Used Narex Permanent Magnetic Plate, Round 250Mm for sale (16,953)

Condition: good (used), APV Heat Exchanger. Type : N35. Normal capacity : 6.5m3/H. Transmission surface : 67,9m2. Working pressure : 6bar. Njdorwl I Hjpfx Abzjld Test pressure : 6bar. Volume, Side 1 : 94liter. Volume, Side 2 : 94liter. Working temperature, MAX/MIN. Degrees Celsius. 120/0. ORA.18

Condition: used, functionality: fully functional, Year of construction: 2004, Sergi Power Bending Rolls Nlsdjzl Up Uepfx Abzod Manufacturer: SERGI S.R.L. (Italy) Model: Export Capacity: 1550 x 6mm S/No.: 1865 Year: 2004 Max. working width: 1550mm Max. bending thickness mild steel: 6mm Roll diameters: 150mm Pinch Pyramid Manual Drop End Forward reverse foot control

Condition: ready for operation (used), Year of construction: 2000, length 1500 mm Nlsdpfx Abezpf T Sozod width 1000 mm

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy panels with new suction cup rubber Load capacity: 150 kg horizontally and vertically Suction cup can be swivelled 90 degrees by motor Suction box: 1000 x 675 mm Audible warning signal in case of too low vacuum 400V, 1.5kW Can be attached to an existing chain hoist CE marking No inspection certificate available Suction cup rubber has been replaced As new condition The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this supplier". Nedjv S Synopfx Abzjld

Year of construction: 2026, condition: used, Type of fuel: Petrol Empty weight: 133 kg Serial number: SU2026VC03004 Lot Number: 0247 Weight: 133 kg Engine: USA EPA - Gasoline engine - 6.5 pk Plate size: 690 × 420 mm Forward speed: 6–16 m/min Vibration force: 30 kN Dimensions: 800 × 480 × 980 mm Online auction of construction, agricultural, and industrial machinery (including: JOHN DEERE / DEUTZ-FAHR / CASE / NEW HOLLAND tractors, VOLVO / CATERPILLAR / HITACHI / KOMATSU excavators, wheel loaders, and MANITOU skid-steer loaders, aerial work platforms, FORD and MERCEDES-BENZ trucks, portable compressors, power generators, rollers, scissor lifts, various ROLLAND and KUHN agricultural machines, and off-road and workshop equipment, etc.), with most lots located at our own warehouse in Deinze, Belgium. The online auction opens Wednesday 22 July and closes Tuesday 4 August. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 3 August Pickup day is on: Nsdpeznmrmjfx Abzold - Tuesday 11 August Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 1999, AMADA MODEL GPN 840 HYDRAULIC SHEAR MAXIMUM CUTTING LENGTH 4000 mm MAXIMUM THICKNESS M.S. 45 kg/mm/2 8 mm MAXIMUM THICKNESS S.S. 60/kg/mm2 6 mm STROKES PER. MIN 10 - 35 BACK GAUGE RANGE 10 - 1000 mm MOTOR SIZE 15 KW MACHINE WEIGHT 10100 kg STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 1.5 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORT SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER AUTOMATIC SHEARING CONTACTS IN BACK GAUGE BLADE GAP AND RAKE ANGLE ADJUSTMENT FRONT FLIP STOPS ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE WORK CHUTE HOUR COUNTER Nedpfx Aotrkmnjbzeld AUTO-DIAGNOSTICS

