Used Lut Screening Machine Lut 13/21-1 for sale (114,634)

Year of construction: 2018, condition: excellent (used), For machining aluminium and steel profiles Fully functional, in very good condition Machining length: 7200mm 3-axis control with 15" screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimal quantity lubrication Central lubrication Thread cutting without compensating chuck Simple programming at the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Nodpfx Agozzw Ederjwl Z-axis [mm]: up to 340 / 260 Rapid traverse speed X/Y/Z axis [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Nwodpfx Agezav D Dorjl Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, overall weight: 2,120 kg, sheet thickness steel (max.): 13 mm, total width: 1,200 mm, total length: 4,500 mm, total height: 2,000 mm, sheet thickness (max.): 13 mm, throat depth: 2,700 mm, workpiece weight (max.): 2,000 kg, space requirement height: 2,300 mm, space requirement length: 4,800 mm, input voltage: 400 V, Refurbished Pullmax Kumla F13C edge rolling,flanging machine in excellent condition for sale. Nodpfjy Tni Tex Agrjwl Can edge roll, flange dished ends from mild steel sheets up to 13 mm thick and stainless steel sheets up to 10 mm thick!

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 2132 5x, functionality: fully functional, operating hours: 150 h, number of slots in tool magazine: 12, total length: 3,200 mm, total width: 2,070 mm, overall weight: 10,000 kg, For sale: AES Ultra Raptor 2132 – 5-axis CNC machining center We are selling an AES Ultra Raptor 2132 CNC machining center, a top-of-the-line machine for processing wood, MDF, particleboard, compact panels, and other panel materials. Features: ✔ 5-axis machining ✔ Working area: 3000 x 2100 mm ✔ Automatic tool changer ✔ Nesting table with vacuum clamping ✔ High precision and productivity ✔ Suitable for the production of furniture, stairs, doors, kitchens, and other custom-made products The machine is in excellent condition and ready for operation. Price: €75,000 + VAT Nedezzzbcspfx Agrjwl For more information, photos, or to arrange a machine inspection, please contact us.

Condition: ready for operation (used), Year of construction: 2005, clamping force: 2,100 kN, screw diameter: 55 mm, overall weight: 9,200 kg, Hydraulic injection moulding machine manufactured in 2005. This Battenfeld TM 210/1330 has a weight of 9200 kg and operates with a hydraulic system pressure of 210 bar. It features a rated motor current of 68 A and a supply system of 3-phase with neutral. If you are looking to get high-quality injection moulding capabilities, consider the Battenfeld TM 210/1330 machine we have for sale. Contact us for further details. • Hydraulic system pressure: 210 bar • Rated motor current: 68 A • Control voltage: 230 V • Frequency: 50 Hz • Supply system: 3~N (3-phase + Neutral) Nodpfxoy Em D Te Agrowl • Rated voltage: 230 / 400 V • Rated current (1st supply): 120 A • Rated current (2nd supply): 97 A • Max. fuse protection (gL): 125 A • Screw SIze: 55mm

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Njdpfxoq U R T Ne Agrowl Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: repair required (used), Manufacturer: Thieme Model: 3020 L Table size: 100 x 130 cm Nwjdpfox H Rybox Agrjl Electrical inspection required!

