Used Light/Heavy Drum Separator for sale (29,195)

Condition: used, Year of construction: 2014, Kersting belt conveyor Ejector Placer Separator GF 2880-510-400 RA2409 Technical data: Conveyor length (NL): 2880 mm frame width (NB): 510 mm belt width (GuB): 400 mm Overall height (BH): 780 mm intake and 640 mm output Supporting feet: includet Conveying speed (v m/s): with Frequency converter for stepless speed change Drive: Drum motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 100 mm parcele size: (max 550) x (390...420) x (max 200) LxWxH Controling and pneumatic included Food-safe with stainless steel design Optionally available: Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Nedewkbfvepfx Agrsdb We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000 with Siemens Sinumerik 810D Cycle Control (Teach-In) The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work. Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors. Working Area Distance between centers: 3,000 mm Swing diameter over bed: 1,200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 min⁻¹ Max. torque: 6,000 Nm Main Drive Drive power: 37 / 52 kW (100% / 60% duty cycle) Feed X-axis feed force: 24,000 N Z-axis feed force: 16,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 4 m/min Tool Holder Turning tool cross-section: 40 × 40 mm Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. current consumption: 200 A Workpiece Weights Ndedpjzdd E Refx Agrob (Manufacturer specifications for standard configuration) Between centers without steady rest: 5,000 kg Between centers with 1 steady rest: 6,000 kg Between centers with 2 steady rests: 7,000 kg Flying in faceplate: 1,800 kg Chip Conveyor 2 x AME Chip Conveyors Manufacturer: AME GmbH, Emsdetten Type: S8 300 Tlg. 63 Year of manufacture: 05/2016 Not Included: Tailstock Steady rests Note The machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Serial number: 990101 Tip width: 3000 - mm Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Ndjdpfx Agjzlqvwsrob Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 47070001, For separating and separating light and impurities Drum diameter x width: 1,400 x 1,200 mm Vibrating feeder Blower with V = 7,000 m³/h Nsdeqi Eh Hepfx Agrodb incl. steel construction, platform, railings, etc.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 13,979 h, machine/vehicle number: A3231E0532, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 4,541 h, laser power: 24,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 60 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 24 kW (2023) High-spec 2D fiber laser cutting machine, one owner from new. 3000 x 1500 mm working area. Siemens Sinumerik 840D SL control with 21.5" multi-touch display. In daily production and under TRUMPF maintenance contract from new. Key data Machine No.: A3231E0532 Year of manufacture: 09/2023 Laser source: TruDisk 24001 (external, separate energy supply) Laser power: 24,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 60 mm / stainless 60 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight: 7,650 kg Supply: 400 V 3~ / 50 Hz, 22.0 kVA, 3 x 63 A Hours: 13,979 h operating / 4,541 h laser-on Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (right). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle cleaning. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Mild steel slats, 67 mm spacing. Slag cart under pallet changer. Cleaning brush. Ndedpfx Aszz Sd Uogrsb Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Automatic nozzle centring. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK 840D SL. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Nanojoints. Oseon Go. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package, gas mix cutting package (N2/O2). Gas Witt gas mixer unit with hardware gas mixer for two gases, plus additional cutting gas connection. Pallet changer / automation Automatic heavy-duty pallet changer in longitudinal direction. LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB interface. RJ45 network interface. Central Link. Remote support. Installation Currently installed on a mezzanine. Mezzanine steel structure not included in the sale. Condition and availability One owner from new, used in daily sheet metal subcontract production in Braintree, Essex. Under TRUMPF maintenance contract from new (two services per year) and still covered - full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available on request. Enquiries Full TRUMPF order confirmation, service history, hours report, cut samples and video of the machine running available on request.

