Used Mit Drehteller Flame Cutting Machine for sale (72,255)

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console Fpedpfx Asy Rummjd Nsg – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: – Pneumatic clutch and brake Fodpfx Aoy Rumaed Nspg – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection Fpodjy Rulvjpfx Ad Njg – 3 operating modes: single, continuous, delayed opening – central lubrication – additional safety guards – operation tools – hardened pressure plate

Condition: good (used), functionality: fully functional, Year of construction: 2009, laser type: CO₂ laser, laser power: 3,200 W, X working area max.: 6500 mm Laser power: 3200 watts Fodpfx Asytpimjd Nopg Control: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TLF 2000, high-frequency excited, with cooling unit - Drives: Maintenance-free three-phase servo motors - Hl-LAS high-pressure cutting - Fast processing with SprintLas - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens, DIAS III - Quick-change device for cutting head - Laser power control - Laser logbook function - Automatic shut-off - Work area lighting - Control system SINUMERIK 840D: Open PC-based control, easy operation, diagnostic functions, maintenance logbook, technology data, teleservice, 3.5" floppy disk drive, RJ45 network connection - Safety: Multi-beam light barriers, fully enclosed and ventilated beam guidance, compact extractor, protective cabin - PRS 3001 unloading station with brush table - Chuck set D 20-85 mm Special equipment: + Upgraded to Laser TruFlow 3200 + SeamLine Tube + LoadMaster Tube 6.5 m, rear + Focus Line

Condition: used, Year of construction: 2010, Laser cutting machine Fsdpfxsyvk R Es Ad Njpg Manufacturer: Eurolaser Model: LCS XL-1600 Year of manufacture: 2010 Power: 200 W Working area: 2,270 mm x 1,600 mm Electrical data: max. 6 kW / max. 32 A Previous application: Cutting acrylic glass The laser source was replaced 5 years ago ä12526

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,691 h, machine/vehicle number: A0261G0093, controller model: Siemens Sinumerik 840D SL, laser type: fiber laser, laser power: 8,000 W, sheet thickness (max.): 32 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 115 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 6,000 mm Working area Y-axis: 2,500 mm Working area Z-axis: 115 mm Maximum sheet thickness, mild steel: 32 mm Maximum sheet thickness, stainless steel: 30 mm Maximum sheet thickness, aluminum: 25 mm Maximum sheet thickness, copper: 10 mm Maximum sheet thickness, brass: 10 mm Maximum workpiece weight, pallet changer: 3,300 kg Maximum workpiece weight, both pallets: 5,700 kg Max. speed: 140 m/min MACHINE DETAILS Control unit: Siemens Sinumerik 840D SL Operating system: Windows 10 IoT Laser power: 8,000 W Laser type: TruDisk 8001 Average power consumption: 17 kW Compressed air: 5 m³/h Dimensions (L x W x H): 16,770 x 7,158 x 2,130 mm Operating hours Fpjdpjy Iz N Ajfx Ad Nog NC on-hours: 17,501 h Laser on-hours: 4,691 h EQUIPMENT Incline conveyor Fully enclosed machine frame Viewing window Automatic pallet changer Left-side installation Cooling unit Dust cover for control cabinet Working area lighting Process monitoring cameras Multi-sheet processing Positioning laser DetectLine BrightLine Smart Collision Prevention Performance Package Melt Cutting Copper cutting package Brass cutting package Highspeed cutting package Drop&Cut

Condition: used, Year of construction: 2011, CNC portal plasma cutting machine Manufacturer: Eckert Fjdpfxey Nqcbo Ad Nepg Model: Jantar 2 Year of manufacture: 2011 CNC control Working area: 2x4 m 1 plasma torch with power source Kjellberg HiFocus 161i Automatic gas console Extraction table 12526ä

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Li Shenq LS 1670 ref 2996 year 2011 counter – 8 million cycles max format 1200 x 1670mm Fsdpfxoy Rxk No Ad Njpg max cutting force – 400 tons max speed 4500 sheets/hour Flute types E, B, C, EB, BC max – 8mm stripping unit hybrid delivery – high pile delivery and batch delivery

