Used Maxion , Pillar Drill, - Semi-Automatic for sale (30,151)

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 313026, saw blade diameter: 450 mm, total length: 10,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 2,000 kg, KALTENBACH SKL 450 H Semi-automatic Cold Circular Saw - Operating voltage: 3 x 400 V - Frequency: 50 Hz - incl. roller conveyors Attention: The item must be collected on a binding date between 07 and 09 July 2026, to be agreed upon. Ncsdpfsy Dcr Dsx Akujt FCA D-71263 Weil der Stadt – loaded onto truck

Condition: new, Year of construction: 2026, The BS370H is a powerful and reliable semi-automatic band saw with miter cuts from -45° to +60° and a hydraulically controlled vice and saw arm. The machine is irreplaceable in every locksmith's workshop and is ideal for cutting pipes, profiles and solid materials. The belt guides are equipped with special carbide plates and bearings. This has a huge impact on belt guidance, belt life, straightness, accuracy and cut quality. The carbide guide greatly reduces machine and saw blade wear. The machine is equipped with an efficient cooling pump with a closed coolant circuit. The drive of the machine is transmitted via a worm gear. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The cutter is equipped with a strain gauge - a tape tension sensor and an automatic switch-off in the event of the cutting tape breaking. The shape of the upper part of the base is a tub for draining the coolant and catching chips formed during the cutting of the material. A cast iron work table with a swivel arm and a control panel on a separate arm is attached to the base. In the cutting process, the main cutting movement is the moving of the cutting band and the arm's lowering feed. The speed of the arm's descent (cutting speed) is regulated by a hydraulic cylinder. Cutter for precise, professional work. Torsion-resistant, rigid ductile iron arm and saw body. Double sided quick lock vice In semi-automatic mode, after pressing START, the hydraulic vise will clamp the material, the hydraulics will lower the saw arm, the limit switch will give the signal to finish cutting and the hydraulics will raise the saw arm. Technical parameters Size of the cutting band 3160 x 27 x 0.9 mm Belt tension mechanical (manual) Belt speeds 34.68 m / min Arm Drop Adjustment stepless - hydraulic cylinder Height of vice base 890 mm Diameter of saw wheel 380 mm Power 3phase, 400V Nsdpfeycqhcsx Akuoct Main engine power S1- 1,5/S6 -1,9kW Cooling pump motor power 46W Dimensions with base 1850x950x1500 (2050) mm Weight 491 kg

Condition: good (used), bore capacity in steel (diameter) 32 mm throat 310 mm bore stroke 175 mm spindle taper MT MK3 table-size 570 x 475 mm spindle turning speed - stepless 60 - 1600 U/min voltage 400 V column diameter Ø145 mm quill feed 0,1-0,16-0,25 mm/U Ncsdsy Aytispfx Akust total power requirement 1,1/1,8 kW weight of the machine ca. 450 kg dimensions of the machine ca. 0,70 x 1,10 x 2,10 m - Serial-No.: 121950 - Stepless speed control - Automatic vertical feed - Built-in machine light

Condition: used, tool diameter: 25 mm, drilling depth: 180 mm, actuation type: manual, rotational speed (max.): 1,510 rpm, table width: 390 mm, table length: 2,080 mm, Brand: Erlo Model: TC-25 (3 units) Transmission: Gear-driven Feed: Manual Capacity: 25 mm Drilling depth: 180 mm Morse taper: 3 Speeds: 8 (96 - 1510 rpm) Coolant system. Table dimensions: 2080x390 mm Minimum distance from drill chuck to table: 300 mm Nsdpfxoy Av Ebe Akujct Maximum distance from drill chuck to table: 700 mm Drill with manual elevation. Drill elevation travel: 400 mm

Year of construction: 2020, condition: new, New - Soco Carton / Box Erector Model F-100-5 Never installed Nodpjyvutwjfx Akuect Qty 2 available

Condition: used, bore capacity in steel (diameter) 40 mm threading bis M 30 throat 330 mm bore stroke 180 mm 4 speeds 60 - 765 U/min table-size 720 x 360 mm total power requirement 2,6 / 3,2 kW weight 350 kg dimensions 720 x 1100 x 2050 mm Equipment: - automatic feed - infinitely variable speed Ncsdpsyzty Tofx Akuot - thread cutting device - adjustable drilling depth stop - coolant device - spindle protection - drill chuck

