Used Muratec Mt 100 for sale (29,516)

Condition: used, This listing is for a Amersham Biosciences AKTA Purifier 100 / FRAC-950 Fraction Collector Lhodexzgtqopfx Amzen

Condition: used, REPEATED ITEM Garner Denver maybe Elmo Rietschle V-VTA 80 vacuum pump V-VTA pumps developed by Elmo Rietschle for continuous operation for printing and paper handling machines. V-VTA pumps come with bearings on both sides of the rotor. Flange mounted motor with bolt coupling. V-VTA offers high efficiency, silent operation, easy to operate and service. Sound cover allows a ducted cooling air outlet either from one side only or from both front and back. Also infomration on this site SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFPR017 Lhsdpexziatefx Amzen Listing name: GARNER DENVER VTA 80 C 100 Vacuum Pump

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2460068, power: 1.5 kW (2.04 HP), load capacity: 200 kg, lifting height: 7,850 mm, platform length: 1,110 mm, platform width: 930 mm, overall weight: 2,650 kg, tire size: 0,41 x 0,13 m, color: red, transport length: 2,800 mm, transport width: 990 mm, transport height: 1,990 mm, Equipment: UVV, Technical specifications Year of manufacture: 2016 Motor: Electric (2 x 1.5 kW) Working height: 9.85 m Platform height: 7.85 m Lodpfxeyqzfbe Amzshn Max. lateral outreach: 3.15 m Basket capacity: 200 kg Upper carriage rotation: 350° Platform dimensions (L x W): 1.11 m x 0.93 m Overall dimensions (L x W x H): 2.80 m x 0.99 m x 1.99 m Boom length: 1.50 m Weight: 2,650 kg Climbing ability: 25% Travel speed: 0.65 km/h - 5 km/h Fully operational, general signs of use

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2460348, power: 1.5 kW (2.04 HP), load capacity: 200 kg, lifting height: 7,850 mm, platform length: 1,110 mm, platform width: 930 mm, overall weight: 2,650 kg, fuel type: electric, tire size: 0,41 x 0,13 m, color: red, Equipment: UVV, Manitou 100 VJR Telescopic Mast Lift Technical Specifications: * Working height: 9.90 m * Platform height: 7.90 m * Load capacity: 200 kg * Overall width: 0.99 m * Overall length: 2.82 m * Overall height: 1.99 m * Weight: 2,650 kg Equipment: * Proportional control joystick * Drive possible at maximum outreach * Audible warning signal and indicator light for tilt and overload * Integrated battery charger * Manual emergency lowering * Negative brake * Audible warning system in the work basket * Hour meter * Battery charge indicator * Crane lugs * Integrated diagnostics system * Non-marking tires * Work platform with anti-slip perforated floor * CAN-BUS technology * Toolbox in the work basket Optional features available: * New CE inspection (UVV) * Removal of our company decals * Custom paintwork and decals on request * New batteries Lhedpsyqyg Dofx Amzon * Warranty * New service * Delivery within Germany

Condition: used, Palox tipper 120 x 100, made of standard black steel Lhodoxn U Nmjpfx Amzsn

Condition: used, Year of construction: 1998, pressing force: 100 t, For sale is a used die-setting press from the manufacturer REIS with a maximum pressing force of 100 tons. The machine has a table size of 1,100 × 800 mm, a maximum installation height of 950 mm, and numerous features, including an ejector in the table, oil connection boxes for core pulls, and a 180° pivoting ram plate. It is therefore particularly suitable for die-setting operations, tool try-out, and testing in mold and tool making. ##### Technical Data + Information: Die-setting press – 100 tons – 1,100 × 800 mm ==== General Information - Design: 4-column die-setting press - Manufacturer: REIS - Type: TUS 80–100 - Year of construction: 1998 - Pressing force: 26–100 tons (adjustable) - Retraction force max.: 45 tons Lhodpfxoxd Tiqs Amzon - Table size: 1,100 × 800 mm - Max. table load: 5,000 kg - Installation height max.: 950 mm - Overall dimensions (W x D x H): approx. 2,100 × 3,395 × 3,670 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm ==== Hydraulic Cylinder - Pressing force range: 26–100 tons - Retraction force: 45 tons ==== Hydraulics & Drive - Hydraulic pump: REXROTH SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Working pressure max.: 200 bar - Pressure accuracy: ±5 bar - Tank volume: 200 l - Hydraulic oil: HLP 36 ==== Motion System - 180° pivoting ram plate - Load capacity of the pivoted ram plate: up to 3 tons - Ejector in the ram: 3.5 tons - Ejector stroke: 130 mm - Extendable table - Table can be tilted to both sides - Movable ejector in the table - Oil connection boxes for core pulls - Injection molding filling device in the ram - Quick clamping plate on the ram ==== Control - Operation via control panel - Press force setting - Operation of core pulls - Control: Siemens / Pilz - Digital measuring device ==== Safety - Industrial machine control - Operator panel with safety functions ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 7.5 kW - Total connection power: 10 kW ##### Application areas: Die-setting, tool try-out, mold making, tool making, injection molding tools, automotive, prototype construction, trial tools, maintenance, production preparation (Die-setting press, try-out press, tool try-out press, hydraulic press, REIS TUS 100, 100 ton press, 4-column press, testing press, mold making press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety standard NR 12, which is based on these. Our core strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: used, Haffner SL100 door lock milling machine for simultaneously: Milling out the lock case using a chain cutter Milling out the lock faceplate using a faceplate cutter Drilling out the handle and keyhole using a drill bit. Technical data: - Chain cutter motor: 1.7 kW - Rebating cutter motor: 0.6 kW Lodpsztvw Nofx Amzohn - Drill motor: 0.25 kW - Blade length: 150 mm - Chain width: 12–17 mm