Condition: new, Year of construction: 2026, Screening drum with star discs, separation distance 15mm Medium screening - grain size 0 - 20/25mm Adapter system Lehnhoff MS03 - not included in the price - available upon request Excavators from 4 tons / wheel loaders from 3.5 tons Nodpfjzvfrnjx Agrjdb Cutting width 800 mm / 3 drums Capacity 0.30 m³ Throughput / hour 10.5 - 15 m³/hour Working pressure 200 - 250 bar Oil requirement 50 - 60 l/min - Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil, for example for topsoil in landscaping. - The simultaneous mixing of compost, sand, substrate, etc. with the screening process is easily possible. - Screening of coarse stones from excavation soil - Screening of stones from mixed soil after demolition. - Feeding clumped soil onto a screening system reduces waste and increases throughput. TSE.083 - the bearings are maintenance-free; the chains should be sprayed with chain spray every 20 operating hours via the maintenance flaps. Dimensions and weight without adapter.

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Ndodpochb Sbsfx Agreb Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Condition: used, mileage: 1,800 km, first registration: 04/2020, overall weight: 9,000 kg, axle configuration: 2 axles, These front-mounted sweepers can be operated via the front PTO shaft. Of course, we can also accommodate your specific requirements, special requests, and additional optional equipment. The brush shafts are equipped as standard with alternating plastic and wave wire discs to achieve the best possible sweeping performance, even with heavy and stubborn dirt. ? Dücker FKM 2400 ? With municipal mounting plate receiver ? Implement plate size 3 and 5 ? Very little use, always stored in a shed ? Working width 0°. 2,400 mm ? Working width 15° 2,300 mm ? Working width 30° 2,075 mm ? Sweeper roller diameter: 600 mm ? Hydraulically raise/lower ? Hydraulically swivel right/left ? 2x water tank ? Water spray ? Support wheels ? Support Ndodpfx Ageziudmorjb Manufactured with a stable, torsion-resistant housing with double-walled construction. The sweeping roller is suspended and adjustable in height, with stepless adjustment, and consists of disc brushes in plastic/wave wire, 600 mm Ø, with heavy-duty wheels 250 mm Ø directly attached to the housing. Working width: 2.4 m Overall width: 2.65 m Sweeper roller diameter: 600 mm Lifting device for front quick-change system: Implement plate size 3 or 5, including cylinder Drive, hydraulic, minimum oil flow at 180 bar: 40 l/min Weight: 580 kg Additionally with: Hydraulic tilting of the brush right/left Water spray device in front of the brush Boundary lights LED and warning flags Changeover valve, electric Financing is possible through our partner banks; we will gladly assist you. We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is without guarantee. Subject to change, prior sale, or errors. We strongly recommend and encourage an inspection and examination so that the buyer does not have any false expectations regarding the condition and suitability. Inspections and examinations are possible at any time by prior arrangement and are expressly desired.

Year of construction: 2018, condition: used, functionality: fully functional, This combination oven from the manufacturer Rational is a CombiMaster® with 8 x 1/1 gastronorm trays in an electric version, allowing you to load the unit with deeper GN containers per tray. (It can also be converted to a 10-tray system). This combination oven was primarily used for reheating packaged food and is therefore in very good used condition. The combination oven is from the 2018 model year. The unit has undergone an inspection in our in-house workshop and is fully functional. The base cabinet shown in the picture is not included in the offer but can be purchased as an option. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 seal. The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the cook through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 1042mm Minimum door opening dimensions for transport WxH: 845x1050mm Capacity: 8 x 1/1 GN Power connection: V: 400 / kW: 18.6 / Hz: 50-60 Weight: approx. 143kg Serial number: E11MI18072681444 Year of manufacture: 2018 Condition: used, inspected, fully functional Further information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: Bringing pre-prepared and chilled dishes to serving temperature at the optimal climate. Ndodpfxjzpvbgj Agrjb Automatic separation of fat for clean cooking chamber air. Semi-automatic cleaning program (see photo sequence). 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food item. Ventilated double-glazed door (swivels for easier cleaning). LED cooking chamber lighting. Core temperature measurement by means of a sensor. Cool-down function. High-performance fresh steam generator (automatic flushing and emptying). Hand spray with automatic retraction. Dynamic air circulation. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: excellent (used), For sale: robust WEMAS column milling machine, model FM23. Heavy cast iron construction, very rigid—ideal for toolrooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant system with separate reservoir and pump. Vertical spindle with a precision holder and feed adjustment. Power supply: 3×400 V. The machine is complete, recently serviced, runs smoothly, and is ready for power-on testing. Normal signs of use visible—no excessive play. Included in the price: 3-axis DRO display, scales on X/Y/Z axes, coolant tank and pump, cables, power feed roller, and work light. Additional information from photos: 'WEMAS' and 'FM23' nameplates, spindle adjustment calibration plate, DRO panel with mm/inch, ABS/INC, and calculator functions. Working parameters, spindle taper, and speed ranges to be confirmed onsite—I can measure the table and X/Y/Z travels upon request. Loading by forklift possible. Assistance with transport organization available. Ndsdow I Hzpopfx Agrob