Condition: new, Year of construction: 2025, TVM Ø 400 - The Versatile and Customizable Saw for Your Carpentry Workshop The TVM 400 is the all-purpose saw that is essential for your workshop. With a solid and high-performance structure, it is designed to provide an excellent solution for cutting small-section woods, quickly eliminating knots and imperfections. Thanks to the option of customizing it with accessories such as roller conveyors and stops, the TVM 400 ensures maximum versatility and productivity (discover more details in the ACCESSORIES section). Key Features: Efficient and Cost-Effective: Ideal for small and medium-sized carpentry workshops, offering excellent value for money. Ease of Use: Perfect for use without the need for highly skilled personnel, saving time and resources. Nodov Iqaxjpfx Akuoct Reliability: Always ready for use, supporting all operational needs and reducing machine downtime. Cost Optimization: With the TVM 400, you get a durable machine that doesn’t require frequent maintenance interventions. Advantages: Operator safety ensured by a design aimed at reducing risks. Optimized ergonomics to improve productivity during processing stages. Wear compensation of materials without the need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Ready for CURSAL accessories, offering full customization according to production needs. Rationalized cost/quality ratio, making the machine a smart investment. Applications: Production of semi-finished wooden furniture components. Manufacturing of window frames and similar applications. Small-batch production of various types, for specific needs. TVM Ø 500 - The Advanced Solution for High-Volume Production The TVM 500 is one of the most in-demand saws on the market for its ability to handle high-volume production with quality and precision. The optimal cutting section allows for the processing of 90% of squared boards and is perfect for industries that require high performance, such as packaging, construction, and the production of sofa frames and laminated panels. This machine offers maximum flexibility and precision in operations, thanks to advanced features such as: Electropneumatic stops, ideal for cutting stacked boards with repetitive measurements. Numerically controlled stops, for precise measurement management, even in complex processes. Discharge of semi-finished products via transfer systems, discharge tables, or roller conveyors, ensuring smooth and fast material handling. Main Advantages: High productivity for large-volume applications. Versatility in sizes and configurations, adaptable to multiple industries. Operational flexibility supported by advanced accessories. The TVM Ø 500 represents a strategic choice for those seeking a saw capable of meeting the most demanding challenges in the industry, while maintaining high standards of quality and efficiency.

Year of construction: 2026, condition: new, Machine to close cans by flanging the lid onto the can. Semi-automatic version, the can is placed manually below the flanging unit. - Specifications: Can diameter: customized, can height: customized; max. speed of the machine in neutral: 20 cycles/min; power: 220, 0.55kW; machine dimensions: L400×W600×H1450mm; weight: 150kg. Nsdpsv Nk Thjfx Akuoct Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2026, The very efficient Cormak 32 column drill is an ideal solution for professional workshops and small-scale production. Equipped with a 1500W two-speed motor with a rotation direction switch for right and left. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. Additionally, the Cormak 32 drill is equipped with a gravity cooling system. The set includes a 150 mm vice and a drill chuck. Technical data Maximum drilling diameter 32 mm Grip capacity 16 mm Spindle to column distance 254 mm Maximum spindle stroke 120 mm MK4 spindle mount Maximum distance of the table from the spindle 595 mm The distance between the pin and the column is 260 mm Maximum distance of the base from the spindle holder 1075 mm Table dimensions 475x425 mm Column diameter 92 mm Motor power 1.5 kW 400V power supply Gravity cooling system Overall dimensions 1670 x 760 x 475 mm Net weight 144 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 120 200 250 360 400 450 950 1280 1520 1840 2440 3480 700 min-1 60 100 120 180 200 220 470 640 760 920 1120 1740 Standard equipment 1500W two-speed motor Left and right rotations DTR in Polish Ncedpfx Akoridpwsujt CE declaration Gravity cooling system Optional equipment feeder

