Used Mobile Extraction System / Raw Air System for sale (62,579)

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Nwodpoyq Nl Nofx Ai Ten Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% - Stock No.: 1109

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used Nedpjxnprcjfx Ai Tswn For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, functionality: fully functional, total height: 938 mm, total length: 2,000 mm, total width: 1,100 mm, overall weight: 100 kg, Equipment: CE marking, documentation/manual, type plate available, ISI-FLOW DESK Standard – 1000S – 1700 m³/h Extraction table, suitable for gluing, sanding, polishing, welding, or manual cutting. The ISI Flow Desk 1000 S extraction table is a simple standard workbench for extracting non-explosive, dry dust and gases. TECHNICAL DESCRIPTION: Possible extraction capacity: 1700 m³/h Work surface W/D in mm: W 980 / D 960 Work height in mm: H 638-938 mm Table load: 150 kg/m (wood, with evenly distributed load) Work surface: Wooden slats (optional steel, stainless steel, or plastic slats) Overall dimensions W/D/H in mm: W 1076 / D 1000 / H 938 (other lengths and depths available as options) Fan capacity: without fan Pipe connection: D=161 mm Color: RAL 7042/RAL 7011 Weight: 100 kg Njdpfx Aozdtquji Tewn Application: The workbench is used for extracting non-explosive, dry dust and gases. It can be used as a gluing, sanding, polishing, welding, or manual cutting table. Your advantages of the ISI – Flow Desk series: - 8 device variants available - Simple connection to extraction system via nozzle at the end of the table - The design of the table allows working from 3 sides - Height adjustment - Wide range of assembly and connection accessories - Quality Made in Europe The ISI Air extraction table must not be used in conjunction with ATEX zones.

Condition: good (used), Year of construction: 2014, Capacity: 100 + 30 L Nodpfez D Tvnjx Ai Tewn

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, For sale: Losman air cleaning units in excellent condition, suitable for applications such as removing oil mist generated in metalworking. The cleaned air is returned to the workspace, and the condensed coolant collected during filtration can be recycled. There are 2 units available, one of which is from 2014. Both units have had their filters replaced. Nwsdpfx Aoyk Sknoi Ten

Condition: ready for operation (used), Year of construction: 2019, operating hours: 500 h, Proven and reliable equipment, the Clim 10 or 20 HP is well-suited for temporary air conditioning (cooling and heating) of large spaces. It has been specifically designed and developed to operate completely independently without a water circuit. It can be installed with the same efficiency either inside or outside the areas to be treated. Its integrated control module automatically manages the thermal regulation of the areas based on the entered parameters. 20 HP Model: Powered by 380 V three-phase power. 5 air conditioners available for this model. Usage: between 4,000 and 7,000 hours depending on the machine. Unit price: €4,550 (excluding VAT). 10 HP Model: 220 V single-phase power. 5 air conditioners available for this model. Usage: between 500 and 2,000 hours depending on the machine. Unit price: €3,540 (excluding VAT). Nsdpfx Aijz Rv Sme Tswn