Condition: good (used), Year of construction: 2000, Parts from Prima Power Rapido 5 Laser source Fpsdpfew Shzxex Ad Neg Touch control P9000L / Primach 900L 3D laser head spare parts and manuals

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Fedoy E Nykjpfx Ad Nepg Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Fpedpfx Aey E Nxged Nog Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: used, Year of construction: 2004, machine/vehicle number: 019, Model: SL Year: 2004 Serial number: 019 Fpjdpfx Aoy Idkced Nsg Stock number: 3282 Capacity: max. 200 strokes/min Cutting thickness: max. 20 mm Band width: 565 mm Discharge height: 970 mm Compressed air: 4 Bar Power: 3 x 400V, 50Hz, 4kW Dimensions: 1200 x 1700 x 2000 mm Weight: 750 kg

Condition: good (used), Steel wire sheet cutter Cutting length 3900 mm Dimensions Length: 5100 mm Width: 1700 mm Height:3100 mm Fpjdpfjgiplvjx Ad Nog

Condition: used, Kaltenbach saw, cutting machine, mitre saw, metalworking circular saw, used machine Manufacturer: KALTENBACH Model: KKS Machine No.: 21139 Electrical specifications: 400 V Weight : 1200 kg aprox. Cutting speeds (blade peripheral speed): Z59 tooth count: • 1st gear: 17 m/min • 2nd gear: 34 m/min Fedpsyfnpiefx Ad Nepg Z72 tooth count: • 1st gear: 14 m/min • 2nd gear: 28 m/min Z90 tooth count: • 1st gear: 11 m/min • 2nd gear: 22 m/min

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current Fpsdpfx Adoy Nd Hyj Nsg • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: used, functionality: fully functional, The REMS Magnum pipe threader is suitable for pipes from 1/4" to 2". The following threading dies are included: - 3x: R1/2 - 3/4 - 5x: R1 - 2 The unit has been function-tested and comes with an electrical inspection carried out by a professional electrical company. Fpedoyyxi Rspfx Ad Njg

Condition: ready for operation (used), Dimensions: Width: 180 mm Depth: 460 mm Height: 280 mm Year of manufacture: 2008 Fjdpfx Aoxfk Dzjd Nopg Cutting thickness: Quality cut 12 mm – Severance cut 14 mm

Condition: repair required (used), functionality: limited functionality, Year of construction: 2017, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS-4000-CUT, We offer this repair-required VIRS MSF 3001.15L laser cutting machine, year 2017. Fodpsy Ri Tuefx Ad Nspg Manufacturer: Microstep / VIRS Model: MSF 3001.15L Year of manufacture: 2017 Modules 1, 4, and 5 automatically lock immediately after cutting and require unlocking by IPG. Half of the 2 kW power is available. If you have any additional questions or need more information, please send us a message or call us.

Year of construction: 2016, condition: ready for operation (used), - USED - CO2 TUBE LASER CUTTING MACHINE WITH LOADING/UNLOADING SYSTEM MAX CUTTING THICKNESS: 16 mm mm MIN CIRCULAR SECTION: 80 mm MAX CIRCULAR SECTION: 610 mm MAX SQUARE SECTION: 400x400 mm MAX RECTANGULAR SECTION: 500x300 mm Fpodjytkdlspfx Ad Nsg SOURCE: ROFIN DC045 ; 4500 W CONTROL UNIT: SIEMENS 840D WEIGHT: 100000 Kg ACCESSORIES: FUME EXHAUSTER NOTE: LENGTH OF LOADING BAR MIN.4.000-MAX 18.000 mm; LENGTH OF UNLOADING BAR MIN. 3.000 - MAX 12.500 mm; SHORT PIECE UNLOADING LENGTH UP TO 3.200 mm; 3D HEAD; CAPACITIVE SENSOR; AUTOMATIC SETTINGS; BOOSTER; FOCUS AUTOMATIC ADJUSTMENT

