Used Mosca Automatic In-Line Strapping Machine for sale (85,407)

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Iedpfxofibfaj Acgjau Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Iaodpfx Acjfh R Tyjgou Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO Iodpexdr Rtofx Acgeau - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Iajdpoxdr Swefx Acgou Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. The machine has seen very little use, is fully operational, and is in good overall condition. Manual and original documentation are available.

Condition: new, Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMG162, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 400 mm/s, Komfi Laminator Amiga 52I (Intelligent In-Line Feeding) New, Manufactured 2020 Specifications: Max. speed of lamination: 25 m/min Max. output: 8000 sheets/h Min. sheet dimensions: 200 × 250 mm Max. sheet dimensions: 560 × 800 mm (or up to 1016 mm) Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0) / Max 1.4 mm (with overlap < 0) Max. paper pile: 6 cm (depending on sheet length) Thickness of laminating film: 24-50 μm; OPP, PET, Nylon Sheet overlap accuracy: ± 1 mm Feeder: Intelligent In-Line Feeding (connection with the PRinter) Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Iedezb Db Hepfx Acgoau Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: new, Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMG161, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 400 mm/s, Komfi Laminator Amiga 52I (Intelligent In-Line Feeding) New, Manufactured 2021 Specifications: Max. speed of lamination: 25 m/min Max. output: 8000 sheets/h Min. sheet dimensions: 200 × 250 mm Max. sheet dimensions: 560 × 800 mm (or up to 1016 mm) Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0) / Max 1.4 mm (with overlap < 0) Max. paper pile: 6 cm (depending on sheet length) Thickness of laminating film: 24-50 μm; OPP, PET, Nylon Sheet overlap accuracy: ± 1 mm Feeder: Intelligent In-Line Feeding (connection with the PRinter) OTF: Built in Over Toner Foiling unit Laminating Unit: Teflon Coated Rubber Roller Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Iedpozb Da Ajfx Acgoau Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: excellent (used), Year of construction: 2011, Fully automatic Rösler dual-stream cleaning system, automated with industrial robots, cleaning chambers with 2 blowers each, each with 2 loading/unloading containers, year of manufacture 2011, including a wet separator. Ijdezb Dqhjpfx Acgoau

Condition: good (used), Manufacturer: MOSCA, Model: RO-M-P2, Year of manufacture: 1997, Serial No.: 46957 Ijdpfx Acey Ez Tiogjau

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MV-117894/D, saw blade diameter: 400 mm, total length: 8,000 mm, total height: 1,900 mm, total width: 1,000 mm, overall weight: 1,000 kg, KALTENBACH SKL 400 EC-H cold circular saw automatic (completely overhauled) - Max. cutting width: 4 mm - Saw blade arbor bore: 50 mm - Number of mounting bolts: 4 pcs - Bolt circle diameter: 80 mm - Saw blade feed rate: 0 - 3000 mm/min - Rapid return: 4500 mm/min - Adjustable travel of workpiece stop: 70 mm behind and 40 mm in front of the biometric zero point = 110 mm - Stepless manual rotary table adjustment: 90° This is a completely overhauled machine. Specification: Dosing system MS-2 C, infeed roller conveyor T3: 4 m, infeed roller conveyor T3, outfeed roller conveyor T3 with L45D length measuring device Note: This item must be collected on a binding date between July 7th and July 9th, 2026 (exact date to be coordinated). Iodpfxey Dcqye Acgjau FCA D-71263 Weil der Stadt - loaded onto truck

Condition: used, Year of construction: 2001, saw blade diameter 350 mm 190 mm speeds 15 / 30 / 45 / 90 U/min Isdpfxjyvvpme Acgoau power requirement 1,8 / 2,6 kW kW

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 2024-A00280, feed length X-axis: 10,000 mm, feed length Y-axis: 4,000 mm, feed length Z-axis: 100 mm, warranty duration: 12 months, total length: 11,000 mm, total height: 2,000 mm, total width: 4,500 mm, overall weight: 2,500 kg, type of input current: three-phase, Equipment: CE marking, Semi-automatic framing machine for timber frame walls, max. 4000x10000mm - Max. stud height: 220mm Iaedpfx Ajzap I Aecgeu - 3 nailing positions along the height - 2 BEA nail guns, strip-fed nails - Wall length production: 1000mm to 10000mm - Wall width production: 600mm to 4000mm - Wall height production: 120mm to 220mm - 2 independent nailing stations (no beams) - HIWIN rail and guide system - LENZE motor - LENZE PLC - Human-Machine Interface (HMI) - Control panel - Manufacturer's warranty: 12 months - Installation and commissioning possible

Condition: excellent (used), Year of construction: 2020, operating hours: 2,450 h, functionality: fully functional, cutting width (max.): 1,270 mm, cutting length (max.): 1,680 mm, type of input current: three-phase, cutting height (max.): 50 mm, Equipment: safety light barrier, ESKO Kongsberg X20 Light Sign (instalata in februarie 2020 si cu 2450 ore de functionare) - Working area 1680x1270 mm, - Incl. basic X20 starter table, felt cutting underlay, shipping crates, - FlexiHead with 3 insert positions, - 6kW vacuum pump, PC & iPC Sign Standard, camera. - Table mains 230V - Pump mains 3 x 380 V - iCut Production Console software Tools : - Basic Folding Carton Kit - Multi Purpose High Frequency(MP-HF) Knife Tool (for cutting corrugate cardboard) - Folding carton crease tool (15mm) incl crease wheels - Crease Tool (60 mm for creasing corrugate cardboard) - Psaligraphy knife tool, incl. 2x SR6150 and 2x SR6151 blades - Rigid Material Knife tool (for 8mm knife blades) - KissCutting Knife tool (incl 6x sign foil knife bl) - Incl 2 different pressure springs; - Incl 3xKC101+3xKC102 knife blades; Ijdozdk Iwopfx Acgoau - Removable&adjust.depth control cup; - Hand tool for knife blade change

Condition: used, The automatic liquid filling machine is plastic (PET) or glass bottles (bottles) for filling with liquid. 9 charging heads, Siemens PLC control. The previous owner Iaedpfjhcxcmjx Acgeu detergent used to charge. Requires electrical installation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 200 V, Mitsui precision grinder, surface grinder manufacturer Mitsui MGG CO.LTD type: MSG-250H2 year of manufacture:1990-6 Table width: 200mm Table length: 480mm Table longitudinal movement, maximum: 520mm Table lateral movement, maximum 250 mm Table movement: 5-20m/min Forward-backward feed: Per revolution: 6 mm Per scale: 0.02 mm Lateral feed: Per revolution: 6 mm Per scale: 0.01mm Grinding spindle speed: 2900 rpm 50 Hz Table total length: 1385x285 mm Magnetic table: 300x130x100 mm Coolant unit, Maximum height from table surface to center of grinding wheel axis: 400 mm Grinding wheel diameter, standard: 205mm Grinding wheel width: 20mm Wheel spindle speed: 2900 rpm 50Hz Iedswviaropfx Acgoau Grinding wheel bore diameter: 31.75mm Electrical power: 2 HP 1.5 KW 4P 200V 3 phase Weight, approx.: 1105 kg

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm Iaedpfokn Rz Hex Acgeu "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, The Strapex SMA automatic strapping machine uses 12 mm strapping tape for goods up to 35 kg and is designed for strapping small and medium-sized packages. Manufacturer STRAPEX SMA 30 Year of manufacture: 2011 Performance per minute: 24 cycles per minute Feeder position: Side Package size 780 x 600 mm - Minimum package size 100 x 30 mm - Fully automatic Heat sealing: Yes - Power: 0.75 kw 230 V/50 Hz, - Machine dimensions 1417 x 630 mm, height 813 mm - Machine weight: ca 200kg Isdpfx Acequtchogeau

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 09020018, input voltage: 230 V, pneumatic connection: 5.5 bar, Description: For sale is a VIBEMAC 3022 WB 406-1CS industrial waistband sewing machine, offered as a complete workstation. This Italian-built unit is specifically designed for high-precision waistband attachment and reinforced seam operations in denim, trousers, and workwear production. The machine produces strong and consistent chainstitch seams and is widely used in professional garment manufacturing environments. The unit has been in production use and was fully operational until factory shutdown. The machine has been video recorded in full working condition on 01.04.2026. VIBEMAC machines are known for their durability, precision, and long operational lifespan, making them a preferred choice in denim production. Key features: Ijdpey Ipnaofx Acgeau • Automatic waistband sewing system • Chainstitch seam for strong and flexible stitching • Suitable for heavy fabrics (denim, workwear) • Consistent seam quality and high repeatability • Designed for continuous industrial use • Integrated feeding system for stable material handling Includes: • VIBEMAC 3022 WB 406-1CS sewing machine head • Integrated motor and drive system • Industrial worktable and steel stand • Foot pedal control • Thread stand and guides • Integrated control panel Technical details: • Manufacturer: VIBEMAC S.p.A., Italy • Model: 3022 WB 406-1CS • Year: 2009 • Stitch type: Chainstitch • Needle system: 62x57 F120 • Power: 220 / 380V Condition: • Used industrial condition • Fully operational prior to factory shutdown • Video recorded in operation (01.04.2026) • Recently serviced (27.02.2026) • Typical signs of use from production environment • Sold as-is, where-is, without warranty Typical applications: • Waistband attachment (jeans, trousers) • Reinforced seams • Heavy-duty garment production Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Showroom machine from the manufacturer! Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Calendar collating machine Type - MKW RAPID UT - System Belt conveyor table 20 - Number of stations B3 - Format 35 x 50 cm / 13.78" x 19.68" GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 20 stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm Iaodpey U Hdlefx Acgou - Sheet sizes 3.94" x 5.51" up to 13.78" x 19.68" - High-Pile version with max. 70 cm / 27.55" stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Clocked blown air for accurate sheet layering - Electronically adjustable sheet layering - Electronic machine control by Industry-PC system - High quality 15'' color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Delivery control system for criss-cross with adjustable set interval - Transport table lighting with LED-Lamps - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PC - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated DSS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - LED signal lights to visualise the information of each station SOFU-HIVIS incl. (enables simple status detection) Alternative to Jogger: 1 High-Pile delivery Type MKW RAPID HA 350-UT / PN + T-BELT - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Pneumatic drive unit for staggering of sets - Automatic delivery on to buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Subject to prior sales Detailed offer on request

Condition: used, Year of construction: 1991, machine/vehicle number: 113307651086088, functionality: fully functional, cutting height (max.): 260 mm, total height: 2,100 mm, total length: 2,200 mm, total width: 2,100 mm, saw band length: 4,115 mm, saw band width: 38 mm, The Kasto SSB 260 VA is a fully automatic bandsaw machine designed for precise serial cuts of solid material, pipes, and profiles. It stands out for its compact design and high cutting accuracy. The machine features hydraulic workpiece clamping, automatic feed, and a coolant system. Additionally, a chip conveyor is integrated to increase efficiency. Cutting range round: 10 – 260 mm Cutting range square: 260 x 260 mm Smallest cut-off length: 5 mm Iasdpfxowqw Tvj Acgsu Single feed: 600 mm Multiple feed: max. 5,400 mm Cutting speed: 15 – 125 m/min (stepless) Saw blade dimensions: 4,115 x 38 x 1.3 mm Drive power: 4 / 6.5 kW Machine weight: 2,110 kg Machine dimensions (LxWxH): approx. 2,160 x 2,080 x 2,015 mm

Condition: used, Year of construction: 2008, 1 x used cross-wrapping machine Manufacturer: Mosca Iasdpoy Uc Tiofx Acgeu Model: RO-TR 600-4 Year of manufacture: 2008 Condition: good and fully functional prior to dismantling; it was used in conjunction with a 16-color rotary offset printing press.

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Iaedpofym Ewsfx Acgeu Make KASTO Type:V350 U Year 1998 with mitre cut, roller conveyor and stop Saw blade dm.350mm Pneumatic vice and saw feed Stepless. Machine little used in good condition.

Condition: used, Year of construction: 2022, The MAG 1 Peroni Ruggero is a modern, semi-automatic machine designed for manufacturers of premium packaging, magnetic boxes, and exclusive cardboard packaging. The machine combines several operations in a single work cycle, significantly increasing production efficiency and ensuring the highest precision. The machine performs milling of slots in solid cardboard, automatically applies hot-melt adhesive, and inserts magnets or metal plates into the prepared locations. This ensures that the entire process is fast, repeatable, and requires minimal operator intervention. The material is fed manually, while all key production steps are carried out automatically. An advanced positioning system guarantees accurate placement of the components, which translates into high-quality finished products and aesthetically pleasing packaging. The MAG 1 allows the application of 1 to 6 magnets or metal plates on one side of the packaging in a single work cycle, providing high production flexibility and the ability to handle diverse projects. The machine has been used sparingly and is in very good technical and visual condition, ready for immediate use in a production facility. Key benefits: - Milling, gluing, and magnet application in a single work cycle - Handles 1 to 6 magnets or metal plates simultaneously - High precision and repeatability of the process - Dedicated to the production of magnetic boxes and premium packaging - Automatic application of hot-melt adhesive - High efficiency with limited operator intervention - Very good technical and visual condition - Year of manufacture: 2022 Ijdpfezbtpgjx Acgeau Technical data: - Manufacturer: PERONI RUGGERO - Model: MAG 1 - Year of manufacture: 2022 - Serial number: 007 Supported materials: - Solid (gray) cardboard with a thickness of 1.5 to 4 mm - Magnets with a diameter of 9.5 to 15 mm - Magnet thickness: 1 mm, 1.5 mm or 2 mm - Range of processed element: - Minimum width: 180 mm - Maximum width: 1550 mm Performance: - Up to 14 cycles/min when applying 1 magnet - Up to 8 cycles/min when applying 2 magnets Technical parameters: - Power: 5 kW - Compressed air consumption: 150 NL/min at 6 bar - Machine dimensions: - Length: 2500 mm - Width: 2500 mm The MAG 1 is an ideal solution for manufacturers of premium packaging who want to automate the magnet application process, increase production efficiency, and achieve the highest quality of finished products.

Condition: used, Sawing machine, automatic saw, automatic cutting machine, Adige CM501 – used machine Manufacturer: Adige Model: CM 501 Year: 1996 Blade diameter: 250–360 mm Ijdpfx Acoy Ayc Djgoau Cutting length: 2100 mm Max. workpiece diameter (round): 85 mm Max. workpiece size (square): 70 × 70 mm The ADIGE CM501 automatic circular sawing machine, manufactured in 1996 in Italy, is designed for fully automatic cutting of solid materials, tubes, and profiles made of steel, brass, aluminium, and other light alloys in industrial production environments.

Condition: used, machine/vehicle number: 008601, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 6 No of Top Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes Iasdezbrnhjpfx Acgsu

Condition: used, machine/vehicle number: 008406, Max. panel width: 1000 mm Iedpsyl Ihxofx Acgsau Max. panel length: 2500 mm No of injectors: 12