Condition: used, color: orange, Warranty: 24 months Productivity: 100 tph Polygon can produce mobile or fixed asphalt plants with capacities of 60-240 tons/ hour.High quality asphalt plant are produced with experienced staff. Polygon batch Mix Asphalt Plants Advantages Optimum price, high performance Precision weighing and high quality blend High efficiency rotary dryer and burner Easy Maintenance 7-24 after sale support Possibility of asphalt mixing plant spare parts at reasonable prices Operator friendly asphalt plant automation system Easy assembly and disassembly possibility Products suitable for different asphalt production (mastic asphalt, colored asphalt, recycling​ Ndjdpfxex D A N Ts Agrjb Aggregates are typically moved from the stockpiles to the cold feed bin using a front-end loader. Cold feed bins are used to dosage the different aggregates used in the mix to the drying drum. Our Advantages; Thanks to its functional design, it facilitates transportation and installation. Attachments have bolted design. Thanks to its high strength silo casing and twisted body undergoes no change in shape under load. Thanks to the frequency-controlled dosing bands, each material can be supplied in any desired rate. The flame size of the dryer burner can be controlled automatically with the measurement sensor (optional)​ Polygon asphalt plant mixer provides long wear parts life and homogeneous blend. Features; Heavy duty group high quality reducer. Heat and abrasion resistant inner liners Long life arms and paddles Double-valved discharge system Discharge valve with external resistance heating Polygon-asphalt plant filter system separates the gas and dust generated during asphalt production. The decomposed filler dust can be used in mixture if desired. Features; Input and output temperature measurement Clean air valve to protect bags from burns Nomex filter bags with vertical casette Dust-proof design Easy bag changing Reverse air flow bag cleaning system Insulation suitable for climate conditions and heat transfer ​The dust collection system includes supporting feet for easy installation and implementation. The filter dust collection system is perfectly tailored to the mixing plant capacity. The vertical layout-of the filter bags guarantees maximum utilisation of the surface area with efficient filter function. Polygon dryer creates a maximum heat transfer surface thanks to its special wing design. With minimum fuel consumption, it allows the removal of humidity of aggregate and heat it up to the desired temperature. Our Advantages; Dryer rollers and rings are manufactured from long-life forged steel. Easily interchangeable bolt-type compensation springs that distributes body load evenly Suitable for stainless steel insulation coating and heat transfer, rockwool covered body With soft starter support, operation without problem under load Automatically adjustable burner according to humidity and amount of aggregate (optional The drum tube, which is made of a thick-walled, solid steel construc- tion, achieves maximum efficiency, very low exhaust gas temperatures and prevents temperature losses during the...

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 41,622 h, controller model: Siemens Sinumerik 840 D, laser power: 3,000 W, sheet thickness (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale is a TRUMPF TruLaser 5030 fiber (L41) including LiftMaster Compact! The machine will remain powered on until September 23, 2026. Disassembly will be carried out by a certified TRUMPF partner. TECHNICAL DETAILS Laser power: 3,000 W Working area (X / Y / Z): 3,000 × 1,500 × 115 mm Sheet metal thickness steel max.: 15 mm Sheet metal thickness stainless steel max.: 20 mm Sheet metal thickness aluminum max.: 15 mm Simultaneous speed max.: 235 m/min Accuracy: ± 0.1 Sheet metal format max.: 3,000 × 1,500 mm Sheet metal format min.: 1,000 × 1,000 mm Sheet metal thickness max.: 25 mm Sheet metal weight max.: 900 kg Stack height loading side max.: 90 mm Part size min.: 150 × 150 mm Sheet metal thickness max.: 25 mm Sheet metal weight max.: 900 kg Stack height unloading side max.: 250 mm MACHINE DETAILS Control model: Siemens SINUMERIK 840D SL Touch color screen: 17" Operating hours: 81,443 / 76,533 / 41,622 h Ndsdpfxez A S Dzo Agrob Dimensions & Weight Dimensions (L x W x H): 9,373 x 2,964 x 2,383 mm Weight of base machine: 12,700 kg EQUIPMENT LiftMaster Compact 1530 AL21 Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLC) Machine cooling unit water-air Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Solid-state laser TruDisk 3001 with one LLC output Light guide cable according to standard layout Laser cooling unit water-air Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine for height control and sheet metal edge detection Simple workshop programming Extended workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas pressure FastLine USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine enclosure with certified viewing window and door on the right Synchron loader Scrap removal device and double sheet detection Movable removal rake Loading and unloading station Separation of thin sheet metal for synchronous loader Raw material and unpacking station Extended pallet extension on the machine Inventory interface

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Nedeh U Rzgspfx Agredb Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: like new (used), functionality: fully functional, planing width: 430 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, total length of planing tables: 2,900 mm, Equipment: CE marking, SAC FS 430 PLANER | SCM jointer planer with electric table adjustment | 430 MM! 4 TERSA knives! Professional planer from the Italian brand SAC, model FS 430. The machine is designed for precise surfacing and edge planing of wooden components. Its robust, heavy-duty construction and wide 430 mm working table make it ideal for use in both woodworking shops and for the production of furniture, doors, windows, and solid wood elements. Electric table adjustment allows for quick and convenient machine setup changes without the need for manual table lifting. The controls are located on a separate, easy-to-read operator panel. TECHNICAL SPECIFICATIONS: - Manufacturer: SAC - Model: FS 430 - Type: Planer - Planing width: 430 mm - Shaft: 4-knife TERSA - Shaft diameter: approx. 120 mm - Table adjustment: electric - Adjustment control: from the control panel - Table length: 2900 mm - Fence: cast iron, adjustable angle - Shaft guard: YES - Noise reduction combs: YES - Power supply: 400 V Machine testing on-site is possible. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT Njdezx Alkspfx Agrjdb We have the following machines available: band saws, circular saws, crosscut saws and miter saws, thickness planers, jointers, sanders, horizontal and vertical drilling machines, feed systems, sharpeners, four-sided planer, four-sided, three-sided, two-sided, thicknesser, jointer, sander, planer, jointer-planer, planer-thicknesser, jointer-thicknesser, thicknesser-jointer, cleaning machine, mortiser, drilling machine, parquet machine, trimming machine, lathe, milling machine, spindle molder, top spindle, bottom spindle, sanders, wide belt sander, throughfeed sander, roller sander, disc sander, angle sander, jointer, drill, drilling machines, horizontal, radial, milling machine, multi-spindle, edge banding machines, edge bander, veneer machine, press, presses, lathes, band saws, briquetting machines, briquetting machine, chippers, chipper, wood chipper, dowel machine, dowel machines, mortiser, mortising machine, dust extraction, dust collectors, exhaust fan, fans, sharpener, sharpeners, compressor, compressors, honing machines, multi-function

Condition: like new (used), functionality: fully functional, Year of construction: 2023, total length: 14,000 mm, load capacity: 3,200 kg, Equipment: documentation/manual, Top-quality, rarely used KONECRANES CXTS 3.2T lifting system (in operation since 10/2023) in like-new condition. This offer includes the self-supporting steel structure (crane runway) for both longitudinal and transverse movement. The crane can be installed as a stand-alone unit in a space without the need to build a separate crane runway. Key parameters and condition: Ndjdpfjz Eb Emex Agrsb * Load capacity: 3,200 kg * Bridge span: approx. 14 m * Complete set: bridge crane, robust self-supporting structure, power supply, remote control, and complete technical documentation * Year of manufacture: 2023 * Commissioning date: 10/2023 * Condition: rarely used, only light operation in a stone warehouse * Last complete inspection and load test: September 3, 2025