Condition: new, Year of construction: 2026, The Cormak 25 column drill is a very efficient column drill, which is standardly equipped with a two-speed 1000 W motor with a rotation direction switch for right and left. The excellent design makes this device work very precisely. It has a table height adjustment using a toothed rack. The work table tilts from 0-45 degrees to the left and right. The set includes a 123 mm vice and a drill chuck. FREE MAGNETIC CHIP COLLECTOR ZW580! Technical data Maximum drilling diameter 25 mm Grip capacity 16 mm MK3 self-locking chuck The distance between the spindle and the column is 216 mm Maximum spindle stroke 80 mm Maximum distance of the table from the spindle 640 mm The distance between the pin and the column is 215 mm Maximum distance of the base from the spindle holder 1136 mm Table dimensions 355x355 mm Column diameter 92 mm Motor power 1000 W Overall dimensions 1635 x 642 x 356 mm Net weight 85 kg Spindle speed range Motor speed Spindle speed (min-1) 1400 min-1 160 240 290 350 410 480 530 590 660 720 1190 1350 1510 1970 2100 3000 700 min-1 80 120 140 170 200 240 260 290 330 360 590 670 750 980 1050 1500 Standard equipment 1000W two-speed motor Left and right rotations DTR in Polish CE declaration Ncedpfxsridn So Akust Optional equipment cooling system feeder

Condition: excellent (used), Column Drilling Machine Nedpfx Aoyzkbbokusct Inventory no.: 3719 Manufacturer: Huvema Model: HU MG 40 S * Drilling capacity in steel: 40 mm * Thread cutting: M24 * Spindle taper: MK 4 * Throat: 350 mm * Drilling stroke: 180 mm * Table: 500 x 450 mm * Column diameter: 150 mm * Speed range: 50 - 1450 rpm * Automatic feeds * Thread cutting unit M24 * Coolant system * Machine lamp * Tool ejector * Safety guard * Table swivel and tiltable * Total power requirement: 1.5 kW * Machine weight approx. 440 kg * In very good condition!

Condition: excellent (used), Column Drilling Machine Inv. no. 3860 Manufacturer: Huvema Model: HU 32 TI * Drilling capacity in steel: 32 mm Nsdoyzka Depfx Akujct * Thread cutting * Spindle taper: MK 4 * Throat: 350 mm * Drilling stroke: 180 mm * Table: 560 x 560 mm * Column diameter: 150 mm * Speed range: 65 - 2600 rpm * Automatic feed * Thread cutting device M 20 * Coolant system * Machine light * Tool ejector * Safety cover * Total power requirement: 1.5 kW * Machine weight approx. 460 kg Very good condition!

Year of construction: 2022, condition: new, functionality: fully functional, Completely new machine, packed. Did not suit our room since it is not installable two ways. Bought from KATOMSK AS Ncedpsyrb Swjfx Akujt

Condition: good (used), Year of construction: 1996, GILLARDON GB 40 V Drilling capacity in ST 60: 40 mm Drilling capacity in GG 20: 50 mm Maximum drilling diameter in ST 60: 55 mm Right/left-hand rotation Thread cutting device Coolant system MK 4 taper Stepless spindle speeds: 140 - 1100 rpm 3 automatic feeds: 0.1; 0.16; 0.25 mm/rev Distance table/spindle: 135 - 760 mm Distance table/baseplate: 1200 mm Table dimensions: 630 x 530 mm External dimensions approx.: 630 x 985 x 2020 mm with - Stepless speed adjustment - 3 automatic feeds Ncodoylygmopfx Akust

Condition: good (used), Gillardon GSB 20 pillar drilling machine Drilling capacity in steel (diameter) 20 mm throat 260 mm Ncjdpfxem Sg S Ns Akuet Drilling stroke 115 mm

Condition: good (used), functionality: fully functional, Data : Nsdoy Af Hzspfx Akujct Continuous drilling capacity in ST 60 30 mm 12 speed levels 60 - 2240 rpm Spindle motor 1.1 / 1.6 kW . Projection approx. 320 mm Spindle stroke 170 mm Column diameter approx. 120 mm .

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 4, drilling depth: 240 mm, total width: 480 mm, total length: 550 mm, drilling capacity: 45 mm, spindle speed (max.): 1,270 rpm, spindle speed (min.): 68 rpm, spindle stroke: 240 mm, SPECIFICATIONS Brand: Erlo Model: TCA-45 Capacity: 45 mm ø Table length: 550 mm Table width: 480 mm Spindle taper: MK4 Speed: 68 - 1,270 RPM Ncodpfx Aox Dcfhjkuet Arm reach: 360 mm Stroke: 240 mm Table height adjustable manually Automatic feed Gear-driven Machine dimensions: 1,000 x 700 x 2,400 mm

