. The low-speed, six-pole motor, operating at 960 rpm, reduces the wear of hydraulic parts when working with abrasive materials. The pump has a closed impeller, replaceable wear plates, and adjustable clearance for the lower plate. Key parameters: Motor power: 37 kW Power supply: 400 V / 50 Hz Rated current: 71 A Maximum flow rate: up to 550 m³/h Maximum head: up to 26 m Maximum solid particle size: 60 mm Allowable dry solids content: up to 50% by weight Rotational speed: 960 rpm Motor insulation class: F Maximum medium temperature: 40°C Maximum immersion depth: 20 m Bedpszlz T Hsfx Ahmjln Power cable: 20 m, H07RN-F Direct-on-line (DOL) starting or soft-start/inverter starting is possible. Factory-installed suction basket and agitator. Condition of the equipment – the pump is: new and unused an ex-display unit covered by a 60-day start-up warranty available for immediate sale.