Used Mfl Ste 100-65 for sale (38,166)

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Nedsvxvgrjpfx Acfewh

Condition: used, Year of construction: 1985, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a Njdsvg R Rzepfx Acfswh material strength of 450 N / mm². Electric 380 volt

Condition: used, Year of construction: 1984, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt Nsdpogvkmnsfx Acfswh

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Mannesmann Demag, control electronic modules from injection molding machine D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 Nwjdpfx Acsn Hbc Iofeh -Individual components: see photos -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Bachmann, control electronic modules from injection molding machine Demag D 100-275 NC -Card holder: Murrelektronik 630055 -Control card: Philips 9404 780 020 -Individual components: see photos Noden Hbckepfx Acfowh -Price/sale: complete -Total dimensions: 315/140/H215 mm -Weight: 1.4 kg

Condition: used, Linear drive, linear gear, screw jack, spindle drive -comes from a Homag edge banding machine Nedpfx Ajb R Iuljcfjwh -difficult execution -Adjustment path: 100 mm -Number: 2 pieces available -Price: complete for 2 pieces -Dimensions: 250/230/H800 mm/piece -Weight: 66 kg/piece

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape Njdpfx Acslu N Eajfswh -Manufacturer: Erge, heating tape, heating sleeve -Type: Ø165 x 100 mm -Item No.: 829 486 65 -Heating power: 2500 W -Voltage: 230 V -Dimensions: 220/180/H100 mm -Weight: 1.3 kg

Year of construction: 1989, condition: good (used), functionality: fully functional, 300kg/h Capacity Electrically Heated Kohnle Heat Treatment Line Fully functinal Still in operation Nedpfx Acoxqy Duofjwh Line Consisted With : Loading - Electrically Hardening Furnace (1989)- Oil Tank - Rare Washing Machine - WMA Loading Unit For Tempering - Gas Heated Tempering Furnace (Industrial Ofenbau 2007) Protection Gas : Nitrogen / Methanol

Condition: like new (used), Pump name: KRTK 100-400/654UG1-S Year: 2016 Q (capacity): 76.39 m³/h H (head): 51 m Njdpsu Up Rwefx Acfowh Motor power: 62 kW Speed: 1475 rpm

Condition: new, Year of construction: 2025, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - with NC control - three driven shafts - hydraulic adjustment of center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm Nwodpfxjd Ey A As Acfoh - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg NC control unit: two axes controlled touch screen memorize of 1000 programs interpolation

Condition: refurbished (used), functionality: fully functional, Year of construction: 2020, overall weight: 1,558 kg, total height: 785 mm, total length: 1,025 mm, total width: 710 mm, battery capacity: 560 Ah, battery voltage: 80 V, remaining battery capacity: 100 %, battery manufacturer: IBV, battery model: 80V 4PzS560, Forklift battery 80V 4PzS560 Battery 100% TESTED Year of manufacture: 2020 Dimensions (LxWxH): 1025mm x 710mm x 785mm Weight: 1558kg Battery has been serviced and tested by a specialist company. Nwsdpfx Acjx Hi Hajfsh Capacity test (C5 discharge test): 657/560Ah battery Remaining capacity: 100% With Aquamatic filling system (BFS) With terminal bolts but WITHOUT final discharge cable.

Condition: good (used), Year of construction: 2005, functionality: limited functionality, machine/vehicle number: M9405, color: green, - internal diameter of cyclone 750mm - sieve size 3000x1600 mm 1 level - indicative sand production 65 cubic meters / h - turbid production 10000 liters / min - Pump motor power 75Kw - Max. sieve motor power 6+6 Kw Nwodpju Avvxefx Acfeh - use and maintenance manual

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Material of construction: 316 Stainless Steel Width: 350 mm Horsepower: 1.5 kW Njdpfx Aozfh U Decfswh Length: 1,000 mm Jacket: No Type Of Ribbon: Single

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Nwedpezdn H Refx Acfjh Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: good (used), Steady rest universal swing Ø 100 Nodpfx Aozdirdocfewh Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, - Dimensions: 1370x190x2000 mm - Capacity: 100 trays Nodpfsy Hrf Esx Acfewh - Weight: 109 kg - The steam sensors are designed to be connected to the exhaust of your oven and not to the outlet of the hood, then routed to a drain. - The drain must be connected at the bottom section. - The steam radiators do not operate with the hood suction system. - There is no fan connection.

Condition: used, Year of construction: 1992, Unloading system Polar TR ER 100-3 (1992) Year: 1992 Description - On the right side of the guillotine Nwjdpfeuliw Tex Acfsh

Condition: refurbished (used), 100,000 liter buffer tank / pressure vessel, standing on a stand ring Vessel data: Volume: approx. 100,000 liters Operating pressure: max. 2 bar Operating temperature: max. 90°C Inner diameter: 3,000 mm Total height with feet: approx. 16,750 mm Ground clearance: approx. 800 mm Vessel with dished ends. Tank Equipment: ⦁ 1 DN 600 manhole with blind cover ⦁ 7x 3/8" pipes, closed inside the tank, open outside ⦁ 2 lifting eyes in the shell area ⦁ 2 lifting eyes on the top of the tank ⦁ 2 lifting eyes on the tank feet ⦁ 1 2" drain, connected to the side of the shell with a ball valve ⦁ 1 Ø33.7 x 3.6 mm vent, connected to the side of the tank and down outside the insulation, with a ball valve ⦁ 1 DN 125 connection, ending in a flange on the outside, and connected to the center of the tank with a 90° bend ⦁ 1 DN 125 connection, ending in a flange on the outside, connected to the top of the tank and connected to the center of the tank via 2x 90° bends We are happy to offer the new tank insulation in any thickness upon request. Nsdpfx Ajwf N Stocfjwh Please contact us if you are interested!

Year of construction: 2026, condition: new, Pasteurizing bath is suitable for the heat treatment of packaged fruit preparations (jam, wafers, herbs) or fermented preparations (vinegar, beer) and pickles. The packaging must be heat resistant as a glass or heat resistant plastic bag. The heat treatment technology is characterized by warming and holding, accurate temperature values and heat retention time by the product being treated and the user needs to know that the equipment only warms the treatment water and keeps it at the set temperature. Njdpjd Aq Ifjfx Acfswh Specifications: - Performance: 100 L/cycle - Electric demands: 9 kW, 400 V, 32 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 500x1100x900 mm - Weight: 75 kg - IP65 certified electronics - Heat exchanger: soft water - Thermometers: 1 pcs - Automatic heat control, very easy to clean. - With 4pcs vibration-free feet. It requires minimal maintenance.

Condition: excellent (used), CTS 3G C 400* - Superheated water boiler with manual wood waste feeding Thermal output: 400,000 kcal/h. Pressure: 4 bar. Superheated water temperature: 150°C. Control thermostat, safety thermostat, thermometer. Fuel: wood waste Smoke exhaust: cyclone, forced-draught fan, connecting ductwork Steaming chamber net capacity: 100 m³/batch DVK-I 100 m³ - 1 unit, 8.5 x 9 m x h 4.3 m Control system: Baschild Italy Sliding door Oxyvent overpressure system Nwjdpfxew Ev Tws Acfoh Stainless steel tanks and radiators on 3 sides Includes turnkey connections from boiler to steaming chamber and a complete boiler room with distributor, collector, pumps, expansion vessel, etc.

Condition: excellent (used), For sale: Electric chain hoist from the renowned manufacturer Yale, model CPVF 10-8 NE. The device is in very good technical condition and is equipped with a Magnetek radio remote control system (transmitter + receiver). Technical data: • Model: CPVF 10-8 NE Nodpfoyrh I Esx Acfjwh • Lifting capacity: 1000 kg • Year of manufacture: 2019 • Power supply: 400V / 3-phase • Lifting speed: 2 / 8 m/min • Control: radio remote control • Condition: very good, normal signs of use

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 140 x 60 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 7.10 kg Your contact persons in our company: Nwodpfowl Ncfjx Acfoh Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Scope of delivery includes: 01x deep beam, used Material color: RAL 5001 blue Total length: approx. 1,112 mm Inner length: approx. 1,103 mm for frame depth: approx. 1,100 mm clear support span: approx. 999 mm Profile dimensions: K 50 x 50 x 4 mm Beam support width: approx. 53 mm Unit weight: approx. 2.52 kg Your contacts at our company: Nsdpfx Aewwviijcfowh Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipping beyond this is associated with additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x deep beam, used Material colour: black Total length: approx. 1,111 mm Internal length: approx. 1,103 mm for upright depth: approx. 1,100 mm Clear support width: approx. 1,000 mm Profile dimensions: K 140 x 50 x 4 mm Cross member bearing: approx. 52 mm Unit weight: approx. 7.26 kg Nsdpfx Acswwuchefowh Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply; these can be requested from us separately depending on delivery location or scope of supply.

Condition: good (used), overall weight: 350 kg, Manufacturer Bekuplast Color: Grey Material: Polypropylene External dimensions: approx. 600x400x400 mm (LxWxH) Internal dimensions: approx. 555x360x385 mm (LxWxH) Nedpfxsvb Hvio Acfjwh Quantity: 100 pieces Height when folded: 85 mm Stack height: 75 mm Handles: Front side open / long side closed Weight: 3.41 kg per piece Base with ribbed honeycomb structure Water drainage holes on the base