Condition: used, Year of construction: 1991, Technical details: spindle diameter: 100 mm x-travel: 5020 mm y-travel: 1000 mm z-travel: 2000 mm control: Heidenhain 415 B tool taper: SK 50 • For sale without floor plate. • Equipped with an indexable universal milling head, adjustable in 2.5° increments. • 60-position automatic tool changer. • Including Scharmann rotary table (rotation function defective – sold with this known defect). • Rotary table size: 2,500 × 2,000 mm. Lsdpfxjzk Ezro Amzohn • The machine can be inspected under power at its location in Saxony, Germany, by appointment upon request. *

Condition: used, functionality: fully functional, Year of construction: 1989, For sale: TRUMPF MINIMATIC 100 punching machine. Lightly used, in excellent condition, and comes with many tools. The machine is connected and can be tested. We can provide training on how to use the machine; all instructions are available. Specifications: Make: TRUMPF MINIMATIC 100 Made in: Germany Year: 1989 Capacity: 15 T / 150 kN Other: Automatic 9-tool changer Weight: 5T Lhjdpey Udrmsfx Amzon If you have any further questions, please do not hesitate to ask.

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm Lhsdpfxsu Nfizo Amzsn mortise hole in ram: Ø 36 mm table surface area: 900x640 mm ram adjustment: 150 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Lhodpfx Aoy Hkd Hjmzon Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,750 mm, table load: 5,000 kg, spindle diameter: 100 mm, spindle speed (max.): 1,120 rpm, table length: 1,500 mm, table width: 1,500 mm, feed length W-axis: 900 mm, workpiece weight (max.): 5,000 kg, The last conventional machine standardly produced by TOS VARNSDORF Solid design Also available in CNC version RET100B and the overhauled machine W100A-R MAIN PARAMETERS Workspindle diameter 100 mm Clamping taper 50 ISO Lhedpfjfk I Niex Amzen Spindle speed range 1120 rpm Table transversal travel (X) 1600 mm Headstock travel (Y) 1120 mm Table longitudinal travel (Z) 810 / 1250 / 1750 mm Spindle stroke (W) 900 mm Table clamping surface max. 1500 x 1500 mm x mm Table loading capacity max. 3000 kg

Condition: used, Feutron Type: 3702/06 Water-cooled climate testing chamber Technical data: Test chamber nominal volume: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Lodpfxezd Sdme Amzshn Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 3,953 h, load capacity: 1,000 kg, lifting height: 6,750 mm, fuel type: electric, mast type: triplex, construction height: 2,857 mm, fork carriage width: 560 mm, fork length: 1,150 mm, empty load weight: 3,716 kg, total length: 2,000 mm, drive type: Elektro, construction width: 1,250 mm, High-lift order picker Load center: 600 Mast type: Triplex Drive: AC Technical condition: good Front tire type: Solid tires Front tire size: 2 x BA Front tire condition: Not present Rear tire type: Solid tires Rear tire size: 1 x BA Rear tire condition: Not present Battery voltage: 48V Battery capacity: 620Ah Battery year of manufacture: 2016 Lhsdsz Sif Rjpfx Amzen Battery, charger

Condition: used, Espec Type: TSD-100 Lhedpfszizl Rjx Amzsn New evaporator installed in February 2026 100-liter usable volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hour counter Mobile design 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), mileage: 29,083 km, power: 57 kW (77.50 HP), first registration: 08/2022, fuel type: electric, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 3,280 mm, fuel: electricity, color: white, driver cabin: day cab, gearing type: automatic, number of seats: 3, total length: 5,350 mm, total width: 1,850 mm, total height: 1,900 mm, loading space length: 2,600 mm, loading space width: 1,580 mm, loading space height: 1,300 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional options and accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Fabric - Partition = Notes = Configuration: 4x2, Unladen weight: 2128 kg, Gross vehicle weight: 3055 kg, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assist: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Color: White, Heated mirrors, Type of lighting: Halogen lamp, Air conditioning, Bluetooth, Engine power: 57 kW (76 hp), Fuel: electric, Type of gearbox: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, L3H1 75 kWh Long Range Snelladen Airco PDC Rear doors Automatic 136 hp!, Tire type: All-season tires = Additional information = General information Number of doors: 1 License plate: KLEYN1 Axle configuration Tire size: 215/65R16 Lhodpfsz Nd E Eox Amzjn Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 2,128 kg Payload: 927 kg GVW: 3,055 kg Functional Loading platform height: 60 cm Maintenance APK (Technical inspection): valid until 11.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €383 per month (van, 72 months); Please inquire for further information and conditions.

