Used Mw Double Grinding Machine for sale (73,038)

Condition: used, Year of construction: 2019, Calibration grinding machine Manufacturer: Lingi Jianzhong Type: BSG2613C Year of manufacture: 2019 Technical data - Maximum working width: 1300 mm - Processing thickness: 5-80 mm - Processing length: 780 mm - Processing accuracy: 0.08 mm - Dimensions of the grinding belt: 1350x2800 mm - Grinding belt speed: 31 m/s - Roller diameter: 2x 320 mm - Total power: 165 kW - Main motor power: 2x 75 kW - Feed motor: 11 kW - Lifting motor: 2x 0.75 kW - Brush motor: 2x 0.75 kW - Feed speed: 10 - 30 m/min - Operating air pressure: 0.5 - 0.8 MPa - Volume of the dust extraction container: 24000 m³/h - Weight: 14.5 t Nledjzuzc Topfx Aa Ref - Overall dimensions: 3100x2100x3000 mm - Voltage: 380V 50Hz Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2006, - Max. working width: 1100 mm - 3 grinding units Nledpfx Aszuzcaja Rsf Grinding machine Manufacturer: CB Levigatrici s.r.l Type: Year of manufacture: 2006 Technical data - Max. working width: 1100 mm - 3 grinding units - Voltage/frequency: 400 V / 50 Hz - Total power: 48 kW - Rated current: 94 A - Weight: 2460 kg Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1998, - Belt width: 300 mm - Belt length: 1800 mm - Max. working height: 200 mm - Feed rate: 6 / 11 / 16 m/min Sanding machine Manufacturer: Löwer Type: DSM 3000 Year of manufacture: 1998 Dimensions, space requirements and weight Length: 2660 mm Width: 1020 mm Height: 1890 mm Space requirement: (for operation, tool changes, maintenance) Nodezuzbiopfx Aa Relf Length: 2660 mm + 2 x workpiece length Width: 2100 mm Height: 2000 mm Weight: 1600 kg Technical data Belt width: 300 mm Belt length: 1800 mm Max. working height: 200 mm Sanding motor - Rated power: 2 x 7.5 kW Sanding motor - Rated current: 2 x 15.4 A Sanding motor - Speed: 2870 rpm Feed motor - Rated power: 0.25 / 0.55 / 1.0 kW Feed motor - Rated current: 1.0 / 1.9 / 2.6 A Feed motor - Speed: 700 / 950 / 1420 rpm Belt speed: 1300 m/min Feed rate: 6 / 11 / 16 m/min Brush motor - Rated power: 2 x 0.37 kW Brush motor - Rated current: 2.1 A Brush motor - Speed: 1405 rpm Brush length: 290 mm Brush diameter: 120 mm Height adjustment motor - Rated power: 0.37 kW Height adjustment motor - Rated current: 0.81 / 1.15 A Height adjustment motor - Speed: 600 / 2680 rpm Extraction Connection size: 2 x = 150 mm 2 x = 120 mm Airflow: 2515 m³/h Minimum air velocity at the machine connection: 20 m/s Negative pressure at the extraction port: 889 Pa Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2014, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 167 Nm, overall weight: 35,000 kg, Initial commissioning: December 2014 Control system: Fidia X-axis: approx. 2,200 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,200 mm A-axis: ± 100° C-axis: ± 275° Machine operating hours: approx. 68,000 h Total spindle hours: approx. 26,500 h Clamping table: 2,000 x 3,500 mm with T-slots 2-axis fork milling head Spindle power: 70 kW Spindle speed: max. 15,000 rpm Torque: max. 167 Nm Tool holder: HSK 100A Tool clamping: hydraulic Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Connection data Voltage: 400 V Frequency: 50 Hz Dimensions, weights Required space for machine without peripherals: approx. 8,000 x 6,000 x 5,000 mm Total weight: approx. 35,000 kg Additional equipment - Coolant system - 26-place tool changer - Work area enclosure - Chip conveyor Njdsyrc Akopfx Aa Rolf Available at extra charge: - Wireless touch probe - BLUM laser Condition of the machine Fully operational, very good condition. Can be inspected under power.

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment Nedezuyqispfx Aa Rolf - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: ready for operation (used), - USED - SURFACE GRINDING MACHINE Nledpfx Aajh St Dqo Rsf MAX GRINDING LENGTH: 1015 mm MAX GRINDING WIDTH: 405 mm MAX GRINDING HEIGTH: 350 mm MAGNETIC CHUCK: 400 x 1000 mm GRINDING WHEEL SIZE: 50 x 127 x 350 mm MOTOR POWER: 3,7 kW WEIGHT: 3600 Kg OVERALL DIMENSIONS: 3500 x 1700 x 2000 mm ACCESSORIES: DRESSING TOOL

Condition: used, Year of construction: 1999, Number of grinding stations: 1 Maximum workpiece cross-section: 390 x 390 mm Grinding belt dimensions: 400 x 1800 mm Nodpfszvn I Eex Aa Rolf Length: 1150 mm Width: 1120 mm Weight: approx. 1020 kg Dust extraction connection diameter: 2 x 150 mm Storage location: Supplier

Condition: good (used), Please refer to the images for all technical specifications. Nsdpfx Aezvnnfja Rjlf Transport and loading can be arranged throughout Europe for an additional charge upon request. Prices are subject to VAT. Viewing is possible by appointment. Contact us—our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MUCH MORE. Do you need a high-quality yet affordable machine for your production? Or are you looking to sell yours? For further information or contact options, please reach us via the contact form.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Precision surface grinding machine Degen Type FSH 300 with digital display Technical data and features: >> Manufacturer's serial no. 1379, year of manufacture 2008 Nedpfozu Sn Hjx Aa Relf >> Max. grinding length 300 mm >> Max. grinding width 160 mm >> Working height with new/worn grinding wheel 240/290 mm >> Electrically operated magnetic clamping table 300 x 150 mm x 80 mm >> Total power requirement 4.6 kVA >> Space requirement: length 1.0 m x width 0.9 m x height 1.7 m >> Weight approx. 450 kg About the machine: Offered is a precision surface grinding machine from the German manufacturer Willy Degen, type FSH 300. A German-made product with high precision, an absolute top-quality machine. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: ready for operation (used), Year of construction: 2008, grinding length: 1,600 mm, grinding width: 630 mm, Surface grinder 1600 x 630 M7163x16100, magnetic table size 1600 x 630, machine length 5400mm, depth 2500mm, height 2600mm. Automatic feeds in the X and Y axes. We are the first owners; the machine is used on average for a few hours a month for service-related grinding. Year of manufacture: 2008. Power: 22KW, 60A. Nledpfxey Shzaj Aa Rjf Shipping costs are borne by the buyer. We can arrange complete container shipping, including packing and loading. Here are two packing options: Option 1 Packing on a pallet + aluminum foil and moisture absorbers Requires a 40' HC container. This is the recommended option, as the vacuum foil and absorbers create a protective barrier against moisture and salt. Cost, including loading and securing the machine in the container: 1800 EUR (net). Option 2 Packing without a pallet, aluminum foil, or absorbers. Loading only into a 40' OT container. Cost: 850 EUR (net). Note: In this case, the machine will be more exposed to moisture and salt. Example cost of TRANSPORT ORGANIZATION SERVICE – freight forwarding (all-in), loading Częstochowa, PL, unloading 121001 India, IN, 40 HC, port-to-port, approximately 40 days: 5,050.00 USD.

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Nledpjdzp T Njfx Aa Ref Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool.

Condition: good (used), Year of construction: 2000, The upper drill head is missing. Working height: 1030 mm, Nlodpfxjt Aifxj Aa Ref Height: 1680 mm, Depth: 1800 mm, Width: 2450 mm

Condition: excellent (used), Stainless steel version, Nedpfx Ajhvyzwsa Rolf Length: 1400mm Width: 1200mm Height: 1900mm Weight: about 250kg

Condition: excellent (used), Year of construction: 2005, operating hours: 38,388 h, functionality: fully functional, machine/vehicle number: 019.3784, workpiece weight (max.): 130 kg, grinding length: 1,000 mm, total width: 1,970 mm, total length: 2,735 mm, total height: 1,700 mm, quill travel distance: 35 mm, quill stroke: 35 mm, quill diameter: 50 mm, distance between centers: 1,000 mm, type of input current: AC, spindle speed (max.): 2,110 rpm, spindle speed (min.): 1,670 rpm, grinding spindle speed: 2,110 rpm, overall weight: 3,400 kg, input frequency: 50 Hz, input voltage: 400 V, workpiece spindle speed (max.): 1,000 rpm, STUDER S30-1, manufactured in 2005, machine no. 019.3784 – universal cylindrical grinding machine, hydraulically controlled, for between-centers grinding and external grinding. Well-maintained, original condition, no indication of damage or weld repairs. Included: Original operating manual from Fritz Studer AG (DE/EN/FR, including spare parts catalog and noise measurement report) and EC declaration of conformity, both issued for this machine number. According to this factory documentation, it is the version with a center distance of 1,000 mm. EQUIPMENT - Grinding spindle with external grinding wheel on the left, Ø 400 x 80 x Ø 127 mm, hydrodynamic plain bearings, mounting taper Ø 63 mm - Workpiece spindle, swiveling 0-90°, MK 5, collet chucks W-25, 30-1,000 min-1 continuously variable via frequency converter - Three-jaw chuck mounted, drive for between-centers grinding, centering point in the tailstock - Tailstock MK 3, quill stroke 35 mm, adjustable spindle pressure, fine adjustment for roundness ± 40 µm - Adjustable dressing device on the tailstock (dressing by hand; diamond is a wear part) Nlsdpfx Aaozu T Afo Rof - Digital display Sony LD10 on swivel arm - Hydraulic unit Wandfluh (CH), coolant supply with filtration and aerosol extraction - Machine bed made of mineral cast Granitan S103 - 8 grinding wheel mounting flanges, including one balancing flange IMPORTANT – WHAT IS NOT INCLUDED This machine does NOT have an internal grinding attachment, NO belt spindles, and NO in-process measuring control. The series is prepared for these at the factory, but none of them are installed on this machine; available as accessories from STUDER. Grinding wheels are also not included in the scope of delivery. We only describe what we can document photographically. TECHNICAL DATA (according to the operating manual for this machine) - Center distance 1,000 mm, clamping length 1,030 mm, table stroke 1,050 mm - Max. workpiece weight between centers 130 kg, table swivels 8.5° - X: Rapid traverse 60 mm, plunge depth 3.4 mm in Ø, feed rate 0.012-6 mm/min, incremental feed from 0.001 mm - Z: 50-5,500 mm/min, smallest automatic table stroke 1.5 mm - Grinding spindle 1,670 / 2,110 min-1; machine's power rating: max. 35 m/s, wheel up to Ø 400 mm at 1,671 min-1, up to Ø 316 mm at 2,114 min-1 - Automatic hydraulic grinding cycle: rapid approach, feed 1 and 2, sparking 0-6 s, automatic shut-off - Guaranteed working accuracy (factory specification): straightness 0.0025 mm over 400 mm, 0.004 mm over 650 mm; roundness in external grinding 0.0003 mm - Operating hours 38,388.5 h; connection 400 V / 50 Hz, max. 13 kVA, air 5 bar; noise level ≤ 75 dB(A) - Weight approx. 3,500 kg (factory brochure, 1,000 mm version), footprint approx. 2,735 x 1,970 mm - Center height: will be remeasured and confirmed upon request CONDITIONS Location: 16727 Velten near Berlin. Machine packed on a wooden pallet, delivery 1-2 working days after payment receipt. FCA Velten (Incoterms 2020), loading onto your truck by our staff included. Payment: 100% advance payment. Inspection possible with short notice by appointment. Demonstration and test grinding only by appointment: the machine is disconnected, setup will be carried out by an external service provider; we will agree on the effort and costs in advance. Technical data according to manufacturer's documents and the included operating manual are provided as information; we will confirm individual values during the inspection or upon request. Offer subject to

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, total length: 1,200 mm, total width: 800 mm, overall weight: 100 kg, Equipment: documentation/manual, Hydraulic hand-held grinder, Nodszv Tagepfx Aa Relf Hydraulic power unit, 80 liters Motor, 4.0 kW Speed control Length of hydraulic hoses, 13.0 m

Condition: ready for operation (used), functionality: fully functional, HAAS UHS / Manual Hand Lever Surface Grinder - Grinding length approx. 350mm - Grinding width approx. 180mm - Grinding height approx. 250mm - Grinding movement controlled manually via lever - Swiveling range (horizontal) 360 degrees - Tilting range (vertical) +15 to -20 degrees - General angular adjustment Njdpfx Ajzu Nphoa Rslf - Spindle speeds 2500 / 5600 RPM - Drive power 1.1 kW Dimensions: L x W x H 1.2 x 1 x 1.7 meters / Weight 750 kg Subject to errors and omissions.

Condition: used, Year of construction: 2020, controller manufacturer: Sonstige, controller model: WEISS CNC, _____ Description: Year of manuf. : 2020 Control : Sonstige WEISS CNC Centre width : 650 mm In Generel: ear of construction:2020 Control system:WEISS CNC Centre width:650 mm Centre height:200 mm Nsdpfxozvt Iqe Aa Relf Grinding wheel dimensions:400x60 mm + 500x60 mm Workpiece headstock: Speed:10 -650 rpm Workpiece weight max.:250 (100) kg Sanding diameter max.:390 mm Mounting:MK4 Grinding headstock: Peripheral speed:20 - 50 m/s Grinding disc dimensions right:500 x 60 mm Grinding disc dimensions left:400 x 60 mm X-axis:380 mm Z-axis:700 mm B-axis:torque motor, infinitely variable Tailstock: Pinole diameter:50 mm Pionole stroke:45 mm Mounting:MK 4 Cylinder fine adjustment:+/- 0.04 mm Equipment: Positioning sensors:Direct scales Grinding spindles:2x grinding spindle (left/right) GAP / Crash Controll:Structure-borne sound (Sensotronik) Balancing:MPM balancing device Workpiece measurement:Marposs PF ME Automation:Robot interface prepared Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical Dresser:For external grinding wheel left/right Accessories:Various grinding discs + flanges

Condition: excellent (used), Year of construction: 1994, operating hours: 1,930 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 4,200 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total length: 15,000 mm, table length: 5,000 mm, total width: 15,000 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, total height: 7,500 mm, table height: 1,350 mm, distance between stands: 3,500 mm, type of input current: AC, table load: 65,000 kg, workpiece weight (max.): 65,000 kg, distance table center to spindle nose: 2,300 mm, overall weight: 210,000 kg, spindle motor power: 50,000 W, MACHINE DATA Machine type: Portal milling machine - double column for continuous 5 axis operation Manufacturer: WALDRICH COBURG Model: 15 S - 10 FPF 300 NC Year of construction: 1994 Condition: Fully refurbished 2015 Functionality: fully functional Operating hours: 2,931 h TECHNICAL DETAILS Number of controlled axes: 5 travel distance X-axis: 7,200 mm travel distance Y-axis: 4,200 mm travel distance Z-axis: 1,750 mm spindle speed (max.): 4,000 rpm working width: 3,500 mm PROVISION Machine location: Ljubljana, Slovenia Availability: now Delivery conditions: FCA Pick up at location: Ljubljana Shipping costs: upon request Planer-milling machine - double column: completely overhauled in 2014 / 2015 by Waldrich Coburg (basically everything except the casting): > New control unit > New cables > New motors > New electrics > Guideways overhauled DESCRIPTION - Heavy double-column machine for processing complex shapes - 2 pallet stations with 2 pallets (load capacity 65t each) - Machine with CNC control SIEMENS 840D sl - In 2014, conversion of the control system to SIEMENS 840D sl (incl. complete cabling and control cabinet) - in 2015 replacement of all axis motors - Various angle milling heads - NC-controlled milling head with 50 kW milling power / clamping 2.5° each with Hirth serration (type USP300C450F15S) - 2-axis NC-controlled fork head with 40 kW milling power (type UFN00SZ500) - Automatic tool changer for 76 tools (ISO 50 and 60) TECHNICAL DETAILS Travel X / Y / Z: 7,200 / 4,200 / 1,750 mm Milling width: 3,500 mm Distance spindle nose to table: 2,300 mm Milling power: 50 kW Speed: 10 - 4,000 rpm Nsdpfsvv N I Rex Aa Rjlf Front spindle diameter: 150 mm Spindle holder: ISO 60, ISO50 Control: Siemens 840D sl Pallet size: 3,000 x 5,000 mm Pallet load: max. 65 t Number of pallets: 2 pieces Tool changer: 76 slots Feed rate: 10 - 15,000 mm/min MACHINE DETAILS Pick-up power: 92 kW Weight: 210 t Spindle hours: 2,931 h Switch-on time: 10,870 h Bed dimensions: 12.5 x 2.3 x 0.78 m; 28.5 t Pallet dimensions: 5.35 x 3.0 x 0.4 m; 22 t Main pallet carrier dimensions: 5.1 x 2.9 x 0.5 m; 25 t Dimensions of bed section: 3.8 x 2.9 x 0.5 m; 10 t Milling spindle box dimensions: 4.1 x 1.9 x 1.5 m; 13.5 t Left/right column dimensions: 4.1 x 1.3 x 1.7 m; 10.5 t Exhaust air slide dimensions: 8.5 x 0.7 x 1.2 m; 1.1 t Control cabinet dimensions: 7.9 x 0.6 x 2.1 m; 2.8t THIS IS A TOP CLASS MACHINE FOR MOST ACCURATE WORK; HIGHLY EFFECTIVE. MACHINE IS ASSEMBLED AND UNDER POWER:

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 3.8203, travel distance X-axis: 7,570 mm, travel distance Y-axis: 4,900 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 18,700 mm, table length: 6,850 mm, table width: 2,250 mm, total width: 8,500 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 2,000 rpm, total height: 7,050 mm, table height: 300 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 2,750 mm, type of input current: AC, table load: 60,000 kg, workpiece weight (max.): 60,000 kg, distance table to spindle center: 2,500 mm, overall weight: 145,000 kg, spindle motor power: 63,000 W, feed length W-axis: 2,000 mm, MODEL: Portal Type AGE: 1990 S/N #: 3.8203 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 7570 mm Njdpfeyl S Ngjx Aa Rslf Y-Axis Head Travel: 4900 mm Z-Axis Ram Stroke: 1000 mm, W-axis traverse movement: 2000 mm Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 2600-2750 mm Distance Table To Ram Face: 2500 mm Table Size: 2x3000+850 mm x 2250 mm, two tables for split or integral operation Spindle (Quill) Diameter: 225 mm Spindle Taper: ISO #50 Spindle Speeds: 0-2000 RPM Spindle Motor: 63 KW EQUIPPED WITH: SIEMENS System 840D CNC Control, new in 2008 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors Way Covers 63 KW Spindle Motor Rapid movements: W-2000 mm/min, Z-10.000 mm/min, X and Y-15.000 mm/min Table loads: 30.000 kg+30.000 kg, max 60.000 kg Weight of the machine: 143.000 kg Outside dimensions: 18.700 x 8.500 x 7050 mm