Condition: excellent (used), L-Sealer with Shrink Tunnel For sale is a professional, semi-automatic L-sealer with an integrated shrink tunnel from the quality Italian manufacturer Pactur. It is ideally suited for the fast, professional shrink-wrapping of cardboard boxes, books, bottles, textiles, and other packaged items. The Ladypack 80/SI model is distinguished by its exceptional flexibility and very large sealing frame. It combines the sealing and shrinking processes into a single, compact, mobile unit, saving a significant amount of space on the production floor. Impulse Sealing System: The L-sealer operates using a Teflon-coated sealing wire. It produces clean, extremely strong seals without generating smoke. Efficient Shrink Tunnel: The integrated tunnel features a closed-loop air circulation system with adjustable air deflectors. This ensures perfectly uniform heat distribution and a flawlessly smooth shrink finish—even with complex product shapes. Precise Digital Control: The clear control panel allows for exact adjustment of sealing time, sealing wire cooling time, and tunnel temperature to match the specific film thickness and type (PO, PE, or PVC) being used. Heavy-Duty Conveyor Belt: The tunnel is equipped with a durable, heat-resistant metal mesh conveyor belt. It reliably transports even heavy items (e.g., printed materials, canned goods, or wooden components). Ergonomic Infeed Table: The separate, mobile preparation table allows for quick and easy insertion of products into the center-folded film. The film roll unwinds smoothly on ball bearings. Ideally suited for print shops, logistics centers, laundries, or contract packers for shrink-wrapping: - Cartons and multipacks - Books, catalogs, and stacks of magazines - Textiles and household goods - Bottle packs and cans Technical Specifications & Features: Manufacturer: Pactur (Made in Italy) Model: Ladypack 80 Series Type: L-sealer & shrink tunnel combination Sealing frame dimensions: approx. 560 x 800 mm (for medium to large packages) Control system: Digital control unit for precise adjustment of sealing time and tunnel temperature Nodpjz Dtf Aefx Agrjdb Conveyor: Robust, heat-resistant metal mesh belt in the shrink tunnel Mains voltage: 380 V / 3-phase Max. power consumption: 11.5 kW Mobility: Entire system and the separate infeed table are mounted on sturdy swivel casters Max. film roll width: 700 mm Max. film roll diameter: Ø 250 mm External dimensions (length x width x height): approx. 1,800 mm x 2,000 mm x 1,120 mm Max. product height: approx. 150 mm (determined by the tunnel opening height) Net weight: approx. 400 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Nsdpfx Ajxx Tigogrjdb Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Year of construction: 2026, operating hours: 20 h, condition: like new (used), functionality: fully functional, PE30 Commercial Chocolate Enrobing & Cooling Line – 30kg Tank – 2.7m Cooling Tunnel – Almost New We are selling our complete PE30 chocolate enrobing and cooling line following the closure of our recently launched protein bar production facility in London. The equipment was purchased new specifically for our own production and only went into operation around March 2026. Since then, approximately 25,000 chocolate-coated protein bars have passed through the line, so it has had relatively light commercial use and remains in excellent condition. The equipment is being sold solely due to the closure of our production facility for business and financial reasons – not because of any fault with the machinery. Complete system includes: PE30 chocolate melting & enrobing machine 30kg chocolate melting/holding tank Chocolate enrobing section with stainless-steel mesh conveyor Custom-made acrylic enclosure/cover for improved temperature stability around the chocolate 2.7m refrigerated cooling tunnel Food-grade PU cooling conveyor Copeland compressor External ventilation/extraction fan Associated components supplied with the system The custom acrylic cover was purchased separately and designed specifically for our machine to help maintain a more controlled temperature around the chocolate during enrobing. It is included in the sale. PE30 specifications Manufacturer: Anhui Dixin Machinery Technology Co., Ltd. Model: PE30 Capacity: 30kg Power: 220V / 1 Phase / 50Hz, 1.8kW Material: SUS304 stainless steel Working speed: 2m/min Mesh: 200 × 1000mm Belt: 200 × 1200mm Dimensions: approx. 1230 × 850 × 1450mm 2.7m cooling tunnel SUS304 stainless steel Food-grade PU belt Nsdpfx Aszx D Dbegrjdb 200mm × 2700mm belt 220V / 1 Phase / 50Hz 2.8kW Copeland 2HP compressor Temperature capability down to approx. -15°C Dimensions: approx. 2800 × 850 × 1380mm Weight: approx. 220kg These technical specifications are taken from the original manufacturer's documentation. The system also includes a ventilation fan intended to be installed/vented outside the production area. We used the line for premium chocolate-coated protein bars, but it can also be suitable for energy/nutrition bars, confectionery, biscuits, bakery products and other chocolate-coated products. The manufacturer also specifies the cooling tunnel for a range of food applications. The machine is currently located in Wimbledon, London, UK. Inspection can be arranged, and videos of the equipment operating can be provided to serious buyers. We are also selling other equipment from our protein bar production facility, including protein bar extrusion/forming machinery, chocolate processing equipment, flow-wrapping machines, mixers and stainless-steel production equipment. Machines can be purchased individually or as part of a complete protein/energy bar production line. Collection from Wimbledon, London. Buyer to arrange suitable transport and installation unless otherwise agreed.

