Used Nordson Adhesive Application System for sale (43,127)

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Iedpfx Asw Uf Tken Hetk Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AK2-SCBS201, input current: 230 A, For sale is a used ELS labeler/labeling station with a conveyor belt. The machine was acquired by us after we installed our own labeling system on our thermoforming packaging machine. The labeler was subsequently completely overhauled and tested for functionality. The system is mounted on a sturdy stainless steel/aluminum frame and features an integrated conveyor belt. The photos show labeling heads, roll holder, control panels, sensors, and mechanical adjustment options for adapting to different products or packaging. Data / Features: Manufacturer: ELS Type / Designation according to nameplate: AK2-SCBS201 Machine no. according to nameplate: 16615 / 2024 Labeling station with conveyor belt Height and position adjustment Stainless steel / aluminum construction Control panels on the labeling head Sensors included Completely overhauled Function tested Iedpfjzkucfjx An Hstk Condition: used, ready for operation The machine is suitable for use in packaging lines, e.g., for labeling packaged products, trays, boxes, or similar items. Before use, the system should be adjusted to the specific product and adapted to the corresponding label format. Note: Technical data such as label width, label length, belt width, connection values, and exact dimensions can be requested separately if needed or checked on-site. Inspection and testing possible by appointment. Errors and prior sale excepted.

Condition: used, Year of construction: 2008, functionality: fully functional, total height: 2,100 mm, total length: 1,800 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 255 kg, table load: 200 kg, input voltage: 400 V, A down-draft table combines a workbench with an exhaust/filtration system. Fumes and dust are extracted through the tabletop and rear panel and filtered by filters mounted in the table structure. The table can be placed anywhere, at any welding or grinding station. A three-stage spark separator enhances safety and meets the most stringent international guidelines for fumes and dust. Iedpfx Anezukv Ne Hotk DraftMax Advance features a manually operated filter cleaning mechanism activated by a button. In addition, the DraftMax Ultra model can be equipped with an automatic start/stop device, which provides even easier operation. This is an ideal table for very intensive welding or grinding applications. Work surface dimensions: 1366 mm x 750 mm Weight: 255 kg Noise level: 67 dB (version with silencer and HEPA filter) Supply voltage: 400 V/3~/50 Hz Motor power: 2.2 kW Capacity: 2500 m³/h Filtration area: 2 x 26 m² Filtration efficiency: >99.9% (filter class: M) HEPA filter (required for stainless steel welding) Noise silencer Stock number: 1151

Condition: good (used), Year of construction: 2014, 2x carton packaging machines, carton erectors, B&E Equipment / I-Pak – used: Price per unit, ex works: only €9,950 (net), with self-dismantling! Itsdpfx Aozbyn Nen Hjk Manufacturer: B&E Equipment / I-Pak Type: BA18H Year of manufacture: 2014 Serial numbers: 14/0558 and 14/0557 Each unit includes 1x Nordson ProBlue 4 hot melt adhesive applicator with 4-liter hot melt adhesive Weight: approx. 1,500 kg 400V, 8kW, 15A, 3 phases Condition: good Available: from approximately Q4/2026 Location: Hamburg A video of the machine is available!

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. Itodpfx Anszn N Eco Hsk • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Condition: used, Year of construction: 2024, operating hours: 4 h, functionality: fully functional, machine/vehicle number: B24AA452D3, LixelKity K1 with RTK Module – Demo Unit, Like New Condition For sale is a LixelKity K1 mobile mapping scanner, including an RTK module, offered as a demo unit in very good, like-new condition. The LixelKity K1 is a modern, high-precision 3D scanning system for the quick and efficient capture of buildings, construction sites, infrastructure projects, and terrain data. By combining LiDAR technology, high-resolution cameras, and RTK support, the system enables precise and georeferenced data acquisition in real time. Features: LixelKity K1 3D LiDAR scanner RTK module for centimeter-accurate positioning Integrated cameras for colored point clouds Mobile mapping system for indoor and outdoor use Compact and user-friendly design Original accessories included Application areas: Surveying and geodesy Construction and BIM projects As-built documentation Architecture and monument preservation Infrastructure and asset management Digital twins and 3D modeling Condition: Demo unit Technically flawless Optically in very good condition Itodpfx Aszfgimon Hjk Ready for immediate use Inspection and demonstration are possible by appointment. We will gladly send further information, technical data, and images upon request.

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Itsdpfxjyzc Rus An Hsk

Condition: used, Quantity: 4 units Itodozfi Tuopfx An Hsk Functionally tested; item originates from the dismantling of equipment from an automotive supplier. 3001 4294-2304 Atlas Copco Manufacturer: Atlas Copco Model: 3001 4294-2304 Component from Atlas Copco, part of an SCA control or connection unit for industrial applications. Used in automated production environments, particularly in adhesive and dispensing technology. Ideal for replacement, maintenance, or system expansion in existing Atlas Copco systems.

Condition: used, The Robatech Roba 40 nozzle glue system is a specialized adhesive application system designed for precise and efficient gluing operations. Manufactured by Robatech, this model is located in Germany, with pricing available upon request. The system is equipped with a 40 nozzle configuration, ensuring accurate and consistent adhesive application for various industrial and manufacturing needs. Format: Iedpfx Aevphzijn Hotk Equipment: 40 nozzles for consistent adhesive application

Condition: good (used), Year of construction: 2014, functionality: fully functional, For sale is a used Siat L36-150 TC-CE adhesive tape printing machine, manufactured in 2014. The machine is in good condition and fully functional. This machine was operated in our facility together with a dust extraction system, which is also to be sold: Manufacturer / Model: Siat L36 150 TC CE Year of manufacture: 2014 Condition: used, good Ijdpfx Aeza Synen Hotk Function: functional Application: printing adhesive tape CE marking: present Dust extraction system: FILTERBLOC CARBO-2000 ATEX (new, from 2023) We prefer to sell the machine as a complete package including the dust extraction system. The machine can be inspected by arrangement. Further technical data and photos are available upon request.

Condition: used, This listing is for a Solentim Cell Metric Cell Imaging System The unit is in full working condition and ready for immediate use This cell imaging system is a high-quality lab instrument manufactured by Solentim (Model: Cell Metric). A high-contrast clone imaging system designed to provide accurate and consistent performance for cellular analysis and monoclonality verification. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: Isdpozugbnofx An Hjtk By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, Prices upon request XG x 2800 5x Ca E200L 4x CA Dc 40 e The system was used for only 90 days and is in as-new condition. The XG-X2800LJ is a 2D/3D laser profile sensor from the LJ-V7000 series by KEYENCE Germany. This advanced image processing system offers enhanced features and flexibility for demanding inspection applications. Iodpfx Anjr Rddzs Hjtk Technical Data: Laser Scanner / Profile Measurement: The XG-X2800LJ is specifically designed for profile measurement and 2D/3D image processing. Compatibility: It is compatible with line-scan cameras, LJ-V sensors, and 21-megapixel cameras. Flowchart-Based Programming: The XG-X is intended for advanced users, enabling programming in a flowchart style. Manuals and Software: User manuals and software are available for configuration and customization via PC, as well as for remote control and capturing images and results on a PC. Please note that any shown accessories are for illustrative purposes only and may not be included with the product. For more information, please visit the official KEYENCE website. If you have further questions or require assistance, I am happy to help!

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: H513201129, type of input current: AC, input voltage: 220 V, measuring range X-axis: 750 mm, measuring range Y-axis: 50 mm, measuring range Z-axis: 250 mm, Selling a high-quality and fully functional Sony Magnescale 3-axis digital measuring system for machine tools, milling machines, special machines, or measurement tasks. The system comes from an industrial application and is in used, good condition. All components are functional, and the display works perfectly. Scope of delivery: Sony LH51-3 digital display (3 axes) Sony SR128-025 linear scale – measuring length 250 mm Sony SR128-045 linear scale – measuring length 450 mm Sony SR128-075 linear scale – measuring length 750 mm Sony TS-1 3D touch probe Extension cable Connection cable as shown in the photos Operating manual (digital as a PDF file) Technical data: 3-axis digital display Sony LH51-3 Measuring system: Sony Magnescale Axis X: SR128-075 – measuring length 750 mm Axis Y: SR128-045 – measuring length 450 mm Axis Z: SR128-025 – measuring length 250 mm Resolution up to 0.001 mm (adjustable depending on the device) Absolute and incremental mode Radius/diameter display Reference and zero point functions Industrial design for machine tools Note: Only the items shown in the photos are included in the sale. Please refer to the photos. Inspection and functional testing are possible by arrangement. Iedpszmxk Sefx An Hetk A functional video can be sent before shipping. Private sale, excluding any warranty, guarantee, or right of return. Keywords: Sony Magnescale, Sony LH51, LH51-3, Sony SR128, Sony TS-1, digital display, DRO, digital readout, displacement measuring system, linear scale, linear encoder, position display, milling machine, lathe, machine tool, CNC, machine retrofit, Heidenhain, Acu-Rite, Accurite, Fagor, Newall, Mitutoyo, RSF Elektronik, Renishaw, Renishaw encoder, Renishaw linear scale, Renishaw measuring probe, Sino, Easson, Anilam, machine DRO, scale for milling machine, digital display for milling machine, drilling machine.

Condition: used, Year of construction: 2009, Adhesive application machine Manufacturer: Wirth Type: LW 120.5/1300 Year of manufacture: 2009 Technical data - Roller width: 1300 mm - 2 rollers (application + metering) Itodpfjzuzvysx An Hok Note: The outfeed conveyor shown in the pictures is not included. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2002, Overview This ENOS Millenium self-adhesive labelling machine was manufactured in 2002 and is designed for the application of pressure-sensitive labels on glass bottles, particularly in wine production environments. The machine is equipped with three labelling stations, allowing the application of front, back, and seal labels. With a capacity of approximately 2,500 bottles per hour, the system is suitable for small to medium-sized production lines. The machine supports Bordeaux and Burgundy bottle formats, with corresponding format parts included. Its modular design and self-adhesive technology provide flexibility for different label applications and bottle types. Itedpfxeyxxxco An Hok Technical Data - Capacity: approx. 2,500 bottles per hour - Labelling technology: Pressure-sensitive (self-adhesive) - Number of stations: 3 - Applications - Front label - Back label - Seal label - Bottle Formats - Container type: Glass bottles Supported formats: - Bordeaux - Burgundy - Format parts: Included for both bottle types

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V • Frequency: 50/60 Hz • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density • Optional accessories: Itodpfx Anszu S Dbe Hek • 1x build cylinder • 2x powder supply cylinders • Cooler • Pallet truck • Unpacking station • 2x new filters • 11x aluminum build platforms • Vacuum conveyor system • Sieving machine with control unit • Optional accessories year: 2017 • Optional accessories condition: very good Availability: approx. Q3/2026

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed Iedpfx Ajrx S Ipsn Hstk - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Year of construction: 2014, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: 14040753, Hyfra water chiller eChilly 2 – Industrial cooling unit for welding machines For sale is a powerful Hyfra water chiller, type eChilly 2, in good condition. This unit was manufactured in Germany and is designed for reliable continuous operation in industrial environments. Iedpfx Anezqdu Rj Hstk The water chiller is ideally suited for cooling resistance welding machines, laser welding systems, and other water-cooled production machines. It impresses with its high cooling capacity, robust design, and reliable operation, even at high ambient temperatures. Technical data Manufacturer: Hyfra Type: eChilly 2 Year of manufacture: 2014 Cooling capacity: 2,810 W Design temperature: 32 °C Max. ambient temperature: +42 °C Refrigerant: R407C Voltage supply: 1/N/PE, 230 V, 50 Hz Max. current consumption: 10 A Power consumption: 1.8 kW Country of manufacture: Germany Highlights Powerful water chiller for industrial applications Ideal for welding machines and other water-cooled systems Robust industrial design High operational safety and reliable cooling performance Easy to maintain and long-lasting Quality product “Made in Germany” The chiller is in good condition and was in perfect working order until it was dismantled. Inspection and functional testing are possible at any time by appointment. Scope of delivery: Hyfra water chiller eChilly 2 as shown in the picture. Note: Sale due to company liquidation. All information has been provided to the best of our knowledge. Errors, prior sale, and changes are subject to change. The sale is made without warranty and guarantee.

Condition: good (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, total width: 2,400 mm, The Lamina Gluer is a manually fed, in-line folding, gluing, and taping machine. Thanks to its smart design, it can handle different sizes and materials. Tool-free setup enables quick changeovers, even for short production runs. Optional machine features include cold glue, rear support unit, working station, tape applicator, and more. The Lamina Gluer is a straight-in-line gluing machine built on a robust frame made of extruded, anodized aluminum profiles. The machine offers manual feeding as standard, with an optional automatic feeder for die-cut, creased, and slotted materials. The operator positions the blanks, and the hot melt unit applies adhesive as the material passes through the machine. Glue line length and exact position can be pre-set using a programmable logic controller (PLC) and a touchscreen interface. A system of pressure rollers ensures perfect adhesion and guides glued blanks onto a pull-out tray, which is easily adjustable for various sizes. The machine comes equipped with adjustable and interchangeable side guides, enabling efficient gluing of 2-piece boxes. The Lamina Gluer is supplied ready for connection to electric and pneumatic systems. Itedpfexwcwwsx An Hsk The Lamina Working Station is an additional option for the Lamina Gluer. Products are fed through the Gluer, which applies pre-programmed glue lines, and continue into the Working Station, where they are positioned on vacuum belts. A second piece is mounted and positioned using side lays and pneumatic stops for high-quality finishing. The unit can be adjusted for a wide range of products, from single- to multi-part displays and boxes, large back supports, shelves, and more. Transport The material is conveyed by four vacuum belts that bring the sheets to a stop bar for subsequent operations. The vacuum is generated by a fan that secures the sheets for optimal handling and precise registration. During production, the operator has full access above the sheets for additional mounting, thanks to the vacuum belt design. Pressure Rollers Material passes through two pressure rollers at the machine’s end for optimal adhesion. Registration Registration accuracy is +/- 1 mm and is achieved by a combination of photocell sensors and pusher guides. The operator uses a side lay guide to simplify the mounting process at the station.

Condition: excellent (used), Lasermax LX550 Roll Feed System with LX581 Module Roll-fed digital print finishing system Designed for continuous-feed digital printing applications Automatic web feeding and tension control Integrated touchscreen control High-volume production capability Suitable for transactional, direct mail and book production workflows Modular system design Made in Sweden Technical Data LX550 Power supply: 230 V, 1-phase, 50 Hz Power consumption: 1800 W Rated current: 10 A LX581 Power supply: 200–240 V, 1-phase, 50/60 Hz Power consumption: 1200 W Rated current: 10 A Circuit breaker: 15 A Machine Information Iedezaq Rfepfx An Hjtk LX550 Serial No: 09LX550034 LX581 Serial No: 09LX581002

Condition: used, Year of construction: 2007, operating hours: 14,700 h, machine/vehicle number: ET194, Labeling machine for sale with optical centering 6000 bphTechnical Specifications & Performance DataThis P.E. Labellers rotary adhesive labeler with optical centering is engineered for precision bottle decoration within a used bottling line or new installations. Built for consistent, high-quality labeling across beverage production environments, it balances speed with accuracy and repeatability.Manufacturer / Model: P.E. Labellers – 8T 4S 4E adhesive SL GlueYear of manufacture: 2007Production speed: up to 6,500 bottles per hour (bph)Stations / Plates: 4 adhesive stations; 8 motorized plates with dedicated photocellsOptical centering: Advanced system for precise label alignment on decorated, embossed, or irregular bottlesLabeling applications: Body, back, neck and optional L-/U-seal for caps (via dedicated adhesive unit on trolley)Container types: PET and glass bottles; adaptable for other rigid containers (e.g., aluminum) with appropriate format partsProducts: Suitable for water, juice, beer, wine, spirits, soft drinks, and moreDimensions (WxLxH): 2000 x 2900 x 2500 mmWeight: 2100 kgElectrical requirements: 380 V, 50 Hz, 5 kWConfiguration codes (OEM): No. of plates: 8; Rotation direction: 1; Plate movement: 2; Number of stations: 4; Labeling method: 0,4; Label placement: 0,1,2,4; Optical centering system: 2; Head adjustment: 1Advanced Automation & Control SystemsAutomation is designed for reliable, repeatable labeling within industrial packaging lines. A touchscreen HMI and integrated PLC control all machine functions, offering recipe-based changeovers and real-time diagnostics. Servo-driven or motorized plates work in concert with photocells for synchronous optical centering, supporting premium presentation at full speed.Touchscreen HMI with programmable recipes (memory for multiple label formats)Integrated PLC and modern electronics; inverter-driven speed modulationElectric lift for quick height adjustment of the carousel and heads4-axis head adjustment on trolley for precise head positioningPhotocell-controlled label application synchronized with optical centeringManuals available for operation, maintenance, and programmingProduction Line Integration CapabilitiesEngineered to integrate seamlessly upstream and downstream with rinsing, filling, and capping machines, as well as inspection systems, coders/inkjets, and secondary packaging (shrink, wrap-around, or case packing). This second hand labeler is ideal for upgrading or completing a used bottling line without compromising performance.Compatible with standard conveyors, accumulation tables, and line controlsFast format changes supported by stored recipes and mechanical referencesMulti-format flexibility for different bottle heights and diameters with the right format setsInterfaces available for line start/stop and speed cascade with fillin... Itodjvlnvrspfx An Hok

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards Itsdpfxjx Da Tis An Hsk • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2003031, total height: 1,550 mm, total width: 1,070 mm, total length: 1,670 mm, type of input current: AC, overall weight: 450 kg, input voltage: 220 V, Fully Servo Controlled Automatic Flow Wrapper / Pillow Packing Machine – KFD323 – Fully Working Fully automatic servo-controlled horizontal flow wrapping / pillow packing machine for sale. The machine is used, fully tested and in excellent working condition. It features a fully servo-controlled system, providing accurate and consistent control of product feeding, film movement, bag length and sealing. This is a high-speed industrial machine capable of running at up to 150 packs per minute, depending on the product, film and pack dimensions. The machine can be seen running and working before purchase, and a video of the machine in operation can also be provided. Main Specifications Model: KFD323 Machine Type: Automatic Horizontal Flow Wrapper / Pillow Packing Machine Control: Fully servo-controlled system Condition: Used – fully tested and working Production Year: 2020 Speed: 30–150 bags/min Power Supply: 220V / 50Hz Motor Power: 4.7 kW Heating Power: 2.1 kW Film Width: 80–370 mm Machine Weight: Approx. 450 kg Dimensions: Approx. 3670 × 1070 × 1550 mm Applications Suitable for high-speed automatic packaging of a wide range of products, including: Bakery products Biscuits and confectionery Food products Snack products Itsdszt Ugvspfx An Hjk Household products Hardware and components Medical/disposable products General consumer goods The machine produces professional pillow-style sealed packs and can be integrated into an existing production or packaging line. Condition The machine is fully operational and has been tested prior to sale. All main functions, servo controls, film feeding and sealing systems are working correctly. Ready to go straight into production. This is an excellent opportunity to purchase a fully servo-controlled high-speed flow wrapper at a fraction of the cost of a new machine. Viewing and inspection are welcome. A video showing the machine running is available on request. Please contact me for further information, additional photographs, videos, or to arrange a viewing.

Condition: used, EOS Transitube DCL 800/30 PM Powder Conveying System / Dosing System for 2 Components Description For sale is a used EOS Transitube DCL 800/30 PM powder conveying system from tim plast Anlagenbau GmbH. The system was developed for the continuous dosing, conveying, and homogenization of two material components. It is suitable for processing powders, granules, and ground materials in the plastics industry. The materials are dosed precisely, mixed via the Transitube conveying system, and continuously fed to the production machine. According to the manufacturer, the DCL series is designed for the continuous dosing and mixing of two components. Due to its robust industrial design and extensive scope of supply, the system is ideally suited for use with extrusion and injection molding machines. Technical Data Manufacturer: transitube / tim plast Anlagenbau GmbH Model: DCL 800/30 PM Designation: EOS Powder Conveying System Material hoppers: 2 × approx. 400 liters Conveying capacity: approx. 50–2,000 kg/h (material dependent) Dosing accuracy: ±0.5 to ±2 % Dosing range: 5–50 % Additive dosing: 0.2–10 % Mains connection: 3/N/PE 400 V AC Frequency: 50/60 Hz Connected power: 2.0 kW Dimensions (approx.): Width: 1,850 mm Depth: 900 mm Height: 1,320 mm Weight: approx. 180 kg Equipment 2 dosing hoppers with hinged lids Transitube screw dosing system Automatic control cabinet with touch panel Electrical control Conveying and mixing system Pneumatic components Flowserve Automax actuators Isdpfx Anozn H D Nj Hjtk Conveying motor with gearbox Extensive hose and pipe package Accessories as shown in the pictures Application areas Plastics processing Extrusion Injection molding technology Powder conveying Granule conveying Ground material dosing Material mixing Production automation Condition Used. The system is in good condition with normal signs of wear and tear consistent with its age. The scope of supply corresponds to the photos shown. Scope of supply EOS Transitube DCL 800/30 PM powder conveying system Control cabinet Conveying units Motors Pneumatic components Piping Conveying hoses Extensive accessories as shown in the pictures Shipping Inspection possible by appointment at any time. Loading onto a truck can be arranged. Europe-wide shipping by freight forwarder possible for an extra charge. Subject to prior sale and errors.

Year of construction: 2005, condition: used, functionality: limited functionality, Fischer / Stocker Electric Recirculating Oven with Blower, Year of manufacture: 2005 Upgraded 2022/23 including: - Additional insulation with cladding - Siemens control system with programmable selection and memory - Heat-resistant fan shaft, including repositioning of the fan unit within the chamber - Installation of three additional 1.5kW heating elements Iodpjyx H Swefx An Hstk Connection load: 45kW Increased heating capacity from original +250°C to +450°C Fully extendable slide-out floor Installation dimensions (D x W x H): 3,100mm x 2,750mm x 2,900mm (including attachments) Usable internal chamber dimensions (D x W x H): 2,500mm x 1,700mm x 1,500mm Originally used in GRP component production for aerospace parts, purchased second-hand by us in 2020 and modified as detailed above for curing/heat-setting paint jobs. Due to changing project requirements, this oven became too small for our needs and was never put into operation at our facility! Ideal for electrostatic and/or wet painting, tempering, or special applications! Electrically fully functional and thus immediately ready for operation. However, due to extended storage, partial touch-ups to adhesive seals (cladding) and door seals will likely be necessary! Price: net ex works, negotiable!