Condition: ready for operation (used), Year of construction: 2006, sheet width 3030 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.50 mm no. of strokes 34 Hub/min cutting angle 1.6 Grad table height 820 mm distance between columns 3120 mm Control POS 100 engine output 2x 4.0 kW weight of the machine ca. 3600 kg range L-W-H 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros (!!) Special price available upon request The PDC motorized guillotine shear is the reinforced version of the MHSU. It offers greater performance thanks to a more robust design and a "DUO-CUT drive" on both sides. Features: - Robust, motorized oscillating-cut guillotine shear - NC-controlled electric motor-driven backgauge * with SCHRÃ?DER POS 100 NC control system * digital position display for the backgauge * adjustable from the front right * with setpoint/actual value input * stepless adjustment over the entire travel range * Limit values secured with limit switches * 9-program programming possible - Break-resistant, torsion-free welded steel construction - Compact and well-organized machine design - All-steel blades - 1x hold-down bar Nljdpfx Abszn Ahdszod - 1x long side stop with â??ELGOâ? digital display - 2x front support arms, adjustable â??Sliding Systemâ? - Work table with recessed handles - Rear safety guard - 2x emergency stop buttons at the front - 1x freely movable foot switch - Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 2013, length / mm width / mm height / mm Becker Vacuum Clamping System U 3.6 S-09 – 230 V – Year 2013 – Complete with Vacuum Pump, Vacuum Tank & Vacuum Table For sale is a complete Becker vacuum clamping system consisting of a Becker vacuum pump, model U 3.6 S-09, a vacuum tank (reservoir), a vacuum clamping table, and the mounting accessories shown in the photos. The system was previously used in an industrial environment and is ideal for CNC routers, machining centers, woodworking, plastics processing, fixture holding, and other vacuum clamping applications. Technical Specifications Manufacturer: Becker Model: U 3.6 S-09 Year of Manufacture: 2013 Power Supply: 230 V, Single Phase Motor Power: 0.30 kW (50 Hz) / 0.36 kW (60 Hz) Speed: 1380 / 1650 rpm Inlet Capacity: 6.4 / 7.4 m³/h Maximum Vacuum: 10 mbar Protection Class: IP54 Njdezn Aiuopfx Abzjld Scope of Delivery Becker vacuum pump U 3.6 S-09 Vacuum tank / reservoir Vacuum clamping table Clamping rails Mounting and clamping accessories (as shown in the photos) Condition The vacuum clamping system is in good used condition with normal signs of wear consistent with industrial use. It was removed from a fully operational machine. The sale includes everything shown in the photographs. Inspection is welcome by appointment. Shipping or collection can be arranged by mutual agreement. Plate size: 440 x 280 x 50 mm

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Nlodpjznngxjfx Abzed Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: used, This listing is for 1 of 2 Velp Scientific HSC Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. Nlsdpfexx Ai Njx Abzod The Velp Scientific HSC Heating Magnetic Stirrer is an analogue heating magnetic stirrer designed for basic heating and stirring applications in chemistry, biology, and pharmaceutical laboratories. It features a rugged design with a ceramic heating plate that resists acids, bases, and solvents, and a techno-polymer casing that resists chemicals, scratches, and surface abrasions. Key Specifications Maximum temperature: 400°C Stirring volume: up to 15 liters Stirring speed: up to 1300 RPM Heating control: Analog Ceramic hot plate: Square-shaped and resistant to chemicals and scratches Power supply: 115V/60Hz Dimensions: 8x3.7x13.5 inches

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Nlodpfxszpbrqj Abzed Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Good condition

Condition: used, Year of construction: 2000, length 2750 mm width 1400 mm height 340 mm total power requirement 0 kW Nodpfxoznnd Rj Abzjld weight of the machine ca. 3 t dimensions of the machine ca. 2750 x 1400 x 340 mm Marble table as a surface plate. It was the bottom part of a Zeiss measuring machine. Size is 2750 x 1400 x 340 mm.

Condition: used, length n.n. mm width n.n. mm total power requirement 0 kW weight of the machine ca. n.n. t dimensions of the machine ca. n.n. m Some spotting plates in different sizes, without table legs. Price per sqm. We have following sizes: 1500 x 1000 mm Nljdpfx Aoznndwjbzjd 1000 x 1000 mm (2 pieces) 1000 x 800 mm 600 x 500 mm 400 x 300 mm 210 x 130 mm round with diameter of 520 mm.

Condition: good (used), Year of construction: 1996, sheet width 3050 mm plate thickness 6.5 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable 750 mm work height max. 770 mm no. of strokes 11 - 22 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 5 voltage 380 V engine output 11.0 kW weight of the machine ca. 5000 kg range L-W-H 3950 x 1750 x 1720 mm Features: - Electro-hydraulic / slide-guided panel shear - HACO NC control, Model SC 5, front left * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction of the backgauge * Emergency stop switch - Electromotor-driven backgauge, mounted on ball screws - Hydraulic sheet metal hold-down devices - Front finger guard Njdezndq Tjpfx Abzjld - 1x long side stop - 1x freely movable foot switch - Operating instructions in German (PDF)

Condition: good (used), Year of construction: 2001, Electrical Connection: 380/400 V, 50 Hz Working Height: 970 mm Width: 2650 mm Depth: 1200 mm Nljdezpa Rljpfx Abzjd Height: 1750 mm Weight: approx. 800 kg Condition: good, second-hand