Condition: excellent (used), Year of construction: 2018, The SEPAmatic 3000 C is a machine from the SEPAmatic brand (Modernpack Hoppe GmbH), designed to separate meat from unwanted components such as bone, skin, gristle, or bone splinters. The separator uses a belt-type separation system, well suited to processing a variety of meat and fish raw materials. How does the SEPAmatic 3000 C separator work? Raw material is drawn in between a highly elastic crushing belt and a perforated stainless steel drum, where it undergoes compression and separation. Harder components such as bone and gristle stay on the outer surface of the drum, while soft meat is pressed through the perforations, enabling continuous, precise separation of the desired raw material from unwanted parts. A simple control system, without complicated electronics or electro-hydraulics, ensures reproducible machine settings and stable operation, while quick access to the working components makes routine servicing and maintenance easier. Key advantages of the SEPAmatic 3000 C The SEPAmatic 3000 C stands out for its simple, reliable construction, in which machine settings remain stable despite wear on the working parts. Interchangeable crushing belts — available in a heavy-duty polyurethane version or a lower-cost neoprene version — allow the machine to be matched to the type of raw material processed and to operating budget. The unit on offer is fitted with a 4 mm sieve, and the set additionally includes two 3 mm sieves and two 4 mm sieves, allowing the separation grade to be easily adjusted depending on the recipe. New belts, ready for immediate replacement, are also included with the machine. Ndedoztwuispfx Agreb Technical specifications of the SEPAmatic 3000 C Manufacturer: SEPAmatic (Modernpack Hoppe GmbH) Type: 3000 C Machine number: 197556 Power: 15 kW Power supply: 400 V, 50 Hz Rated current: 30 A Control voltage: 24 V Sieve: 4 mm mesh (set additionally includes 2 x 3 mm and 2 x 4 mm) Belts: new belts included Dimensions (L x W x H): 2650 x 2000 x 2200 mm Application of the SEPAmatic 3000 C separator The SEPAmatic 3000 C is used in meat and fish processing plants, wherever effective separation of meat from bone, skin, gristle, or bone splinters is required. The machine performs well for recovering meat from post-slaughter components for the production of fillings, sausages, and other processed products.

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. Nodpfx Aox Da D Usgrjdb If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: DC55-031, feed length X-axis: 1,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, mount diameter: 175 mm, position of the milling head: 150 Achse Y, type of input current: three-phase, rotational speed (max.): 6,000 rpm, overall weight: 15,000 kg, table load: 1,000 kg, input voltage: 400 V, space requirement width: 4,000 mm, space requirement length: 6,000 mm, space requirement height: 3,000 mm, year of last overhaul: 2025, workpiece weight (max.): 1,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machines are equipped with spindle speeds of 0-6000 rpm and SK 50 spindles. The first gear stage, 0-1000 rpm, can be switched to a lower gear ratio, providing very high drive power even in the low speed range, suitable for heavy machining. The pallet changer handles 2 pallets; a total of 8 pallets are available and compatible with both machines. The tool changer has 40 positions. Additional equipment: Internal cooling system Chip conveyor Paper band filter system Separate oil cooler Various tool holders 1x Double angle plate 800 x 800 mm, manufacturer Kelch 3x Double angle plate 800 x 600 mm, manufacturer Kelch Ndsdpfx Ajz D Tp Ujgrsb 4x NC vise Almatic Type NC 200 with 2 base plates (can be assembled as a clamping tower) Optionally, a second machine of the same type is available. Disassembly of the machine is possible after costs have been covered, with self-disassembly preferred.