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 8,000 h, machine/vehicle number: 8259211467, control type: CNC control, degree of automation: automatic, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS6000U, laser hours: 8,000 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 10 mm, pipe diameter (max.): 400 mm, pipe length (max.): 6,000 mm, table length: 3,060 mm, table width: 1,530 mm, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 160 mm, positioning speed: 140 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 900 kg, power: 4 kW (5.44 HP), input voltage: 380 V, total length: 12,635 mm, total width: 7,905 mm, total height: 2,277 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, - Cutting head: Precitec Procutter 2.0 F150 TUBE CUTTING FUNCTION Fsdpfx Asy Naypsd Nspg - Max diameter of tube to be cut (D): 30 - 400 mm - Max square tube: 250 x 250 mm - Cutting range of profiles (length): 3000 mm - Max length of tube to be cut: a) Round tube Dmax = 115 mm, max length is 6000 mm (possible to feed manually through the opening in the chuck) b) Square tube 30 x 40 up to 80 x 80 mm, max length is 6000 mm (possible to feed manually through the opening in the chuck) c) For larger tubes and profiles, max length is 3000 mm - Positioning accuracy of tube/profile cutting: +/- 0.5 mm per 1000 mm. This value is given for the first 1000 mm. Further accuracy depends on the straightness and precision of the tube/profile. CNC and Software coming with the machine: - CNC control: SIEMENS SINUMERIK 840D - LANTEK Expert Cut-Plus: 1 license (recommended to update) - 2D file import. Dwg and dxf - CSV file import (Lantek format and data must be followed)Warehouse module shows sheet residues and stock levelsPlugin for SolidWorks and Solid Edge - LANTEK Flex3d TUBES: 1 license (recommended to update) - 3D importCSV file import (Lantek format and data must be followed) OTHER OPTIONS - Automatic nozzle cleaning and calibration - Exhaust gas filter - Central lubrication - Motorized scrap conveyor under the working table - Work zone lighting - Remote management for factory technical support machine is available for immediate delivery. The buyer has the right to ask questions and come over to check the machine. Later claims will not be considered. Dismantling of the machine, packaging for transport, loading into a container/truck - not included in the machine price.

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 1,370 mm, BM5150 Fjdpfx Adjv Ic H De Nspg P137 CUTTING LINE - refurbished => Package Price €26.000 1) Polar 137EMC-MON AT Guillotine 1995 -> single item price 18.000 € 2) Transomat TR1ER145-3 Downstacker/Palletiser -> single item price 10,000 € 3) Jogger Polar RA-B-5 with Air Removal -> single item price 3.000 € 4) Paper Lift -> single item price 1.500 € Contact us for further info and for personal price negotiations

Condition: good (used), functionality: fully functional, Year of construction: 2000, Equipment: CE marking, PLS2500 2D laser with 2 x cutting table with usable area: 3140 x 1640 x h100mm, Axis stroke 3000x1500x150mm (XYZ), Maximum speed linear axes 40m/min (XY) and 20m/min (Z), Fpedpoxx R A Dofx Ad Nsg Neck LGL France type NLEX 35, Sideros Engineering dust extraction system 3000W CO2 laser source DOCUMENTATION AVAILABLE. Machine dismantled and prepared for loading. It was in perfect working condition. Special price for immediate purchase.

