Used Microstep Mg 4501.20 Bkp for sale (893)

Condition: new, Year of construction: 2026, The ideal machine for shredding softwood. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Rotor diameter: 260 mm, Hydraulically actuated pusher Screen perforation to choice (12 - 40 mm) Extraction port Ø 160 mm Njdpfxewzarco Akujct Weight approx. 1,100 kg Dimensions (LxWxH) approx. 1805 x 1118 x 1650 mm Colour: blue / grey Requirements for raw material: - Moisture content (atro) must be below 30% - Metal and mineral contaminants such as sand, stones, etc. lead to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife Ncjdpfjdv Eu Hex Akuet * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood Another machine now available (ex-works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14+2 pieces, 40x40mm, reversible multiple times, Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 cbm, Hydraulically operated pusher Screen perforation of your choice (12 - 40mm) Extraction socket Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: Nodpfx Aked E R D Soujct - Additional row of knives + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the pusher from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for the conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 net (rarely required. Closed, even more robust rotor bearing. May be considered for screens smaller than 15 mm or high fine content. Not necessary if bearings are greased approximately every 2 weeks in operation) Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. increase wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight company and we will document the test with photos and videos.

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables Ncedpfxogmfa Ao Akujt including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: used, Shredding Machine MGZ 1330, 37 kW Operating hours: 275 Included: Ncjdpfjx Tfdhex Akuet - Second knife row - Fast hydraulics for increased throughput - Preparation for conveyor belt Optional: - Conveyor belt with automatic metal separator Your advantages: + Extremely large cutting chamber opening; top: 1300x1200mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful, 37 kW start-up power Technical data: Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen hole size (mm): configurable Tools: 37/70 knives Extraction connection diameter (mm): 200 mm Dimensions: 2430x2410x1735 mm (LxWxH) Weight (approx. kg): 3,500 --- Feedstock requirements: - The moisture content (atro) must be below 20% - The feed material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Condition: excellent (used), Year of construction: 2024, operating hours: 9 h, Drivetrain Drive: Wheel Weights Empty weight: 6.355 kg Functional Mast: articulated arm Lifting capacity: 250 kg Nodpfx Ajy Ttp Sjkuoct Working height: 1.570 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Remanufactured: Yes Max. horizontal reach: 762 m Transport dimensions (LxWxH): (L/B/H): 6,58m / 2,26 m / 2,27 m Additional information Please contact Tobias Mayr for more information

Condition: used, MYFORD MG 12 HM UNIVERSAL CYLINDRICAL GRINDING MACHINE MAKE MYFORD, MADE IN ENGLAND MODEL MG 12 HM YEAR MID 90s SWING 127.0 mm LENGTH 305.0 mm PLUS Nsdpfoy Nmg Aox Akusct HYDRAULIC MOVEMENT DROP DOWN INTERNAL INFINITELY VARIABLE SPEED CONTROL ON THE WORK HEAD SPARE SWIVELLING WORK HEAD RANGE OF TOOLING

Condition: good (used), Year of construction: 2007, 2 x KSB Pump ETANORM G 150-250 G10 Motor 1LG4183-4AA60 SN 02 - second-hand - : Price per unit ex location: 5.750.-€ (net) Manufacturer: KSB Type: ETANORM G 150-250 G10 Serial number: 9971143054 000100 02 and 03 Year of construction: 2007 Q400.00m3/h H 14.00m n 1460 1/min Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony Ncsdpeuntlmefx Akuot

Condition: excellent (used), Year of construction: 2016, 1. Gas burner WEISHAUPT WM - G30 - 3800 kW, with gas line Dungs DN 65 Output: 400-3800 kW Design: ZM-LN Year of manufacture: 2016 2. Gas burner WEISHAUPT WM-G30/2-A - 4100 kW, with gas line DUNGS DN65 Ncodpfx Akewg Hkcoust Output: 450-4100 kW Design: ZM Year of manufacture: 2010 3. Gas burner WEISHAUPT G50/1-B - 4000 kW, with gas line DUNGS DN65 Output: 550-4000 kW Design: ZM-NR Year of manufacture: 2004

Condition: excellent (used), Year of construction: 2020, 1. WEISHAUPT WM-G10/4-A, (with gas duct) - Output: 100-1100 kW - Design: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2015 (1 unit), 2013 (2 units available) 3. WEISHAUPT WM-G10/2-A Nodpfx Akowgyrtsuoct Design: ZM-LN Output: 75-630 kW Year of manufacture: 2021 4. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 125-900 kW - Design: ZM-LN - Year of manufacture: 2011 5. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2011 6. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2009

Condition: new, functionality: fully functional, Hirschmann OZD Profi 12M G12 Multimode converter 2-port - Signal converter Ncodpfxstvz D Es Akust Hirschmann OZD Profi 12M G12 : Transfer rate 500 kbps, Service primary side PROFIBUS, Connection type primary side other, Service secondary side PROFIBUS, Connection type secondary side D-Sub female 9-pin, Bidirectional yes, Overcurrent protection no, Galvanic isolation without, Rated current consumption 200 mA. Good working condition. Please check out our other listings as well.