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Nedpfsyahv Ssx Aa Relf Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Year of construction: 2003, condition: used, Max. grinding length: 2000mm, max. grinding width: 1000mm, max. working height with new grinding wheel: 600mm, max. workpiece weight: 3.2t, max. table load: 4.5t, clamping surface dimensions: 2860x1000mm, tool mounting: 4x grinding wheel mounts, spindle diameter at front bearing: 90mm, grinding wheel diameter: 500mm, max. grinding wheel width: 150mm, mounting diameter: 203.2mm, spindle speed: 1000-3000/min, cross travel: electromechanical, cross travel feed: 1-5000mm/min, max. cross travel: 1100mm, smallest programmable value cross axis: 0.001, vertical travel: electromechanical, vertical travel feed: 1-5000mm/min, max. vertical travel: 650mm, smallest programmable value vertical axis: 0.001, feed drive type: hydraulic, connected load: 125kVA, length: 10,284mm, width: 5137mm, height: 3925mm, weight: 22t, operating hours: 18,176h, with documentation. An on-site inspection is possible. Nlodpszuzyxefx Aa Rjf

Year of construction: 1979, condition: good (used), Flat grinding machine make Brand Nlodpfjzvfpyjx Aa Rsf Type: Compact 600/800 with Heidenhain control We do not have any further technical data.

Condition: good (used), Year of construction: 1993, with oil filtration unit Unfortunately, we do not have any further technical data available. Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchasing / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your manufacturing shop? Or are you looking to sell your equipment? Njdpjzvfdkefx Aa Relf For further information or contact options, please use the contact form.

Condition: used, Tschudin HTG310 Universal Cylindrical Grinder Centre height: 100mm Distance between centres: 340mm (13.4") Njdpszrt Ipefx Aa Rslf Maximum grinding diameter: 200mm Maximum grinding length: 340mm Hydraulic table traverse Table swivel: ±11° Wheelhead swivel: ±5° Workhead swivel: 360° Infinitely variable workhead spindle speed: 50–500 RPM Automatic plunge and traverse grinding cycles Automatic infeed with adjustable spark-out timer Rapid wheelhead advance and retract Hydrodynamic wheelhead bearings for exceptional accuracy Grinding wheel size: 350 x 50 x 127mm (14" x 2" x 5") Fitted With Hydraulic table drive Universal workhead Tailstock Coolant system Wheel guard Machine lighting

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0204231, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, height adjustment type: electric, total length: 4,800 mm, total width: 1,500 mm, Kuhlmeyer ZBS 2 Grinding Machine / Belt Grinder – Year of Manufacture 2002 – Industrial Version For sale is a robust and powerful grinding machine, type Kuhlmeyer ZBS 2, built in 2002. This machine is manufactured in Germany and is specifically designed for industrial use in metalworking. Technical Data: Manufacturer: Kuhlmeyer Maschinenbau GmbH Type: ZBS 2 Year of manufacture: 2002 Machine No.: 0204231 Connection voltage: 400 V Control voltage: 230 V Connected load: 6.5 kW Rated current: 16 A Frequency: 50 Hz Compressed air: 6 bar Weight: approx. 2,500 kg Description: The Kuhlmeyer ZBS 2 is a heavy-duty industrial belt grinder, ideal for grinding, deburring, and finishing metal components. Thanks to its sturdy construction and high own weight, the machine runs extremely smoothly and enables precise processing results, even on larger workpieces. Features & Equipment: - Massive, long-lasting construction - Suitable for continuous operation - Pneumatic components (6 bar required) - High grinding capacity with 6.5 kW drive Njdpfoyvrtzox Aa Relf - Made in Germany – proven industrial quality Condition: Used, fully functional. Age- and use-related signs of wear are present, but technically ready for operation. Areas of Application: - Metal fabrication - Stainless steel processing - Grinding and finishing work - Industrial and workshop use Other Information: Viewing by appointment possible. Loading can be assisted. All information without guarantee. Subject to prior sale.