Year of construction: 2026, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. Ndede Snd Njpfx Agreb At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Ndsdpfxsrt Uvzo Agrsb Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Availability: short notice Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Miscellaneous: Very good used condition, fully operational

Condition: used, Year of construction: 2018, operating hours: 7,293 h, total height: 9,500 mm, total length: 34,500 mm, total width: 14,550 mm, Production year: 2018 Model: 10HM Drake Number of operating hours: 7293 h Ndjdpfx Agszmul Eorob Minimum space requirements: 34500mm x 14550mm x 9500mm Electric motor power (Siemens): 550 kW Working shaft width: 1000 mm Configuration: 10 hammers, 3-2-3-2 arrangement (weight per hammer: 105-117 kg) Capacity: 14 tons/hour Magnetic separator (steel) – 2 units Eddy current separator (non-ferrous metals) Drum screen Spare parts: Flap, 3 sets of hammers, pins, conveyor belts, sensors, 6 screens, gearboxes If you have any questions or require further information, please send a message or contact us by phone.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2013, total length: 2,868 mm, total height: 2,102 mm, total width: 1,960 mm, overall weight: 2,200 kg, Hello, we are selling several 3D printers from an insolvency estate. All are professional-grade devices from the automotive development and design sector. This listing features the Stratasys Objet 1000 / J4100 from 2013. The printer underwent a mechanical overhaul by Stratasys in 2025 and was updated to the latest standards electronically and in terms of software. This upgrade cost approximately EUR 135,000. Accessories such as a replacement print bed with a mobile lifting frame and various spare parts are included. Consumables can be purchased additionally at a favorable price. This is a stereolithography printer, meaning liquid resin is cured using UV/laser technology, creating the component layer by layer with extremely high detail, precision, and excellent surface quality. Thus, it is an absolute professional-grade device that can, for example, print multi-colored automotive lights with a clear glass appearance. A new device in this print volume size currently costs well over EUR 350,000 (net). Technical data: Build volume/build size max: 1,000 × 800 × 500 mm Layer thickness up to 27 microns High speed: up to 3 base resins, 27 µm resolution Super high speed: 1 base resin, 55 µm resolution PolyJet UV technology 110–240 V Ndjdpfx Agsz Ahq Tjreb Dimensions: 2,870 x 1,960 x 2,105 mm Weight: 2,200 kg The price is ex works; we can arrange loading. We also offer worldwide shipping and the necessary customs documents, for an additional fee. The device can be inspected at our warehouse. Price includes VAT; invoice with VAT shown separately. !! Sale only to business customers, without warranty, no guarantee, no exchange, sold as is. Further description from the manufacturer: Create large or small production tools and full-size prototypes. Maximize your productivity and achieve a quick ROI with the Stratasys J4100™ 3D printer. Its multi-material capability, high throughput, and extra-large build platform enable faster, smarter, and more precise workflows. Thanks to PolyJet Technology™, this powerful system enables engineers, manufacturers, and designers to 3D print any design – no matter how complex or detailed. The size of the parts is irrelevant: the J4100 prints both large and small prototypes with equal precision. Print large parts with a length of over a meter in a single print job. This eliminates the need to split large CAD files and later assemble the parts. Print many parts in a single print job and benefit from competitive unit costs. The reliable and user-friendly J4100 enables you to produce parts that are ready for use with minimal or no post-processing. The support material can be quickly removed with a water jet, and for most applications, the smooth, multi-material parts do not require polishing or painting.