Condition: used, mileage: 586,500 km, power: 346 kW (470.43 HP), first registration: 03/2023, fuel type: diesel, empty load weight: 10,270 kg, overall weight: 26,000 kg, tire size: 315/70 R22,5, axle configuration: 3 axles, wheelbase: 4,500 mm, brakes: retarder, gearing type: automatic, suspension: air, Equipment: cruise control, parking heater, spoiler, MAN standard interchangeable frame, 7.45m, BDF compatible, tire size 315/70 R22.5, trailer coupling, roof spoiler, DuoMatic air connection, refrigerator, retarder, sun visor, tail lift, Dautel DS 1500 VA. Sale exclusively to commercial businesses, with no warranty of any kind. Errors and prior sale excepted. Nodpfx Akoy Tl T Aeuect

Condition: used, mileage: 23,800 km, power: 152 kW (206.66 HP), first registration: 01/2025, fuel type: diesel, empty load weight: 2,670 kg, overall weight: 35,000 kg, tire size: 225/65R16, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 7, Equipment: air conditioning, central locking, Additional features | Model: 35S21HA8 D/P | Cab 33S/35S Daily 4x2 Model Year 2021 (D30C) | Tires 225/65 R16 | Driver's seat "Comfort" (fully suspended) | Voice assistant | Rear parking assist | Heat-reflecting glazing (tinted windshield) | Electric windows | Sliding bracket for spare wheel | ECO mode | Speed limiter 160 km/h | Leather steering wheel | Daytime running lights | Heated and electrically adjustable exterior mirrors | EURO VI-E | Ball-type trailer hitch. Sale exclusively to commercial businesses, with no warranty of any kind. Errors and prior sale excepted. Njdpfx Akey Tl Srjusct

Condition: used, mileage: 23,800 km, power: 152 kW (206.66 HP), first registration: 01/2025, fuel type: diesel, empty load weight: 2,670 kg, overall weight: 35,000 kg, tire size: 225/65R16, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 7, Equipment: air conditioning, central locking, Additional features | Model: 35S21HA8 D/P | Cab 33S/35S Daily 4x2 Model Year 2021 (D30C) | Tires 225/65 R16 | Driver's seat "Comfort" (fully suspended) | Voice assistant | Rear parking assist | Heat-reflecting glazing (tinted windshield) | Electric windows | Sliding bracket for spare wheel | ECO mode | Speed limiter 160 km/h | Leather steering wheel | Daytime running lights | Heated and electrically adjustable exterior mirrors | EURO VI-E | Ball-type trailer hitch. Sale exclusively to commercial businesses, with no warranty of any kind. Errors and prior sale excepted. Nedoy Tl Sfspfx Akujct

Condition: used, Year of construction: 2007, Lissmac SBM-GS The grinding and deburring machine is suitable for double-sided processing of workpieces made of steel. Sheet metal parts, punched parts, and laser-cut parts can be processed optionally on the top, bottom, or both sides in a single pass. The machine is supplied complete with extraction unit. Ncsdewwgwkopfx Akuot Working width: 1000 mm Workpiece thickness - max.: 0.5 - 80 mm Abrasive belt width: 60 mm Machine weight: 4027 kg Dimensions (W/D/H): 3260 / 1500 / 1800 mm Voltage: 400 V / 50 Hz Network configuration: 3~ PEN / 3~ PE+N Rated current: 110 A Rated power: 49.9 kW Protection class: IP 42 Feed rate stepless: 0-4 m/min

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 197430 € 3731.43 € 1010 mm 590 mm 1000 x 400 mm 1000 x 400 mm 0 -25 m/min 0 - 4000 mm/min 0,001 mm 450 mm 450 mm 0 - 3800 mm/min 0.001 mm 600 - 3600 1/min 11 kW 3675 mm Ncsdpfx Akjy Ubbfeujt 4055 mm 2480 mm 6500 kg 423 kg 670 kg 405 x 50 x 127 mm 2,4 / 3,9 kW 5.9 kW 0,005 mm 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart iControlIV control with 15" touchscreen with electronic wired handwheel PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes with precision ball screws and AC servo motors A balancing system is attached to the spindle housing to reduce stress on the machine structure Full enclosure with lighting Electromagnetic chuck Coolant system 300 l/min with drum paper filter and magnetic separator Driven wheel dressing device mounted on the table, 1.7 kW, with double support, width 200 mm, diameter 35 or 52 mm Grinding wheel Grinding wheel flange Grinding wheel balancing scale Heat exchanger for the control cabinet Machine and equipment compliant with CE regulations Operating instructions in GERMAN or ENGLISH Accuracy standard ISO 1986-1 OPTIONS (prices on request): Linear encoders for Y and Z axes Oil mist collector