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1393, arm reach: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! Includes notebook and PCdemis 2016 software! TECHNICAL DETAILS FP2 Mobility Pack: included Measuring software: PCdemis (2016) Notebook: DELL M 6800 with a 17-inch screen and Windows 10 Tripod: Brunson heavy-duty rolling tripod, type 230 FIX Measuring range: 2,500 mm Accuracy class: 5 Number of axes: 6 Target single-point deviation: 0.020 mm Target volumetric accuracy: ±0.029 mm Arm weight: 8 kg Probe set: Probe with ruby ball 3mm, 6mm and with steel ball 15mm EQUIPMENT - Carbon fiber double-tube construction enables separation of stability and measurement - AbsoluteArm series can start measuring directly without referencing - Probing system with automatic probe recognition - Mounting plate with magnet Nwjdpfx Agszrd R Uorjl - FP2 Mobility Pack - Transport case - Magnetic tripod - Test bar L = 700 mm - Test sphere D = 25 mm - Power supply with connecting cable - USB cable measuring arm - notebook - Dust cover - New pressure cylinder installed - Relabeling of the measuring arm before calibration 2023 - ISO 10360 acceptance with certificate 2023 is included Shipping conditions - Ex works, without additional packaging (measuring arm in case and notebook in protective cover) and Brunson rolling tripod – i.e. 3 parts - If the buyer arranges collection via a shipping company, the seller recommends special packaging (approx. 160 x 70 x 70 cm cardboard box on a pallet, with bubble wrap inside) and a Euro pallet (Brunson rolling tripod) at a price of €250, secured with strapping to the pallet.

Condition: used, Year of construction: 2003, cutting capacity: 400 mm Nwodpfx Ajz Eaiwegrjl automatic clamping vise automatic machine

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 2,100 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 100 mm, spindle speed (max.): 50,000 rpm, spindle motor power: 3,600 W, number of axes: 3, This 3-axis DELTA LGT2113 PRO gantry milling machine was manufactured in 2016. It features a working area of 2100 mm in the X-axis and 1300 mm in the Y-axis, equipped with a powerful 3.6 kW spindle capable of reaching 50,000 rpm. The machine includes a 12-position automatic tool changer and a 4-zone vacuum table, making it suitable for various milling and specialized cutting applications. If you are looking to get high-quality milling capabilities, consider the DELTA LGT2113 PRO machine we have for sale. Contact us for further details. • Tool taper: HSK 25 • Number of tool slots: 12-position automatic tool changer. • Main electronic connection: 380 V, 50/60 Hz • Pump drive power: 5.5 kW each • Gantry-type CNC milling machine • Italian-made machine • 4-zone vacuum table • Designed for specialized industrial applications, especially for the production of tooling used in the printing industry • Also suited for a wide range of general milling operations • X and Y axes: Rack and pinion drive • Z axis: Ball screw drive Nedpfxezk Ipxo Agrowl • Automatic centralized lubrication system • Liquid-cooled spindle • The spindle was completely overhauled a few months ago, including bearing replacement, and is currently in excellent working condition • Integrated Blum tool measurement system with optical transmitter/receiver (probe not included) • 2 vacuum pumps • Capacity: 250 m³/h each • Power supply for vacuum system: 230/400 V, 50 Hz • Windows 10 operating system • Proprietary 2.5D control software • Deltacam CAM software • 17” TFT display • Dust extraction system (vacuum cleaner not included) • Oscillating knife head for precise cutting of rubber, foam and similar materials, allowing the machine to perform both milling and specialized cutting applications • Minimum Quantity Lubrication (MQL) system for improved machining performance and extended tool life • The machine is currently under power and can be inspected in operation • It is no longer fully utilized, which is the reason for its sale • The machine is in good technical condition and the recently refurbished spindle is operating flawlessly

Year of construction: 2024, operating hours: 20 h, condition: new, functionality: fully functional, machine/vehicle number: 4729, Condition: like new, only approximately 20 operating hours Delivery: June 2024 Original purchase price: €98,000 Includes ultrasonic screen cleaning system for a mesh size of 0.090 mm Screen area: 5.3 m² Screen diameter: approx. 2,600 mm Overall height: approx. 1,964 mm Nwjdpfoz Etwnox Agrsl Installation dimensions according to drawing: approx. 1,950 × 1,950 mm Nominal speed of the screen body: 225 rpm Motor power: 5.5 kW Power supply: 400 V, 50 Hz Maximum product temperature: 80 °C Maximum permissible negative pressure: -5 mbar Static empty weight: approx. 2.77 t