Condition: excellent (used), Year of construction: 2018, LARA CDCH-1400 SHEAR (year 2018) With discharge table. Hydraulic shear designed for cross-cutting strip material and managing scrap in coil feed lines. Supplied together with a discharge table, allowing for convenient and safe evacuation of cut material while maintaining a clean and continuous production process. Robust equipment with heavy-duty industrial construction, especially suited as an auxiliary component for cutting, stamping, or coil-feeding lines. Main Features • Hydraulic cross-cut shear • Hydraulic drive • Robust design for continuous operation • Clean and precise cutting of metal strip • Integrated discharge table • Facilitates evacuation of scrap and off-cuts • Improves ergonomics and orderliness on the line • Keeps the work area clear • Heavy-duty industrial construction • Rigid and stable frame • Designed to be integrated at the same height as the LARA feeder/straightener • Easy integration into existing lines • Safety system • Integrated into the line control system • Designed in compliance with CE standards Work Materials • Carbon steel • Stainless steel • Aluminum and light alloys Fpedpfx Adey Edlhs Nsg Main Technical Data • Maximum working width: up to 1,400 mm • Type of drive: hydraulic • Working pressure: 4–6 bar (pneumatic control system) • Power supply: 400 V / 50 Hz

Condition: like new (used), Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 4,000 kg, table length: 14,000 mm, Equipment: documentation/manual, FOR SALE: Voortman MO Compact 900 — 6-Axis CNC Pipe Plasma Cutting Machine (2025) Manufacturer: Voortman Steel Machinery / Müller Opladen GmbH Fedpfxey H I Tre Ad Njpg Model: MO Compact 900 Commissioned: 2025 Condition: Demo machine — less than 200 production hours, essentially as-new Type: CNC plasma pipe profiling machine (6-axis) Category: Plasma cutter / Pipe cutting machine Machine description: This Voortman MO Compact 900 is a state-of-the-art 6-axis CNC pipe cutting machine capable of processing round pipes with diameters up to 914 mm and lengths up to 12,000 mm, with wall thicknesses between 3 and 50 mm. Installed in 2025 in Belgium, this machine has less than 200 running hours, making it virtually new but available at a pre-owned price point. The 6th CNC axis ensures a constant torch-to-material distance for perfect weld preparations and bevel cuts up to ±45°. The proprietary 3D Azimuth cutting head offers torch adjustment of ±60° and 380° rotation, allowing highly accurate contour cutting for any pipe geometry. Included equipment: — Voortman MO Compact 900 pipe profiling machine (6 CNC axes with x-rail, truck, column, and cutting unit) — Hypertherm MAXPRO200 plasma source (200 A, 100% duty cycle, manual gas console) — 3D Azimuth cutting head with intelligent torch positioning for x-, y-, and v-bevel weld preparations — Electromechanical tracer arm for continuous pipe circularity measurement — Self-centering three-jaw chuck (1,200 Nm torque) — Pipe conveyor system on rails — Dual-point fume extraction (at cutting head and through the chuck) — Voortman Filter Unit ECO6/HCS with Donaldson Ultra-Web® cartridge technology and spark arrestor — Electrical cabinet with CNC unit, PLC, IP54 protection, and power buffer — Industrial PC with 22” touchscreen and mobile control panel — All safety devices (CE certified to 2006/42/CE and 2004/108/CE standards) — Complete technical documentation, operator manuals, and installation drawings Key specifications: — Clamping diameter range: 50 – 914 mm — Max pipe length: 12,000 mm — Max pipe weight: 4,000 kg (with pipe carriages) — Plasma bevel angle: +45° / −45° — Cutting capacity: 3 – 50 mm (mild steel) — Pierce capacity: 32 mm — Chuck rotation speed: 0 – 10 rpm — Torch carriage speed: 0 – 15,000 mm/min — Installation dimensions: 7.0 × 4.0 × 4.0 m — Machine weight: 6,000 kg Important: COROBS machine control software licenses are not included and must be obtained separately from Voortman. Voortman offers professional reinstallation, commissioning, operator training, and maintenance contracts at the buyer's site. Why choose this machine? A new MO Compact 900 currently costs over EUR 350,000 and comes with a 6–12 month delivery time. This unit delivers identical capabilities, is immediately available, and represents significant savings. Full OEM support from Voortman is available to the buyer. Location: Belgium (inspection by appointment) Delivery: Ex-works. Dismantling and transport subject to agreement. For questions or further information, please send us a message or call.

Condition: new, functionality: fully functional, Year of construction: 2026, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Fedpfxoikivfe Ad Nspg Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING