Used Nooteboom Semi Low Loader for sale (19,130)

Condition: new, maximum load weight: 35,800 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Cedez Dmnwjpfx Adrjrh Chassis, gooseneck: Special steel frame made of high-strength fine-grain steels, electrically welded at the connection points, well-dimensioned outer frame. 3-axle arrangement. Wheel arch above the axles with spray mist suppression. All steel parts sandblasted. Lateral impact protection made of anodized aluminum mounted. Increased point load of approx. 30,000 kg over approx. 5,000 mm. Special design in the gooseneck area for maximum possible low-bed length in combination with the AluLeg outrigger supports, instead of telescopic outrigger winches, max. rear pivoting radius of the semi-trailer tractor unit 2,100 mm. Special superstructure with rear girder widening: DINKEL - special superstructure. Self-supporting aluminum roof beam / profile approx. 100 x 100 mm, sliding tarpaulin with plastic flaps. Rear girders can be widened to approx. 4,200 mm (only for loading and unloading). Three sliding girders per side with rubber strap relief. Additional center girder locking in the roof beam and parking position, by means of a pull cable and spring latch. DINKEL - lifting roof, mechanically height-adjustable. Lifting roof height approx. 400 mm, operable on both sides or on one side. Without opening the opposite side and the doors. Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with height adjustment in the girders. Front cover on the front wall for operation under a tarpaulin up to a total height of 4,400 mm. Four rows of stackable approx. 150 mm aluminum slats on the side, with 450 mm pockets at the bottom, above 4 rows of individual pockets. In the upper bed, only 3 rows of insert slats. Evenly distributed spacing. Floor: approx. 27 mm special water-resistant glued beech - screen-printing panels, rough surface. Steel sheet in the wheel arch area. Forklift-compatible according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking/release safety valve). Spring brake cylinders as parking brake. Wabco Smart Board with odometer and unit load display. Including WABCO tire pressure monitoring system. Axles: 3 x 10,000 kg SAF/Sauer with drum brakes in a low-bed design. Air suspension with lifting and lowering device, total stroke approx. 230 mm. Third axle as a friction-controlled trailing axle with electric and mechanical lock. Twin tires: 235/75 R 17.5, -12-ply. Premium brand of our choice, including E-wheel chocks. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, top. Painting: Chassis with superstructure in RAL color of your choice. Center girders, axles powder-coated black. Corner girders in hot-dip galvanized design. Plastic parts black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment including: - E-supply line 15-pin - Air suspension in ECAS design, operation on the semi-trailer - Overwidth signs front and rear in galvanized, steplessly telescopic design with attached marker lights including sockets for flashing beacons (small signs) - Center girders with additional roof beam locking, by means of a pull cable - operation from below - Sliding tarpaulin support unlocking also from

Condition: used, maximum load weight: 37,530 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 02/2012, next inspection (TÜV): 11/2026, total width: 3,000 mm, total height: 3,780 mm, Equipment: ABS, * Gooseneck with side rails (foldable) * Low-bed length: 11950 mm - 15450 mm * Low-bed extendable in stages by 3500 mm Crjdpfxjy T Dyzj Adroh * Low-bed width adjustable by 460 mm * Hydraulically adjustable loading ramps (2-part) * Stake pockets * Wabco SmartBoard * 4 axles with twin tires * 1st axle liftable * 3rd and 4th axles with trailing steering * Chocks ----* Tire size: 235/75R17.5 * Technical total weight: 58000 kg * Tare weight: 12470 kg * Overall length: 13700-17200 mm * Overall width: 2540-3000 mm * Next inspection due: 05.2026 ----Vehicle number: 12062----Errors and prior sale excepted.----Advertisements and various lettering have been digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: * Trade-in of your old vehicle * Inspection (HU/SP) * Complete export processing * Arranging financing * Applying for export license plates * Vehicle transport * Vehicle registration * Recovery and vehicle transport ----Your VTS Team

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) Crsdpfx Adszzhfujroh EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: used, maximum load weight: 37,240 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2021, loading space length: 19,500 mm, loading space width: 2,550 mm, Year of construction: 2021, Equipment: ABS, Manufacturer HRD Model Lowloader 6,5 m. Extension Year 2021 Condition Very good Cjdoz Ddp Eepfx Adrjrh Serial Number W09STTM3NMEN10036 Ref. nr. 8199 Reg. date: 10-03-2021 Drum brake: ? ABS: ? Rear axles: SO F Suspension: Air Tire Size: 235/75R17,5 Cover% left 40 - 40 - 40% Toolbox: ? Total weight: 48000 kg. Net weight: 10760 kg. Inside length: 19500 mm. Internal width: 2550 mm

Condition: used, empty load weight: 8,804 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2011, suspension: air, tire size: 385/65/R22.5, maximum speed: 90 km/h, Equipment: ABS, | Schmitz refrigerated semi-trailer S3B | Carrier Maxima 1300 refrigeration unit | Pallet box | Schmitz axles with disc brakes | Spare wheel holder, tool box | Diesel operating hours: | Subject to errors, typos, and prior sale. Cjdjy Uxvaspfx Adrsrh

Condition: used, empty load weight: 8,550 kg, maximum load weight: 26,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 11,600 mm, loading space height: 275 mm, total length: 2,600 mm, total width: 4,000 mm, total height: 12,000 mm, suspension: air, tire size: 385/65 22,5, Equipment: ABS, | Kögel SVKA 24 Refrigerated Double-deck Semi-trailer | SAF axles with disc brakes | Carrier Maxima 1300 | 385/65R22.5 | Toolbox | Temperature data recorder | Electric and diesel deep-freeze unit | Good condition, double-deck | Pallet box | Subject to error, input mistake, and prior sale Crjdpfxow Hbuie Adroh

Condition: new, Year of construction: 2025, GVN Trailer 3 Axle Standart Lowbed      Codoqxa Szjpfx Adrerh Please get contact with us for more informaiton;     

Condition: used, empty load weight: 10,860 kg, maximum load weight: 37,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 06/2018, suspension: air, tire size: 235/75 R17,5 140J, color: other, gearing type: other, front tire size: 235/75 R17,5 140J, rear tire size: 235/75 R17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Rubber surface, two-part ramp with grating, ramps spanning the entire width, electro-hydraulic pump for ramps or connection to the truck's hydraulic system. -- Subject to printing errors, errors and changes. Sample images. -- More details can be found at: !, More Details: ! Cjdpfx Aoz Hkwnsdrsrh

Condition: new, maximum load weight: 37,619 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 9,240 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture 2025 | NEW | 40t Ramps | Top Specification Location: Germany Condition: New / Unused Availability: Immediately --- Description For sale is a brand-new Kässbohrer K.SLS 3 / 0N ? 18/30 low-loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps — ready for immediate use. --- Technical Data Dimensions: - Overall length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm - Overall width: 2,550 mm (+600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights: - Permissible gross weight at 80 km/h: 48,000 kg - Permissible gross weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - Kingpin load: up to 18,000 kg --- Chassis & Axles: - 3 BPW axles, air suspension, drum brakes - 1 trailing axle at rear - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tyre pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area: - Foldable 40t access ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + chequer plate over wheel arches --- Load Securing: - Multiple 8,000 daN and 13,400 daN lashing points - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - 450 mm front wall, side and rear walls made of aluminium --- Body & Chassis: - High-strength S700 MC steel - Partially metallised (Zn/Al 85/15) — strong corrosion protection - Rear angle: 10°, 500 mm - 2" kingpin - Mechanical landing legs at front - 45t supports at rear --- Equipment: - 2× toolboxes - All-round warning beacon - LED lighting Cjdpfx Adjx Efzuersrh - Rear work lights - Wheel chocks - 9×2 extensions (up to +300 mm) - Stake box - Reflective strips on sides & rear --- Colour: RAL 3020 Traffic Red We are happy to provide further information upon request.

Condition: used, empty load weight: 8,921 kg, maximum load weight: 27,079 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2020, next inspection (TÜV): 04/2027, total length: 2,600 mm, total width: 4,000 mm, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, | Krone TK SLXi 400 refrigerated semi-trailer | SAF axles with drum brakes | 2 spare wheel holders | ThermoKing SLXi 400 refrigeration unit | 5 cm wall thickness | Tires: 385/65 R22.5 | Double-deck without beams | Subject to errors, typos, and prior sale. Crjdpeznw N Nefx Adrjh

Condition: used, empty load weight: 8,844 kg, maximum load weight: 27,156 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, loading space width: 2,500 mm, loading space height: 2,600 mm, total length: 2,600 mm, total width: 4,000 mm, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, | Krone Cool Liner refrigerated semi-trailer | Double-deck | Flower-width, lift axle | BPW axles with disc brakes | Toolbox | 2x spare wheel holders | Pallet box | ThermoKing SLXi 300 refrigeration unit | Tires: 385/65 R22.5 | Operating hours: 2063h | Subject to errors, typos, and prior sale. Codjz Hvtbjpfx Adrorh

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/1998, loading space length: 15,257 mm, loading space width: 2,530 mm, Equipment: ABS, Broshuis E2190/27 Low-loader, telescopic trailer, steering axle For inquiries: 0926861 Crodpfx Adsz Hrxtoroh * Permissible total weight: 48,000 kg * Tare weight: 9,840 kg * Telescopic * ABS * EBS * 3-axle air suspension * Follow-up steering axle Dimensions (loading area/platform) Length of low-bed: 8,934 mm + 6,323 mm (telescopic) * Platform/gooseneck: 3,630 mm * Width: 2,530 mm Tires: 1st axle: 235 / 75 R 17.5, 30% air suspension 2nd axle: 235 / 75 R 17.5, 30% air suspension 3rd axle: 235 / 75 R 17.5, 30% air suspension, steering axle ----Price: 19,900 EUR + 19% VAT For further questions, you can reach us at the following phone numbers: We speak: German, English, French, Polish, and…? Typographical errors, errors and prior sale are subject to change.

Condition: new, overall weight: 58,000 kg, axle configuration: > 3 axles, Year of construction: 2026, Equipment: ABS, OTHER GÜVEN LOWBED TRAILER? 4 AXLES? HYDRAULIC RAMPS? STEERABLE AXLE? OVERWIDTH DEVICE?----VEHICLE HISTORY OTHER GÜVEN TRAILER? STEERABLE AXLE? HYDRAULIC RAMPS? MOVABLE RAMPS? OVERWIDTH? NEW? LIFT AXLE? MANUFACTURER * GVN-TRAILER, OUR OWN PRODUCTION FROM TURKEY * 4 AXLES * AXLE DESIGN * TRI-AXLE Crodeymu Nxopfx Adrjh * THIRD AXLE WITH STEERABLE AXLE * WITH LIFT AXLE * OSMAN KOÇ AXLES * DRUM BRAKE * AIR SUSPENSION BODY * WITH GOOSENECK * EXTENDABLE LOWBED, 6 M LONG * KING PIN ADJUSTABLE AND 22 T DIMENSIONS * FROM RAMPS TO KING PIN (CLOSED): 9.40 M * FROM RAMPS TO KING PIN: 12.10 M * EXTENDED TOTAL LENGTH: 15.40 M * EXTENSION: 6.00 M RAMPS * HYDRAULIC RAMPS * SWIVELING * HYDRAULICALLY MOVABLE TO THE LEFT AND RIGHT EQUIPMENT * AIR SUSPENSION * LOAD SECURING LASHING POINTS * OVERWIDTH PREPARATION * TOOL BOX TIRES * TIRE SIZE: 235/75 R17.5 * DUAL TIRES WEIGHTS * EMPTY WEIGHT: 12,500 KG * PERMISSIBLE TOTAL WEIGHT: 68,000 KG * TECHNICAL PAYLOAD: 45,500 KG * TECHNICAL PERMISSIBLE TOTAL WEIGHT: 58,000 KG * AXLE LOADS: 12,000 KG PER AXLE CONDITION * NEWLY PRODUCED DESCRIPTION GVN TRI-AXLE LOWBED TRAILER WITH LIFT AXLE AND STEERABLE AXLE (3RD AXLE), AIR SUSPENSION AND OSMAN KOÇ AXLES WITH DRUM BRAKES. EXTENDABLE TRAILER WITH 6 M EXTENSION AND ADJUSTABLE KING PIN. HYDRAULIC, SWIVELING RAMPS, AS WELL AS OVERWIDTH PREPARATION AND LOAD SECURING. IDEAL FOR CONSTRUCTION MACHINERY AND HEAVY LOAD TRANSPORTS.----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION AND 17 - 21 DAYS AUSTRIA REGISTRATION EURO 1 VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU & third countries, a deposit of at least 500.00 EUR / 1,000.00 EUR will be charged. Subject to change, errors and prior sale! You can find more vehicles on our website: Sales are exclusively subject to our general terms and conditions - see website. Important note - Important information: Despite careful verification of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, empty load weight: 8,550 kg, maximum load weight: 27,450 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2021, loading space length: 12,800 mm, loading space width: 2,550 mm, loading space height: 3,055 mm, suspension: air, tire size: 245/70R17.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, air suspension, 1st axle can be lifted, ABS (anti-lock braking system), hydraulic ramps, rear supports, outriggers. 9-ton axles, 13 tires, drum brakes, loading height approx. 880-950mm, can be widened to 3,050mm, length of the low-loader 8,800mm, length of the gooseneck 4,000mm, own hydraulic pump (independent of the towing vehicle), operation of the hydraulic ramps on the passenger side, total weight with a 3-axle tractor unit is 56,000kg, resulting in a payload of 36,290kg! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Crjdpfjzq Hf Eox Adrsh

Condition: new, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,590 mm, loading space width: 2,500 mm, loading space height: 1,820 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Burgers Double Deck Trailer | 2-Axle Steered NEW More volume. Lower costs. More sustainable transport. Up to 60% more loading space compared to standard trailers. In many cases, replaces 3 trailers with 2 double deckers, reducing CO₂ emissions by up to 40%. Technical Data (Model: 2-axle steered) Chassis and Running Gear Design: 2-axle, steered * Axle system: TRIDEC TF-V02, mechanical steering without electronics * Air suspension with low-maintenance bushings, lift range +160 mm / -105 mm * Axle spacing: 1,400 mm * Axle load: 2 × 9,000 kg = 18,000 kg * Permissible gross weight: 30,000 kg (12,000 kg kingpin load + 18,000 kg axle load) * Tyres: 4 × Goodyear 385/65 R22.5 on steel rims * Wheelbase and axle position adjustable according to loading scheme * Wheel housings with wear blocks and anti-spray mudflaps * Fully hot-dip galvanized chassis to ZINQ standard Brake and Safety Systems WABCO 2-line air brake system * Drum brakes 420 × 180 mm * ABS/EBS-E with ECAS (level control), ELEX, and RSS (electronic stability control) * Visible indicator lights for ABS/EBS and ECAS Dimensions External dimensions (L × W × H): 13,820 × 2,550 × 4,045 mm * Upper deck internal dimensions: Length 13,590 mm × Width 2,500 mm × Height 1,820 mm * Lower deck internal dimensions: Length 9,940 mm × Width 2,500 mm × Height 1,820 mm * Lower deck height from ground: 320 mm Bodywork and Materials Side walls: 21 mm plywood, coated inside and out with white polyester * Front wall: 24 mm plywood, both sides polyester white * Roof: 30 mm insulated polyester panel, white, with rainwater drainage * Floors: Aluminium profiles (top and bottom), non-slip, grey coated * Stainless steel front and corner profiles, L-profiles on side flaps Crodpfew I Iinex Adroh Access and Operation Three side flaps (battery compartment, lift/smartboard control, technical access) * Multi-deck lift Dhollandia DH-VH (2,500 kg lifting capacity, hydraulic folding tip, LED platform lighting, foldable handrails and ramps) * Lift control: external operation on the right, integrated into the fence * Spare wheel not included Electrics and Lighting LED interior lighting upper and lower deck * Complete LED exterior lighting: position, marker, reverse, and work lights * Additional LED for platform lighting * Power supply via 2 × 230 Ah batteries, charging via tractor unit * Main switch behind side flap, coupled with lift control * WABCO Smartboard: weight display, odometer, adjustable loading/unloading heights Finish and Paintwork External colour: RAL 1003 yellow (non-metallic) including wheel wells, stainless steel front and rear * Reflectors: 3M partial contour marking (white sides, red rear) * Advertising space possible (optional) Benefits 60% more loading space – replaces up to 3 standard trailers with 2 double decks * 40% lower CO₂ emissions – eco-friendly and economical * ROI often within just 1 year * Customisable (axles, cooling, dimensions) * Suitable for long-haul and distribution transport Available Configurations at Burgers: 2-axle standard – rigid or steered, 13.60 × 2.55 × 4.00 m * 3-axle standard – rigid or with steered axle * City trailer – max. 11.50 m, always steered * Special dimensions – height up to 4.25 m depending on national regulations * Body: plywood or insulated, optionally with cooling and temperature zones * Extras: tail lift, hydraulic ramp, solar modules, cameras, aerodynamic profiles, LED packages For further information, we are happy to assist you.

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-Axle MULTIMAX "PLUS" semi-trailer, air-suspended and with hydraulically forced steering axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Csdpfx Adoizu Ntsrjrh Speed: 80 km/h (legal) Total weight: 49500 kg / 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg / 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin offset to rear approx.: 2,100 mm Fifth wheel height loaded approx.: 1205 mm Platform length approx.: 9,600 mm Extendable by approx.: ? Platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55 / +145 mm Axle spacing: 1,360 mm Total weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific regulations. Technical description Gooseneck: Gooseneck in SNT design to optimize platform length, length approx. 3,900 mm, rear with a bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor-trailer combinations: 4 x 2 and 6 x 2. Platform: Platform, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°. Platform behind the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm. Open grating deck. Hydraulically folding ramp ends. Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 365 mm. Maximum load and angle of inclination according to technical data sheet: C470319 Maximum inclination angle with lowered platform: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer according to our choice Load index 143/141J (144/144F) Braking system: Braking system of the brand WABCO EBS-E according to EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" design according to EU regulations. (ASS 3) Metallization: Complete HRM metallization (High Resistance Metallization) Complete steel structure shot-blasted, then hot-dip galvanized with ZINACOR 850 (Zinc 85% - Aluminum 15%). Painting: 6-coat finish: Complete steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Top coat with 2 coats of 2-component paint (acrylic), solid color in RAL colors of your choice, followed by sealing of the cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra cost. Steel structure: Steel structure made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders tested according to DIN-EN 287-1. Welding process MAG according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 Front wall made of steel, plug-in, approx. 400 mm high Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pole. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pole connection according to ISO-12098 If your pin assignment differs from the ISO connection standard, please inform us. "Anderson" socket on the connection strip at

Condition: used, maximum load weight: 36,700 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 04/2004, loading space length: 14,300 mm, loading space width: 2,500 mm, loading space height: 900 mm, Equipment: ABS, Stock no. 5827 Crjdpfx Ajy T Dlwjdroh Doll low-bed semi-trailer with a maximum loading area of 14.30m / 4 axles with forced steering / cable control ----* Manufacturer: Doll * Type: S4H-N * First registration: 04/2004 * Total weight: 50,000 kg * Unladen weight according to vehicle registration document: 13,300 kg * Payload: 36,700 kg * Axles: 4 x SAF electro/hydraulic forced steering / drum brakes * Suspension: Air suspension with lifting and lowering function * Tires: 235/75 R 17.5, approx. 50% tread, on steel rims * Color: Gray * EBS Wabco * Low-bed: approx. 9.30m long (+5.00m) x 2.50m wide * Low-bed extendable to approx. 14.30m (5m extendable) * Low-bed widenable to approx. 2.98m * Loading height when loaded approx. 0.90m * Gooseneck approx. 3.60m long * Intermediate table movable * Removable aluminum side boards, approx. 0.40m high * Removable stakes * Pockets for inserting stakes * 3 pairs of lashing points (3.2t) on the gooseneck * 7 pairs of folding lashing eyes (3.2t) in the low-bed * Floor: steel/wood * Toolbox at the front of the gooseneck * Full-load supports at the front * Mechanical supports at the rear * Central lubrication system * Cable remote control for forced steering with connection for front or rear * Extendable warning signs at the front and rear * LED reversing lights German trailer!! German documents!! Cable control!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes or sales that may occur in the meantime. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, empty load weight: 8,370 kg, maximum load weight: 34,630 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 1,020 mm, suspension: air, tire size: 445/45R19.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. 3 axles, SAF axles, air suspension, first axle liftable, last axle with trailing steering, ABS (anti-lock braking system), lashing eyes, raise and lower function, detachable loading ramps, rear support, landing legs, toolbox. Body: Göbel low loader, 43,000 kg. Detachable ramps (reinforced version) available at an additional net cost of €1,800 Loading area: Gooseneck 4,500 mm, bed length 9,100 mm, 1st axle lift with starting assistance, 28 mm sealed hardwood floor, 25 pairs of flush-mounted heavy-duty lashing rings, each rated at 8,000 kg, side rail for lashing straps with claw hooks approx. every 500 mm, rated at 5,000 kg each, insert sleeves, 80 mm stake pockets, chassis hot-dip galvanized. For an additional charge, available with matching tractor unit 2648 LK (17697) and ballast platform (17699)! Codpfsyhrakex Adrerh Approx. 54,160 km mileage! Loading height approx. 1,020 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: used, empty load weight: 13,100 kg, maximum load weight: 22,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2013, suspension: air, tire size: 385/65R22,5, Equipment: ABS, | VAN ECK UT3Z Double-decker refrigerated semi-trailer | Carrier Vector 1950 Diesel, operating hours: 8791h | Gross weight: 36,000 kg, payload: 22,900 kg | Dimensions of loading area: 1st deck: Length: 13.20m, Width: 2.48m, Height: 1.82m. 2nd deck: Length: 9.65m, Width: 2.48m, Height: 1.78m. Passage between axle units: 1.50m | Portal doors | BPW axles with single-wheel suspension, Tridec | 2-zone cooling, 2 evaporators | Tire size: 385/55R22.5 | Wabco Smartboard | Errors, input errors, and prior sale are subject to change. Credpfx Ajz Hvtzodrjh

Condition: used, maximum load weight: 21,130 kg, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 11/2026, total width: 2,540 mm, total height: 1,980 mm, Equipment: ABS, Kässbohrer SLL 2-Axle Lowbed with Hydraulic Steering Manufacturer: Kässbohrer Type / Vehicle code: K.SLL 2 / 2H ? 18 / 20 Vehicle type: Lowbed Semi-Trailer Country of registration: Germany Brand: Kässbohrer Chassis color: RAL 3020 Traffic Red Dimensions & Weights * Overall length: 13,210 mm * Total width: 2,540 mm * Fifth wheel height (H5): 1,250 mm * Platform height (unladen): 910 mm * Platform height (laden): 300 mm * Platform length: 6,810 mm * Extension: 5,550 mm * Gooseneck length: 3,600 mm * Rear swing door: 2,100 mm * Platform thickness: 200 mm * Wheelbase: 10,530 mm * Axle spacing: 1,360 mm * Unladen weight: approx. 12,873 kg (±3%) * Gross weight (40 / 60 / 80 km/h): 42,000 kg * Total axle load: 24,000 kg * Permissible king pin load: 18,000 kg (40 / 60 / 80 km/h) Chassis & Axles * 2 axles Crjdpeycnbaofx Adroh * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension travel: 260 mm (190 mm / -70 mm) * Additional ride height lift by 40 mm possible * Load gauge for axle load display * Semi-automatic alignment of steered axles with warning light sensor Brake System * WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Brake system according to UN ECE R13 Electrics & Lighting * 24 V LED lighting system * 2 × 7-pin + 1 × 15-pin socket * LED brake lights * LED tail and fog lights * Electrical system according to UN ECE R48 & ADR * LED work lights at rear (2 units, reverse-controlled) * LED beacon (1 unit) Tyres & Rims * Tyre size: 245/70 R17.5 * Tyres: M+S * 3PMSF (winter suitable) * Tyre pressure monitoring system according to R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) * Spare wheel holder: 1 unit on the gooseneck Steering & Operation * Hydraulic steering on both axles * Control panel in the vehicle * Radio remote control for external steering * Multifunctional WABCO Smartboard * Axle load display * Suspension control * Tyre & brake wear monitoring * Breakdown & system monitoring Chassis & Frame * High-strength steel S700 MC (ISO 1726) * Welded bogie bed connection * Partial metallization (85% zinc / 15% aluminum) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2-inch, bolted * King pin position: single Platform & Body * 3 removable platforms with hardwood floor * Each platform size: 100 × 1,300 × 2,115 mm * Each platform weight: 225 kg * 2 × lashing rings per platform with 8,000 kg tensile force * Platform widening: 225 mm, galvanized * Extension clamps: 12 × 2 units, galvanized Load Securing Lashing rings: * 1 × 2 units 13.4 t on gooseneck * 7 × 2 units 13.4 t * 4 × 2 units 8 t in the lowbed * 2 × 2 units 13.4 t * 3 × 2 units 8 t on rear platform Stake pockets: * 6 × 2 units in the pool (50 × 100 mm) * 3 × 2 units at the rear (50 × 100 mm) Attachments & Accessories * Aluminum front panel on gooseneck: 360 × 1,550 mm * Aluminum side boards: 360 × 1,900 mm * Aluminum rear wall: 360 × 2,480 mm * Toolboxes right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73 * Extendable warning panels (423 × 423 mm, up to 1,000 mm) * Yellow side reflector tape * Red rear reflector tape For further information, we are at your disposal.

Condition: used, maximum load weight: 26,000 kg, overall weight: 36,000 kg, axle configuration: 2 axles, first registration: 04/2020, next inspection (TÜV): 04/2027, loading space length: 7,100 mm, loading space width: 2,550 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,450 mm, Year of construction: 2020, Equipment: ABS, Meusburger MPG-2 Jumbo Lowboy Trailer | 2 x hydraulically steered | Loading height 320 mm | ZSA VIN: 0M49970 CHASSIS / COMPONENTS * 2 axles * 2 x BPW Eco Plus * Both axles hydraulically steered * Air suspension * Central lubrication system * Hand pump for steering * Drum brakes * ABS * EBS braking system * 2-line compressed air connection * ABS electrical connection * 15-pole electrical connection * Axle distance: 1,310 mm BODY * Jumbo lowboy trailer * Saddle height: approx. 1,160 mm * Upper deck: approx. 3,775 mm * Lower deck: approx. 7,100 mm * Loading height on the lower deck: approx. 320 mm * Rear platform: approx. 2,670 mm TIRES * Tires: 245/70 R17.5 143/141 J * Axle 1: Remaining tread approx. 60 % / 60 % * Axle 2: Remaining tread approx. 60 % / 60 % WEIGHTS * Permissible total weight: 36,000 kg * Technically permissible total weight: 38,000 kg * Unladen weight: 10,000 kg * Payload: 26,000 kg OTHER Cjdpfxozrit Uj Adrjrh * Color: Blue * Year of manufacture: 2020 * First registration: 04/15/2020 * MOT: 04/2027 * Inspection: 10/2026 New MOT/inspection and weight adjustments (increase or decrease) are possible upon request. We won't leave you alone, even after the purchase: We will assist you in obtaining export or short-term license plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we are happy to help! We speak German, English and Russian. All information is subject to change without notice. Changes, errors, printing and spelling errors, and prior sale are reserved. About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of preparation and distribution of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. With us, it is not only the vehicle that counts, but also the service behind it. Fairness, seriousness and customer satisfaction are our top priorities. That is why we support you personally and reliably - from the first contact to the handover of your vehicle. Come and see for yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term license plates We will assist you in obtaining export or short-term license plates. Customs formalities We will also support you with customs matters. Vehicle transport Upon request, we will arrange for the transport of your vehicle within Germany.

Condition: new, overall weight: 47,000 kg, axle configuration: 2 axles, Year of construction: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Total weight: 47,000 kg Saddle load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3750 mm Saddle height loaded: 1200 mm Rear overhang: 2300 mm Loading area length: 6,850 mm Extendable by: 5,500 mm Loading height at max. load: 350 mm Frame length: 2,600 mm Loading height, rear frame at max. load approx.: 1,005 mm Suspension travel: -150/+450 mm Axle track: 1360 mm Overall width: 2,540 mm Total weight depends on the saddle load. Low-bed: Low-bed with external, extendable beams. "SUPER LOW" design, length approx. 6,850 mm. Low-bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking mechanism. The supply lines are protected in the extendable beams and automatically adjust to the respective low-bed length. 5 pairs of lashing rings, foldable outwards (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear frame: Rear frame with closed outer frame, diamond-plate flooring and continuous prism-shaped excavator well, approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of lashing rings, foldable outwards (LC 10,000 daN). 1 pair of lashing rings lying in the well (LC 8,000 daN + 5,300 daN). 2 pairs of stake pockets for stake pockets 100 x 50 mm in the outer frame. Gooseneck: Gooseneck in SNT design for optimizing the loading area length, length approx. 3,785 mm. Gooseneck hydraulically adjustable up/down and extendable. Technical saddle load: 23,000 kg For semi-trailer tractor: 4x2, 6x2 and 6x4 PENDULUM AXLE: "PENDULUM AXLE", all axles hydro-mechanically forced steered. Hose burst valve on the axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and quick-release coupling for securing in the raised position. Final coating of the axles with 2 layers of 2-component paint, solid color in "FAY-Gray-34-0260". Technical axle load: 12,000 kg Hydraulic axle equalization. Axle tool. Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the semi-trailer tractor. Electrical system: Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with Credpfsizu Nwox Adroh sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (Yield strength 355MPa) S690QL/S700MC (Yield strength 690MPa) Painting: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat, solid color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (Pure White). Metallic paint not possible. Tires: Tires 245/70 R 17.5 3PMSF At the manufacturer's option. Load index (146/146F) Preparation for mounting screwable container positioning for 1 x 20' or 1 x 40' container on the outer beams. Without container locking mechanisms. i i2" Kingpin iA galvanized steel front wall, approx. 400 mm high. iA spare wheel with holder in front of the front wall. i2 pieces of wheel chocks with holder on the front wall. iYellow-red air couplings on the galvanized front connection bar. Steering from the front and rear by means of a cable remote control via push buttons, with single-axle control. (without installation in the semi-trailer tractor) i Hydrauli

Condition: new, Year of construction: 2026, Equipment: ABS, 5 Axle Lowbed Cjdjrlm Txepfx Adrsrh Please get contact with us for more informaiton;

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 * Detachable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended Credexarmaopfx Adrsh * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: used, maximum load weight: 27,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2013, next inspection (TÜV): 08/2026, loading space length: 11,700 mm, loading space width: 3,000 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, * Gooseneck with storage boxes * Trailing axles Codpez A N Ansfx Adrsrh * Hydraulic loading ramps * Low-bed, extendable ----* Tire dimension: 235/75R17.5 * Technical total weight: 42,000 kg * Tare weight: 8,700 kg * Overall length: 13,150 mm * Next inspection due: 02/2027 ----Vehicle number: 12148----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/inspection approval, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services. ----?YOUR VTS TEAM