Condition: good (used), Year of construction: 2014, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: P14ZYG488, Year 2014 with Fanuc series 31i Model B5 X/Y/Z: 500 x 400 x 330 mm 21-tool magazine with 4th axis TECHNICAL SPECIFICATIONS Table dimensions: 650 x 400 mm Maximum table load: 300 kg T-slots (3 slots, distance 125 mm): 14 mm X/Y/Z travels: 500 / 400 / 330 mm Table – spindle nose distance: 250 – 580 mm (with 100mm riser) Spindle axis – Z-axis guide distance: 380 mm Table height: 735 mm SPINDLE Spindle nose: 55 mm ISO 30 Spindle speed (standard): 100 to 10000 min-1 (opt. 24000 min-1) Acceleration time from 0 to 15000 min-1: 0.46 sec Time for reversal at 4000 min-1: 0.40 sec Maximum spindle torque (-1700 min-1): 78 Nm Continuous power: 3.7 kW (2800 – 8000 min-1) Power for 1 minute ED: 13 kW (1700-3500 min-1) Drilling capacity in steel: Ø 20 mm Milling capacity in steel: 70 cm3/min Tapping capacity in steel: M 12 Z-AXIS Ball bearing guide Nwodpjzzxk Ujfx Agrel Cutting feed (AC servomotor 1.0 kW / Nm): 1 to 30000 mm/min Rapid traverse in X, Y, and Z: 54 m/min Rapid traverse: more than 1.5G TOOL MAGAZINE Tool type: ISO 30 according to DIN 69871A or BT30 Number of tools: 21 Tool change time: 0.8 sec. 2kg / 1.2 sec. 3 kg Chip-to-chip tool change time: 1.4 sec. Maximum tool diameter: 80 mm for maximum tool length 250mm Maximum tool weight: 2kg / 3kg at reduced speed Maximum weight of the 21 tools: 22 kg or 33 kg MACHINE TABLE / X-Y AXES Ball bearing guides New high-speed Fanuc alpha i motors AC servomotor 8i 2.5kW, 8Nm Rapid traverse in X and Y: 54 m/min on 30 mm Cutting feed: 1 – 30'000 mm/min Minimum input/output increment: 0.001 mm Positioning accuracy in X/Y/Z axis: ±0.002 mm FANUC 31i-B5 NUMERICAL CONTROL: 3 axes (option for 4th and 5th axis) Simultaneous linear interpolation up to 5 axes Work time per block: 15 sec. Memory capacity: 200 programs (512 KB) RS 232C and USB interface, Ethernet interface Flashrom card reader with editing functions Manual Guide i with assistance CONNECTION Voltage: (3 phases) 400V ±5% Frequency: 50Hz ±1 Hz Nominal power: 20 kVA Compressed air: 5 bar minimum, 0.13 m3/min Fuse: 34 A min The technical details provided are given without guarantee, subject to error or omission.

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibrating and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finishing sander Ideal sanding machine for interior design companies, also suitable for intermediate sanding of lacquered surfaces. Edge banding machine with combination unit and electronic articulated pressure bar, edge segments can be switched on and off. Segment width of the pressure bar: 35 mm Contact roller can be pneumatically adjusted, low wear due to ribbed steel roller Grain size compensation Drive motor 7.5 kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed speed can be steplessly adjusted via frequency inverter from 2.5 - 13 m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the discharge end Constant working height of 900 mm by adjusting the upper part of the machine, thus can also be integrated into sanding lines. Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm Workpiece height approx. 3 to 150 mm Common sanding belt dimension: 1360 x 1900 mm 3 rubberized pressure rollers Infeed roller table and foldable discharge table Preparation for vacuum blower. The carpet is perforated and connectors for an optional blower are available. Alternatively, the carpet can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm, and 2 x 100 mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar setting points at the front and rear, as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibrating roller. CE marking Operating manual Without the illustrated connection cable Nedpozqvmrsfx Agrswl Original paint, only retouched in some areas Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this provider".