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 171130 € 3234.36 € 610 mm 590 mm 600 x 300 mm 600 x 300 mm 0 - 25 m/min Ncsdpjy Uba Ujfx Akust 0 - 4000 mm/min 0,001 mm 350 mm 450 mm 0 - 3800 mm/min 0.001 mm 600 - 3600 1/min 11 kW 3103 mm 3933 mm 2480 mm 5800 kg 810 mm 314 kg 420 kg 405 x 50 x 127 mm 2,4 / 3,9 kW 3.9 kW 0,005 mm 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart iControlIV control with 15" touchscreen with electronic wired handwheel PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes with precision ball screws and AC servo motors A balancing system is attached to the spindle housing to reduce stress on the machine structure Full enclosure with lighting Electromagnetic chuck Coolant system 200 l/min with drum paper filter and magnetic separator Driven wheel dressing device mounted on the table, 1.5 kW, with double support, width 100 mm, diameter 35 or 52 mm Grinding wheel Grinding wheel flange Grinding wheel balancing scale Heat exchanger for the control cabinet Machine and equipment compliant with CE regulations Operating instructions in GERMAN or ENGLISH Accuracy standard ISO 1986-1 OPTIONS (prices on request): Linear encoders for Y and Z axes Oil mist collector

Condition: ready for operation (used), ABM Greiffenberger ZBF12NHR-S0 / G80F / 4D808-4 geared motor, serial number: 191378798 / brake TS 10.00 Nm 230V~ 0.26A, used, good condition, fully functional, delivery as per photos. Njdpjy Sdrhjfx Akujct

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center manufactured by DMG, model CTX beta 800, year of manufacture 2009. Nsdpfxoyq Hq Nj Akuoct The machine is in a well-maintained and fully operational condition. Technically flawless and immediately ready for operation. Technical Data Machine type: CNC Turning Center Manufacturer: DMG Model: CTX beta 800 Year of manufacture: 2009 Control system: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer service Technically flawless and fully functional Inspection under power possible by appointment Service and maintenance reports available Extensive accessory package Driven tools by WTO Further documentation and photos available on request Availability: from July 2026 If interested, simply write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: good (used), Absolute rotary encoder, encoder Ncsdpfxjd Ttrro Akujt -Type: AMG 73 S W29 S2048 -Factory No.: Quantity: 1 available -Price: per piece -Weight: 0.6 kg

Condition: excellent (used), Year of construction: 2008, feed length X-axis: 5,500 mm, feed length Y-axis: 650 mm, feed length Z-axis: 750 mm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, table length: 5,500 mm, table width: 750 mm, Profile grinder MAEGERLE - MGC-L 560 Nodpfx Akjx Swqwjujct Surface, Profile grinding machine 5600 mm CNC gear rack grinding machine Automatic grinding head B-Axis Grinding head ca 20 gr swivel ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) Pendel opperation ( double table) Dresser automatic Table dresser X - Travel: 5500mm Y - Travel: 650mm Z - Travel: 750mm Table Length: 5500mm Table Width: 750mm Feed rate X-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Grinding stone dimensions:600 x 300mm Power: 115kW Speeds: 8000Rpm Cooling system: Yes Feed rate Y-Axis: 20000mm/min. Length: 10700mm Width: 4700mm Height: 3800mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, empty load weight: 2,570 kg, maximum load weight: 15,280 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2022, suspension: air, tire size: 385/65 R 22,5, Krone 2-axle turntable trailer, interchangeable chassis, tire size 385/65 R 22.5, tread depth 9mm, disc brakes, BPW axles, Duomatic air connection, 745m-BDF. LOCATION: 40721 Hilden (Germany). Sale exclusively to commercial businesses, with no warranty of any kind. Subject to errors and prior sale. Ncedpoy S Aqpsfx Akuet

Condition: ready for operation (used), Year of construction: 2022, Features: • Lamination with BOPP, PET films, etc. • Electronic control of temperature and speed • Anti-curl system for material • Automatic sheet separation • High stability in continuous production • Hot Knife Technical data: Model: TLMG 50 REB 100 / 1400 Year of manufacture: 2022 Maximum sheet size: approx. 1000 × 1400 mm Minimum sheet size: approx. 300 × 300 mm Nsdpey I A Dhsfx Akuoct Maximum speed: up to 7,500 sheets/h Heating system: Thermal oil calender Lamination type: WET / DRY Feeding: Automatic Tension system: Automatic

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, STC-Ref:G-022-7713 Heidelberg PM-GTO-52-1 ,Year: 2005, impressions: approx. 35 Mio. format: 360x520 mm, 1 colors equipped: Ncsdjy R A Ixopfx Akujt - quick release plate clamps - Plus-version: prepared for numbering and perforating - direct dampening (Heidelberg for GTO 52) - Technotrans alpha.d 5 GTO cooling unit - basedevice for perforating and slitting

Condition: good (used), Norton flat grinding machine Ncsdpfei Eqzwox Akust Type: MGS 17A X-travel: 540 mm Speed: 2880 RPM Bed: 660 x 150 mm Dimensions: 140x110x160 cm LxWxH