Used Kubota Kx71-4 / 2012 Bj / 4 X Löffel for sale (92,424)

Condition: excellent (used), Year of construction: 2007, operating hours: 5,500 h, functionality: fully functional, turning length: 1,545 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, total height: 2,600 mm, total length: 5,200 mm, total width: 2,550 mm, overall weight: 14,000 kg, Equipment: documentation/manual, Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis 0,001 Degrees 5500 Cutting hours ! The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Ledpfx Asz Ar R Dsgrert Width: 2550mm Height: 2600mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 1,001 km, power: 47 kW (63.90 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 5,600 kg, empty load weight: 5,020 kg, maximum load weight: 580 kg, lifting height: 4,100,000 mm, axle configuration: 4x4, number of seats: 1, first registration: 11/2021, Year of construction: 2021, operating hours: 838 h, driver cabin: other, wheelbase: 2,000 mm, maximum speed: 20 km/h, Equipment: additional headlights, all wheel drive, onboard computer, pallet forks, standard shovel, Vehicle location: Bovenden. Features include: 1 air suspension seat, raised exhaust, differential lock, work lights, and a rotating beacon. Wheelbase: 2000 mm. Water-cooled Kubota 4-cylinder engine, hydrostatic drive, forward/reverse travel speed 0-20 km/h! Bucket discharge height approx. 2465 mm! Maximum lifting height approx. 4100 mm! Overall length approx. 5485 mm! Overall height approx. 2480 mm! Overall width approx. 1725 mm! Approx. 1180 operating hours! Pallet forks available at an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Ljdpsv Nba Sofx Agrjrt

Condition: used, Year of construction: 2005, FANUC 160 I-MB control KNOLL chip conveyor, type 1200 S-2, made in 2012 4 workstations Ljdpjfxgiyefx Agrsrt

Condition: good (used), Year of construction: 2002, operating hours: 1,378 h, Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities Lredpfx Ajz Eg Awogrjt – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Condition: used, Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, total height: 3,250 mm, total length: 3,545 mm, total width: 3,970 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, Equipment: chip conveyor, For sale is a high-precision Hurco VTXU vertical 5-axis machining center with a swivel rotary table. The machine is in very good cosmetic condition. Technical data: Year of manufacture: July 2008 Lsdszvd U Uepfx Agrsrt Control: WinMax (dual-screen) Travel distances X / Y / Z: 800 x 700 x 510 mm Swivel range A-axis (tilting axis): -30° to +110° Rotation range C-axis (rotary table): 360° (full range) Rotary table diameter: 610 mm Table load: max. 400 kg Distance spindle nose - table: 150 - 660 mm Max. spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Tool holder: SK 40 Magazine capacity: 48 tools Max. tool length: 280 mm Max. tool weight: 7 kg Tool change time chip-to-chip: 8 sec. Voltage: 400 V / 50 Hz Connected load: 55 kVA Compressed air requirement: 6 - 8 bar Machine dimensions (W x D x H): 3,545 x 3,970 x 3,250 mm Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, functionality: fully functional, Radial Drilling Machine WRA 40 x 1250 – used For sale: radial drilling machine WRA 40 x 1250 in good working condition. The machine is fully functional, connected to power and available for inspection under power. 🔧 Condition used (not overhauled) fully operational ready for testing Lredpfx Ageyy Rcporjt inspection possible ⚙️ Technical data Drilling capacity steel/cast iron: 40 / 50 mm Arm reach: 250 – 1220 mm Spindle distance: 380 – 1580 mm Spindle stroke: 355 mm Spindle taper: MT4 Speed range: 20 – 2500 rpm Number of speeds: 15 Feed range: 0.063 – 2.5 mm/rev Motor power: 4 kW Machine weight: approx. 3600 kg 🧰 Equipment coolant system 24V lighting drilling table Morse sleeves tools and documentation 📦 Terms price: on request location: Poland loading possible transport can be arranged

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 Lrjdoz Ebzhspfx Agrst WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: good (used), Year of construction: 2011, Due to liquidation, this machine is now available. Condition: very good. Regularly maintained. Immediately available. Hurco VMX24t incl. KITAGAWA rotary table Year of manufacture: 2011 Number of axes: 5 Lrsdpfxszzlqhj Agret X-axis travel: 610 mm Y-axis travel: 510 mm Z-axis travel: 610 mm 24-position tool changer Electric handwheel Internal cooling system Winmax control

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: SN201000003, control type: CNC control, degree of automation: automatic, actuation type: pneumatic, controller model: FANUC Series 16i-LB, laser type: CO₂ laser, laser source manufacturer: FANUC, laser source model: FANUC LASER C4000i-B / C4000i Model B, laser hours: 13,443 h, laser power: 4,000 W, laser wavelength: 106 nm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 300 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 300 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 170 m/min, positioning accuracy: 0.1 mm, input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 19,500 kg, total length: 6,000 mm, total width: 2,500 mm, total height: 2,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, For sale: CNC CO₂ laser ERMAK / ERMAKSAN LASERMAK 4000.3 x 1.5 – 4 kW Used CNC laser cutting machine for sheet metal, ERMAK / ERMAKSAN LASERMAK 4000.3 x 1.5, is for sale. The machine is equipped with a FANUC CO₂ laser source C4000i-B, 4 kW, and a FANUC Series 16i-LB CNC control system. The laser has a working area of approximately 3000 x 1500 mm and is suitable for cutting carbon steel, stainless steel, and aluminum, depending on the material, thickness, gases used, and machine settings. The machine is equipped with the following main peripheral units: Thermotec chiller, Metal Working srl suction/filtration system, Atlas Copco dryer/air preparation system, and Precitec cutting head. It has an exchangeable/movable table for easier loading and unloading of sheet metal. The machine features two loading tables. Main technical data: Manufacturer: ERMAKSAN MAKINA SANAYI TIC. A.S., Turkey Model: LASERMAK 4000.3 x 1.5 Type: CNC CO₂ laser cutting machine Working area: approximately 3100 x 1500 mm Lrjdpfxoziluij Agrst Laser source: FANUC LASER C4000i-B Laser power: 4000 W / 4 kW Max pulse peak power: 5000 W Control: FANUC Series 16i-LB Axes: X-Y-Z-U-V Maximum positioning speed: 170 m/min Power supply: 380 V Electrical consumption: 75–90 kW Dimensions: 5285 x 10480 x 2040 mm Weight: 19,500 kg Cutting head: Precitec Chiller: Thermotec LJ45A35 Suction: Metal Working srl UNIT-POLYGONAL Dryer / air preparation: Atlas Copco CD 25+ Serial number: SN20100003 Laser source production: FANUC, Japan, May 2011 Maximum cutting thicknesses: Carbon steel: up to 20 mm Stainless steel: up to 12 mm Aluminum: up to 8 mm Additional equipment: Thermotec LJ45A35 chiller Metal Working srl suction/filtration system Atlas Copco CD 25+ air preparation/dryer system Precitec cutting head FANUC Series 16i-LB CNC control system FANUC CO₂ laser source C4000i-B Exchangeable/movable table Condition The machine is available and can be inspected on-site. It is sold in its current condition, with all the equipment included. It is suitable for manufacturers of metal products, metal structures, sheet metal components, and companies looking for a powerful CO₂ laser with a large working area. Inspection is possible by prior arrangement.

Year of construction: 1990, condition: excellent (used), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical data: Vertical internal broaching machine in technically very good condition tractive force: 16.000kg clearing speed: up to 27,5 m/min infinitely variable return speed: up to 34 m/min infinitely variable maximum stroke: 1250mm broaching units: 4 pieces accessories: - automatic tool changer - automatic part feeding (part specific) Lodpfx Aslpadyogrort - hydraulic tool clamping device (part specific) Remark: High performance production broaching machine for high volume production with high cutting speed!

Condition: used, Year of construction: 2010, We are offering this used Flow Mach 4 4020b Dynamic XD waterjet cutting system, manufactured in 2010. Manufacturer: Flow Model: Mach 4 4020b Dynamic XD Year of manufacture: 2010 Condition: used Machine type: waterjet cutting system Flow Mach 4 4020b waterjet cutting system | 6,000 bar HyperJet | Dynamic XD | Service 01/2026 Description: For sale is a powerful and recently serviced precision waterjet cutting system from the world market leader FLOW, model Mach 4 4020b. The system is equipped with Flow's high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. A special highlight for buyers: In January 2026, a comprehensive technical service was carried out by the manufacturer (Flow Europe GmbH). This included the installation of an official drive controller retrofit kit. Since original spare controllers for this year of manufacture are often no longer available, this upgrade offers long-term spare parts security and a modernized electronic control system. A test cut was successfully performed after the conversion. Technical data: • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with angular error correction) • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) Ledpezwpfhjfx Agrert • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 HP / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Connection values: 400V, 50Hz, 3 phases (120A full load) Condition & equipment: • Technical condition: Very good, ready for immediate use. • Maintenance history: Current technical service report from the manufacturer is available (January 2026). • Upgrades: New drive controllers (retrofit kit) and refurbished wiring of the C-axis. • Productivity: The 6,000 bar technology enables cuts up to 50% faster compared to standard systems. Scope of delivery: • Waterjet system Flow Mach 4 4020b • High-pressure pump HyperJet 100 • Control terminal including software • Technical acceptance protocol / service report from 01/2026 Location & inspection: 78549 Spaichingen (Germany) An inspection of the system under power is possible by prior arrangement from 15.09.2026. Sales & legal notes: The sale is exclusively in the B2B sector (commercial sale) with exclusion of any liability for defects, guarantee and warranty ("sold as is"). A return, exchange and further negotiations are excluded. All information, data and descriptions are provided to the best of our knowledge, but without guarantee of completeness, accuracy and topicality. The buyer is obliged to inspect the technical data, equipment features and the condition of the system on site before the purchase. Dismantling, loading and transport are carried out entirely by and at the expense of the buyer. If you have any questions or need more information, please send us a message or call us.

Condition: good (used), Technical specifications: Working width: 4050 mm Lrjdpfx Ajwkaalogret Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, mileage: 442,576 km, power: 235 kW (319.51 HP), first registration: 03/2008, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro4, Year of construction: 2007, Equipment: ABS, air conditioning, Phone: call (Contact · Telephone · Mobile · WhatsApp) Special equipment: Driver's seat armrest, wide-angle exterior mirror and electrically adjustable and heated, left side, mechanical battery isolator switch, operating hours counter, kerb mirror right side electrically adjustable and heated, cab: electro-hydraulic tilting mechanism, cab: with 2 rear wall windows, tinted, cab: with air suspension, flame start system, tinted windscreen, catalytic converter, automatic climate control, heated fuel filter, fuel tank: 400 ltr., centre seat, rotating beacon (2), tinted side windows, external sun visor, cab socket 12V and 24V, control module for external data exchange, reinforced front axle shock absorbers, tinted door windows, front underrun protection, viscous fan Lsdpfxewu Rr Te Agrert Additional equipment: Axle configuration: 6x2, front axle load 8.0 t, starting/front mirror, trailer socket 24V / 7-pin, trailer socket ABS, traction control (ASR), exterior mirrors electrically adjustable and heated, wide-angle exterior mirror and electrically adjustable and heated, right side, battery 175 Ah, battery box, rear axle differential lock, EDC engine control, electronic brake system MAN-Brakematic, EURO 4 engine, cab: M (medium length), comfort driver's seat, tachograph, suspension: leaf/air, electric window lifts, 100 A alternator, speed limiter 80 / 85 km/h, rear axle HY-1350, interior filter: pollen filter, body/chassis: chassis, rocker lever - EVB brake, adjustable steering column (steering wheel), air compressor 1-cylinder, engine 10.5 ltr. - 235 kW diesel, trailing axle NO-08, liftable, radio preparation 24V, rear axle disc brake, front axle disc brake, side protection device, front axle stabilizer, bumper in plastic version, rear underrun protection, front axle VOK-08 cranked, electronic immobiliser, central locking system, permissible total weight 26.0 t * VIN: WMAH18ZZX8W105642 * First registration: 04.03.2008 * Net price * All information subject to change without notice

Condition: used, Year of construction: 1969, total height: 2,000 mm, total width: 2,300 mm, total length: 2,000 mm, Colour: Grey Empty weight: 3.800 kg Lodpfoyzhdmex Agrjrt - Year: 1969 - Documentation available: No - CE certificate present: No - Serial number: 9327 - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 420 - Z-axis travel [mm]: 710 - Table length [mm]: 1520 - Table width [mm]: 385 - Tool holder: ISO50 - Main spindle power [kW]: 11 - Min. spindle speed [rpm]: 25 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 2000mm x 2300mm x 2000mm (l x w x h) - Transport weight [kg]: 3800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, power: 22 kW (29.91 HP), Year of construction: 2015, operating hours: 3,329 h, Drive: Track Empty weight: 3.520 kg Ljdpfxezc I Uye Agrert Please contact Emal Jaweed for more information