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 50040212, total width: 1,000 mm, total length: 1,000 mm, total height: 2,300 mm, type of input current: AC, Equipment: documentation/manual, 4x Automatic Print & Apply Labeling Systems Bluhm Weber Group LEGI-AIR 4050E / 4050E NC(V2) – incl. Zebra ZE500 printer and documentation For sale are four high-quality, automatic label printing and dispensing systems (Print & Apply) from Bluhm Weber Group (Weber Marking Systems), model series LEGI-AIR 4050E. These robust, modular systems are designed for continuous industrial operation in logistics and production. All units feature integrated Zebra ZE500 thermal transfer/thermal direct printers and complete documentation. Condition: fully functional, only dusty. Overview of the systems: 2x LEGI-AIR 4050E NC(V2) – Top Apply Labeling System – Automatic labeler, top application Zebra printer ZE500 Pneumatic, height-adjustable 900–2200 mm Label format: 150 × 110 mm Type designation, among others: 30 – RH – ZE543 – LK400 Connection: 100–240 V AC / 50–60 Hz / 700 W / 6 bar Year of manufacture: 04/20 Dimensions (L × W × H): approx. 1000 × 1000 × 2300 mm Price: €5,900 each net (2 units = €11,800 net) 1x LEGI-AIR 4050E – Top Apply Labeling System – Automatic labeler, top application Zebra printer ZE500 Pneumatic, height-adjustable 900–2200 mm Label format: 150 × 110 mm Connection: 230 V AC / 50–60 Hz / 567 W Year of manufacture: 06/14 Dimensions (L × W × H): approx. 1000 × 1000 × 2300 mm Price: €3,900 net 1x LEGI-AIR 4050E – Side Apply Labeling System – Automatic labeler, side application Zebra printer ZE500 Pneumatic, height-adjustable 400–1500 mm Connection: 230 V AC / 50–60 Hz / 567 W Year of manufacture: 08/14 Dimensions (L × W × H): approx. 800 × 1200 × 1700 mm Price: €3,500 net Technical highlights of the LEGI-AIR 4050E series (according to the manufacturer): Modular design with a wide range of applicators (including tamp-blow) Dispensing rate up to 240 labels/min. (depending on format, text and stroke) Printing speed up to 400 mm/s Positional accuracy typically ± 0.8 mm Label sizes standardly approx. 12.5 × 7 mm to 160 × 210 mm (special formats possible) Nsdpfx Aijz Sbago Tswn Reduced compressed air consumption through modulated vacuum Made in Germany, robust for continuous industrial operation Terms of sale: Delivery and collection possible by arrangement. Location: 41564 Kaarst-Holzbüttgen. Documentation for the respective systems is available. We will gladly provide you with further information, pictures and detailed documents upon request. Inspection possible by arrangement.

Condition: reconditioned (used), Year of construction: 1994, machine/vehicle number: 941108, functionality: fully functional, total height: 2,520 mm, total length: 2,580 mm, total width: 1,000 mm, Compact dust extraction system with 3 chip collection bags – WITHOUT fan Nominal air flow rate: 5000 m³/h with existing fan – up to 7500 m³/h possible Filter area: 37.5 m² Filtration technology: AL-KO Opti-Jet system consisting of compressed air cleaning (sequence-controlled) and surface filtration Chip collection capacity: 8 solenoid valves Suction nozzle: DN 355 mm Compressed air connection: 1", compressed air, water and oil-free Minimum compressed air consumption 8.5 bar: 1140 NL/cleaning cycle Operating pressure: maximum 8.5 bar Fire extinguisher connection: 1 x 1 1/2" Dimensions WxD approx: 2572 x 981 mm Height approx: 2520 mm Weight without filter approx: 457 kg Nodpfxozqan Ho Ai Town JET cleaning: A pressure surge on the inside of the filter achieves effective cleaning of the filter hoses on the outside. Easy maintenance: large access doors facilitate filter maintenance, additional inspection covers High-quality filter material: oil and water-repellent surface coating of the filter, for problematic dusts (paint sanding dust, wet dust), filter washable Uniform bag filling: infinitely adjustable distribution flaps enable uniform bag filling Suitable fan: see item no. 7458 D=250 mm - 5000 m³/h extraction capacity With a fan D=350 mm, up to 7500 m³/h extraction capacity is possible!!!

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 0.14 kW (0.19 HP), input voltage: 230 V, type of input current: AC, volume flow: 1,890 m³/h, filter area: 7.9 m², noise level: 65 dB, actuation type: electric, total height: 575 mm, total length: 600 mm, total width: 590 mm, overall weight: 55 kg, Equipment: CE marking, documentation/manual, LTA electrostatic dust extraction system Intake on the right The intake nozzle can be screwed on as needed; currently, there is none, as it was previously mounted directly on the housing wall. In very good, fully functional condition, and naturally completely cleaned. Available for immediate delivery. Nwedpfxezqttcs Ai Tsn

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, total height: 3,500 mm, total length: 20,000 mm, total width: 2,500 mm, overall weight: 12,000 kg, Equipment: documentation/manual, The Modesta exhaust system is in good condition, is still installed, and can be seen in operation. It includes two automatic diverter valves, allowing you to choose whether to discharge into the bunker/silo or into two containers. Nedpfsx Ezlfox Ai Tewn

Year of construction: 2003, condition: used, Year of manufacture: 2003 Colour: Cream Empty weight: 1.000 kg Dimensions (LxBxH): 130 x 140 x 290 cm - Year: 2003 - CE marking present: Yes - Suitable for material: Metal dust - Capacity [m³/h]: 9000 - Main fan [pcs]: 1 - Main fan power [kW]: 7.5 - Connection diameter [mm]: 400 - Number of connections [pcs]: 1 - Options: Collection container, Control cabinet - Transport dimensions: 1300mm x 1400mm x 2900mm (l x w x h) Nedpfxeztbwhs Ai Tewn - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2024, new dust extractor Year of manufacture: 2024 For wood dust and chips, designed for commercial use Dust tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extraction and separation of dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models equipped with collision guard Dimensions (LxWxH): 1755 x 830 x 1800 mm Chip collection volume: 2 x 165 l Extraction inlet diameter: 200 mm Weight: approx. 259 kg Filter area: 22 m² Manual filter cleaning Sound pressure level: 72 dB(A) Nominal air volume: 2262 m³/h Nwjdpfx Ajzxu Tmsi Tsn Maximum air volume: 3700 m³/h Motor: 400 V, 3 kW Availability: short-term Location: Flörsheim

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors Nwedpfox I Aknex Ai Tjn -Manufacturer: Kemper, mobile welding fume extraction system type Eco M 3 x 400 V / 50 Hz -Drive: 0.75 kW -Max. volume flow: 1650 m³/h -Max. pressure increase: 2100 Pa -Extraction arm: Ø 150 mm x 5000 mm -Fan wheel: Ø 290 mm x 60 mm -Number: 2 welding fume extraction systems available -Price: per piece -Transport dimensions: 1200/800/H780 mm -Weight: 38 kg/pc.

Condition: used, Year of construction: 2003, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Nodpfx Aioywd I Ts Tewn Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall cabinet.Designed for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: good (used), Dust extraction blower, extraction, extraction system, dust extraction device, dust separator, filter system -Manufacturer: Zender, filter system cartridge filter with pneumatic filter cleaning -Inlet opening: Ø 390 mm -Outlet opening: Ø 390 mm -Note: filter unit only, without extraction fan Quantity: 1 piece available -Transport dimensions: 4000/1480/H1650 mm Nwodpfx Asy R S E Hsi Tjn -Weight: 700 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 22 A, type of input current: three-phase, volume flow: 6,920 m³/h, intake vacuum (max.): 2,630 mbar, suction capacity: 8,000 m³/h, intake manifold diameter: 350 mm, overall weight: 825 kg, Equipment: CE marking, documentation/manual, We are offering this very well-maintained FELDER RL 350 stationary extraction system, year of manufacture 2023, including all pipes and shut-off dampers. Serial number: 35.03.120.23 Rated voltage: 400.0 V Number of phases: 3 Rated current: 22.0 A Rated power: 11.0 kW Year of manufacture: 2023 Extraction port diameter: 350 mm Motor speed: 2,900 rpm Nominal volume flow (at 20 m/s): 6,920 m³/h Negative pressure at nominal volume flow: 2,630 Pa Weight: 825 kg Main fuse: 32 A Including silencer 5 electropneumatic slide valves and control system Extinguishing device included If you have any questions or require further information, please feel free to send us a message or give us a call. Njdpoytq Dxsfx Ai Tewn

Year of construction: 2026, condition: new, Airstreamer 580 – High-Performance Extraction System for Aluminium Chips The Airstreamer 580 is a powerful extraction system designed for aluminium chips, making it ideally suited for industrial applications. Its robust construction and mobile design with a removable chip container ensure flexible use and easy emptying. Technical specifications: ✔ Weight: 150 kg, mobile on castors ✔ Chip container: 170-litre capacity, easily detachable ✔ Filter: M-class polyester, antistatic version ✔ Pneumatic filter cleaning (compressed air connection required on site) ✔ Motor: 3.0 kW, 400 V, 50 Hz ✔ Suction inlet: 120 mm diameter ✔ Air flow: 2500 m³/h ✔ Nozzle pressure: 30 mbar Safety notice: Nwodpfx Aiepa Nw Ie Ten ⚠️ Certain types of dust and particles can be combustible, which may lead to filter fires or dust explosions. The operator is obliged to take appropriate measures to eliminate ignition sources and must comply with the relevant ATEX directives. ⚠️ This version is not ATEX certified. An ATEX Zone 22 version is available upon request. Optional accessories: 🔹 Super-flexible suction hose (120 mm), low-friction design 🔹 Antistatic kit for grounding all metal components on the vacuum 🔹 Remote start device 🔹 Cleaning set (60 mm) for floor and machine cleaning, made of PVC Includes floor and machine cleaning nozzles, 4 m suction hose, and adapter 🔹 Y-hose adapter (100 mm to 100 + 60 mm) with shut-off slide valve 🔹 XXL silencer for reduced working noise and increased efficiency The Airstreamer 580 offers a reliable and efficient solution for aluminium chip extraction in industrial manufacturing processes. We look forward to hearing from you! Plantec Maschinen GmbH

Condition: used, Bluhm Legi-Air 4050 RH Label Printing and Dispensing System Bluhm Legi-Air 4050 RH label printing and dispensing system with Zebra ZE500-4 print module The Bluhm Systeme RH Legi-Air 4050 is a powerful labeling machine with an integrated thermal transfer printer, ideally suited for automatic product labeling in production and logistics processes. The unit is equipped with a print module, applicator, control unit, and numerous interfaces, enabling precise and reliable label application. Motor-driven large roll unwinder Label rolls with a roll diameter of up to 430 mm and 900 meters of label material ensure long, uninterrupted production runs. A tandem operation ensures continuous production. Dispensing head Quickly interchangeable dispensing heads allow for the processing of label sizes from small identification labels to DIN A5-sized EAN128 shipping labels. The Quick-Change option enables format changes in seconds. Spring-mounted dispensing heads compensate for unevenness on product surfaces, ensuring that labels are applied cleanly. Control system Bluhm Weber standard controller Zebra ZE500-4 print module label printer Ideal for print and application labeling applications for products, cartons, outer packaging, and pallets in these areas: • Manufacturing and warehousing • Automotive industry • Pharmaceutical industry • Food and beverage production • Healthcare and beauty industry Standard features • Printing methods: thermal transfer or thermal direct • Orientation: right or left • All-metal industrial design • 16 MB SDRAM, 64 MB flash memory • Applicator interface • Transmissive and reflective media sensors • Multi-level Element Energy Equalizer™ (E3™) for high print quality • Real-time clock • Rotatable display • ZPL II™ – universal language for Zebra printers Media characteristics Labels Nwodpoibh Tkefx Ai Tsn Media thickness (label and liner) • ZE500-4: 0.135 mm to 0.254 mm Media types • Continuous, die-cut, or with a reflective mark Ribbons Maximum roll size • 101.6 mm outer diameter with a 25.4 mm core inner diameter Standard length • 600 m capacity Connectivity • Parallel interface: Centronics® compatible • Serial interface: RS-232 • USB 2.0 • Internal ZebraNet™ 10/100 • Applicator interface with DB-15F connector • Optional ZebraNet b/g print server Fonts/Graphics/Symbologies Fonts and character sets • Zebra Global Printing Solution including Unicode™ • Swiss 721 font standard • Bitmap fonts A to H and GS symbols can be expanded tenfold, regardless of height and width • Infinitely scalable Font Ø (CG Triumvirate™ Bold Condensed) can be expanded point by point, regardless of height and width • International character set IBM® code page 850 • With UFST® from Agfa Monotype Corporation • Firmware support for downloadable TrueType™ fonts • Additional fonts available Graphic features • Supports custom fonts and graphics, including custom logos and barcode symbologies • Supports all standard 1D and 2D barcodes Barcode symbologies • Supports all standard 1D and 2D barcodes Technical data Maximum print width • 104 mm Media specifications • Width of labels and liners: 16 mm to 114 mm • Minimum length with rewind: 13 mm • Minimum length without rewind: 6.5 mm • Minimum length in stream mode: 6.5 mm • Maximum length: 990

Condition: excellent (used), Year of construction: 2015, Dust extractor for capturing, conveying, and sorting all types of wood dust and chips from their sources, as well as extracting and separating settled wood chips and dust.
1 x Modular vacuum filter 9/4-30, 3 units. Fans: 2 x US-FHN 15kW
Conveyor device: 1 x rotary airlock NZRS 2140x665 Total volumetric flow: 30,000 m3/h Nwedoy Edxuspfx Ai Ton

Condition: good (used), Year of construction: 2011, Internal flange dimensions 2340 x 1340 mm Maximum panel dimensions (20mm thickness) 2340 x 1240 mm Working chamber height 60 mm Nedpstwba Ssfx Ai Tjwn Total thrust 300 t Maximum specific working pressure 5 kg/cm2 Press cylinders No. 6 diam 140 mm stroke 250 mm Lower moving platen (closing movement from bottom to top) Opening between press platens 230 mm Side load 1400 mm Pvc roller uncoiler Double loading table

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: RS 110-6-2 TF, functionality: fully functional, filter area: 660 m², total height: 10,400 mm, total length: 9,200 mm, total width: 2,500 mm, overall weight: 9,000 kg, Equipment: documentation/manual, Industrial Extraction System Venti Oelde, Spülluftfilter RS 110-6-2 TF, High-Performance System Airflow approx. 87,500 m³/h, 660 m² filtration area, year of manufacture 1997, incl. 3 high-performance fans, incl. ductwork, incl. air recirculation for approx. 70,000 m³/h, excl. spark extinguishing system. For sale is a powerful industrial extraction system by Venti Oelde, designed for an airflow of approx. 87,500 m³/h. The system has been in continuous operation and is suitable for use in larger industrial applications (e.g., wood processing, furniture manufacturing, operations with high chip and dust volumes). 👉 This is a complete central extraction system, not a standalone unit! Key Technical Data (excerpt) - Airflow: approx. 87,500 m³/h - Configuration: Central extraction - Year of manufacture: approx. 1997 - Application area: Industry / continuous duty - Robust steel construction - Built for heavy-duty continuous operation Scope of Delivery - Filtration system - Fans - Ductwork - Air recirculation unit - Steel frame / support structure Condition - System was operational until recently - Used, age-related, but solid industrial build quality - Inspection is explicitly encouraged Special Features - Very high air capacity – ideal for large-scale production facilities - Immediately available – no long lead times as with new systems - Heavy-duty construction – durable industrial technology - Attractive alternative to costly new installations - Dismantling support can be organized at extra cost!!!! Nwjdpjywflajfx Ai Tsn The offered machine is sold as a used system. Sale is conducted with exclusion of any liability for material defects. The machine is sold as inspected and excluding any warranties. The seller accepts no guarantee regarding the functionality, performance, or suitability for any particular purpose. Disclaimer All liability for material defects is excluded. This does not apply to damages arising from injury to life, body, or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Dismantling of the system is to be undertaken by the buyer at their own risk and expense. The buyer is responsible for all costs and risks associated with dismantling, loading, and transport. Transfer of Risk The risk passes to the buyer at the latest upon commencement of dismantling and/or loading. Other Information No liability is accepted for hidden defects. All information regarding the machine (e.g., year of manufacture, operating hours, technical data) is given to the best of our knowledge but without guarantee.

Condition: used, Year of construction: 2023, functionality: fully functional, Complete extraction system for the production line for log cutting LSH 350/4500. Commissioned in 01/2023. The equipment has no manufacturer, it consists of individual components. Configured based on calculations, documentation available. Nodpfx Aiexa Excs Tswn

Condition: used, functionality: fully functional, GGE Minisilos 7.5kw dust extraction unit Power: 7.5 kW Filter bag cleaning system 36 filter bags Filter bag diameter: 160 mm Filter bag length: 2000 mm Dust collection hopper with a capacity of 4.84 m³ Nwsdpfez Ahw Tsx Ai Ten Air recirculation to the hall is possible.

Condition: new, The devices from the AL-KO POWER VAC series are used wherever high suction power and a large air volume flow are required. Typical applications include chip extraction from saws in window manufacturing or direct extraction of milling chips on multi-head welding machines. Nwsdowwt E Uepfx Ai Tsn Functionality: A negative pressure of up to 10,000 Pa enables quick and safe extraction of chips and dust directly at the source. This ensures smooth production processes and consistently high product quality. The looped filters provide a high separation efficiency for both coarse particles and fine dust. It is also possible to connect a ductwork system to link multiple processing machines to the extraction unit. AL-KO POWER VAC devices are equipped with the proven AL-KO OPTI JET filter cleaning system and come standard with a control system featuring an integrated frequency inverter. This allows extraction performance to be adjusted at any time to meet operational requirements. Applications: - Cleaning suction of floors, machinery, and workstations in industrial and craft settings - Extraction from hand-held processing machines during grinding, milling, sawing, and deburring - Collecting dry dust up to dust class ST1, direct extraction from small processing and work machines Advantages: - High suction performance up to 10,000 Pa negative pressure - Optimal filter cleaning with jet pulse cleaning (AL-KO OPTI-JET®) - CLEAN dust barrier for improved cleanliness and health protection - Compact, modular design for minimal space requirements - Energy savings with standard frequency inverter for precise adjustment of extraction performance - Low operating noise – integrated silencer and sound-absorbing elements enable installation directly in the work area

Condition: good (used), NATUS (Micromed) BrainQuick Mobile Video EEG System – SD PLUS Research Amplifier (48 channels) (used) This high-performance, 48-channel EEG system combines flexibility, signal quality, and ease of use in a compact, mobile solution. (Price is per unit) Key Features: SD PLUS™ Research Amplifier (48 channels) – Supports up to 40 common reference channels with multiple auxiliary inputs Exceptional Signal Integrity – High-resolution acquisition with a sampling rate of up to 16 kHz Optimized for Demanding Environments – suitable for technical evaluation, signal analysis development, training environments, spare parts recovery, and other non-clinical applications. Intuitive Interface – User-friendly layout with customizable toolbars for live and review modes Flexible Layout Options – Switch between study type and workflow stage, or centric views Integrated Data Management Nwedpfozhicnsx Ai Tsn Quick Editing Tools – Make fast adjustments without leaving the current screen The buyer is solely responsible for determining legal permissibility, regulatory status, technical suitability, installation requirements, maintenance requirements, user training requirements, and lawful intended use in the destination jurisdiction prior to purchase and prior to any use. The seller makes no representation that this equipment complies with Regulation (EU) 2017/745, is suitable for putting into clinical service, or is lawful for clinical deployment in any specific country.