Condition: new, ZEATZ NC rotary tables, PHV series – available for short delivery times The ZEATZ NC rotary tables from the PHV series stand for the highest precision, stability, and flexibility in modern machining. Ideal for positioning, turning, and simultaneous machining in a wide range of applications. Your advantages at a glance: ✔ Integration into existing machines with HEIDENHAIN or SIEMENS control systems ✔ Service & technical support directly from JMT ✔ Individual designs and customer-specific solutions ✔ High load-bearing capacity for heavy workpieces Why ZEATZ: ZEATZ stands for innovative NC rotary table solutions with the highest precision and reliability. Thanks to robust construction, backlash-free drive systems, and state-of-the-art control technology, the rotary tables are ideally suited for demanding machining processes. Technical features: Working position: Vertical / Horizontal Applications: Precise positioning, stepless turning, and interpolative machining in a single setup Sizes: Faceplate diameter: 500 / 600 / 800 / 1,000 / 1,200 mm (optional square clamping surfaces also available) Max. workpiece weight: Horizontal: up to 20,000 kg Vertical: up to 4,000 kg Njdpfx Aem Tvz Debzold Positioning accuracy: ± 3" Integration: Compatible with HEIDENHAIN and SIEMENS control systems Your advantages: ✔ Official distribution partner for ZEATZ in Germany ✔ On-site technical support and service ✔ Fast supply of spare parts ✔ Support for integration and commissioning ✔ Numerous reference projects available in Germany

Condition: used, Round magnets with MK 4 mount, D = 140 mm and D = 220 mm Nlodpfszpfg Sex Abzed

Condition: good (used), Three-roll bending machine KNUTH KRM 12/2.5, serial number 121008, manufactured in 2000, roll length 125 cm. Njdpfxeznl Aqs Abzold

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Nlsdothuzpepfx Abzed Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Nsdpfsznn Hlox Abzjld Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition

Condition: used, Year of construction: 1999, cutting width 3000 mm Numbers of torche 1 Cutting system Plasma PA-S 150 total power requirement 4,5 kVA Nodpfx Aozmy Tbobzsld weight of the machine ca. ca. 8-12 t required space 16000 x 5000 mm

Condition: used, Original quick-change plates for Dreistern P3.125 profiling systems. Production direction: left to right. The following quantities and sizes are available: 3 pieces for 2 profiling frames (795x790) 3 pieces for 6 profiling frames (2385x790) Some of the groove blocks are missing, but can be re-manufactured if required. Price per piece. Njdpey Sxx Asfx Abzold

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, Equipment: CE marking, documentation/manual, - Year of manufacture: 2020 - Made in Bulgaria - DTR, CE TECHNICAL SPECIFICATIONS: Nlsdow H Ryuepfx Abzod – Height of workpieces: 8-45 mm – Minimum length of workpiece: 100 mm – Minimum width of workpiece: 100 mm – Edge thickness: 0.4-3.0 mm – Feed rate: 9.5 m/min – Cutting unit - motor power: 1 x 0.27 kW – Milling unit: 2 x 0.35 kW – Milling unit: 12,000 rpm – Corner rounding unit - minimum length of workpieces: 250 mm – Corner rounding unit - motor power: 1 x 0.35 kW – Corner rounding unit: 12,000 rpm – Pre-milling unit: 1x 1.1; 1 x 0.75 kW – Pre-milling unit: 12,000 rpm – Edge trimming unit: – Glue removal unit: – Polishing unit - motor power: 2x0.18 kW – Polishing unit: 2800 rpm – Extendable support with rollers: – Diameter of dust extraction nozzles: 120 mm – Compressed air pressure: 6.5 bar – Total power: 6.7 kW – Dimensions - L x W x H: 4130x1220x1470 mm – Weight: 1180 kg

Condition: new, Year of construction: 2026, Drum magnet installed in a housing Magnet: Ferrite Drum diameter: 300 mm Drum length: 400 mm Entrainment elements: 4 pieces, 10 mm Gear motor: 0.25 kW / 400 V / 50 Hz Rotation speed: 30 RPM Housing: made entirely of stainless steel With upper and lower parts: 1 inlet / 2 outlets With material limiting slide gate at the inlet Nledpjznmunofx Abzed Front panel removable

Condition: excellent (used), Year of construction: 2001, sheet width 4000 mm Nledpfx Aey Diahebzjd plate thickness 16 mm total power requirement 37 kW weight of the machine ca. 20 t dimensions of the machine ca. 4700 x 2100 x 2000 mm