Condition: new, STRUERS Grinding and Polishing System Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: Lhjdpfxjz Srm Nj Amzjn 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0085, pressure: 6 bar, power: 895 kW (1,216.86 HP), temperature: 120 °C, Viessmann Vitoplex 100, 895 kW. Lsdpfjz Uikksx Amzehn

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, lifting height: 10,000 mm, first registration: 06/2019, General information Year of construction: 2019 Operating hours: 2.180 Registration number: TPT-65-L Technical information Number of cylinders: 4 Engine type: Deutz TD 3.6 L Empty weight: 7.360 kg Dimensions (LxBxH): 499 x 234 x 230 cm Functional Lifting capacity: 3.000 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Mudguards - Pallet forks - Quick change - Roadworthy - Support legs - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IV / Tier IV final General Country of production: Frankrijk Lodoz Ru Ndjpfx Amzjhn Dutch license plate, Original 2,180 operating hours, Pallet forks, Stabilizers

Condition: excellent (used), CATALOGUE NUMBER 7751 TECHNICAL DATA - track width 250mm - working width of the roller 250mm - max. disc diameter 300mm - disc bore diameter 60mm - max. cutting height 100mm - table width with extension 520mm - table length 1580mm *from above: Ledpozr Izkjfx Amzshn - pawls, 2 rows - sliding roller, metal, pressure roller - roller with saw blades - smooth sliding roller, metal, sliding roller *from below: - sliding roller - guide strip - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor 0.75kW - main motor 15kW - diameter of dust extraction nozzle 200mm - overall dimensions L/W/H 1640x1400x1550mm - weight 1000kg ADVANTAGES – Italian made – very good condition – used multi-blade saw Net price: 32900 PLN Net price: 7651 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: new, Lateral guide, type ZF 100, track length 2m, zinc-coated on both sides. * Zinc-coated C-profile * For handrails up to a guide height of 100 mm * Adjustable * Further technical characteristics: Surface: zinc-coated Lhjdpfo Abuzgox Amzsn Surface: zinc-coated Design: on both sides Track length: 2 m

Condition: new, Side guide, type ZF 100, track length 3 m, zinc-coated on both sides. · Zinc-coated C-profile · For mounting on support rods up to a guide height of 100 mm · Adjustable Lodpfx Ame Abuztozshn · Other technical features: surface: zinc-coated Design: on both sides Surface: zinc-coated Track length: 3 m

Condition: new, Piston rod guide, Ø 100/60 Lodpfx Aj Abhpkjmzshn Alø: 100 mm Packaging quantity: 1 F: 12 mm Thread G: M105x2 Packaging unit: piece Dø: 114 mm Sø: 60 mm A: 70 mm

Condition: new, Description The R-100 STANDARD wood chipper is specifically designed for shredding branches with a diameter of up to 9 cm. Developed and manufactured from the outset in the REMET CNC Technology factory, this wood chipper is characterized by a welded, fully disassemblable construction that ensures the rigidity and strength of the entire machine. The precise cutting mechanism, manufactured using CNC machines, is distinguished by its high quality, accuracy, and coaxial drive, which ensures the long service life of the machine and its components. This high-quality workmanship ensures that the R-100 STANDARD operates reliably even under demanding conditions. In addition, this model is equipped with a foldable conveyor belt with a length of 2.3 m. The conveyor belt can be used to discharge material to the right or to the rear in the direction of travel, allowing for flexible adaptation to various working conditions. This versatility makes the R-100 STANDARD an excellent choice for various applications in wood processing. Technical data Min./Recommended power 15/25 HP Weight 145 kg Max. cutting diameter (fresh softwood) 90 mm Max. cutting diameter (fresh hardwood) 80 mm Lhjdpfx Amj Abpvxozon Max. cutting diameter (dry hardwood) 70 mm Cutting blade material Wear-resistant steel with increased hardness Infeed hopper 62/38 cm Mounting system Three-point linkage Trailer coupling pulling force 1000 kg Cutting length (6 blades) 7-14 cm

Condition: new, Multifunctional product, 100 ml spray can, WD-40 · Five products in one! Rust remover · Lubricant · Contact cleaner Ljdpfx Aj Abxw Esmzehn · Corrosion protection · Cleaner ·silicone-, resin- and PTFE-free · penetrates rust layers, loosens stuck mechanisms and seized vehicle and machine parts · removes stubborn dirt, displaces moisture from electrical contacts and prevents leakage currents · leaves a thin protective film that prevents the formation of new moisture and rust on metal parts Packaging: Spray can Contents: 100 ml