Year of construction: 2015, condition: ready for operation (used), A Costa Levigatrici wide belt sanding and deburring machine is available. Working width: 1350mm, sanding units: 2, abrasive belt dimensions X/Y: 1380mm/2620mm, working height: 920mm, contact roller width: 1350mm, contact roller diameter: 200mm, roller hardness 1/2: 35Shore/80Shore, max. abrasive belt speed: 18m/s, machine dimensions X/Y/Z: approx. 2050mm/1900mm/2350mm, weight: approx. 2800kg. Documentation available. An on-site inspection is possible. Nwjdpfx Aozlkaijgrjl

Condition: ready for operation (used), * Brand: Haver & Böcker Nedpeywnfvefx Agrjwl * Dim. screen: 4000 x 1500 mm – 2 decks * Incl.: E-motor and springs.

Condition: refurbished (used), Bezner screening machine | roller screen type BSM 50-1x2/4,75 reconditioned | refurbished with new bearings (roller bearings), new vibrating elements and a refurbished screen box Make: Bezner Type: BSM 50-1x2/4.75 Screening capacity: up to approx. 60–70 srm/h (for wood chips and sawdust) Screening area: 4.75 m² per screen mesh size Screen decks: 2 Fractions: 3 Screen mesh size: - 1st screen deck: punched perforated sheet metal screen, D = 40 mm - 2nd screen deck: punched perforated sheet metal screen, D = 10 mm or as agreed Drive power: 4.0 kW, 3 x 400 V, 50 Hz Screen box height: 700 mm L x W x H: 5,600 x 2,300 x 2,050 mm Nwsdpfx Asz Drr Iogrsl Machine weight: approx. 4,800 kg Machine colour: RAL 6011 Reseda green Screen inserts freely selectable Outlet design according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: like new (used), Year of construction: 2020, Donau Flex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Type: Flex 135 High-Speed Radial Drilling Machine Condition: used, very good to like new Year of manufacture: 2020 Stepless speed control Stepless quill feed Threading device Dimensions and travel ranges Tool holder: MK 4 Column diameter mm: 170 Table dimensions mm: 1200 x 600 Number of T-slots: 4 Distance between T-slots mm: 125 Quill stroke mm: 165 Column stroke mm: 450 Drilling capacity in solid steel 60 mm: 35 Cast iron 22 mm: 42 Threading steel 60 M 30 Cast iron 22 M 36 AC motor, frequency-controlled kW 4.0 at 100% duty cycle. Speed range: min-1 20 – 3200 Feed, stepless mm/rev: 0.02 – 0.7 Nwjdpfxjzza Nxj Agrol Machine light Spindle guard

Condition: excellent (used), Year of construction: 2005, BATTENFELD HM 270/1330 INJECTION MOLDING MACHINE Year of manufacture: 2005 Clamping unit Clamping force: 2700 kN Dimensions of mounting plates: 1030 × 1020 mm Distance between columns: 710 × 630 mm Minimum mold height: 350 mm Maximum mold opening: 1150 mm Diameter of centering ring: 160 mm Maximum ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Injection volume: 650 cm³ Injection weight (PS): 565 g Injection pressure: 2040 bar Maximum injection speed: 144 mm/s Additional equipment 1 × pneumatic valve 3 × hydraulic cores Nsdpfx Agsziugujrjwl Dimensions and weight Machine length: approx. 6,200 mm Machine width: approx. 1,800 mm Machine height: approx. 2,300 mm Machine weight: approx. 12,500 kg The machine is available for inspection by prior appointment. PIMM Machinery

Condition: refurbished (used), functionality: fully functional, Equipment: documentation/manual, Hello, we are offering a Thieme TSC 130 squeegee cutting machine that has been completely overhauled in our workshop. It is suitable for a maximum squeegee length of 1300 mm. Nodozyc T Repfx Agrewl In this system, the squeegee blade is trimmed thinly using a very fast-rotating special knife under a water/alcohol mixture. This is necessary if the squeegee blade has not been installed perfectly flat or if the edge of the squeegee blade is damaged and no longer prints cleanly. The advantage of cutting compared to squeegee grinding is: the rubber does not get hot and melt. You always get the same, defined edge, and virtually anyone can do it. The system is suitable for classic screen printing squeegee blades. It is not suitable for RKS squeegee blades or carbon squeegees. The system is currently located in our warehouse/workshop in 93476 Blaibach. We would be happy to take care of transport, etc. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2008, Here are some key details: - CNC universal cylindrical grinding machine WUG 21 base machine by CNC-Technik Weiss. (The WUG 21 features a Karstens machine bed on which the CNC system is mounted.) - Year of manufacture: 2008 / operated in single-shift use only - 1000 mm between centers - Workpiece spindle headstock and tailstock MK4 - Wheel diameter up to 500 mm - Wheel mounting at a 26.5° angle - Grinding wheel drive with programmable SUG - Grinding spindle headstock manually swivellable on air cushion - Wheel positioned on the right - Internal grinding attachment mounted at the rear, including dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding: yes - Automatic dressing - Marposs acoustic emission monitoring for external grinding wheel, including software package Njdpfx Aoxmurxjgrewl - Grinding wheel spindle and workpiece spindle driven by V-belt drive

Condition: used, 5-way combination profile steel shear, PEDDINGHAUS Type 210 AD/13 Machine No. 529A059, Year of manufacture approx. 1970 Punching unit: Punching force 60 tons Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal Overhang 365 mm Round bar shear: Cutting capacity, round 42 mm Square 38 x 38 mm Flat bar shear: Cutting capacity at shear angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shear: Shearing capacity, angle iron at 90° 110 x 10 mm Shearing capacity, angle iron at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notching up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz - Center-finding device via hand lever and centering device - Mechanical stroke release via hand lever - Flat bar shear equipped with 2° blade - Mechanical clamp on the profile steel shear, round bar shear and on the flat bar shear Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg Good condition Nwjdpfx Agoi Duh Ijrsl

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 5 h, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 32 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 200 mm, number of slots in tool magazine: 12, controller manufacturer: Syntec, actuation type: electric, total height: 2,500 mm, total length: 10,000 mm, total width: 2,400 mm, overall weight: 4,000 kg, Equipment: CE marking, documentation/manual, ELECNC2130ATC Nesting Machine #Working sizes 2100x3000x200mm #Italy original import HSD ES951 Newest ATC air cooling spindle, 24000RPM #Italy HSD brand 9 vertical drilling unit #With laser head #11kw Taiwan Delta inverter #Taiwan Syntec 60WE control system #850W Japan Yaskawa servo motor and 1000W servo drivers #Japan Shimpo reducer,higher precision, more stable #Full Vacuum working table #2x7.5kw Tongyou air vacuum pump #5.5kw double bags dust collector #Taiwan PMI/ABBA linear guide, 25mm #1.5L Auto lubrication system #Linear tool changers, 12 tool changers under the gantry #12 pieces ISO30 tool holder #With pop up pins #Auto tool calibration  #With auto loading and unloading platform #With one tool box for spare parts #380V,3ph, 50hz Available for test in Tarnowo Podgorne, Poland. Have altogether 5 pcs for sale. After purchase we were not able to use them due to regulation and legal issues in our facility. Nedpszxqz Hsfx Agrswl 32 kW is for the whole set: autoloader, CNC with air pumps and auto unloader

Condition: used, Technical data: Working width: 1100 mm 1 Calibrating unit Roller diameter: 160 mm 2 Combination units Roller diameter: 160 mm Workpiece height: 160 mm Sanding belt dimensions: 2200x1130 mm Extraction port diameter: 2x140 mm Electric lifting Digital display Emergency stop switch Nwedpfxjyv Arzo Agrjl Total power: 13 kW Voltage: 380 V Overall dimensions: Length: 1900 mm Width: 1800 mm Height: 2400 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 Nodpfx Asyacu Negrewl - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 61198 [h] - Number of spindle hours : 18592 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : FMB Minimag20/3200 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE Nwedpfx Agjyacvtsrsl - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 46739 [h] - Number of spindle hours : 16560 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : TORNOS SBF326-3.2M - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer