Used Modesta Fans Modesta Mx15/401 1997 for sale (3,423)

Condition: ready for operation (used), Year of construction: 1998, functionality: unexamined, total length: 1,860 mm, total height: 1,400 mm, total width: 950 mm, Thermal Shrink Tunnel HV 401 LD - Used unit, year of manufacture approx. 1998 - Tested and operational Itjdpfxey H Dtuo Anwjh The high-performance shrink tunnel is built in an energy-saving design. Thanks to its flexible heating system and adjustable settings, the machine can reliably shrink-wrap products of various contours with film. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable top and bottom heat. It is equipped with an electronic temperature control system and is designed for a maximum internal temperature of up to 250°C. The conveyor speed is infinitely adjustable. Technical data Passage width: 400 mm Passage height: 150 mm Hood length: 1,700 mm Conveyor length: 2,100 mm Rod conveyor: covered with Teflon mesh (as shown in the photos) Power supply: 380 V three-phase, 50 Hz Heating capacity: adjustable from 2 – 10 kW Rated connected load: 12 kW Color: light grey hammer finish Additional equipment: Temperature control with electronic controller and contactless relay for precise temperature stability

Condition: good (used), Year of construction: 2005, Manufacturer: Trane Type: CLCE 1810 Year: 2005 Overall dimensions: 3330 x 1900 x 2000 mm Suction side dimensions: 900 x 900 mm Fan: Manufacturer: Nicotra Type: VRE RDH 710 K1 Maximal drive power: 37 kW Maximal rev: 1700 1/min Electromotor: Itsdpfok Abw Tex Anwsh Manufacturer: Tee Electric motors Type: QU 200 L4C-40 H Electric power: 30 kW

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Itjdpfx Aeua Eu Nonweh Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h

Condition: used, Centrifugal fan, 18.5 kW, used machine Overall dimensions: 1680 × 1650 × 1260 mm Weight: 457 kg Electrical data: 400 V; 18.5 kW; 34 A Calculated air flow rate: 11,800 m³/h Calculated pressure: ~4500 Pa, 3.96 kg/s Isdpfx Aneyzypnswsth

Condition: ready for operation (used), Fan with Airflow Meter, Centrifugal Fan, Exhaust Fan, Used Equipment Itedpfovrzw Nex Anweh Manufacturer: Szellőző Művek Budapest Model: SZB-300T Year: 1979 Overall dimensions: 320 x 380 x 540 mm Weight: 37 kg Electrical specifications: 400V; 2.6 A; 0.6 kW

Condition: ready for operation (used), Centrifugal Fan, Fan, Fan 5.5 kW, Used Machine Overall dimensions: Length: 1710 mm Width: 1440 mm Height: 1660 mm Weight: 400 kg Electrical data: Itedovcax Hopfx Anwsh Voltage: 400V Current: 13.3A Power: 5.5 kW Motor specifications: Manufacturer: AEG Type: AMV 132 MV4/8 Blade dimensions: Diameter: 500 mm Width: 230 mm

Condition: used, Fan 2.2 kW, 5000 m³/h, exhaust fan, centrifugal fan, used machine Manufacturer: B és S Ventilátor Type: FVFH 450/500 Overall dimensions: Width: 790 mm Depth: 730 mm Height:980 mm Year of manufacture: 2017 Airflow: 5000 m³/h Electrical data: 400 V, 2.2 kW, 4.7 A Ijdpfxoypvclj Anwoth Pressure: 800 Pa

Year of construction: 2023, condition: new, functionality: fully functional, Offering a new direct-driven high-pressure fan from Helios, air volume 21,500 m³/h, motor 15 kW. Itedsy Ntw Uepfx Anwoh

Condition: excellent (used), belt driven Flow rate 14500 m3/h Negative pressure 3091 Pa Motor power 22 kW Speed ​​2340 rpm Suction DM 500 mm Itodpsh Tfqhjfx Anwsh Outlet DM 400 x 500 mm Dimensions L x W x H = 1800 x 1300 x 1250 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of technical data to list, so I have uploaded several photos with the basic specifications for you to get an overview of the saw’s capabilities. This is a rare model equipped with a feeder (individual lengths) from 0-2000mm, and for repeat operations from 2000-9999mm. Automatic zeroing before cutting. The CNC saw head features automatic rotation of +/-60 degrees, two types of lubrication (emulsion and direct spray application). You can select between ejection of cut pieces via a small parts ejector or by a chain ejector with a drop-down function for longer and heavier sections. The safety fence assembly with IC barriers and numerous spare parts are included with the saw (not shown in the pictures as it is not currently mounted). All original documentation is provided and corresponds to the machine's serial number, ensuring straightforward installation without guesswork. Iedpfx Ajyk Inponwjth Explanation of the issue: the saw is connected to electrical power and every individual function (of which there are many) works perfectly. The problem occurs during automatic operation, most likely due to program parameter issues (it uses the Windows platform). I have not found a suitable programmer willing to learn on my machine. Possible solution: I have contacted the saw manufacturer and they referred me to their authorized service provider, whose contact details I can supply to the prospective buyer. Estimated repair costs in Serbia range from €3000 to €5000; if you are closer to Germany or the Czech Republic, the expenses are significantly lower. Therefore, there are two price categories: if you purchase the machine as is, the listed price applies; if I resolve the issue, the price will be considerably higher. The listed price includes professional dismantling and loading onto the truck (a significant cost factor that is far from negligible); transportation is at the buyer’s expense. I hope this clarifies the current condition of the machine to some extent. Wishing you a successful purchase.

Condition: new, For sale: professional centrifugal fan/blower from the renowned German manufacturer Elektror Karl W. Müller. Iodjyuqr Espfx Anwsth The device is in unused, storage condition, featuring a robust industrial design suitable for ventilation and dedusting systems. Fan is used in: • Dedusting installations • Extraction systems • Ventilation systems • Wood and metalworking industries • Air transport systems Technical data • Manufacturer: Elektror • Model: 2D 07 • Power: 4.5 kW • Voltage: 400 V / 50 Hz • Speed: 2930 rpm • Capacity: approx. 94 m³/min (5,640 m³/h) • Pressure: approx. 1.2 kPa

Condition: used, used, in good condition, low hours Make: Schuko Model: L 400 Machine No. 0390 For shavings / wood chips Slow-running approx. 1400 rpm Motor: 11 kW Itodpfx Aeycxh Denweh Connection diameter: 400 mm Pressure approx. 1836 m³/h Air output: 11,760 m³/h Steel impeller Space requirement approx. 1100 x 800 x 1500 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: good (used), volume flow: 3.69 m³/h, power: 30 kW (40.79 HP), For sale is a tested radial fan from Pollrich, equipped with suction air control and a Siemens electric motor. Technical data: • Manufacturer: Pollrich • Motor: Siemens 30 kW • Airflow: 3.69 m³/s • Pressure: 4800 Pa • Speed: 3277 rpm • Max. speed: 3340 rpm • Medium temperature: up to 60 °C Itedoy El Iwspfx Anweh The blower is mounted on a sturdy base frame and is suitable for industrial extraction, conveying air, or process air applications. Condition: used, tested Voltage: 3 x 400 Volts Speed: 2940 rpm

Condition: good (used), Fan filter, fan array, air cooler, control cabinet fan, filter fan, server blower, server fan -Manufacturer: Arctic, Server cabinet fan with housing -Type: F8 915 -Voltage: 12 V -Number: 4 fans included -Price: per piece -Dimensions: 500/280/H90 mm -Weight: 1.7 kg/pc. Iodpfxey Ecdij Anwsth

Condition: good (used), Fan filter, fan array, air cooler, control cabinet fan, filter fan, server blower, server fan -Manufacturer: NMB, Control cabinet fan server fan with housing -Type: BG0903-B044-000 -Voltage: 12 V -Number: 8 fans available -Price: per piece -Dimensions: 500/280/H90 mm Itedpjy Eccxefx Anweh -Weight: 1.9 kg/pc.

Year of construction: 1995, condition: good (used), Radial blower from Venti Oelde with intake silencer. !! Characteristic as picture attached!! Volume flow: 46308 m3/h Pressure increase: 4830 Pa / 48.3 mbar Weight: 2750 kg Temperature: 30°C Speed: 1480 rpm Iodsd Nqlcspfx Anweth Engine: VEM 415 S4 Power: 110 kW

Year of construction: 2003, condition: excellent (used), 1 piece radial blower Manufacturer: Turbowerke Meissen Howden Model: LRN 0800 W 100/11 GR360 Volume flow: 56000 m³/h Pressure increase: 2000 Pascal at 20°C Isdekn H Izjpfx Anwjth Rotational speed: 1000 rpm Shaft power: 37 kW Weight: 1850 kg Year of construction: 2003 Dimensions: Width: 2400 mm Length: 1530 mm Height: 2040 mm Diameter suction side: 800 mm Shaft height without spring buffer foot: 1250 mm dimension pressure side: 700 x 700 mm including 360 ° rotatable suction side and transition including compensator for pressure side. No damage or wear. Frequency converter optional also possible.

Year of construction: 2007, condition: excellent (used), 1 piece Radial blower with pre-shaft and cooling disc for warm and also dusty air. Manufacturer: Scheuch GmbH Austria Model: vdk90 1000-fb14 Volume flow: 71060 m³/h Pressure rise: 1673 Pascal at 250°C (0,637 kg/m³) Rotational speed: 1460 rpm Shaft power: 40,5 kW Weight: kg Year of construction: 2007 Insulation with rock wool and galvanized sheet. Dimensions: Length: 3250 mm width: 2400 mm Height: 2000 mm Diameter suction side: 750 / 980 mm Shaft height without spring buffer foot: Dimension pressure side: 980 x 780 mm Isdpfx Aokvpfhenwsth including compensator for pressure side. No damage or wear. Only the color inside is off due to the heat.

Year of construction: 2022, condition: like new (used), We are offering this as-new Moro RH500/2, year of manufacture 2022. Manufacturer: Moro Model: RH500/2 Year of manufacture: 2022 Serial number: 05/22-01739/01-001 Weight: 270 kg Rated power: 15 kW Voltage: 400/690 V Frequency: 50 Hz Itodpfxoy Hppno Anwoh Speed: 2900 rpm Efficiency: 75.2% Orientation: LG270 If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: good (used), Euroventilatori XTTRC801LG0 Centrifugal fan Itsdpfxjtwdq Tj Anweh High output centrifugal fan, mounted on stand with 37Kw motor, 3Ph

Condition: used, Year of construction: 1997, Overview This rotary pressure filling machine was manufactured in 1997 by NATE. The Veral 60-12 is designed for the filling and closing of beer and carbonated beverages in glass bottles. The machine operates as a pressure filler with vacuum pre-evacuation, ensuring stable filling conditions for carbonated products. It has been fully overhauled in 2023, including reconstruction of filler, capper and vacuum pump. The machine is not yet in production after rebuild and is prepared for PLC and control system integration (not included).  Technical data Capacity: approx. 20,000 bph (500 ml) Formats: 0.5 L long neck / 0.66 L / 1.0 L Application: Filling of beer and carbonated beverages Configuration: 60 filling valves / 12 capping heads Filling system: Pressure filling with vacuum pre-evacuation Filling pressure: approx. 0.05 – 0.06 MPa Product temperature: approx. 1 – 7 °C Material: Stainless steel (AISI 304 / 316) Iodpfjy Azrtex Anwsth

Condition: new, Catalogue number x0192 TECHNICAL DATA Max. capacity 14600 m3/h Iodpfx Ansx Swrzewjth Max. compressed air pressure 4500 Pa Motor 15 kW Speed 2800 rpm Metal impeller 6 blades Extraction port diameter 325 mm Dimensions (L/W/H) 900/880/1050 mm Weight 265 kg – New device Option to purchase a reduction adapter at an additional cost. Net price: 9600 PLN Net price: 2290 EUR (based on the exchange rate of 4.2 EUR) (Prices may change subject to significant exchange rate fluctuations)

Condition: used, saw blade diameter 400 mm capacity 90 degrees: round 110 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 200x60 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 140x60 mm Itodjd Iinxjpfx Anwoh total power requirement 1,5 kW weight of the machine ca. 130 t dimensions 0,8 x 0,7 x 1,3 m SPECIAL PRICE!! Underfloor aluminum circular saw, hydropneumatic semi-automatic. · Maintenance unit for pneumatic control · Turntable with ball bearings · Suction nozzle for chip extraction system · 2 pneumatic vertical clamps · Rotation range 180° · Movable rear material stop = enlargeable cutting area · Saw blade feed continuously adjustable · Two-hand safety control Horizontal vices (option) · Mist spray device for cooling emulsion · Engine braking · Machine base · The use of our B & S Coolmatic Plus is mandatory for profile cuts necessary . Optional saw blade

Year of construction: 2018, condition: excellent (used), Technical datas: Iedefl Uagspfx Anwsth - Max. volume flow: 4500 m3 / h - Motor power: 2.2 kW - Speed: 1/1410 rpm - Connection: d = 450 mm

Year of construction: 1992, condition: good (used), Air capacity: 30,400 m3 / h Engine power: 33 kW Static pressure: 3100 Pa Speed: 1600 rpm Itedpfxjh A Rrrs Anwoh