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 35 mm throat 320 mm bore stroke 150 mm spindle taper MT 4 table-size 500 x 400 mm spindle turning speed range 75 - 3.010 U/min feed range - boring 0,1 / 0,15 / 0,22 / 0,33 mm/U quill stroke 150 mm voltage 400 V total power requirement 1,8 kW weight of the machine ca. 275 kg dimensions of the machine ca. 0,70 x 1,00 x 1,95 m - Serial-No.: 138050673 - Electromagnetic feed Ncedpfx Akowlvlaoujt - Threading device - Machine vice 150 mm - Two clamping screws 14 mm - 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 32 mm throat 245 mm Ncodpfx Akowlvk Neuet bore stroke 135 mm spindle taper MT 3 table-size 410 x 380 mm spindle turning speed range 10 - 2.100 U/min voltage 400 V total power requirement 1,1 kW weight of the machine ca. 210 kg dimensions of the machine ca. 0,7 x 1,8 x 1,75 m - Threading device - Machine vice 150 mm - Drill cassette 9-piece 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray

Condition: excellent (used), Semi-automatic pallet wrapper Nedpfx Akeyx Ex Aeuect Inv. no. 3583 Manufacturer: Filma Model: FP 30 ES * Turntable positioning via fixed stop * Programmable number of bottom and top wraps * Turntable diameter: 1650 mm * Max. wrapping height approx. 3200 mm!!!! * Own weight approx. 500 kg * Suitable for Euro pallets and block pallets!!! * With access ramp * In very good condition!!

Condition: good (used), Maxion Unimax 3 Technical Data: Infinitely variable spindle speeds Range A: 80–1,440 rpm Range B: 180–3,200 rpm Spindle taper: MK 3 Continuous drilling capacity: 25 mm Standard drilling capacity: 30 mm Nsdpeyza Ausfx Akuect Tapping capacity: M 20 Spindle taper: MK 3 Drilling depth: 125 mm Throat: 260 mm Spindle-to-table distance: 90 to 840 mm Table size: 500 x 365 mm Column diameter: 110 mm Overall height: 1,855 mm Weight: 270 kg

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, For sale is a refurbished Gillardon pillar drill press. The machine has been completely disassembled and refurbished (including a new spindle bearing). Ncsdpfx Akjyy R N Asujt Gillardon GB 40 VE Year of manufacture 2003 Electromagnetic feed 0.1/0.16/0.25 on the joystick at the touch of a button Infinitely variable speeds 2-speed motor Work light Emergency stop button 200mm spindle stroke 350mm throat Table size 630x535mm Clamping surface 400x500mm MT 4 chuck Keyless chuck 3-16mm Total height 2060mm Weight 500 kg Pickup and inspection in 89558 Böhmenkirch possible by arrangement. Shipping for an additional charge. Forklift available for loading.

Condition: excellent (used), Alzmetall AC 25 pillar drilling machine, year of manufacture 1992. Very good condition, can be inspected under power. Ncedpfx Ajx Sqv Hokuot

Condition: new, Year of construction: 2026, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation Ncsdpfxofu Iwms Akujt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The drilling machine can be used both manually and fully automatically. After each drilling process, the system moves fully automatically in the X and Y axes to the next drilling position in the standard version. Nodpfofu Swxjx Akujct ADVANTAGES Potential operator errors are drastically reduced. Programming takes just a few minutes. Significant reduction in manpower. product details Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 3 T AV (alternatively also with Unimax 4 Basic) Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Thread cutting capacity M 20 Spindle MT 3 Automatic feeds (3T AV) 30 – 400 mm/rev Drilling depth 125 mm Column diameter 110 mm Weight 250kg Pole-changing motor 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Spindle speeds infinitely variable Range A 80 – 1,400 rpm Range B 180 – 3,200 rpm motorized height adjustment, anti-twist device Optional: thread cutting device Fully automatic execution Automatic positioning of the X-axis Automatic positioning of the Y-axis Automatic drilling process Total length: 7,500mm Manual drilling is possible Coordinate table with motorized drive for the Y-axis via the control Travel of the Y-axis 200 mm Movable clamping table with motorized drive for the X-axis via the control X-axis travel: 3,000 mm Clamping table with groove for clamping the pneumatic clamping pieces and material support blocks. 2-axis control with memory control with 3,000 memory options Minimum quantity spray system with spray head and holder It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.