Condition: used, mileage: 15,000 km, power: 198 kW (269.20 HP), first registration: 09/1995, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, Tel.: call (Contact · Phone · Mobile · WhatsApp) * MAN 18.272 4x2 * Aerial platform - work platform mounted on truck * 15,000 km * Operating hours: 1,465 h * Engine: 6-cylinder inline diesel Lsdpfxoxy Ecns Agrert * Displacement: 6,871 cm³ * Output: 198 kW (270 hp) * Manual transmission * Seating capacity: 3 * Full leaf suspension * Aerial platform with work basket * 4 hydraulic outriggers * Type: DLK 23-12 * Rescue height: 23 m * Rated outreach: 12 m * Ladder length: approx. 30 m (extended) * Crew: 1/2 or 1/8 depending on chassis * Unladen weight: approx. 15,000 – 16,000 kg * Permissible total weight: ~16,000 kg * Basket payload: usually 270 kg * (3 persons + equipment) * Support width: approx. 5.3 m to 5.8 m * Transport height (ready to drive): approx. 3.2 m * Transport length: approx. 10 m * With TÜV (technical inspection) * Year of manufacture: 1995

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 11,688 h, load capacity: 3,000 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: triplex, power: 44 kW (59.82 HP), empty load weight: 4,680 kg, total height: 2,200 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, lighting, trailer coupling, Linde H30D diesel forklift Year of manufacture: 2003 According to the hour meter: 11,688 operating hours Ledpfxszw Dbdj Agrsrt 3-ton lifting capacity 2.2-meter overall height 4.6-meter lifting height 44 kW VW engine - Triple-stage free-lift mast - 3rd and 4th valve for fork carriage - Semi-cabin - Radio and heater - Work lights - Immediately ready for operation - Visually like new! Selling price: €9,500 (net) Affordable delivery also possible!

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 4080 mm Lodpszbugmjfx Agrert Distance between uprights: 3680 mm Press force: 170 tons CNC control: DELEM DA65 Number of controlled axes: 4 Controlled axes: Y1 / Y2; X; R Number of backstops: 4 Stroke: 365 mm Overhang: 410 mm Installation height: 535 mm Working height: 1050 mm Hydraulic tool clamping, top and bottom: WILA Pneumatic die shifting CNC-controlled crowning DSP laser monitoring (new) CE marking Motor power: 37 kW Dimensions (length x width x height): approx. 5650 x 2350 x 3100 mm Weight: approx. 18.5 tons Condition: Overall in good condition, retrofitted in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2026, sheet thickness steel (max.): 4 mm, back gauge: 1,000 mm, CIDAN EVO DUO metal shear is the strongest mechanical shear on the market, with a capacity to handle sheet thicknesses from 0.5 mm to 4.0 mm in the same machine (applies to EVO DUO 32). EVO DUO is a powerful built guillotine shear equipped with two (DUO) gearmotors that distribute power and load optimally. The CIDAN EVO DUO metal shear is available in two lengths, 3200 mm and 4100 mm. The machine is well equipped as standard with a lot of features that creates a perfect working environment that meets the greatest demands on efficiency and ergonomics: Ledpsm Nbq Rsfx Agrsrt Blade gap adjustment Sheet support – supports the material during the cut, as standard designed for return to sender. As option with delivery to the rear side of the machine. Pneumatic hold-down beam that enables gentle handling of softer materials, such as aluminum. The distance from the hold-down beam to the cutting line is less than 35 mm, which minimizes the material waste. Flexible table with T-groove rails for table pans, fixed and adjustable angular stops and support arms that can be rearranged and replaced. EVO DUO guillotine shear can be equipped with a 750 or 1000 mm programmable back gauge with CutLink finger touch control. The back gauge is a fast and accurate positioning system with many interesting functions that facilitate the handling of the sheet metal. CIDAN shear EVO DUO fits well with the CIDAN philosophy of low environmental impact, as the machine has low energy consumption, a very low noise level and is designed for maximum usability.

Condition: used, mileage: 96,558 km, power: 90 kW (122.37 HP), first registration: 02/2012, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x2, empty load weight: 2,580 kg, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, loading space volume: 5 m³, Year of construction: 2012, Equipment: ABS, hydraulics, low noise, Small garbage truck: - Renault - Maxity 120 DXI (SNFF24-35-25) - 96.558Km - EZ: 17.02.2012 - 2488ccm, 4 cylinder diesel engine, 90kw, Euro 5 - Unladen weight: 2,580kg; permissible GG: 3,500kg - High-pressure cleaner with reel, lance and water tank - 5m³ aluminum tipper, Provence Benne PB50 - Manual side and rear flap - 5-speed manual gearbox - 3-seater Ljdpfoqzxflex Agrsrt - el. FH - Rear wall window - 1st hand vehicle You can find a video of this offer on You can find our entire vehicle stock at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, pressing force: 150 t, stroke length: 215 mm, reverse speed: 150 mm/s, table length: 4,100 mm, Equipment: CE marking, safety light barrier, 1 used, High quality fully serviced Bystronic Beyeler 4metre cnc pressbrake for sale Machine Specifications Manufacturer: Bystronic Beyeler Model: PR 150 (Pressure Reference) Year of Manufacture: 2006 Tonnage Capacity: 150 Tons Bending Length: 4100 mm (4 Metres) Lsdpjzpxt Esfx Agrsrt Hydraulic tool clamping CNC Control System: Cybelec Modeva Control Total Axis Configuration: 7-Axis (Back gauge: X, X1, R, Z1, Z2 + Beam: Y1, Y2) Key Features & Maintenance Advanced Crowning: Equipped with a hydraulic crowning system to ensure precise bending accuracy across the entire 4-metre bed length. Complete with tooling package as per photos Civil Work Savings: Free-standing design that requires no pit floor excavation, simplifying installation and relocation. Certified Service History: Fully serviced and maintained directly by Bystronic UK, ensuring optimal operational efficiency and reliability. Condition: High-quality, used, and fully serviced condition.

Condition: used, fuel type: diesel, Year of construction: 2010, operating hours: 7,796 h, Please contact Kristoff Van Havere for more information - Hydraulic quick hitch CW10 Lredpfx Asztuutjgrjt - 2 buckets - Auxiliary piping for hammer and sorting grab

Condition: used, Year of construction: 2022, operating hours: 1,700 h, Equipment: ABS, BOBCAT E60 R2-SERIES – AIR CONDITIONING – 2 BUCKETS – FROM FIRST OWNER – READY FOR USE – 1,700 OPERATING HOURS – VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST * FROM FIRST OWNER VEHICLE EQUIPMENT * TYPE: E60 R2-SERIES * AIR CONDITIONING * 2 BUCKETS * 1,700 OPERATING HOURS * 5,685 KG * 41 KW * IMMEDIATELY READY FOR USE ---- * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2000 * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 – 2000 ----EXPORT REGISTRATION, CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER) – 5 DAYS, 30 DAYS REGISTRATION, AND 17–21 DAYS AUSTRIAN REGISTRATION, EURO 1 VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be charged. Subject to changes, errors, and prior sale! You can find more vehicles on our website: Sales are exclusively based on our general terms and conditions – see our website. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics. Lrjdpfx Agjz Emumsrjt

Condition: used, power: 14 kW (19.03 HP), Year of construction: 2004, operating hours: 1,000 h, Equipment: all wheel drive, * Municipal vehicle * Creep gear * Differential lock on rear axle * Front axle can be switched on * 6-speed Lrsdpfstkb I Usx Agrot ----Construction: 3 cylinder diesel engine, 855 cc/14 KW, 6 forward/2 reverse gears, max. 14 km/h. Rear power lift, rear PTO, PTO speed 540/840/1000 rpm. Accessories: HW 160 Z hay tedder, year of manufacture 2016, weight 95 kg Sale only to traders. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: used, power: 28 kW (38.07 HP), Year of construction: 2017, operating hours: 2,200 h, Equipment: air conditioning, all wheel drive, cabin, front linkage, Kubota STW40 28KW/38HP with air conditioning and mowing equipment---- * Air conditioning * Switchable all-wheel drive * Switchable rear axle differential lock * Hydrostatic transmission * Rear lift * Rear hydraulics * Rear PTO 540 or 800 1/min * Front lift with three-point linkage * Front PTO 1000 1/min * Mid-mounted PTO * Front hydraulics * Control/joystick for front loader * Rotating beacon * Front work lights * Rear work lights * Radio with speakers * Driver's seat with air suspension * Cruise control * Hand throttle * Front fenders made of plastic * Heated rear window * Front windshield wiper with washer system * Mid-mounted mower with side discharge * MATEV collection container with suction and high-dumping function ----Ready-to-use vehicle from first owner, tires in very good condition! For an additional charge, we have the following accessories available to match the tractor: * Front mower * Straight snow blade * Vario Matev SRM VP 160L snow blade * Müthing MUC 120 front-mounted mulcher Lodey U Sfzspfx Agrort * Rauch SA360 rear-mounted spreader Errors and omissions excepted!